Prosíme přihlašte se nebo zaregistrujte.

Přihlašte se svým uživatelským jménem a heslem.
Vaše pomoc je stále potřeba!

Autor Téma: kopírování velkých souborů (DVD)  (Přečteno 8949 krát)

george3200

  • Návštěvník
  • Příspěvků: 9
kopírování velkých souborů (DVD)
« kdy: 12 Prosince 2007, 17:01:51 »
Nemůžu zkopírovat žádné DVD, Pokud vytvořím ISO soubor, přes K3b nebo K9copy, ISO se vytvoří, ale pokud tento soubor chci zkopírovat do jiného adresáře, příp. vypálit přes k3b, tak přibližně při 70%  PC na cca. 5 s zamrzne a pak vypíše chybu, že soubor nemůže přečíst. Je špatný HDD, nebo v čem může být problém. Mám zapnutý SMART
 START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.8 family
Device Model:     ST3200826AS
Serial Number:    3ND20KH4
Firmware Version: 3.04
User Capacity:    200 049 647 616 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   7
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Wed Dec 12 16:59:50 2007 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                 ( 430) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        (  67) minutes.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   054   044   006    Pre-fail  Always       -       116754362
  3 Spin_Up_Time            0x0003   098   098   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       988
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       8
  7 Seek_Error_Rate         0x000f   076   060   030    Pre-fail  Always       -       46164240
  9 Power_On_Hours          0x0032   099   099   000    Old_age   Always       -       1074
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       990
194 Temperature_Celsius     0x0022   037   042   000    Old_age   Always       -       37 (Lifetime Min/Max 0/16)
195 Hardware_ECC_Recovered  0x001a   054   044   000    Old_age   Always       -       116754362
197 Current_Pending_Sector  0x0012   089   089   000    Old_age   Always       -       216
198 Offline_Uncorrectable   0x0010   089   089   000    Old_age   Offline      -       216
199 UDMA_CRC_Error_Count    0x003e   200   199   000    Old_age   Always       -       1
200 Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   Offline      -       0
202 TA_Increase_Count       0x0032   100   253   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 13883 (device log contains only the most recent five errors)
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 13883 occurred at disk power-on lifetime: 1074 hours (44 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 05 b4 d3 af e0  Error: UNC 5 sectors at LBA = 0x00afd3b4 = 11522996

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 af d3 af e0 00      01:16:22.673  READ DMA EXT
  27 00 00 00 00 00 e0 00      01:16:22.671  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00      01:16:19.112  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      01:16:19.112  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      01:16:19.109  READ NATIVE MAX ADDRESS EXT

Error 13882 occurred at disk power-on lifetime: 1074 hours (44 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 05 b4 d3 af e0  Error: UNC 5 sectors at LBA = 0x00afd3b4 = 11522996

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 af d3 af e0 00      01:16:22.673  READ DMA EXT
  27 00 00 00 00 00 e0 00      01:16:22.671  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00      01:16:19.112  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      01:16:19.112  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      01:16:19.109  READ NATIVE MAX ADDRESS EXT

Error 13881 occurred at disk power-on lifetime: 1074 hours (44 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 05 b4 d3 af e0  Error: UNC 5 sectors at LBA = 0x00afd3b4 = 11522996

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 af d3 af e0 00      01:16:11.984  READ DMA EXT
  27 00 00 00 00 00 e0 00      01:16:11.981  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00      01:16:19.112  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      01:16:19.112  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      01:16:19.109  READ NATIVE MAX ADDRESS EXT

Error 13880 occurred at disk power-on lifetime: 1074 hours (44 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 05 b4 d3 af e0  Error: UNC 5 sectors at LBA = 0x00afd3b4 = 11522996

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 af d3 af e0 00      01:16:11.984  READ DMA EXT
  27 00 00 00 00 00 e0 00      01:16:11.981  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00      01:16:11.981  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      01:16:11.981  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      01:16:11.977  READ NATIVE MAX ADDRESS EXT

Error 13879 occurred at disk power-on lifetime: 1074 hours (44 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 05 b4 d3 af e0  Error: UNC 5 sectors at LBA = 0x00afd3b4 = 11522996

