Zdravím,často mi "zamrzne" a zašedne obrazovka, myš přestane reagovat, počítač je v tu chvíli úplně neovladatelný. Někdy je to chvilkové, někdy vše zamrzne úplně, a to i tak, že se nelze přepnout do shellu a pozabíjet potřebné procesy. Stává se mi to hlavně při práci s okny - přepínání, otevírání, zavírání, ...
Domnívám se, že je to způsobeno nesprávným ovladačem grafické karty - systém nenajde ten pravý a vypůjčí si jiný, což způsobuje to zpomalení nebo úplné "zamrznutí". Nebo něčím jiným?
(Zkoušel jsem:
Nastavení systému -> Dodatečné ovladače, ale systém žádné nenajde.)
Víc už ze sebe asi nevypotím, na instalaci ovladače si bez rady netroufám, už jsem jednou takto experimentoval a skončilo to kolapsem systému, musel jsem jej kompletně přeinstalovat.
Vím, že se bez toho dá "žít", ale dost mi to zpomaluje práci a někdy musím násilně vypínat počítač.
Budu tedy vděčný za jakoukoliv užitečnou radu, ale pokud si také nejste jisti, raději to nechte být. Metoda pokus-omyl je v tomto případě asi moc riskantní.
Děkuji
Informace o vydání:Výpis příkazu
$ lsb_release -a:
$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 12.04.1 LTS
Release: 12.04
Codename: precise
Nastavení systému -> Podrobnosti -> Přehled:| Počítač: | HP Compaq 6720s |
| Paměť: | 1,9 GiB |
| Procesor: | Intel® Pentium(R) Dual CPU T2410 @ 2.00GHz × 2 |
| Grafika: | Intel® 965GME/GLE |
| Typ OS: | 64bitová |
| Disk: | 155,4 GB |
Nastavení systému -> Podrobnosti -> Grafika:| Ovladač: | Intel® 965GME/GLE |
| Režim: | Standardní |
Výpis příkazu
$ lspci | grep VGA:
$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Mobile GME965/GLE960 Integrated Graphics Controller (rev 0c)Výpis logu XORG.0.log
[ 23.349]
X.Org X Server 1.11.3
Release Date: 2011-12-16
[ 23.349] X Protocol Version 11, Revision 0
[ 23.349] Build Operating System: Linux 2.6.42-23-generic x86_64 Ubuntu
[ 23.349] Current Operating System: Linux karel-HP-Compaq-6720s 3.2.0-31-generic #50-Ubuntu SMP Fri Sep 7 16:16:45 UTC 2012 x86_64
[ 23.349] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-31-generic root=UUID=a5ec38b4-3f09-407c-af1a-870960c25a3e ro quiet splash vt.handoff=7
[ 23.349] Build Date: 29 August 2012 12:12:33AM
[ 23.349] xorg-server 2:1.11.4-0ubuntu10.8 (For technical support please see http://www.ubuntu.com/support)
[ 23.349] Current version of pixman: 0.24.4
[ 23.349] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 23.349] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 23.349] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 6 18:36:40 2012
[ 23.366] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 23.366] (==) No Layout section. Using the first Screen section.
[ 23.366] (==) No screen section available. Using defaults.
[ 23.366] (**) |-->Screen "Default Screen Section" (0)
[ 23.366] (**) | |-->Monitor "<default monitor>"
[ 23.367] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 23.367] (==) Automatically adding devices
[ 23.367] (==) Automatically enabling devices
[ 23.367] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 23.367] Entry deleted from font path.
[ 23.367] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 23.367] Entry deleted from font path.
[ 23.367] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 23.367] Entry deleted from font path.
[ 23.367] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 23.367] Entry deleted from font path.
[ 23.367] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 23.367] Entry deleted from font path.
[ 23.367] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 23.367] Entry deleted from font path.
