Prosíme přihlašte se nebo zaregistrujte.

Přihlašte se svým uživatelským jménem a heslem.
Blog Ubuntu -- Správa "projektů" české komunity Ubuntu

Novinky: Děkujeme všem návštěvníkům fóra, kteří ochotně radí ostatním. Vaše práce je velmi potřebná a vážíme si jí.

Zobrazit příspěvky

Tato sekce Vám umožňuje zobrazit všechny příspěvky tohoto uživatele. Prosím uvědomte si, že můžete vidět příspěvky pouze z oblastí Vám přístupných.


Témata - Kony.cz

Stran: [1] 2 3
1
Internet a sítě / Virtual COM pres Ethernet
« kdy: 11 Červenec 2018, 15:54:47 »
Chtel sjem se zeptat, lze tohle nejak docilit ??? Mam dva servery, na obou bezi ubuntu.. u jednoho mam zapojenou ctecku do USB a potreboval bych ten seriovy port preposlat na druhy server

2
Internet a sítě / vsFTPD TimeOut a chyba 10060
« kdy: 02 Červen 2018, 18:08:26 »
Ahoj, mam na serveru Ubuntu 16.04 a nainstalovany vsFtpd, kdyz se na to pripojuji pres TotalCMD tak to funguje vse jak ma, ale delam v Delphi jednu aplikaci, ktera ma posilat na server nejaky veci a ta mi porad dokola hlasi chybu 10060 Timed Out, pokud zkusim jinaci server FTP na jinym stroji, tak to funguje... Nema nekdo nejakou radu ??

PS: Tak jsem tam chtel zkusit nahodit pure-ftp ale to mi pri spusteni haze chybu

Kód: [Vybrat]
vps@vps-00002559:/etc/pure-ftpd/auth$ sudo /etc/init.d/pure-ftpd restart
sudo: unable to resolve host vps-00002559
[....] Restarting pure-ftpd (via systemctl): pure-ftpd.serviceJob for pure-ftpd.service failed because the control process exited with error code. See "systemctl status pure-ftpd.service" and "journalctl -xe" for details.
 failed!
Kód: [Vybrat]
vps@vps-00002559:/etc/pure-ftpd/auth$ systemctl status pure-ftpd.service
● pure-ftpd.service
   Loaded: loaded (/etc/init.d/pure-ftpd; bad; vendor preset: enabled)
   Active: failed (Result: exit-code) since Sat 2018-06-02 18:37:50 +02; 11s ago
     Docs: man:systemd-sysv-generator(8)
  Process: 27978 ExecStop=/etc/init.d/pure-ftpd stop (code=exited, status=0/SUCCESS)
  Process: 28265 ExecStart=/etc/init.d/pure-ftpd start (code=exited, status=2)
vps@vps-00002559:/etc/pure-ftpd/auth$

3
Podpora pro Ubuntu Server / zaokrouhleni casu
« kdy: 08 Květen 2018, 21:17:17 »
ahoj , potreboval bych poradit,
uz se stim trapim nekolik dni...
potreboval bych vzit cas aktualni (HHMMSS) a zaokrouhlit ho na cely sekundy dolu (na desitky sekund) a ulozit do promenne $casaktualni

vyreseno

4
Obecná podpora / CRON provede script, ale je tam nekde chyba
« kdy: 04 Duben 2018, 08:27:54 »
Hoj, mam tady script , ktery kdyz pustim manualne tak projde, ale jakmile ho ma pustit cron tak se nevykoba uplne, ale nevim kde najit log kde bych nasel chybu. je to script na poslani souboru pres ftp pomoci curl, kdyz ho pustim ten script manulne tak projde , ale cron nic a nic...

