Prosíme přihlašte se nebo zaregistrujte.

Přihlašte se svým uživatelským jménem a heslem.
Vaše pomoc je stále potřeba!

Autor Téma: HW restart WiFi adaptéru z OS  (Přečteno 5627 krát)

Václav Sobota

  • Aktivní člen
  • *
  • Příspěvků: 222
HW restart WiFi adaptéru z OS
« kdy: 16 Prosince 2017, 16:25:17 »
Zdravim po dlouhe dobe vsechny ubuntaky! Mam takovy problem, kteremu moc nerozumim: na mem low-endovem laptopu HP 240 G3 s Ubuntu MATE 16.04 mi obcas (spis docela casto) zkolabuje WiFi adapter (delo/deje se to i ve Fedore a ve Win10). Z niceho nic se sit odpoji a pocitac uz pak zadnou nevidi. Co vzdycky pomuze je uplne vypnout a zase zapnout pocitac. Diagnostika je celkem nekomfortni, protoze jak to padne, clovek samozrejme nema pristu na web (nemuzu najit sitovej kabel, abych se pripojil pres nej).

Takze bych rad pozadal o pomoc s nasledujicim: ¿Jak "resatartovat" (vypnout / zapnout) WLAN adapter bez vypinani celeho pocitace?

Pridavam lshw:
Kód: [Vybrat]
WARNING: you should run this program as super-user.
hp                       
    description: Computer
    width: 64 bits
    capabilities: vsyscall32
  *-core
       description: Motherboard
       physical id: 0
     *-memory
          description: System memory
          physical id: 0
          size: 3836MiB
     *-cpu
          product: Intel(R) Celeron(R) CPU  N2840  @ 2.16GHz
          vendor: Intel Corp.
          physical id: 1
          bus info: cpu@0
          size: 781MHz
          capacity: 2582MHz
          width: 64 bits
          capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp x86-64 constant_tsc arch_perfmon pebs bts rep_good nopl xtopology tsc_reliable nonstop_tsc aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer rdrand lahf_lm 3dnowprefetch epb tpr_shadow vnmi flexpriority ept vpid tsc_adjust smep erms dtherm ida arat cpufreq
     *-pci
          description: Host bridge
          product: Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register
          vendor: Intel Corporation
          physical id: 100
          bus info: pci@0000:00:00.0
          version: 0e
          width: 32 bits
          clock: 33MHz
          configuration: driver=iosf_mbi_pci
          resources: irq:0
        *-display
             description: VGA compatible controller
             product: Atom Processor Z36xxx/Z37xxx Series Graphics & Display
             vendor: Intel Corporation
             physical id: 2
             bus info: pci@0000:00:02.0
             version: 0e
             width: 32 bits
             clock: 33MHz
             capabilities: vga_controller bus_master cap_list rom
             configuration: driver=i915 latency=0
             resources: irq:91 memory:90000000-903fffff memory:80000000-8fffffff ioport:2050(size=8) memory:c0000-dffff
        *-generic
             description: Encryption controller
             product: Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine
             vendor: Intel Corporation
             physical id: 1a
             bus info: pci@0000:00:1a.0
             version: 0e
             width: 32 bits
             clock: 33MHz
             capabilities: bus_master cap_list
             configuration: driver=mei_txe latency=0
             resources: irq:92 memory:90900000-909fffff memory:90800000-908fffff
        *-multimedia
             description: Audio device
             product: Atom Processor Z36xxx/Z37xxx Series High Definition Audio Controller
             vendor: Intel Corporation
             physical id: 1b
             bus info: pci@0000:00:1b.0
             version: 0e
             width: 64 bits
             clock: 33MHz
             capabilities: bus_master cap_list
             configuration: driver=snd_hda_intel latency=0
             resources: irq:93 memory:90a10000-90a13fff
        *-pci:0
             description: PCI bridge
             product: Atom Processor E3800 Series PCI Express Root Port 1
             vendor: Intel Corporation
             physical id: 1c
             bus info: pci@0000:00:1c.0
             version: 0e
             width: 32 bits
             clock: 33MHz
             capabilities: pci normal_decode cap_list
             configuration: driver=pcieport
             resources: irq:16 ioport:3000(size=4096)
        *-pci:1
             description: PCI bridge
             product: Atom Processor E3800 Series PCI Express Root Port 2
             vendor: Intel Corporation
             physical id: 1c.1
             bus info: pci@0000:00:1c.1
             version: 0e
             width: 32 bits
             clock: 33MHz
             capabilities: pci normal_decode bus_master cap_list
             configuration: driver=pcieport
             resources: irq:17 ioport:4000(size=4096) memory:90700000-907fffff
           *-network
                description: Wireless interface
                product: RT3290 Wireless 802.11n 1T/1R PCIe
                vendor: Ralink corp.
                physical id: 0
                bus info: pci@0000:02:00.0
                logical name: wlp2s0f0
                version: 00
                serial: 10:08:b1:46:f0:4d
                width: 32 bits
                clock: 33MHz
                capabilities: bus_master cap_list ethernet physical wireless
                configuration: broadcast=yes driver=rt2800pci driverversion=4.10.0-42-generic firmware=0.37 ip=192.168.1.39 latency=0 link=yes multicast=yes wireless=IEEE 802.11
                resources: irq:17 memory:90710000-9071ffff
           *-generic UNCLAIMED
