Prosíme přihlašte se nebo zaregistrujte.

Přihlašte se svým uživatelským jménem a heslem.
Vaše pomoc je stále potřeba!

Novinky: Děkujeme všem návštěvníkům fóra, kteří ochotně radí ostatním. Vaše práce je velmi potřebná a vážíme si jí.

Autor Téma: Externí disk WD Scorpio  (Přečteno 957 krát)

canonpixma

  • Návštěvník
  • *
  • Příspěvků: 6
  • Karma: +0/-0
    • Zobrazit profil
Externí disk WD Scorpio
« kdy: 03 Únor 2018, 13:17:45 »
Čau, mám problém s harddiskem ze starýho notebooku. Vyndal jsem ho, koupil na něj krabičku Axagon Slimport 3 a přes usb ho připojoval ke svému pc. Teď to ale přestalo jít. Neví někdo co s tím mám udělat, aby to zase šlo?

Disk: Western digital Scorpio, WD2500BEVS-22UST0
           Drive parameters: LBA 488397168
           Product of Malaysia

Ubuntu: 16.04 LTS 64bit

Výpis z dmesg:
dmesg
[   14.324222] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000429-0x0000000000000429 (\PM2S) (20170531/utaddress-247)
[   14.324232] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.324234] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x00000000000004B8-0x00000000000004BB (\GPO2) (20170531/utaddress-247)
[   14.324239] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.324241] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x000000000000048C-0x000000000000048F (\GPO) (20170531/utaddress-247)
[   14.324245] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.324246] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   14.475578] leds_ss4200: no LED devices found
[   14.748848] coretemp coretemp.0: Using relative temperature scale!
[   14.748887] coretemp coretemp.0: Using relative temperature scale!
[   15.087181] snd_hda_codec_realtek hdaudioC0D0: ALC888: SKU not ready 0x411111f0
[   15.087592] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   15.087595] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=1 (0x15/0x0/0x0/0x0/0x0)
[   15.087597] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   15.087599] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   15.087601] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   15.087604] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   15.087606] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   15.087608] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   15.100082] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   15.100181] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   15.100270] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   15.100360] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   15.100453] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   15.261959] intel_powerclamp: No package C-state available
[   15.309830] intel_powerclamp: No package C-state available
[   16.095989] floppy0: no floppy controllers found
[   19.939400] audit: type=1400 audit(1517657864.027:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=679 comm="apparmor_parser"
[   19.939406] audit: type=1400 audit(1517657864.027:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=679 comm="apparmor_parser"
[   19.939410] audit: type=1400 audit(1517657864.027:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=679 comm="apparmor_parser"
[   19.939413] audit: type=1400 audit(1517657864.027:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=679 comm="apparmor_parser"
[   19.953254] audit: type=1400 audit(1517657864.041:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=678 comm="apparmor_parser"
[   19.953261] audit: type=1400 audit(1517657864.041:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=678 comm="apparmor_parser"
[   20.067635] audit: type=1400 audit(1517657864.156:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3887/usr/lib/snapd/snap-confine" pid=681 comm="apparmor_parser"
[   20.067642] audit: type=1400 audit(1517657864.156:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3887/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=681 comm="apparmor_parser"
[   20.067645] audit: type=1400 audit(1517657864.156:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3887/usr/lib/snapd/snap-confine//snap_update_ns" pid=681 comm="apparmor_parser"
[   20.068301] audit: type=1400 audit(1517657864.156:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3748/usr/lib/snapd/snap-confine" pid=680 comm="apparmor_parser"