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 af d3 af e0 00      01:16:11.984  READ DMA EXT
  27 00 00 00 00 00 e0 00      01:16:11.981  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00      01:16:11.981  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      01:16:11.981  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      01:16:11.977  READ NATIVE MAX ADDRESS EXT

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Vyznáte se v tom někdo?

menganito

  • Závislák
  • ***
  • Příspěvků: 1728
Re: kopírování velkých souborů (DVD)
« Odpověď #1 kdy: 12 Prosince 2007, 18:43:40 »
Sú tam chyby, ale väčšinou vyzerajú byť spojené s dlhým uptimom ktorý už SMART nevie zaznamenávať (ak sa mýlim opravte ma niekto), napadá ma či jeden z tých diskov nie je súborový systém FAT a či máš dosť voľného priestoru na disku...

george3200

  • Návštěvník
  • Příspěvků: 9
Re: kopírování velkých souborů (DVD)
« Odpověď #2 kdy: 12 Prosince 2007, 19:20:31 »
V počítači mám jen jeden disk

Disk /dev/sda: 200,0 GB, 200 049 647 616 bajtů
hlav: 255, sektorů na stopu: 63, cylindrů: 24 321
Jednotky = cylindry po 16065 * 512 = 8 225 280 bajtech
Identifikátor disku: 0x000e91f2

Zařízení Zavádět   Začátek       Konec    Bloky    Id  Systém
/dev/sda1   *           1       24133   193848291   83  Linux
/dev/sda2           24134       24321     1510110    5  Rozšířený
/dev/sda5           24134       24321     1510078+  82  Linux swap/Solaris

george3200

  • Návštěvník
  • Příspěvků: 9
Re: kopírování velkých souborů (DVD)
« Odpověď #3 kdy: 12 Prosince 2007, 19:22:13 »
volného místa na disku mám cca. 150 GB

menganito

  • Závislák
  • ***
  • Příspěvků: 1728
Re: kopírování velkých souborů (DVD)
« Odpověď #4 kdy: 12 Prosince 2007, 21:52:18 »
Tak potom by som sa zameral na tie smart chyby, neviem presne čo znamenajú, skús sa poňúrať tuto, niektorý z outputov sa možno bude podobať tomu tvojmu (ak na nič neprídeš, zajtra poobede sa na to pozriem, teraz neni moc času :(

george3200

  • Návštěvník
  • Příspěvků: 9
Re: kopírování velkých souborů (DVD)
« Odpověď #5 kdy: 15 Prosince 2007, 19:20:06 »
Ten výpis SMART mi nic neříká, takže něvím co mám porovnávat. Pokud budeš mít chvílku času, prosím koukni na to sám.

menganito

  • Závislák
  • ***
  • Příspěvků: 1728
Re: kopírování velkých souborů (DVD)
« Odpověď #6 kdy: 15 Prosince 2007, 21:00:33 »
Zabudol som na to, prepáč.
Konkrétne takú istú chybu som nenašiel ale všeobecne by som povedal že ten disk má nejaký problém: stačí sa pozrieť na riadok
Kód: [Vybrat]
ATA Error Count: 13883 (device log contains only the most recent five errors), mne tam miest toho píše
Kód: [Vybrat]
no errors loggedAle fakt som nezistil čo to znamená. Ak však máš s diskom aj iné problémy, odporúčam vymeniť...

george3200

  • Návštěvník
  • Příspěvků: 9
Re: kopírování velkých souborů (DVD)
« Odpověď #7 kdy: 16 Prosince 2007, 08:48:30 »
Díky za pomoc, jiné problémy s diskem nemám. S výměnou bude asi problém, je cca. 2 měsíce po záruce. Ale i tak díky.

menganito

  • Závislák
  • ***
  • Příspěvků: 1728
Re: kopírování velkých souborů (DVD)
« Odpověď #8 kdy: 16 Prosince 2007, 12:30:28 »
Za málo. Čo sa týka tej výmeny, možno to nie je až také akútne, pri hľadaní som natrafil na výpisy, v ktorých bolo viac errorov a boli označená ako zdravé, možno nejaký nepodstatný error vyskakuje...
Keby sa začal chovať divne určite ho (prinajmenšom) zálohuj :)

 

Provoz zaštiťuje spolek OpenAlt.