Diky moc

5
Pomoc s hardwarem / Technisat Skystar USB 2
« kdy: 25 Březen 2018, 15:00:18 »
Snazim se rozchodit na Ubuntu 16.04 Skystar 2 USB kartu..

lsusb
Kód: [Vybrat]
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 006: ID 0b95:772b ASIX Electronics Corp. AX88772B
Bus 001 Device 004: ID 13d3:3496 IMC Networks
Bus 001 Device 007: ID 048d:9006 Integrated Technology Express, Inc. IT9135 BDA Afatech DVB-T HDTV Dongle
Bus 001 Device 005: ID 13d0:2282 Techsan Electronics Co., Ltd. TechniSat DVB-PC TV Star 2
Bus 001 Device 003: ID 1a40:0201 Terminus Technology Inc. FE 2.1 7-port Hub
Bus 001 Device 002: ID 0bda:57ed Realtek Semiconductor Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

a dmesg | grep usb
Kód: [Vybrat]
root@Kony-doma:~# dmesg | grep usb
[    0.394904] usbcore: registered new interface driver usbfs
[    0.394954] usbcore: registered new interface driver hub
[    0.395013] usbcore: registered new device driver usb
[    1.957455] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.960686] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.963884] usb usb1: Product: xHCI Host Controller
[    1.967065] usb usb1: Manufacturer: Linux 4.4.0-116-generic xhci-hcd
[    1.970289] usb usb1: SerialNumber: 0000:00:14.0
[    1.988580] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.991752] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.994914] usb usb2: Product: xHCI Host Controller
[    1.998023] usb usb2: Manufacturer: Linux 4.4.0-116-generic xhci-hcd
[    2.001126] usb usb2: SerialNumber: 0000:00:14.0
[    2.757939] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    2.973756] usb 1-1: New USB device found, idVendor=0bda, idProduct=57ed
[    2.987660] usb 1-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.990396] usb 1-1: Product: USB2.0 VGA UVC WebCam
[    2.993017] usb 1-1: Manufacturer: 04081-0005590015481004752
[    2.995651] usb 1-1: SerialNumber: 200901010001
[    3.185500] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[    3.313836] usb 1-2: New USB device found, idVendor=1a40, idProduct=0201
[    3.313853] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.313864] usb 1-2: Product: USB 2.0 Hub [MTT]
[    3.429992] usb 1-3: new full-speed USB device number 4 using xhci_hcd
[    3.560325] usb 1-3: New USB device found, idVendor=13d3, idProduct=3496
[    3.560329] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.629985] usb 1-2.3: new high-speed USB device number 5 using xhci_hcd
[    3.718923] usb 1-2.3: New USB device found, idVendor=13d0, idProduct=2282
[    3.718928] usb 1-2.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.830002] usb 1-4: new high-speed USB device number 6 using xhci_hcd
[    4.032913] usb 1-4: New USB device found, idVendor=0b95, idProduct=772b
[    4.032925] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.032936] usb 1-4: Product: AX88772B
[    4.032951] usb 1-4: Manufacturer: ASIX Elec. Corp.
[    4.032954] usb 1-4: SerialNumber: 2043B0
[    4.102092] usb 1-2.7: new high-speed USB device number 7 using xhci_hcd
[    4.216591] usb 1-2.7: New USB device found, idVendor=048d, idProduct=9006
[    4.216595] usb 1-2.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.216600] usb 1-2.7: Product: DVB-T TV Stick
[    4.216604] usb 1-2.7: Manufacturer: ITE Technologies, Inc.
[    4.231447] usbcore: registered new interface driver usbhid
[    4.231449] usbhid: USB HID core driver
[    4.236569] input: ITE Technologies, Inc. DVB-T TV Stick as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.7/1-2.7:1.1/0003:048D:9006.0001/input/input5