[   21.474281] Adding 3396604k swap on /dev/sda5.  Priority:-1 extents:1 across:3396604k FS
[   31.769589] IPv6: ADDRCONF(NETDEV_UP): enp2s8: link is not ready
[   31.789692] IPv6: ADDRCONF(NETDEV_UP): enp2s8: link is not ready
[   31.797928] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[   32.099807] r8169 0000:01:00.0 enp1s0: link down
[   32.099931] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[   32.101222] r8169 0000:01:00.0 enp1s0: link down
[   34.590746] r8169 0000:01:00.0 enp1s0: link up
[   34.590760] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
[   34.785197] kauditd_printk_skb: 25 callbacks suppressed
[   34.785200] audit: type=1400 audit(1517657878.873:37): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/3887/usr/lib/snapd/snap-confine" pid=1016 comm="apparmor_parser"
[   34.800519] audit: type=1400 audit(1517657878.889:38): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/3887/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1016 comm="apparmor_parser"
[   34.800838] audit: type=1400 audit(1517657878.889:39): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/3887/usr/lib/snapd/snap-confine//snap_update_ns" pid=1016 comm="apparmor_parser"
[   35.121340] audit: type=1400 audit(1517657879.210:40): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=1021 comm="apparmor_parser"
[  111.321831] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based  firewall rule not found. Use the iptables CT target to attach helpers instead.
[  144.071548] usb 1-3: new high-speed USB device number 4 using ehci-pci
[  144.260872] usb 1-3: New USB device found, idVendor=4971, idProduct=8017
[  144.260876] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  144.260879] usb 1-3: Product: AXAGON USB to SATA Adapter
[  144.260882] usb 1-3: Manufacturer: JMicron
[  144.260885] usb 1-3: SerialNumber: 111122223333
[  144.327666] usbcore: registered new interface driver usb-storage
[  144.347381] scsi host2: uas
[  144.348757] usbcore: registered new interface driver uas
[  144.349401] scsi 2:0:0:0: Direct-Access     WDC WD25 00BEVS-22UST0    8105 PQ: 0 ANSI: 6
[  144.384273] sd 2:0:0:0: Attached scsi generic sg2 type 0
[  144.384624] sd 2:0:0:0: [sdb] Spinning up disk...
[  144.394228] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=fe80:0000:0000:0000:f075:0883:872b:b065 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=614116 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[  144.394262] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=fe80:0000:0000:0000:f075:0883:872b:b065 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=915685 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[  144.404439] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=fe80:0000:0000:0000:f075:0883:872b:b065 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=614116 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[  144.404467] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=fe80:0000:0000:0000:f075:0883:872b:b065 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=915685 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[  145.407618] .
[  146.431668] .
[  147.455725] .
[  148.479809] .
[  149.507822] .
[  150.527872] .
[  151.551906] .
[  152.575960] .
[  153.600002] .
[  154.624043] .
[  155.648077] .
[  156.672118] .
[  157.696159] .
[  158.720192] .
[  159.744229] .
[  160.772266] .
[  161.792306] .
[  162.816350] .
[  163.840378] .
[  164.864425] .
[  164.864883] not responding...
[  164.865263] sd 2:0:0:0: [sdb] Read Capacity(16) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  164.865267] sd 2:0:0:0: [sdb] Sense Key : Hardware Error [current]
[  164.865273] sd 2:0:0:0: [sdb] ASC=0x44 <<vendor>>ASCQ=0x81
[  164.865636] sd 2:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  164.865639] sd 2:0:0:0: [sdb] Sense Key : Hardware Error [current]
[  164.865643] sd 2:0:0:0: [sdb] ASC=0x44 <<vendor>>ASCQ=0x81
[  164.866390] sd 2:0:0:0: [sdb] 0 512-byte logical blocks: (0 B/0 B)
[  164.866392] sd 2:0:0:0: [sdb] 0-byte physical blocks
[  164.866763] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
[  164.866887] sd 2:0:0:0: [sdb] Asking for cache data failed
[  164.866893] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[  164.867883] sd 2:0:0:0: [sdb] Unit Not Ready
