Prosíme přihlašte se nebo zaregistrujte.

Přihlašte se svým uživatelským jménem a heslem.
Vaše pomoc je stále potřeba!

Autor Téma: GRUB [vyřešeno]  (Přečteno 2547 krát)

DyL

  • Návštěvník
  • Příspěvků: 29
GRUB [vyřešeno]
« kdy: 12 Ledna 2008, 22:34:51 »
Viem ze to tu uz bolo x-krat, ale nejak sa neviem pohnut.
Mam 2x HDD. Na obidvoch HDD som mal Ubuntu. Na prvom 64bitove a na druhom 32 bitove.
Na disk kde bolo 32bit Ubuntu som nainstaloval win XP.

Nasledne som obnovil grub cez supergrubdisk, mam ale problem s tym ze nemam v ponuke GRUBu Windows, ale este stale obidve distribucie Ubuntu.

Ako to viem opravit?

Prikladam vypis fdisk:

Disk /dev/sda: 80,0 GB, 80 026 361 856 bajtů
hlav: 255, sektorů na stopu: 63, cylindrů: 9 729
Jednotky = cylindry po 16065 * 512 = 8 225 280 bajtech
Identifikátor disku: 0x7ece75f2

Zařízení Zavádět   Začátek       Konec    Bloky    Id  Systém
/dev/sda1   *           1        9728    78140128+   7  HPFS/NTFS

Disk /dev/sdb: 160,0 GB, 160 041 885 696 bajtů
hlav: 255, sektorů na stopu: 63, cylindrů: 19 457
Jednotky = cylindry po 16065 * 512 = 8 225 280 bajtech
Identifikátor disku: 0xcc70cc70

Zařízení Zavádět   Začátek       Konec    Bloky    Id  Systém
/dev/sdb1   *           1       18662   149902483+  83  Linux
/dev/sdb2           18663       19457     6385837+   5  Rozšířený
/dev/sdb5           18663       19457     6385806   82  Linux swap/Solaris
« Poslední změna: 14 Ledna 2008, 01:44:46 od Anna Taliánová »

truhlik

  • Závislák
  • ***
  • Příspěvků: 1626
Re: GRUB
« Odpověď #1 kdy: 12 Ledna 2008, 23:02:21 »
jeste vypis /boot/grub/menu.lst
« Poslední změna: 12 Ledna 2008, 23:32:30 od Anna Taliánová »
http://wiki.ubuntu.cz/P%C5%99ipojen%C3%AD%20disku
http://www.linuxsoft.cz/article.php?id_article=1351
http://www.root.cz/clanky/klonovani-obrazu-a-dva-monitory-v-linuxu
Citace: Otakar
Červi jsou moc milá zvířátka, zvláště když má jejich chovatel výhrady proti chování tučňáků

DyL

  • Návštěvník
  • Příspěvků: 29
Re: GRUB
« Odpověď #2 kdy: 13 Ledna 2008, 10:29:02 »
# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default      0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout      10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title      Windows 95/98/NT/2000
# root      (hd0,0)
# makeactive
# chainloader   +1
#
# title      Linux
# root      (hd0,1)
# kernel   /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=ee850623-4a95-4490-9d00-0cee253c5d29 ro

## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd1,0)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title      Ubuntu 7.10, kernel 2.6.22-14-generic
root      (hd1,0)
kernel      /boot/vmlinuz-2.6.22-14-generic root=UUID=ee850623-4a95-4490-9d00-0cee253c5d29 ro quiet splash
initrd      /boot/initrd.img-2.6.22-14-generic
quiet

title      Ubuntu 7.10, kernel 2.6.22-14-generic (recovery mode)
root      (hd1,0)
kernel      /boot/vmlinuz-2.6.22-14-generic root=UUID=ee850623-4a95-4490-9d00-0cee253c5d29 ro single
initrd      /boot/initrd.img-2.6.22-14-generic

title      Ubuntu 7.10, memtest86+
root      (hd1,0)
kernel      /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title      Other operating systems:
root


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda1.
title      Ubuntu 7.10, kernel 2.6.22-14-generic (on /dev/sda1)
root      (hd0,0)
kernel      /boot/vmlinuz-2.6.22-14-generic root=UUID=00b33138-7bdd-4771-b770-14b789b43285 ro quiet splash
initrd      /boot/initrd.img-2.6.22-14-generic
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda1.
title      Ubuntu 7.10, kernel 2.6.22-14-generic (recovery mode) (on /dev/sda1)
root      (hd0,0)
kernel      /boot/vmlinuz-2.6.22-14-generic root=UUID=00b33138-7bdd-4771-b770-14b789b43285 ro single
initrd      /boot/initrd.img-2.6.22-14-generic
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda1.
title      Ubuntu 7.10, memtest86+ (on /dev/sda1)
root      (hd0,0)
kernel      /boot/memtest86+.bin 
savedefault
boot
« Poslední změna: 14 Ledna 2008, 01:45:39 od Anna Taliánová »

luisah

  • Závislák
  • ***
  • Příspěvků: 3704
Re: GRUB
« Odpověď #3 kdy: 13 Ledna 2008, 11:06:54 »
Tady to je dobře vysvětlený:
http://forum.ubuntu.cz/index.php?topic=3194

V odkaze uvádí Lukáš Svoboda toto, a funguje, vlastní zkušenost:
Kód: [Vybrat]
title=Windows
rootnoverify (hd1,0)
map (hd1) (hd0)
map (hd0) (hd1)
chainloader +1

a tady stránka z wiki: http://wiki.ubuntu.cz/GRUB/P%C5%99id%C3%A1n%C3%AD_Windows?highlight=%28grub%29
« Poslední změna: 14 Ledna 2008, 01:46:19 od Anna Taliánová »

DyL

  • Návštěvník
  • Příspěvků: 29
Re: GRUB
« Odpověď #4 kdy: 13 Ledna 2008, 16:07:13 »
Dik

nakoniec som tam dopisal toto:

title=Windows
rootnoverify (hd0,0)
makeactive
chainloader +1
« Poslední změna: 14 Ledna 2008, 01:46:48 od Anna Taliánová »

 

Provoz zaštiťuje spolek OpenAlt.