[    4.291539] hid-generic 0003:048D:9006.0001: input,hidraw0: USB HID v1.01 Keyboard [ITE Technologies, Inc. DVB-T TV Stick] on usb-0000:00:14.0-2.7/input1
[    6.945196] usbcore: registered new interface driver dvb_usb_technisat_usb2
[    8.101990] usb 1-2.7: dvb_usb_af9035: prechip_version=83 chip_version=02 chip_type=9135
[    8.102715] usb 1-2.7: dvb_usb_v2: found a 'ITE 9135(9006) Generic' in warm state
[    8.107123] usb 1-2.7: dvb_usb_af9035: [0] overriding tuner from 00 to 60
[    8.109453] usb 1-2.7: dvb_usb_af9035: [1] overriding tuner from 00 to 60
[    8.109647] input: USB2.0 VGA UVC WebCam as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/input/input7
[    8.109841] usbcore: registered new interface driver uvcvideo
[    8.115044] usb 1-2.7: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[    8.116383] usbcore: registered new interface driver btusb
[    8.125318] usb 1-2.7: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
[    8.133628] usb 1-2.7: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[    8.152046] usb 1-2.7: DVB: registering adapter 1 frontend 0 (Afatech AF9033 (DVB-T))...
[    8.172026] usb 1-2.7: dvb_usb_v2: 'ITE 9135(9006) Generic' successfully initialized and connected
[    8.172120] usbcore: registered new interface driver dvb_usb_af9035
[    8.332205] Modules linked in: ath10k_pci(+) ath10k_core ath mac80211 cfg80211 input_leds it913x af9033 btusb btrtl btbcm uvcvideo btintel videobuf2_vmalloc mei_txe videobuf2_memops lpc_ich videobuf2_v4l2 videobuf2_core mei shpchp dvb_usb_af9035 v4l2_common bluetooth dvb_usb_v2 asix(+) videodev usbnet mii media processor_thermal_device intel_soc_dts_iosf snd_intel_sst_acpi snd_intel_sst_core snd_soc_sst_mfld_platform snd_soc_core snd_compress ac97_bus 8250_fintek snd_pcm_dmaengine snd_pcm snd_timer dw_dmac intel_hid dw_dmac_core sparse_keymap snd i2c_designware_platform(+) soundcore i2c_designware_core pwm_lpss_platform spi_pxa2xx_platform pwm_lpss 8250_dw tpm_crb soc_button_array int3403_thermal int3400_thermal int340x_thermal_zone acpi_thermal_rel mac_hid acpi_pad ib_iser rdma_cm iw_cm ib_cm ib_sa
[    8.332285]  ib_mad ib_core ib_addr iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi dvb_usb_technisat_usb2 dvb_usb dvb_core rc_core coretemp autofs4 btrfs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear hid_generic usbhid mmc_block crct10dif_pclmul crc32_pclmul ghash_clmulni_intel i915 aesni_intel aes_x86_64 lrw gf128mul glue_helper i2c_algo_bit ablk_helper cryptd drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm wmi video i2c_hid hid sdhci_acpi fjes sdhci
[    8.968498] asix 1-4:1.0 eth0: register 'asix' at usb-0000:00:14.0-4, ASIX AX88772B USB 2.0 Ethernet, 00:50:b6:20:43:b0
[    8.968612] usbcore: registered new interface driver asix
[   19.077366] usb 1-2.7: DVB: adapter 1 frontend 0 frequency 0 out of range (174000000..862000000)
[   19.409183] usb 1-2.7: DVB: adapter 0 frontend 0 frequency 0 out of range (174000000..862000000)

dmesg | grep technisat

Kód: [Vybrat]
root@Kony-doma:~# dmesg | grep technisat
[    6.945196] usbcore: registered new interface driver dvb_usb_technisat_usb2
[    8.332285]  ib_mad ib_core ib_addr iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi dvb_usb_technisat_usb2 dvb_usb dvb_core rc_core coretemp autofs4 btrfs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear hid_generic usbhid mmc_block crct10dif_pclmul crc32_pclmul ghash_clmulni_intel i915 aesni_intel aes_x86_64 lrw gf128mul glue_helper i2c_algo_bit ablk_helper cryptd drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm wmi video i2c_hid hid sdhci_acpi fjes sdhci
root@Kony-doma:~#


ne a ne to fungovat...