[  164.867887] sd 2:0:0:0: [sdb] Sense Key : Hardware Error [current]
[  164.867892] sd 2:0:0:0: [sdb] ASC=0x44 <<vendor>>ASCQ=0x81
[  164.872726] sd 2:0:0:0: [sdb] Read Capacity(16) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  164.872731] sd 2:0:0:0: [sdb] Sense Key : Hardware Error [current]
[  164.872737] sd 2:0:0:0: [sdb] ASC=0x44 <<vendor>>ASCQ=0x81
[  164.873138] sd 2:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  164.873142] sd 2:0:0:0: [sdb] Sense Key : Hardware Error [current]
[  164.873146] sd 2:0:0:0: [sdb] ASC=0x44 <<vendor>>ASCQ=0x81
[  164.874644] sd 2:0:0:0: [sdb] Attached SCSI disk
[  165.004823] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=fe80:0000:0000:0000:f075:0883:872b:b065 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=614116 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[  165.004859] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=fe80:0000:0000:0000:f075:0883:872b:b065 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=915685 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[  165.015106] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=fe80:0000:0000:0000:f075:0883:872b:b065 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=614116 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[  165.015209] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=fe80:0000:0000:0000:f075:0883:872b:b065 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=915685 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[  218.695228] usb 1-3: USB disconnect, device number 4
[  218.873818] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=fe80:0000:0000:0000:f075:0883:872b:b065 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=614116 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[  218.873856] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=fe80:0000:0000:0000:f075:0883:872b:b065 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=915685 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[  218.884063] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=fe80:0000:0000:0000:f075:0883:872b:b065 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=614116 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[  218.884091] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=fe80:0000:0000:0000:f075:0883:872b:b065 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=915685 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[  420.260220] perf: interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
[  483.293688] perf: interrupt took too long (3136 > 3128), lowering kernel.perf_event_max_sample_rate to 63750
[  587.053110] perf: interrupt took too long (3928 > 3920), lowering kernel.perf_event_max_sample_rate to 50750
[  712.475555] perf: interrupt took too long (4921 > 4910), lowering kernel.perf_event_max_sample_rate to 40500
[  821.672847] usb 1-4: new high-speed USB device number 5 using ehci-pci
[  821.858142] usb 1-4: New USB device found, idVendor=4971, idProduct=8017
[  821.858146] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  821.858150] usb 1-4: Product: AXAGON USB to SATA Adapter
[  821.858153] usb 1-4: Manufacturer: JMicron
[  821.858156] usb 1-4: SerialNumber: 111122223333
[  821.860304] scsi host2: uas
[  821.864930] scsi 2:0:0:0: Direct-Access     WDC WD25 00BEVS-22UST0    8105 PQ: 0 ANSI: 6
[  821.897677] sd 2:0:0:0: Attached scsi generic sg2 type 0
[  821.898156] sd 2:0:0:0: [sdb] Spinning up disk...
[  822.021563] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=fe80:0000:0000:0000:f075:0883:872b:b065 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=614116 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[  822.021594] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=fe80:0000:0000:0000:f075:0883:872b:b065 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=915685 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[  822.031793] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=fe80:0000:0000:0000:f075:0883:872b:b065 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=614116 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[  822.031821] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=fe80:0000:0000:0000:f075:0883:872b:b065 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=915685 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[  822.932893] .