[ 23.367] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 23.367] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 23.367] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 23.367] (II) Loader magic: 0x7fe6940e2b00
[ 23.367] (II) Module ABI versions:
[ 23.367] X.Org ANSI C Emulation: 0.4
[ 23.367] X.Org Video Driver: 11.0
[ 23.367] X.Org XInput driver : 16.0
[ 23.367] X.Org Server Extension : 6.0
[ 23.368] (--) PCI:*(0:0:2:0) 8086:2a12:103c:30d8 rev 12, Mem @ 0xe4300000/1048576, 0xd0000000/268435456, I/O @ 0x00004000/8
[ 23.369] (--) PCI: (0:0:2:1) 8086:2a13:103c:30d8 rev 12, Mem @ 0xe4400000/1048576
[ 23.369] (II) Open ACPI successful (/var/run/acpid.socket)
[ 23.369] (II) LoadModule: "extmod"
[ 23.427] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 23.427] (II) Module extmod: vendor="X.Org Foundation"
[ 23.427] compiled for 1.11.3, module version = 1.0.0
[ 23.427] Module class: X.Org Server Extension
[ 23.427] ABI class: X.Org Server Extension, version 6.0
[ 23.427] (II) Loading extension MIT-SCREEN-SAVER
[ 23.427] (II) Loading extension XFree86-VidModeExtension
[ 23.427] (II) Loading extension XFree86-DGA
[ 23.427] (II) Loading extension DPMS
[ 23.427] (II) Loading extension XVideo
[ 23.427] (II) Loading extension XVideo-MotionCompensation
[ 23.427] (II) Loading extension X-Resource
[ 23.427] (II) LoadModule: "dbe"
[ 23.427] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 23.427] (II) Module dbe: vendor="X.Org Foundation"
[ 23.427] compiled for 1.11.3, module version = 1.0.0
[ 23.427] Module class: X.Org Server Extension
[ 23.427] ABI class: X.Org Server Extension, version 6.0
[ 23.427] (II) Loading extension DOUBLE-BUFFER
[ 23.427] (II) LoadModule: "glx"
[ 23.428] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 23.428] (II) Module glx: vendor="X.Org Foundation"
[ 23.428] compiled for 1.11.3, module version = 1.0.0
[ 23.428] ABI class: X.Org Server Extension, version 6.0
[ 23.428] (==) AIGLX enabled
[ 23.428] (II) Loading extension GLX
[ 23.428] (II) LoadModule: "record"
[ 23.428] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 23.428] (II) Module record: vendor="X.Org Foundation"
[ 23.428] compiled for 1.11.3, module version = 1.13.0
[ 23.428] Module class: X.Org Server Extension
[ 23.428] ABI class: X.Org Server Extension, version 6.0
[ 23.428] (II) Loading extension RECORD
[ 23.428] (II) LoadModule: "dri"
[ 23.428] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 23.429] (II) Module dri: vendor="X.Org Foundation"
[ 23.429] compiled for 1.11.3, module version = 1.0.0
[ 23.429] ABI class: X.Org Server Extension, version 6.0
[ 23.429] (II) Loading extension XFree86-DRI
[ 23.429] (II) LoadModule: "dri2"
[ 23.429] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 23.429] (II) Module dri2: vendor="X.Org Foundation"
[ 23.429] compiled for 1.11.3, module version = 1.2.0
[ 23.429] ABI class: X.Org Server Extension, version 6.0
[ 23.429] (II) Loading extension DRI2
[ 23.429] (==) Matched intel as autoconfigured driver 0
[ 23.429] (==) Matched vesa as autoconfigured driver 1
[ 23.429] (==) Matched fbdev as autoconfigured driver 2
[ 23.429] (==) Assigned the driver to the xf86ConfigLayout
[ 23.429] (II) LoadModule: "intel"
[ 23.430] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 23.430] (II) Module intel: vendor="X.Org Foundation"
[ 23.430] compiled for 1.11.3, module version = 2.17.0
[ 23.430] Module class: X.Org Video Driver
[ 23.430] ABI class: X.Org Video Driver, version 11.0
[ 23.430] (II) LoadModule: "vesa"
[ 23.430] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 23.431] (II) Module vesa: vendor="X.Org Foundation"
[ 23.431] compiled for 1.11.3, module version = 2.3.0
[ 23.431] Module class: X.Org Video Driver
[ 23.431] ABI class: X.Org Video Driver, version 11.0
[ 23.431] (II) LoadModule: "fbdev"
[ 23.431] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 23.431] (II) Module fbdev: vendor="X.Org Foundation"
[ 23.431] compiled for 1.11.3, module version = 0.4.2