uz sem nahraval do /lib/firmware dvb-usb-SkyStar_USB_HD_FW_v17_63.HEX.fw ale taky nepomohlo

6
Programování pro GNU/Linux / pusteni scriptu kazdych 10 sekund
« kdy: 23 Březen 2018, 11:32:16 »
Mam tady script ktery pousti dalsich 5 scriptu.
potreboval bych do cronu zanest aby se mi to spoustelo vse kazdych 10 sekund..

nyni mam
Kód: [Vybrat]
* * * * * root /opt/pust.sh
* * * * * sleep 10; root /opt/pust.sh
* * * * * sleep 20; root /opt/pust.sh
* * * * * sleep 30; root /opt/pust.sh
* * * * * sleep 40; root /opt/pust.sh
* * * * * sleep 50; root /opt/pust.sh

ale to mi nechce fungovat a nevim proc...

var/log/syslog nic nepise o cronu

PS: dal jsem do scriptu smicku
Kód: [Vybrat]
#!/bin/sh
while [ true ]
do
    sh spust.sh
    sleep 10
done

takze ted se mi to sputi krasne, ale samozrejme kdyz zavru okno, tak se to vypne a to neni dobre...

7
Programování pro GNU/Linux / Zaokrouhleni cisla na desitky
« kdy: 20 Březen 2018, 15:08:58 »
Hoj, mam ve scriptu číslo např. 4567821 a potreboval bych ho zaokrouhlit smerem nahoru na to aby číslo koncilo 0 tzn 4567830 a zase třeba další číslo 876229 zase na číslo 876230.

Lze toto nejak uskutečnit ?? Zkousim prikaz Round , ale zatím jsem všude nasel jen zaokrouhlovani na cela cisla z desetinych

A nebo by stacilo aby se posledni cislo zmenilo na 0

8
Mohl by mi prosim nekdo pomoci s timto ??? Mam pomoci curl stazeny obsah www stranky do souboru stazene.txt a potreboval bych v tomto souboru vyhledat udaj ktery je mezi <td> a </td>
 ve sloupci Value.A tento udaj potom ulozit do souboru. V tomto pripade je to hodnota f4fd45e46fe8d0a537c4071bc9033b84. Tato hodnota Value se na strankach objevuje celkem trikrat a ja potrebuji tu prvni hodnotu od zacatku stranky. Lze tohle nejak docilit ???

                     
Kód: [Vybrat]
   <th>Version</th>
                        <td>1521538231</td>
                    </tr>
                    <tr>
                        <th>Generated</th>
                        <td>2018-03-20 10:30:31 (-22min 22sec)</td>
                    </tr>
                    <tr>
                        <th>Value</th>
                       <td>f4fd45e46fe8d0a537c4071bc9033b84</td>
                    </tr>
                </table>

9
Programování pro GNU/Linux / posunuti casu o 10 sekund
« kdy: 19 Březen 2018, 14:31:32 »
posunuti casu ve vypisu o 10 sekund

hoj pouzivam do promene
Kód: [Vybrat]
NOW2=$(date +"%Y%m%d"_"%H%M%S")a potreboval bych aby se mi ten vypis casu a datumu zvetsil o 10 sekund

tzn ... aktualni vypis datumu a casu je

Kód: [Vybrat]
20180319_143213
a ja potrebuji aby tam bylo o 10 sekund vic, tzn
Kód: [Vybrat]
20180319_143223
pomuzete ??

