Prosíme přihlašte se nebo zaregistrujte.

Přihlašte se svým uživatelským jménem a heslem.
Vaše pomoc je stále potřeba!

Autor Téma: Beryl a zvuk  (Přečteno 1020 krát)

tleskac

  • Návštěvník
  • Příspěvků: 11
Beryl a zvuk
« kdy: 13 Ledna 2007, 21:53:41 »
Nainstaloval jsem si Beryl (bez problémů) nicméně jsem zjistil že mi přestal fungovat zvuk. Následně jsem ho odinstaloval a xorg.conf jsem vrátil do původního stavu. Bohužel zvuk mi nejde pořád :-( Co s tím?

Díky

Vojtěch Trefný

  • Příspěvků: 9307
  • Don Quijote
Beryl a zvuk
« Odpověď #1 kdy: 13 Ledna 2007, 21:57:21 »
xorg.conf jsem vrátil do původního stavu - znemená to obnovil ze zálohy nebo ručně přepsal, pokud to znamená přepsání, tak doporučuji obnovu ze zálohy (jistě jste ji před takovým zásahem do graf. prostředí udělal).

Napsat druh zvukovky by možná pomohlo, poslat výpis xorg.conf by taky nebylo k zahození.

tleskac

  • Návštěvník
  • Příspěvků: 11
Beryl a zvuk
« Odpověď #2 kdy: 13 Ledna 2007, 22:10:39 »
Ach ne, neudělal, ale myslím že jsem to reverznul dobře. Zvukovka je M-Audio Revolution 5.1 a xorg.conf je
zde :



# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder3)  Mon Oct 16 22:13:07 PDT 2006

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
    Identifier     "Default Layout"
    Screen         "Default Screen" 0 0
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
    InputDevice    "stylus" "SendCoreEvents"
    InputDevice    "cursor" "SendCoreEvents"
    InputDevice    "eraser" "SendCoreEvents"
EndSection

Section "Files"

   # path to defoma fonts
    FontPath        "/usr/share/X11/fonts/misc"
    FontPath        "/usr/share/X11/fonts/cyrillic"
    FontPath        "/usr/share/X11/fonts/100dpi/:unscaled"
    FontPath        "/usr/share/X11/fonts/75dpi/:unscaled"
    FontPath        "/usr/share/X11/fonts/Type1"
    FontPath        "/usr/share/X11/fonts/100dpi"
    FontPath        "/usr/share/X11/fonts/75dpi"
    FontPath        "/usr/share/fonts/X11/misc"
    FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
    Load           "i2c"
    Load           "bitmap"
    Load           "ddc"
    Load           "extmod"
    Load           "freetype"
    Load           "glx"
    Load           "int10"
    Load           "type1"
    Load           "vbe"
#    Load           "dri"
#    Load           "dbe"
EndSection

Section "InputDevice"
    Identifier     "Generic Keyboard"
    Driver         "kbd"
    Option         "CoreKeyboard"
    Option         "XkbRules" "xorg"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "cz"
    Option         "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
    Identifier     "Configured Mouse"
    Driver         "mouse"
    Option         "CorePointer"
    Option         "Device" "/dev/input/mice"
    Option         "Protocol" "ExplorerPS/2"
    Option         "ZAxisMapping" "4 5"
    Option         "Emulate3Buttons" "true"
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier     "stylus"
    Driver         "wacom"
    Option         "Device" "/dev/wacom"          # Change to
    Option         "Type" "stylus"
    Option         "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier     "eraser"
    Driver         "wacom"
    Option         "Device" "/dev/wacom"          # Change to
    Option         "Type" "eraser"
    Option         "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier     "cursor"
    Driver         "wacom"
    Option         "Device" "/dev/wacom"          # Change to
    Option         "Type" "cursor"
    Option         "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "Monitor"
    Identifier     "Generic Monitor"
    HorizSync       28.0 - 51.0
    VertRefresh     43.0 - 60.0
    Option         "DPMS"
    Modeline "1280x1024_75.00"  138.54  1280 1368 1504 1728  1024 1025 1028 1069  -HSync +Vsync
    Modeline "1280x1024_60.00"  108.88  1280 1360 1496 1712  1024 1025 1028 1060  -HSync +Vsync
EndSection

Section "Device"
    Identifier     "NVIDIA Corporation NV43 [GeForce 6600]"
    Driver         "nvidia"
#    Option         "XAANoOffscreenPixmaps"
EndSection

Section "Screen"
    Identifier     "Default Screen"
    Device         "NVIDIA Corporation NV43 [GeForce 6600]"
    Monitor        "Generic Monitor"
    DefaultDepth    24
    SubSection     "Display"
        Depth       1
        Modes      "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       4
        Modes      "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       8
        Modes      "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       15
        Modes      "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       16
        Modes      "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       24
        Modes      "1280x1024_75.00" "1280x1024_60.00" "1024x768" "800x600" "640x480"
    EndSubSection
EndSection


#Section "DRI"
#        Mode 0666
#EndSection
       
#Section "Extensions"
#        Option "Composite" "Enable"
#EndSection

 

Provoz zaštiťuje spolek OpenAlt.