[ 23.431] ABI class: X.Org Video Driver, version 11.0
[ 23.431] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 23.431] (II) VESA: driver for VESA chipsets: vesa
[ 23.431] (II) FBDEV: driver for framebuffer: fbdev
[ 23.431] (++) using VT number 7
[ 23.434] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 23.434] (WW) Falling back to old probe method for vesa
[ 23.434] (WW) Falling back to old probe method for fbdev
[ 23.434] (II) Loading sub module "fbdevhw"
[ 23.434] (II) LoadModule: "fbdevhw"
[ 23.434] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 23.435] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 23.435] compiled for 1.11.3, module version = 0.0.2
[ 23.435] ABI class: X.Org Video Driver, version 11.0
[ 23.435] drmOpenDevice: node name is /dev/dri/card0
[ 23.435] drmOpenDevice: open result is 9, (OK)
[ 23.435] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 23.435] drmOpenDevice: node name is /dev/dri/card0
[ 23.435] drmOpenDevice: open result is 9, (OK)
[ 23.435] drmOpenByBusid: drmOpenMinor returns 9
[ 23.435] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 23.435] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 23.435] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 23.435] (==) intel(0): RGB weight 888
[ 23.435] (==) intel(0): Default visual is TrueColor
[ 23.435] (II) intel(0): Integrated Graphics Chipset: Intel(R) 965GME/GLE
[ 23.435] (--) intel(0): Chipset: "965GME/GLE"
[ 23.435] (**) intel(0): Relaxed fencing enabled
[ 23.435] (**) intel(0): Wait on SwapBuffers? enabled
[ 23.435] (**) intel(0): Triple buffering? enabled
[ 23.435] (**) intel(0): Framebuffer tiled
[ 23.435] (**) intel(0): Pixmaps tiled
[ 23.435] (**) intel(0): 3D buffers tiled
[ 23.435] (**) intel(0): SwapBuffers wait enabled
[ 23.435] (==) intel(0): video overlay key set to 0x101fe
[ 23.435] (II) intel(0): Output LVDS1 has no monitor section
[ 23.508] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 23.528] (II) intel(0): Output VGA1 has no monitor section
[ 23.837] (II) intel(0): Output TV1 has no monitor section
[ 23.837] (II) intel(0): EDID for output LVDS1
[ 23.837] (II) intel(0): Manufacturer: AUO Model: 8074 Serial#: 0
[ 23.837] (II) intel(0): Year: 2007 Week: 1
[ 23.837] (II) intel(0): EDID Version: 1.3
[ 23.837] (II) intel(0): Digital Display Input
[ 23.837] (II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 23.837] (II) intel(0): Gamma: 2.20
[ 23.837] (II) intel(0): No DPMS capabilities specified
[ 23.837] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 23.837] (II) intel(0): First detailed timing is preferred mode
[ 23.837] (II) intel(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555
[ 23.837] (II) intel(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
[ 23.837] (II) intel(0): Manufacturer's mask: 0
[ 23.837] (II) intel(0): Supported detailed timing:
[ 23.837] (II) intel(0): clock: 69.3 MHz Image Size: 331 x 207 mm
[ 23.837] (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1415 h_border: 0
[ 23.837] (II) intel(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 816 v_border: 0
[ 23.837] (II) intel(0): Unknown vendor-specific block f
[ 23.837] (II) intel(0): AUO
[ 23.837] (II) intel(0): B154EW08 V0
[ 23.837] (II) intel(0): EDID (in hex):
[ 23.837] (II) intel(0): 00ffffffffffff0006af748000000000
[ 23.837] (II) intel(0): 01110103802115780a1cf59758508e27
[ 23.837] (II) intel(0): 27505400000001010101010101010101
[ 23.837] (II) intel(0): 010101010101121b0087502010303020
[ 23.837] (II) intel(0): 36004bcf100000180000000f00000000
[ 23.837] (II) intel(0): 00000000000000000020000000fe0041
[ 23.837] (II) intel(0): 554f0a200020202020202020000000fe
[ 23.837] (II) intel(0): 004231353445573038205630200a0039
[ 23.837] (II) intel(0): EDID vendor "AUO", prod id 32884
[ 23.837] (II) intel(0): Printing DDC gathered Modelines:
[ 23.837] (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1328 1360 1415 800 803 809 816 -hsync -vsync (49.0 kHz)
