Prosíme přihlašte se nebo zaregistrujte.

Přihlašte se svým uživatelským jménem a heslem.
Vaše pomoc je stále potřeba!

Autor Téma: Problém s bootováním systému  (Přečteno 2334 krát)

loxx

  • Návštěvník
  • Příspěvků: 37
Problém s bootováním systému
« kdy: 30 Ledna 2008, 23:26:18 »
Dobrý den. Měl jsem v PC 4 pevné disky. Na prvním bootovacím ubuntu. na třetím XP. 2. disk mi odešel, takže mám teď XP na druhém disku v pořadí a když dám při zapnutí PC z nabídky operačních systémů spustit Win XP, nic nenajede, chyba Grub nebo tak. Neví někdo co s tím, zda existuje nějaký refresh příkaz na bootování systémů?

Pavel Půlpán

Re: Problém s bootováním systému
« Odpověď #1 kdy: 30 Ledna 2008, 23:27:47 »
A Linux bootuje? Samozřejmě to opravit jde. Grub patrně jenom přečísloval device. ;)

A propo, číslo chyby?

klasyc

  • Aktivní člen
  • *
  • Příspěvků: 470
Re: Problém s bootováním systému
« Odpověď #2 kdy: 30 Ledna 2008, 23:56:41 »
hádám, že musíte upravit soubor /boot/grub/menu.lst - najděte řádek s odkazem na windows a u něj bude napsané označení disku - něco jako (hd2,0) - to musíte upravit podle Vaší aktuální situace. Tj. pokud byl disk s winXP třetí a teď je druhý, budete muset změnit hd2 na hd1

loxx

  • Návštěvník
  • Příspěvků: 37
Re: Problém s bootováním systému
« Odpověď #3 kdy: 31 Ledna 2008, 00:49:44 »
# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default      0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout      10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title      Windows 95/98/NT/2000
# root      (hd0,0)
# makeactive
# chainloader   +1
#
# title      Linux
# root      (hd0,1)
# kernel   /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=46692ec1-5606-4c2d-80c1-a0af0a10a351 ro

## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,0)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash locale=cs_CZ

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title      Ubuntu 7.10, kernel 2.6.22-14-generic
root      (hd0,0)
kernel      /boot/vmlinuz-2.6.22-14-generic root=UUID=46692ec1-5606-4c2d-80c1-a0af0a10a351 ro quiet splash locale=cs_CZ
initrd      /boot/initrd.img-2.6.22-14-generic
quiet

title      Ubuntu 7.10, kernel 2.6.22-14-generic (recovery mode)
root      (hd0,0)
kernel      /boot/vmlinuz-2.6.22-14-generic root=UUID=46692ec1-5606-4c2d-80c1-a0af0a10a351 ro single
initrd      /boot/initrd.img-2.6.22-14-generic

title      Ubuntu 7.10, memtest86+
root      (hd0,0)
kernel      /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title      Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title      Microsoft Windows XP Professional
root      (hd2,0)
savedefault
makeactive
map      (hd0) (hd2)
map      (hd2) (hd0)
chainloader   +1


předpokládám, že mám změnit v posledním odstavci (hd2) na (hd1) ale kde všude to mám přepsat, jenom v tom posledním odstavci, nebo i něco jinde a nějaké jiné hodnoty?
« Poslední změna: 31 Ledna 2008, 10:54:52 od Anna Taliánová »

qUAKER

  • Host
Re: Problém s bootováním systému
« Odpověď #4 kdy: 31 Ledna 2008, 10:23:05 »
prikazem sudo update-grub by se to melo udelat automaticky
« Poslední změna: 31 Ledna 2008, 10:55:24 od Anna Taliánová »

luisah

  • Závislák
  • ***
  • Příspěvků: 3704
Re: Problém s bootováním systému
« Odpověď #5 kdy: 31 Ledna 2008, 11:05:49 »
loxx mělo by to tak být, root (hd1,0) a i map na z hd2 na hd1

 

Provoz zaštiťuje spolek OpenAlt.