10
Internet a sítě / TVHeadend a podpora pro MPD streamy
« kdy: 19 Březen 2018, 08:32:10 »
Ahoj, neresil nekdo moznost vlozeni streamu do TVHeadend ve formatu mpd ???
Treba tento stream nelze nijak vlozit
Kód: [Vybrat]
https://ocko-live-dash.ssl.cdn.cra.cz/cra_live2/ocko.stream.1.smil/manifest.mpd

11
Hoj, mam tady script ktery vyuziva curl, ve scriptu bych mel mit vse v poradku, ale ulozi me to soubor s koncovku s pridanym znakem “?”.. vubec nechapu proc... ma me to ulozit do souboru “playlist.txt” ale ulozi “playlist.txt?” A dalsi vec, ze me ten script nechce pracovat s promenyma... ma se ulozit do promeny “token” ale neulozi. Uz nevim kde delam chybu.. nasel by se nekdo kdo by se mi na to pres teamwiever podival ??? Musi to byt pres teamwiever, jsou to dost choulostivy data a nemuzu je posilat jen tak pres mail a nebo pres forum...  dekuji mockrat

VYRESENO

12
Volná diskuze kolem Linuxu a OSS / PCI to USB adapter
« kdy: 15 Březen 2018, 16:33:13 »
Neexistuje takova redukce ?? mam tady DVB-S2 kartu do PCI slotu a potreboval bych ji dat pres redukci do USB

13
Volná diskuze kolem Linuxu a OSS / Koupím USB DVB-S2
« kdy: 15 Březen 2018, 16:32:40 »
Nemate nekdo na prodej ????

14
Obecná podpora / Ubuntu server a usb disky
« kdy: 28 Únor 2018, 19:48:45 »
Hoj, mam nainstalovany Ubuntu server 16.04 a kdyz pripojim jakkykoliv usb disk, tak server ho nevidi..

Fdisk -l ho nenajde..
Zkousim 3.5" disk pres redukci na usb a potom i 2.5 v ramecku. Ani jeden nejede. USB hub jsem koupil uplne novy a externi napajeny a taky nic, jeden disk je 80 GB a druhej 500 GB

Kód: [Vybrat]
Filesystem                       Size  Used Avail Use% Mounted on
udev                             927M     0  927M   0% /dev
tmpfs                            190M  8,2M  182M   5% /run
/dev/mapper/Kony--doma--vg-root   26G  2,0G   23G   9% /
tmpfs                            947M     0  947M   0% /dev/shm
tmpfs                            5,0M     0  5,0M   0% /run/lock
tmpfs                            947M     0  947M   0% /sys/fs/cgroup
/dev/mmcblk0p2                   473M   65M  384M  15% /boot
/dev/mmcblk0p1                   511M  4,6M  507M   1% /boot/efi
//192.168.1.250/kraviny          913G  599G  314G  66% /media/nas
tmpfs                            190M     0  190M   0% /run/user/1000

Kód: [Vybrat]
root@Kony-doma:~# fdisk -l
Disk /dev/mmcblk0: 29,1 GiB, 31268536320 bytes, 61071360 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 22FEF099-EC57-42AB-95AA-38B703289784

Device           Start      End  Sectors  Size Type
/dev/mmcblk0p1    2048  1050623  1048576  512M EFI System
/dev/mmcblk0p2 1050624  2050047   999424  488M Linux filesystem
/dev/mmcblk0p3 2050048 61069311 59019264 28,1G Linux LVM




Disk /dev/mmcblk0boot1: 4 MiB, 4194304 bytes, 8192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mmcblk0boot0: 4 MiB, 4194304 bytes, 8192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mapper/Kony--doma--vg-root: 26,2 GiB, 28164751360 bytes, 55009280 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mapper/Kony--doma--vg-swap_1: 1,9 GiB, 2030043136 bytes, 3964928 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
root@Kony-doma:~#