[ 23.837] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 23.837] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 23.837] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 23.837] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 23.837] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 23.837] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 23.837] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 23.837] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 23.837] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 23.837] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 23.837] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 23.837] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 23.837] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 23.837] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 23.837] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 23.837] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 23.838] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 23.838] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 23.838] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 23.838] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 23.838] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 23.838] (II) intel(0): Printing probed modes for output LVDS1
[ 23.838] (II) intel(0): Modeline "1280x800"x60.0 69.30 1280 1328 1360 1415 800 803 809 816 -hsync -vsync (49.0 kHz)
[ 23.838] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 23.838] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 23.838] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 23.838] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 23.860] (II) intel(0): EDID for output VGA1
[ 24.149] (II) intel(0): EDID for output TV1
[ 24.149] (II) intel(0): Output LVDS1 connected
[ 24.149] (II) intel(0): Output VGA1 disconnected
[ 24.149] (II) intel(0): Output TV1 disconnected
[ 24.149] (II) intel(0): Using exact sizes for initial modes
[ 24.149] (II) intel(0): Output LVDS1 using initial mode 1280x800
[ 24.149] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 24.149] (II) intel(0): Kernel page flipping support detected, enabling
[ 24.149] (**) intel(0): Display dimensions: (330, 210) mm
[ 24.149] (**) intel(0): DPI set to (98, 96)
[ 24.149] (II) Loading sub module "fb"
[ 24.149] (II) LoadModule: "fb"
[ 24.149] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 24.149] (II) Module fb: vendor="X.Org Foundation"
[ 24.149] compiled for 1.11.3, module version = 1.0.0
[ 24.149] ABI class: X.Org ANSI C Emulation, version 0.4
[ 24.149] (II) Loading sub module "dri2"
[ 24.149] (II) LoadModule: "dri2"
[ 24.150] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 24.150] (II) Module dri2: vendor="X.Org Foundation"
[ 24.150] compiled for 1.11.3, module version = 1.2.0
[ 24.150] ABI class: X.Org Server Extension, version 6.0
[ 24.150] (II) UnloadModule: "vesa"
[ 24.150] (II) Unloading vesa
[ 24.150] (II) UnloadModule: "fbdev"
[ 24.150] (II) Unloading fbdev
[ 24.150] (II) UnloadModule: "fbdevhw"
[ 24.150] (II) Unloading fbdevhw
[ 24.150] (==) Depth 24 pixmap format is 32 bpp
[ 24.150] (II) intel(0): [DRI2] Setup complete
[ 24.150] (II) intel(0): [DRI2] DRI driver: i965
[ 24.150] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled
[ 24.163] (II) UXA(0): Driver registered support for the following operations:
[ 24.164] (II) solid
[ 24.164] (II) copy
[ 24.164] (II) composite (RENDER acceleration)
[ 24.164] (II) put_image
[ 24.164] (II) get_image
[ 24.164] (==) intel(0): Backing store disabled
[ 24.164] (==) intel(0): Silken mouse enabled
[ 24.164] (II) intel(0): Initializing HW Cursor
[ 24.180] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 24.181] (==) intel(0): DPMS enabled
[ 24.181] (==) intel(0): Intel XvMC decoder enabled
[ 24.181] (II) intel(0): Set up textured video
[ 24.181] (II) intel(0): Set up overlay video
[ 24.181] (II) intel(0): [XvMC] i965_xvmc driver initialized.