                description: Bluetooth
                product: RT3290 Bluetooth
                vendor: Ralink corp.
                physical id: 0.1
                bus info: pci@0000:02:00.1
                version: 00
                width: 32 bits
                clock: 33MHz
                capabilities: cap_list
                configuration: latency=0
                resources: memory:90700000-9070ffff
        *-pci:2
             description: PCI bridge
             product: Atom Processor E3800 Series PCI Express Root Port 3
             vendor: Intel Corporation
             physical id: 1c.2
             bus info: pci@0000:00:1c.2
             version: 0e
             width: 32 bits
             clock: 33MHz
             capabilities: pci normal_decode bus_master cap_list
             configuration: driver=pcieport
             resources: irq:18 ioport:5000(size=4096) memory:90600000-906fffff
           *-generic
                description: Unassigned class
                product: RTS5229 PCI Express Card Reader
                vendor: Realtek Semiconductor Co., Ltd.
                physical id: 0
                bus info: pci@0000:03:00.0
                version: 01
                width: 32 bits
                clock: 33MHz
                capabilities: bus_master cap_list
                configuration: driver=rtsx_pci latency=0
                resources: irq:89 memory:90600000-90600fff
        *-pci:3
             description: PCI bridge
             product: Atom Processor E3800 Series PCI Express Root Port 4
             vendor: Intel Corporation
             physical id: 1c.3
             bus info: pci@0000:00:1c.3
             version: 0e
             width: 32 bits
             clock: 33MHz
             capabilities: pci normal_decode bus_master cap_list
             configuration: driver=pcieport
             resources: irq:19 ioport:1000(size=4096) memory:90500000-905fffff ioport:90400000(size=1048576)
           *-network
                description: Ethernet interface
                product: RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller
                vendor: Realtek Semiconductor Co., Ltd.
                physical id: 0
                bus info: pci@0000:04:00.0
                logical name: enp4s0
                version: 07
                serial: 5c:b9:01:06:58:55
                size: 10Mbit/s
                capacity: 100Mbit/s
                width: 64 bits
                clock: 33MHz
                capabilities: bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
                configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl8106e-1_0.0.1 06/29/12 latency=0 link=no multicast=yes port=MII speed=10Mbit/s
                resources: irq:90 ioport:1000(size=256) memory:90500000-90500fff memory:90400000-90403fff
        *-isa
             description: ISA bridge
             product: Atom Processor Z36xxx/Z37xxx Series Power Control Unit
             vendor: Intel Corporation
             physical id: 1f
             bus info: pci@0000:00:1f.0
             version: 0e
             width: 32 bits
             clock: 33MHz
             capabilities: isa bus_master cap_list
             configuration: driver=lpc_ich latency=0
             resources: irq:0
        *-serial UNCLAIMED
             description: SMBus
             product: Atom Processor E3800 Series SMBus Controller
             vendor: Intel Corporation
             physical id: 1f.3
             bus info: pci@0000:00:1f.3
             version: 0e
             width: 32 bits
             clock: 33MHz
             capabilities: cap_list
             configuration: latency=0
             resources: memory:90a18000-90a1801f ioport:2000(size=32)
        *-storage
             description: SATA controller
             product: Atom Processor E3800 Series SATA AHCI Controller
             vendor: Intel Corporation
             physical id: 13
             bus info: pci@0000:00:13.0
             version: 0e
             width: 32 bits
             clock: 66MHz
             capabilities: storage ahci_1.0 bus_master cap_list
             configuration: driver=ahci latency=0
             resources: irq:88 ioport:2048(size=8) ioport:205c(size=4) ioport:2040(size=8) ioport:2058(size=4) ioport:2020(size=32) memory:90a1e000-90a1e7ff
        *-usb
             description: USB controller
             product: Atom Processor Z36xxx/Z37xxx, Celeron N2000 Series USB xHCI
             vendor: Intel Corporation
             physical id: 14
             bus info: pci@0000:00:14.0
             version: 0e
             width: 64 bits
             clock: 33MHz
             capabilities: xhci cap_list
             configuration: driver=xhci_hcd latency=0
             resources: irq:87 memory:90a00000-90a0ffff
     *-scsi
          physical id: 2
          logical name: scsi1
          capabilities: emulated
        *-cdrom
             description: DVD-RAM writer
             product: DVDRW  SU208GB
             vendor: hp
             physical id: 0.0.0
             bus info: scsi@1:0.0.0
             logical name: /dev/cdrom
             logical name: /dev/cdrw
             logical name: /dev/dvd
             logical name: /dev/dvdrw
             logical name: /dev/sr0
             version: HH00
             capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram
             configuration: ansiversion=5 status=nodisc
WARNING: output may be incomplete or inaccurate, you should run this program as super-user.