[  823.956912] .
[  824.980934] .
[  826.004969] .
[  827.028974] .
[  828.053020] .
[  829.077053] .
[  830.101052] .
[  831.125089] .
[  832.149094] .
[  833.173128] .
[  834.197163] .
[  835.221191] .
[  836.245196] .
[  837.269226] .
[  838.293267] .
[  839.317267] .
[  840.341310] .
[  841.365338] .
[  842.389358] .
[  843.413370] .
[  844.437393] .
[  845.461427] .
[  845.461901] not responding...
[  845.462284] sd 2:0:0:0: [sdb] Read Capacity(16) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  845.462288] sd 2:0:0:0: [sdb] Sense Key : Hardware Error [current]
[  845.462295] sd 2:0:0:0: [sdb] ASC=0x44 <<vendor>>ASCQ=0x81
[  845.462654] sd 2:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  845.462658] sd 2:0:0:0: [sdb] Sense Key : Hardware Error [current]
[  845.462663] sd 2:0:0:0: [sdb] ASC=0x44 <<vendor>>ASCQ=0x81
[  845.463406] sd 2:0:0:0: [sdb] 0 512-byte logical blocks: (0 B/0 B)
[  845.463409] sd 2:0:0:0: [sdb] 0-byte physical blocks
[  845.463779] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
[  845.463904] sd 2:0:0:0: [sdb] Asking for cache data failed
[  845.463911] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[  845.468504] sd 2:0:0:0: [sdb] Unit Not Ready
[  845.468511] sd 2:0:0:0: [sdb] Sense Key : Hardware Error [current]
[  845.468518] sd 2:0:0:0: [sdb] ASC=0x44 <<vendor>>ASCQ=0x81
[  845.469917] sd 2:0:0:0: [sdb] Read Capacity(16) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  845.469923] sd 2:0:0:0: [sdb] Sense Key : Hardware Error [current]
[  845.469931] sd 2:0:0:0: [sdb] ASC=0x44 <<vendor>>ASCQ=0x81
[  845.470411] sd 2:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  845.470414] sd 2:0:0:0: [sdb] Sense Key : Hardware Error [current]
[  845.470420] sd 2:0:0:0: [sdb] ASC=0x44 <<vendor>>ASCQ=0x81
[  845.471912] sd 2:0:0:0: [sdb] Attached SCSI disk
[  879.755807] sd 2:0:0:0: [sdb] Unit Not Ready
[  879.755814] sd 2:0:0:0: [sdb] Sense Key : Hardware Error [current]
[  879.755821] sd 2:0:0:0: [sdb] ASC=0x44 <<vendor>>ASCQ=0x81
[  879.756963] sd 2:0:0:0: [sdb] Read Capacity(16) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  879.756968] sd 2:0:0:0: [sdb] Sense Key : Hardware Error [current]
[  879.756975] sd 2:0:0:0: [sdb] ASC=0x44 <<vendor>>ASCQ=0x81
[  879.757431] sd 2:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  879.757436] sd 2:0:0:0: [sdb] Sense Key : Hardware Error [current]
[  879.757442] sd 2:0:0:0: [sdb] ASC=0x44 <<vendor>>ASCQ=0x81
[  945.911588] sd 2:0:0:0: [sdb] Unit Not Ready
[  945.911595] sd 2:0:0:0: [sdb] Sense Key : Hardware Error [current]
[  945.911601] sd 2:0:0:0: [sdb] ASC=0x44 <<vendor>>ASCQ=0x81
[  945.912348] sd 2:0:0:0: [sdb] Read Capacity(16) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  945.912353] sd 2:0:0:0: [sdb] Sense Key : Hardware Error [current]
[  945.912360] sd 2:0:0:0: [sdb] ASC=0x44 <<vendor>>ASCQ=0x81
[  945.912839] sd 2:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  945.912843] sd 2:0:0:0: [sdb] Sense Key : Hardware Error [current]
[  945.912849] sd 2:0:0:0: [sdb] ASC=0x44 <<vendor>>ASCQ=0x81
[  961.299597] sd 2:0:0:0: [sdb] Unit Not Ready
[  961.299603] sd 2:0:0:0: [sdb] Sense Key : Hardware Error [current]
[  961.299609] sd 2:0:0:0: [sdb] ASC=0x44 <<vendor>>ASCQ=0x81
[  961.299975] sd 2:0:0:0: [sdb] Read Capacity(16) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  961.299979] sd 2:0:0:0: [sdb] Sense Key : Hardware Error [current]
[  961.299985] sd 2:0:0:0: [sdb] ASC=0x44 <<vendor>>ASCQ=0x81
[  961.303118] sd 2:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  961.303124] sd 2:0:0:0: [sdb] Sense Key : Hardware Error [current]
[  961.303131] sd 2:0:0:0: [sdb] ASC=0x44 <<vendor>>ASCQ=0x81
[ 1051.151922] sd 2:0:0:0: [sdb] Unit Not Ready
[ 1051.151928] sd 2:0:0:0: [sdb] Sense Key : Hardware Error [current]
[ 1051.151935] sd 2:0:0:0: [sdb] ASC=0x44 <<vendor>>ASCQ=0x81
[ 1051.152403] sd 2:0:0:0: [sdb] Read Capacity(16) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1051.152408] sd 2:0:0:0: [sdb] Sense Key : Hardware Error [current]
[ 1051.152414] sd 2:0:0:0: [sdb] ASC=0x44 <<vendor>>ASCQ=0x81
[ 1051.152774] sd 2:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1051.152779] sd 2:0:0:0: [sdb] Sense Key : Hardware Error [current]
[ 1051.152784] sd 2:0:0:0: [sdb] ASC=0x44 <<vendor>>ASCQ=0x81


