Prosíme přihlašte se nebo zaregistrujte.

Přihlašte se svým uživatelským jménem a heslem.
Vaše pomoc je stále potřeba!

Autor Téma: SVIDEO, VGA  (Přečteno 6793 krát)

Harad

  • Aktivní člen
  • *
  • Příspěvků: 194
SVIDEO, VGA
« kdy: 09 Října 2007, 10:34:26 »
Koupil Jsem si notebook FUJITSU-SIEMENS Amilo PRO V3545, jenž má ze strany na levém boku svdieo a VGA. Chtěl bych zprovoznit obě zařízení, SVIDEO pro filmy na televizi a VGA vlastně taky pro televizi (LCD Philips).
Můj xorg.conf vypadá následovně:
Kód: [Vybrat]
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
Fontpath "/usr/share/fonts/X11/misc"
Fontpath "/usr/share/fonts/X11/cyrillic"
Fontpath "/usr/share/fonts/X11/100dpi/:unscaled"
Fontpath "/usr/share/fonts/X11/75dpi/:unscaled"
Fontpath "/usr/share/fonts/X11/Type1"
Fontpath "/usr/share/fonts/X11/100dpi"
Fontpath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
Fontpath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "cz"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "Device"
Identifier "nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300]"
Driver "nvidia"
Busid "PCI:1:0:0"
Option "AddARGBVisuals" "True"
Option "AddARGBGLXVisuals" "True"
Option "NoLogo" "True"
EndSection

Section "Monitor"
Identifier "Obecný monitor"
Option "DPMS"
Horizsync 28-64
Vertrefresh 43-60
EndSection

Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300]"
Monitor "Obecný monitor"
Defaultdepth 24
SubSection "Display"
Depth 1
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
  screen "Default Screen"
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"
Inputdevice "stylus" "SendCoreEvents"
Inputdevice "cursor" "SendCoreEvents"
Inputdevice "eraser" "SendCoreEvents"
Inputdevice "Synaptics Touchpad"
EndSection

Section "DRI"
Mode 0666
EndSection

Zde na fóru jsem našel téma http://forum.ubuntu.cz/index.php?topic=10609.0, kde byly odkazy na:
http://www.abclinuxu.cz/forum/show/130804
http://aboutme.ic.cz/?q=node/40

Chci se zeptat, bude mi stačit pro SVIDEO přidat do sekce:
Kód: [Vybrat]
Section "Device"
Identifier "nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300]"
Driver "nvidia"
Busid "PCI:1:0:0"
Option "AddARGBVisuals" "True"
Option "AddARGBGLXVisuals" "True"
Option "NoLogo" "True"
EndSection
tyto řádky:
Kód: [Vybrat]
Option "TwinView"
Option "TwinViewOrientation" "Clone"
Option "ConnectedMonitor" "CRT, TV"
Option "SecondMonitorHorizSync" "30-50"
Option "SecondMonitorVertRefresh" "60"
Option "MetaModes" "1280x800,640x480"
Option "TVStandard" "PAL-G"
Option "TVOutFormat" "SVIDEO"
?

Pokud ano, jak tam přidat ještě to VGA?
Obraz chci, aby byl na displeji notebooku i TV přes SVIDEO, a notebooku a LCD v případě VGA.
Grafiku mám GeForce Go 7300, v nvidia-settings nemém v nastavení na výběr druhý monitor, i když je připojen. (oprava: vidí, jen jsem musel restartovat notebook. Nabízí mi ale jen max rozlišení 640x480 a jako rozšíření plochy...)
« Poslední změna: 07 Ledna 2008, 18:23:22 od Harad »

Harad

  • Aktivní člen
  • *
  • Příspěvků: 194
Re: SVIDEO, VGA
« Odpověď #1 kdy: 07 Ledna 2008, 17:56:55 »
Poradí někdo?

klasyc

  • Aktivní člen
  • *
  • Příspěvků: 470
Re: SVIDEO, VGA
« Odpověď #2 kdy: 08 Ledna 2008, 10:24:06 »
Podle mě nemá cenu editovat xorg. Je to dost velká alchymie a navíc když chceš připojit třeba TV, tak to není napořád. Doporučuju použít xrandr, kterým se nechá bez restartu x serveru zapínat videovstupy, měnit rozlišení apod. Už sem to tady psal dvoum lidem, tak použij hledání...

puba

  • Aktivní člen
  • *
  • Příspěvků: 225
HP Pavilion dv2058ea (Intel Core Duo 1,66GHz, 2GB RAM, Geforce 7200 Go - 256MB, WD-120 GB sata, WiFi, Bluetooth, ctecka 5in1 ), Ubuntu HH 8.04

 

Provoz zaštiťuje spolek OpenAlt.