a lspci:
Kód: [Vybrat]
00:00.0 Host bridge: Intel Corporation Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register (rev 0e)
00:02.0 VGA compatible controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display (rev 0e)
00:13.0 SATA controller: Intel Corporation Atom Processor E3800 Series SATA AHCI Controller (rev 0e)
00:14.0 USB controller: Intel Corporation Atom Processor Z36xxx/Z37xxx, Celeron N2000 Series USB xHCI (rev 0e)
00:1a.0 Encryption controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine (rev 0e)
00:1b.0 Audio device: Intel Corporation Atom Processor Z36xxx/Z37xxx Series High Definition Audio Controller (rev 0e)
00:1c.0 PCI bridge: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 1 (rev 0e)
00:1c.1 PCI bridge: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 2 (rev 0e)
00:1c.2 PCI bridge: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 3 (rev 0e)
00:1c.3 PCI bridge: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 4 (rev 0e)
00:1f.0 ISA bridge: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Power Control Unit (rev 0e)
00:1f.3 SMBus: Intel Corporation Atom Processor E3800 Series SMBus Controller (rev 0e)
02:00.0 Network controller: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe
02:00.1 Bluetooth: Ralink corp. RT3290 Bluetooth
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller (rev 07)

Predem moc dekuji za rady!
« Poslední změna: 16 Prosince 2017, 16:27:10 od Václav Sobota »

juwa2

  • Závislák
  • ***
  • Příspěvků: 4935
Re:HW restart WiFi adaptéru z OS
« Odpověď #1 kdy: 16 Prosince 2017, 16:52:57 »
A nestačilo by akorát restartovat network-manager?
Kód: [Vybrat]
sudo service network-manager restart Vyzkoušej to..
Další postupy máš zde http://www.aupcgroup.com/blog/index.php?/archives/16-Ubuntu-restart-wifi-connection-without-rebooting.html
-------------------------
Pokud je ale karta fyzicky načatá (studeňák), snažíš se marně...
« Poslední změna: 16 Prosince 2017, 19:44:06 od juwa2 »

Václav Sobota

  • Aktivní člen
  • *
  • Příspěvků: 222
Re:HW restart WiFi adaptéru z OS
« Odpověď #2 kdy: 16 Prosince 2017, 23:05:45 »
A nestačilo by akorát restartovat network-manager?
Kód: [Vybrat]
sudo service network-manager restart Vyzkoušej to..

Tak to bohuzel nezabralo, vyzkousim postupy z odkazu. Prikladam screenshot vysledku selhani.


West

  • Aktivní člen
  • *
  • Příspěvků: 404
Re:HW restart WiFi adaptéru z OS
« Odpověď #4 kdy: 17 Prosince 2017, 09:44:53 »
Niektore adpatery potrebuju v takomto pripade workaround v podobe znovuzavedenia driveru.
- odstranit driver (rmmod driver_name)
- zaviest driver (modprobe driver_name)

Da sa to automatizovat v podobe skriptu.

petertomasy

  • Stálý člen
  • **
  • Příspěvků: 856
Re:HW restart WiFi adaptéru z OS
« Odpověď #5 kdy: 17 Prosince 2017, 09:49:26 »
ovládač odoberieš a znovu pridáš takto :
Kód: [Vybrat]
sudo modprobe -rv rt2800pci
sudo modprobe -v rt2800pci

ale skôr by to chcelo výpis dmesg a pod , keď ti wifi skolabuje.