[ 24.181] (II) intel(0): direct rendering: DRI2 Enabled
[ 24.181] (==) intel(0): hotplug detection: "enabled"
[ 24.181] (--) RandR disabled
[ 24.181] (II) Initializing built-in extension Generic Event Extension
[ 24.181] (II) Initializing built-in extension SHAPE
[ 24.181] (II) Initializing built-in extension MIT-SHM
[ 24.181] (II) Initializing built-in extension XInputExtension
[ 24.181] (II) Initializing built-in extension XTEST
[ 24.181] (II) Initializing built-in extension BIG-REQUESTS
[ 24.181] (II) Initializing built-in extension SYNC
[ 24.181] (II) Initializing built-in extension XKEYBOARD
[ 24.181] (II) Initializing built-in extension XC-MISC
[ 24.181] (II) Initializing built-in extension SECURITY
[ 24.181] (II) Initializing built-in extension XINERAMA
[ 24.181] (II) Initializing built-in extension XFIXES
[ 24.181] (II) Initializing built-in extension RENDER
[ 24.181] (II) Initializing built-in extension RANDR
[ 24.181] (II) Initializing built-in extension COMPOSITE
[ 24.181] (II) Initializing built-in extension DAMAGE
[ 24.193] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 24.193] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 24.193] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 24.193] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 24.193] (II) AIGLX: Loaded and initialized i965
[ 24.193] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 24.193] (II) intel(0): Setting screen physical size to 338 x 211
[ 24.202] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 24.206] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 24.206] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 24.206] (II) LoadModule: "evdev"
[ 24.207] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 24.207] (II) Module evdev: vendor="X.Org Foundation"
[ 24.207] compiled for 1.11.3, module version = 2.7.0
[ 24.207] Module class: X.Org XInput Driver
[ 24.207] ABI class: X.Org XInput driver, version 16.0
[ 24.207] (II) Using input driver 'evdev' for 'Power Button'
[ 24.207] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 24.207] (**) Power Button: always reports core events
[ 24.207] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 24.207] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 24.207] (--) evdev: Power Button: Found keys
[ 24.207] (II) evdev: Power Button: Configuring as keyboard
[ 24.207] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 24.207] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 24.207] (**) Option "xkb_rules" "evdev"
[ 24.207] (**) Option "xkb_model" "pc105"
[ 24.207] (**) Option "xkb_layout" "cz"
[ 24.210] (II) XKB: reuse xkmfile /var/lib/xkb/server-583B992BBA3776030BA62AC94FC7F0AE9B04119F.xkm
[ 24.211] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 24.211] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 24.211] (II) Using input driver 'evdev' for 'Video Bus'
[ 24.211] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 24.211] (**) Video Bus: always reports core events
[ 24.211] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 24.211] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 24.211] (--) evdev: Video Bus: Found keys
[ 24.211] (II) evdev: Video Bus: Configuring as keyboard
[ 24.211] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5/event5"
[ 24.211] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 24.211] (**) Option "xkb_rules" "evdev"
[ 24.211] (**) Option "xkb_model" "pc105"
[ 24.211] (**) Option "xkb_layout" "cz"
[ 24.212] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 24.212] (II) No input driver specified, ignoring this device.
[ 24.212] (II) This device may have been added with another device file.
[ 24.212] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[ 24.212] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 24.212] (II) Using input driver 'evdev' for 'Sleep Button'
[ 24.212] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 24.212] (**) Sleep Button: always reports core events
[ 24.212] (**) evdev: Sleep Button: Device: "/dev/input/event0"
[ 24.212] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 24.212] (--) evdev: Sleep Button: Found keys
[ 24.212] (II) evdev: Sleep Button: Configuring as keyboard
[ 24.212] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0/event0"
[ 24.212] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 24.212] (**) Option "xkb_rules" "evdev"
[ 24.212] (**) Option "xkb_model" "pc105"
[ 24.212] (**) Option "xkb_layout" "cz"
[ 24.213] (II) config/udev: Adding input device Primax USB OPTICAL MOUSE (/dev/input/event4)
[ 24.213] (**) Primax USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[ 24.213] (II) Using input driver 'evdev' for 'Primax USB OPTICAL MOUSE'
[ 24.213] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 24.213] (**) Primax USB OPTICAL MOUSE: always reports core events
[ 24.213] (**) evdev: Primax USB OPTICAL MOUSE: Device: "/dev/input/event4"
[ 24.213] (--) evdev: Primax USB OPTICAL MOUSE: Vendor 0x461 Product 0x4de3
[ 24.213] (--) evdev: Primax USB OPTICAL MOUSE: Found 9 mouse buttons
[ 24.213] (--) evdev: Primax USB OPTICAL MOUSE: Found scroll wheel(s)
[ 24.213] (--) evdev: Primax USB OPTICAL MOUSE: Found relative axes
[ 24.213] (--) evdev: Primax USB OPTICAL MOUSE: Found x and y relative axes
[ 24.213] (II) evdev: Primax USB OPTICAL MOUSE: Configuring as mouse
[ 24.213] (II) evdev: Primax USB OPTICAL MOUSE: Adding scrollwheel support
[ 24.213] (**) evdev: Primax USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[ 24.213] (**) evdev: Primax USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 24.213] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.0/input/input4/event4"
[ 24.213] (II) XINPUT: Adding extended input device "Primax USB OPTICAL MOUSE" (type: MOUSE, id 9)
[ 24.214] (II) evdev: Primax USB OPTICAL MOUSE: initialized for relative axes.