juwa2

  • Závislák
  • ****
  • Příspěvků: 1590
  • Karma: +115/-34
    • Zobrazit profil
Re:Externí disk WD Scorpio
« Odpověď #1 kdy: 03 Únor 2018, 14:10:01 »
Raději se podívej do obyčejného s.m.a.r.t.u jak na tom disk je....

canonpixma

  • Návštěvník
  • *
  • Příspěvků: 6
  • Karma: +0/-0
    • Zobrazit profil
Re:Externí disk WD Scorpio
« Odpověď #2 kdy: 03 Únor 2018, 14:39:37 »
Snímek obrazovky pořízený 2018-02-03 14-37-36

TIBOR

  • Guru
  • *****
  • Příspěvků: 5883
  • Karma: +435/-21
  • Som uzivatel linuxovej distribucie, som linuxak?
    • Zobrazit profil
Re:Externí disk WD Scorpio
« Odpověď #3 kdy: 03 Únor 2018, 14:53:00 »
iny hdd v tej krabicke ide? Treba zistit ci zlyhala krabicka alebo disk.
Asus X751LB-TY014H Ubuntu 16.04 XX 64bit - Mate.
Linus, Lajnas, Línus, Luínus, Lajnus a je mi naozaj jedno, ako ľudia vyslovujú moje meno. Ale "Linux" je vždy "Linux". LINUS TORVALDS, tvorca Linuxového jadra.(V dokumente Revolution OS)

juwa2

  • Závislák
  • ****
  • Příspěvků: 1590
  • Karma: +115/-34
    • Zobrazit profil
Re:Externí disk WD Scorpio
« Odpověď #4 kdy: 03 Únor 2018, 16:34:11 »
Snímek obrazovky pořízený 2018-02-03 14-37-36
smart vypadá takto (disky > ctrl+S)

canonpixma

  • Návštěvník
  • *
  • Příspěvků: 6
  • Karma: +0/-0
    • Zobrazit profil
Re:Externí disk WD Scorpio
« Odpověď #5 kdy: 03 Únor 2018, 16:50:21 »
Jde mi to jen, když jsem na tom disku co funguje, tenhle smart chcete?

juwa2

  • Závislák
  • ****
  • Příspěvků: 1590
  • Karma: +115/-34
    • Zobrazit profil
Re:Externí disk WD Scorpio
« Odpověď #6 kdy: 03 Únor 2018, 16:56:54 »
Jde mi to jen, když jsem na tom disku co funguje, tenhle smart chcete?
Jedná se samozřejmě o smart disku o který od začátku dotazu jde, smarty jiných disků nikoho nezajímají - to je snad jasné..

canonpixma

  • Návštěvník
  • *
  • Příspěvků: 6
  • Karma: +0/-0
    • Zobrazit profil
Re:Externí disk WD Scorpio
« Odpověď #7 kdy: 03 Únor 2018, 17:04:55 »
Smart mi na tom disku co nejde nejde zobrazit, ukáže se jen na tom disku co jde.

juwa2

  • Závislák
  • ****
  • Příspěvků: 1590
  • Karma: +115/-34
    • Zobrazit profil
Re:Externí disk WD Scorpio
« Odpověď #8 kdy: 03 Únor 2018, 17:51:37 »
Smart mi na tom disku co nejde nejde zobrazit, ukáže se jen na tom disku co jde.
A točí se vůbec ten disk?

canonpixma

  • Návštěvník
  • *
  • Příspěvků: 6
  • Karma: +0/-0
    • Zobrazit profil
Re:Externí disk WD Scorpio
« Odpověď #9 kdy: 03 Únor 2018, 17:59:51 »
Ne netočí. Je úplně potichoučku. Ale svítí modrá diodka na krabičce.

juwa2

  • Závislák
  • ****
  • Příspěvků: 1590
  • Karma: +115/-34
    • Zobrazit profil
Re:Externí disk WD Scorpio
« Odpověď #10 kdy: 03 Únor 2018, 18:37:59 »
Ne netočí. Je úplně potichoučku. Ale svítí modrá diodka na krabičce.
No v tom případě se nediv, že se smartu nedočkáš...
Disk je zkrátka po smrti.