add :  uff už ma predbehol west ;)

Václav Sobota

  • Aktivní člen
  • *
  • Příspěvků: 222
Re:HW restart WiFi adaptéru z OS
« Odpověď #6 kdy: 17 Prosince 2017, 15:20:14 »
West & petertomasy: Ke stejnemu reseni vede i ten link co posilal juwa2. Myslim ze to bude ono (zatim mi to nespadlo, takze jsem nevyzkousel). Usuzuji tak na zaklade tohohle komentu:
Citace
Thank you! This works great. The wireless network on my laptop became unreliable after upgrading to Ubuntu 16.04 LTS. I too experienced no wifi after waking up from sleep. Also the wifi would at random. die for no apparent reason and the only that worked was a full reboot of the laptop.

The only other thing that I have needed to do is press the manual wifi button to connect to my wifi. No inconvenience when compared to at total reboot.

To reseni, stejne jako jste oba navhli, je popsano na http://blog.ostermiller.org/resetting-wireless-networking-on-ubuntu-without-rebooting/

Jakmile budu mit vyzkouseno, dam vedet vysledek.

Václav Sobota

  • Aktivní člen
  • *
  • Příspěvků: 222
Re:HW restart WiFi adaptéru z OS
« Odpověď #7 kdy: 18 Prosince 2017, 14:59:54 »
Tak bohuzel, ani reload ovladace nepomuze  :'(

petertomasy

  • Stálý člen
  • **
  • Příspěvků: 856
Re:HW restart WiFi adaptéru z OS
« Odpověď #8 kdy: 18 Prosince 2017, 15:18:33 »
posli sem vypis wireless-info.txt
Kód: [Vybrat]
wget -N -t 5 -T 10 https://github.com/UbuntuForums/wireless-info/raw/master/wireless-info && \
chmod +x wireless-info && \
./wireless-info
pred odpojením  a znova po odpojení wifiny . Iba tak zistíme v čom je problém ...

Václav Sobota

  • Aktivní člen
  • *
  • Příspěvků: 222
Re:HW restart WiFi adaptéru z OS
« Odpověď #9 kdy: 19 Prosince 2017, 17:16:49 »
Pred chvili jsem zase zazil jeden z padu, takze pripojuji
Citace
dmesg | tail
[100045.603458] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[100045.807388] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[100066.183032] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[100066.383082] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[100088.199177] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[100088.399208] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[100088.599244] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[100088.803419] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[100109.070880] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[100109.270773] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush

posli sem vypis wireless-info.txt
Kód: [Vybrat]
wget -N -t 5 -T 10 https://github.com/UbuntuForums/wireless-info/raw/master/wireless-info && \
chmod +x wireless-info && \
./wireless-info
pred odpojením  a znova po odpojení wifiny . Iba tak zistíme v čom je problém ...

Ok, udelam. Vysledek pri aktivnim pripojeni prilozen.

Václav Sobota

  • Aktivní člen
  • *
  • Příspěvků: 222
Re:HW restart WiFi adaptéru z OS
« Odpověď #10 kdy: 19 Prosince 2017, 20:33:54 »
Zase jsem si uzil se z nenadani odpojenou WiFi, takze muzu prilozit taky vysledek.

West

  • Aktivní člen
  • *
  • Příspěvků: 404
Re:HW restart WiFi adaptéru z OS
« Odpověď #11 kdy: 20 Prosince 2017, 18:54:13 »
Zrejme bude potrebne googlovat podla kriteria:
rt2x00queue_flush_queue: Warning - Queue 0 failed to flush

Vyzera to na bug v ovladaci popisovany tuna:
https://ubuntuforums.org/showthread.php?t=2210322
(je oznaceny ako vyrieseny, popis riesenia je v threade):

petertomasy

  • Stálý člen
  • **
  • Příspěvků: 856
Re:HW restart WiFi adaptéru z OS
« Odpověď #12 kdy: 21 Prosince 2017, 10:26:46 »
skús použiť driver priamo od ralinku, z logu som nič nevyčítal ...  :-X . Možno to bude hardvérový problém .