[ 24.214] (**) Primax USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[ 24.214] (**) Primax USB OPTICAL MOUSE: (accel) acceleration profile 0
[ 24.214] (**) Primax USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[ 24.214] (**) Primax USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[ 24.214] (II) config/udev: Adding input device Primax USB OPTICAL MOUSE (/dev/input/mouse0)
[ 24.214] (II) No input driver specified, ignoring this device.
[ 24.214] (II) This device may have been added with another device file.
[ 24.215] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 24.215] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 24.215] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 24.215] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 24.215] (**) AT Translated Set 2 keyboard: always reports core events
[ 24.215] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 24.215] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 24.215] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 24.215] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 24.215] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 24.215] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 24.215] (**) Option "xkb_rules" "evdev"
[ 24.215] (**) Option "xkb_model" "pc105"
[ 24.215] (**) Option "xkb_layout" "cz"
[ 24.216] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 24.216] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 24.216] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 24.216] (II) LoadModule: "synaptics"
[ 24.216] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 24.216] (II) Module synaptics: vendor="X.Org Foundation"
[ 24.216] compiled for 1.11.3, module version = 1.6.2
[ 24.216] Module class: X.Org XInput Driver
[ 24.216] ABI class: X.Org XInput driver, version 16.0
[ 24.216] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 24.216] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 24.216] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 24.216] (**) Option "Device" "/dev/input/event6"
[ 24.241] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[ 24.241] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[ 24.241] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 24.241] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 24.241] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right
[ 24.241] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 24.241] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 24.241] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 24.264] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input6/event6"
[ 24.264] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[ 24.264] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 24.264] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 24.264] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
[ 24.264] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 24.264] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 24.264] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 24.264] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 24.264] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 24.265] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 24.265] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 24.267] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event7)
[ 24.267] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 24.267] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[ 24.267] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 24.267] (**) HP WMI hotkeys: always reports core events
[ 24.267] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event7"
[ 24.267] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[ 24.267] (--) evdev: HP WMI hotkeys: Found keys
[ 24.267] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[ 24.267] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"
[ 24.267] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 12)
[ 24.267] (**) Option "xkb_rules" "evdev"
[ 24.267] (**) Option "xkb_model" "pc105"
[ 24.267] (**) Option "xkb_layout" "cz"
[ 26.125] (II) intel(0): EDID vendor "AUO", prod id 32884
[ 26.125] (II) intel(0): Printing DDC gathered Modelines:
[ 26.125] (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1328 1360 1415 800 803 809 816 -hsync -vsync (49.0 kHz)
[ 29.046] (II) intel(0): EDID vendor "AUO", prod id 32884
[ 29.046] (II) intel(0): Printing DDC gathered Modelines:
[ 29.046] (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1328 1360 1415 800 803 809 816 -hsync -vsync (49.0 kHz)
[ 30.631] (II) intel(0): EDID vendor "AUO", prod id 32884
[ 30.631] (II) intel(0): Printing DDC gathered Modelines:
[ 30.631] (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1328 1360 1415 800 803 809 816 -hsync -vsync (49.0 kHz)
[ 37.471] (II) XKB: reuse xkmfile /var/lib/xkb/server-03AF3717FF3AB439A4BAABA686CCB40771CDF520.xkm
[ 51.584] (II) intel(0): EDID vendor "AUO", prod id 32884
[ 51.584] (II) intel(0): Printing DDC gathered Modelines:
[ 51.584] (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1328 1360 1415 800 803 809 816 -hsync -vsync (49.0 kHz)
Myslím, že klíčové jsou tyto řádky:
...
[ 23.367] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 23.367] Entry deleted from font path.
[ 23.367] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 23.367] Entry deleted from font path.
[ 23.367] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 23.367] Entry deleted from font path.
[ 23.367] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 23.367] Entry deleted from font path.
[ 23.367] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 23.367] Entry deleted from font path.
[ 23.367] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
...
[ 23.434] (WW) Falling back to old probe method for vesa
[ 23.434] (WW) Falling back to old probe method for fbdev
...
Téma: Problém s ovladačem grafické karty u HP Compaq 6720s [ VYŘEŠENO ] (Přečteno 1910 krát)