Zdravím,
předesílám, že co se Linuxu týče, jsem úplný nováček. Mám jej asi týden. Mám problém s instalací ovladače pro mojí tiskárnu HP LaserJet Pro M1132 MFP. Zkoušel jsem všechno možné, co jsem vyčetl na internetu, ale nic mi nepomohlo. Tady na fóru je ohledně tohoto modelu 5 příspěvků. Nic z toho mi nefunguje. Může mi tu prosím někdo pomoci?
Mám nainstalovanou aktuální verzi hplip. Když spustím terminál a napíšu sudo hp-setup, tak to vypíše tohle:
HP Linux Imaging and Printing System (ver. 3.15.2)
Printer/Fax Setup Utility ver. 9.0
Copyright (c) 2001-15 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
error: HPLIP is not installed properly or is installed without graphical support. Please reinstall HPLIP
warning: Qt/PyQt 4 initialization failed.
error: hp-setup requires GUI support (try running with --qt3). Also, try using interactive (-i) mode.
Když zkusím sudo hp-setup --gt3, vypíše to:
HP Linux Imaging and Printing System (ver. 3.15.2)
Printer/Fax Setup Utility ver. 9.0
Copyright (c) 2001-15 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Installs HPLIP printers and faxes in the CUPS spooler. Tries to automatically determine the correct PPD file to use. Allows the printing of a testpage. Performs basic fax parameter setup.
Usage: hp-setup [MODE] [OPTIONS] [SERIAL NO.|USB bus:device|IP|DEVNODE]
[MODE]
Run in graphical -u or --gui (Default)
UI mode:
Run in interactive -i or --interactive
mode:
[OPTIONS]
Automatic mode: -a or --auto (-i mode only)
To specify the --port=<port> (Valid values are 1*, 2, and 3.
port on a *default)
multi-port
JetDirect:
No testpage in -x (-i mode only)
automatic mode:
To specify a CUPS -p<printer> or --printer=<printer> (-i mode only)
printer queue
name:
To specify a CUPS -f<fax> or --fax=<fax> (-i mode only)
fax queue name:
Type of queue(s) -t<typelist> or --type=<typelist>. <typelist>: print*,
to install: fax* (*default) (-i mode only)
To specify the -d<device> or --device=<device> (--qt4 mode only)
device URI to
install:
Remove printers or -r or --rm or --remove
faxes instead of
setting-up:
Set the language: --loc=<lang> or --lang=<lang>. Use --loc=? or --lang=?
to see a list of available language codes.
Set the logging -l<level> or --logging=<level>
level:
<level>: none, info*, error, warn, debug (*default)
Run in debug mode: -g (same as option: -ldebug)
This help -h or --help
information:
[SERIAL NO.|USB ID|IP|DEVNODE]
USB bus:device "xxx:yyy" where 'xxx' is the USB bus and 'yyy' is the
(usb only): USB device. (Note: The ':' and all leading zeros must
be present.)
Use the 'lsusb' command to obtain this information.
IPs (network IPv4 address "a.b.c.d" or "hostname"
only):
DEVNODE (parallel "/dev/parportX", X=0,1,2,...
only):
SERIAL NO. (usb "serial no."
and parallel
only):
Examples:
Setup using GUI $ hp-setup
mode:
Setup using GUI $ hp-setup -b usb
mode, specifying
usb:
Setup using GUI $ hp-setup 192.168.0.101
mode, specifying
an IP:
One USB printer $ hp-setup -i -a
attached,
automatic:
USB, IDs $ hp-setup -i 001:002
specified:
Network: $ hp-setup -i 66.35.250.209
Network, Jetdirect $ hp-setup -i --port=2 66.35.250.209
port 2:
Parallel: $ hp-setup -i /dev/parport0
USB or parallel, $ hp-setup -i US12345678A
using serial
number:
USB, automatic: $ hp-setup -i --auto 001:002
Parallel, $ hp-setup -i -a -x /dev/parport0
automatic, no
testpage:
Parallel, choose $ hp-setup -i -b par
device:
Notes:
1. If no serial number, USB ID, IP, or device node is specified, the USB and parallel busses will be probed for devices.
2. Using 'lsusb' to obtain USB IDs: (example)
$ lsusb
Bus 003 Device 011: ID 03f0:c202 Hewlett-Packard
$ hp-setup --auto 003:011
(Note: You may have to run 'lsusb' from /sbin or another location. Use '$ locate lsusb' to determine this.)
3. Parameters -a, -f, -p, or -t are not valid in GUI (-u) mode.
See Also:
hp-makeuri
hp-probe
error: option --gt3 not recognized
Když zkusím sudo hp-setup -i
enter
d, vypíše to:
HP Linux Imaging and Printing System (ver. 3.15.2)
Printer/Fax Setup Utility ver. 9.0
Copyright (c) 2001-15 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
(Note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.)
--------------------------------
| SELECT CONNECTION (I/O) TYPE |
--------------------------------
Num Connection Description
Type
-------- ---------- ----------------------------------------------------------
0* usb Universal Serial Bus (USB)
1 net Network/Ethernet/Wireless (direct connection or JetDirect)
2 par Parallel Port (LPT:)
Enter number 0...2 for connection type (q=quit, enter=usb*) ?
Using connection type: usb
Using device: hp:/usb/HP_LaserJet_Professional_M1132_MFP?serial=000000000QH69PPDSI1c
Setting up device: hp:/usb/HP_LaserJet_Professional_M1132_MFP?serial=000000000QH69PPDSI1c
------------------------
| PLUG-IN INSTALLATION |
------------------------
HP Linux Imaging and Printing System (ver. 3.15.2)
Plugin Download and Install Utility ver. 2.1
Copyright (c) 2001-15 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
(Note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.)
-----------------------------------------
| PLUG-IN INSTALLATION FOR HPLIP 3.15.2 |
-----------------------------------------
Option Description
---------- --------------------------------------------------
d Download plug-in from HP (recomended)
p Specify a path to the plug-in (advanced)
q Quit hp-plugin (skip installation)
Enter option (d=download*, p=specify path, q=quit) ? d
-------------------
| DOWNLOAD PLUGIN |
-------------------
Checking for network connection...
Downloading plug-in from:
Downloading plug-in: [\ ] 0%
error: /home/petr/.hplip/hplip-3.15.2-plugin.run file does not match its checksum. File may have been corrupted or altered
error: Failed to install Plugin.
hplip jsem zkoušel úplně odstranit a znovu nainstalovat jak ze Synapticu, tak z Terminálu. Nic nepomohlo a pořád to vypisuje to samé:
error: /home/petr/.hplip/hplip-3.15.2-plugin.run file does not match its checksum. File may have been corrupted or altered
error: Failed to install Plugin.
A tomuhle návodu moc nerozumím a už asi ani není aktuální:
http://www.abclinuxu.cz/hardware/vystupni-zarizeni/multifunkcni-zarizeni/hp-laserjet-m1132-mfpDíky za jakoukoliv radu, nebo snahu pomoci,
Petr
Téma: Ubu 15.04 - instalace ovladače pro tiskárnu HP LaserJet Pro M1132 MFP [vyřešeno] (Přečteno 6667 krát)