Václav Sobota

  • Aktivní člen
  • *
  • Příspěvků: 222
Re:HW restart WiFi adaptéru z OS
« Odpověď #13 kdy: 21 Prosince 2017, 16:43:51 »
Zrejme bude potrebne googlovat podla kriteria:
rt2x00queue_flush_queue: Warning - Queue 0 failed to flush

Vyzera to na bug v ovladaci popisovany tuna:
https://ubuntuforums.org/showthread.php?t=2210322
(je oznaceny ako vyrieseny, popis riesenia je v threade):

Je to trosku zmatecne, zatim jsem zkusil:
skús použiť driver priamo od ralinku, z logu som nič nevyčítal ...  :-X . Možno to bude hardvérový problém .

Dam vedet, jak to bude fungovat.
« Poslední změna: 20 Ledna 2018, 19:22:05 od Václav Sobota »

Václav Sobota

  • Aktivní člen
  • *
  • Příspěvků: 222
Re:HW restart WiFi adaptéru z OS
« Odpověď #14 kdy: 28 Prosince 2017, 17:09:58 »
Nainstaloval jsem ovladac Ralinku, vysledkem je lepsi prijem signaulu (alepon co se indikace tyce). Chyba nicmene nezmizela, pouze se neprojevi viditelnym zmizenim site (proste jenom nefunguje pripojeni. Pripojuji vypis wireless-info a screenshot.

West

  • Aktivní člen
  • *
  • Příspěvků: 404
Re:HW restart WiFi adaptéru z OS
« Odpověď #15 kdy: 28 Prosince 2017, 21:23:01 »
No a vtej dobe ked akoze nefunguje pripojenie, ide ping na IP adresu routra normalne?
Alebo nejde len internet a lokalna siet by isla, napriklad ping na iny pocitac.

Václav Sobota

  • Aktivní člen
  • *
  • Příspěvků: 222
Re:HW restart WiFi adaptéru z OS
« Odpověď #16 kdy: 29 Prosince 2017, 00:21:43 »
Ani W/LAN, ani internet nefunguji:
Citace
ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
From 192.168.1.39 icmp_seq=1 Destination Host Unreachable
From 192.168.1.39 icmp_seq=2 Destination Host Unreachable
From 192.168.1.39 icmp_seq=3 Destination Host Unreachable
From 192.168.1.39 icmp_seq=4 Destination Host Unreachable

West

  • Aktivní člen
  • *
  • Příspěvků: 404
Re:HW restart WiFi adaptéru z OS
« Odpověď #17 kdy: 30 Prosince 2017, 11:33:17 »
To by mohlo znamenat, ze ti padne pripojenie do stavu "Link_Down" na strane pocitaca, zrejme vzhladom na okolite rusenie. Je to vcelku normalna vec. Ovladac wifi ma nastavenu urcitu hranici linkovej kvality, ktora ked sa prekroci, tak da povel na odpojenie a skusa sa znova pripojit. Kazda wifi karta tak funguje, len ta hranica kedy sa to odpoji je u kazdeho ovladaca ina. Ralink ovladac ma okrem toho este problem s tym, ze na detekciu tejto hranice pouziva aktualnu hodnotu, namiesto priemerovanej. To znamena, ze mu vadia velke vychylky tejto hodnoty. Da sa to opravit ak vies programovat.
Tento ovladac ma v /etc/Wireless/RT2870STA konfigurak RT2870STA.dat v ktorom je mozne nastavovat rozne hodnoty. Jednou z nich, ktora moze ciastcne vyriesit tento problem je hodnota "BeaconLostTime". Je vhodne ju nastavit aspon na "BeaconLostTime=8".
Potom si pozri ci mas nastaveny router na 20 MHz sirku kanalu a nie na nejake "Auto", alebo 20/40 MHz.
Ak existuje na tvojom routri parameter "Guard Interval", niekedy oznaceny aj ako ShortGI, tak ho treba vypnut v pripade problemov s pripojenim. Je to mozne nastavit aj v tom konfiguraku aspon pre tento pocitac parametrom HT_GI=0.

Václav Sobota

  • Aktivní člen
  • *
  • Příspěvků: 222
Re:HW restart WiFi adaptéru z OS
« Odpověď #18 kdy: 03 Ledna 2018, 22:33:26 »
Do routeru se ted asi nedostanu, nemuzu najit heslo, ale konfigurak jsem upravil,  tak uvidime...

Kód: [Vybrat]
#The word of "Default" must not be removed
Default
CountryRegion=5
CountryRegionABand=7
CountryCode=
ChannelGeography=1
SSID=Dennis2860AP
NetworkType=Infra
WirelessMode=9
Channel=0
BeaconPeriod=100
TxPower=100
BGProtection=0
TxPreamble=0
RTSThreshold=2347
FragThreshold=2346
TxBurst=1
PktAggregate=0
WmmCapable=1
AckPolicy=0;0;0;0
AuthMode=OPEN
EncrypType=NONE
WPAPSK=
DefaultKeyID=1
Key1Type=0
Key1Str=
Key2Type=0
Key2Str=
Key3Type=0
Key3Str=
Key4Type=0
Key4Str=
PSMode=CAM
AutoRoaming=0
RoamThreshold=70
APSDCapable=0
APSDAC=0;0;0;0
HT_RDG=1
HT_EXTCHA=0
HT_OpMode=0
HT_MpduDensity=4
HT_BW=1
HT_AutoBA=1
HT_BADecline=0
HT_AMSDU=0
HT_BAWinSize=64
HT_GI=0
HT_MCS=33
HT_MIMOPSMode=3
HT_DisallowTKIP=1
HT_STBC=0
EthConvertMode=
EthCloneMac=
IEEE80211H=0
TGnWifiTest=0
WirelessEvent=0
MeshId=MESH
MeshAutoLink=1
MeshAuthMode=OPEN
MeshEncrypType=NONE
MeshWPAKEY=
MeshDefaultkey=1
MeshWEPKEY=
CarrierDetect=0
AntDiversity=0
BeaconLostTime=8
FtSupport=0
Wapiifname=ra0
WapiPsk=
WapiPskType=
WapiUserCertPath=
WapiAsCertPath=
PSP_XLINK_MODE=0
WscManufacturer=
WscModelName=
WscDeviceName=
WscModelNumber=
WscSerialNumber=
RadioOn=1
WIDIEnable=1
P2P_L2SD_SCAN_TOGGLE=3
Wsc4digitPinCode=0
P2P_WIDIEnable=0
PMFMFPC=0
PMFMFPR=0
PMFSHA256=0

EDIT: Router zadnou prilis podrobnou konfiguraci nenabizi:
Kód: [Vybrat]
Wireless Access Point - LS1706

Configuration

WLAN Enable: Yes

Interface Enabled: Yes

Power Reduction Enabled: No

Physical Address: c4:ea:1d:19:bd:f5

Network Name (SSID): LS1706

Interface Type: 802.11b/g/n

Actual Speed [Mbps]: 54

Band: 2.4GHz

Channel Selection: Manual

Region: USA

Channel: 11

Allow multicast from Broadband Network: Yes

WMM: Enabled

Security

WPS Enabled: Yes

Broadcast Network Name: Yes

Allow New Devices: New stations are allowed (automatically)

Security Mode: WPA-PSK

WPA-PSK Preshared Key:

WPA-PSK Encryption: TKIP&AES

WPA-PSK Version: WPA&WPA2
« Poslední změna: 03 Ledna 2018, 23:11:39 od Václav Sobota »

West

  • Aktivní člen
  • *
  • Příspěvků: 404
Re:HW restart WiFi adaptéru z OS
« Odpověď #19 kdy: 03 Ledna 2018, 23:16:33 »
Kym najdes heslo do routra, tak v tom konfiguraku si este oprav nastavenie:
HT_BW=0  // Vyziada si od routra pripojenie v sirke kanalu 20 MHz

Vsetky ostatne stanice na sieti komunikuju nezmenenymi parametrami.
Ak nastavis na routri sirku kanalu na 20 MHz, tak vsetky stanice na sieti budu fungovat na 20 MHz.

Len pre informaciu:
HT_MCS=33 znamena nastavenie rychlostnej automatiky (TxRate) na "auto".

Na routri mas nastaveny region = USA, neviem ci to tak mas zamerne.

Václav Sobota

  • Aktivní člen
  • *
  • Příspěvků: 222
Re:HW restart WiFi adaptéru z OS
« Odpověď #20 kdy: 20 Ledna 2018, 19:18:59 »
Dekuji (zejmena) Westovi za pomoc, nicmene snahy byly marne, jde na 99% o HW problem. Nedavno WLAN prestala fungovat uplne (ve Win teda obvykle na chvilku nabehne, ale par max. desitek minut). "Vyresil" jsem ho tak, ze pouzivam smartfoun jako sitovou kartu (pres USB) - je to prekvapive praktictejsi nez dongle a funguje na 100%. Plus jsem si koupil nahradni laptop, ale obratem sel na reklamaci (a hned jak jsem ho prinesl domu me napadlo pouzit ten telefon :D ).

 

Provoz zaštiťuje spolek OpenAlt.