Tohle me vypisuje dmesg a ve velkym, podle vseho je to kvuli tunerum co mam pripojeny, ale nechapu proc
Kód: [Vybrat]
[ 9123.955710] rtl2832 17-0010: i2c reg read failed -19
[ 9124.759371] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9124.760798] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9124.955751] rtl2832 17-0010: i2c reg read failed -19
[ 9125.955670] rtl2832 17-0010: i2c reg read failed -19
[ 9126.955771] rtl2832 17-0010: i2c reg read failed -19
[ 9127.759699] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9127.761135] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9127.955718] rtl2832 17-0010: i2c reg read failed -19
[ 9128.955361] rtl2832 17-0010: i2c reg read failed -19
[ 9129.955873] rtl2832 17-0010: i2c reg read failed -19
[ 9130.759773] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9130.761215] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9130.956052] rtl2832 17-0010: i2c reg read failed -19
[ 9131.955795] rtl2832 17-0010: i2c reg read failed -19
[ 9132.955951] rtl2832 17-0010: i2c reg read failed -19
[ 9133.759825] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9133.761263] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9133.955856] rtl2832 17-0010: i2c reg read failed -19
[ 9134.955849] rtl2832 17-0010: i2c reg read failed -19
[ 9135.955954] rtl2832 17-0010: i2c reg read failed -19
[ 9136.759903] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9136.761340] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9136.955918] rtl2832 17-0010: i2c reg read failed -19
[ 9137.955927] rtl2832 17-0010: i2c reg read failed -19
[ 9138.955944] rtl2832 17-0010: i2c reg read failed -19
[ 9139.759997] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9139.761437] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9139.956033] rtl2832 17-0010: i2c reg read failed -19
[ 9140.955992] rtl2832 17-0010: i2c reg read failed -19
[ 9141.955777] rtl2832 17-0010: i2c reg read failed -19
[ 9142.760030] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9142.761467] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9142.956130] rtl2832 17-0010: i2c reg read failed -19
[ 9143.956069] rtl2832 17-0010: i2c reg read failed -19
[ 9144.956074] rtl2832 17-0010: i2c reg read failed -19
[ 9145.760101] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9145.761534] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9145.956271] rtl2832 17-0010: i2c reg read failed -19
[ 9146.956135] rtl2832 17-0010: i2c reg read failed -19
[ 9147.956146] rtl2832 17-0010: i2c reg read failed -19
[ 9148.760160] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9148.761595] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9148.956276] rtl2832 17-0010: i2c reg read failed -19
[ 9149.956203] rtl2832 17-0010: i2c reg read failed -19
[ 9150.956210] rtl2832 17-0010: i2c reg read failed -19
[ 9151.760331] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9151.761768] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9151.956279] rtl2832 17-0010: i2c reg read failed -19
[ 9152.956267] rtl2832 17-0010: i2c reg read failed -19
[ 9153.956275] rtl2832 17-0010: i2c reg read failed -19
[ 9154.760310] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9154.761719] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9154.956294] rtl2832 17-0010: i2c reg read failed -19
[ 9155.956407] rtl2832 17-0010: i2c reg read failed -19
[ 9156.956341] rtl2832 17-0010: i2c reg read failed -19
[ 9157.760416] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9157.761848] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9157.956360] rtl2832 17-0010: i2c reg read failed -19
[ 9158.956472] rtl2832 17-0010: i2c reg read failed -19
[ 9159.956413] rtl2832 17-0010: i2c reg read failed -19
[ 9160.760510] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9160.761944] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9160.956425] rtl2832 17-0010: i2c reg read failed -19
[ 9161.956598] rtl2832 17-0010: i2c reg read failed -19
[ 9162.956482] rtl2832 17-0010: i2c reg read failed -19
[ 9163.760580] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9163.762003] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9163.956498] rtl2832 17-0010: i2c reg read failed -19
[ 9164.956630] rtl2832 17-0010: i2c reg read failed -19
[ 9165.956546] rtl2832 17-0010: i2c reg read failed -19
[ 9166.760652] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9166.762077] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9166.956555] rtl2832 17-0010: i2c reg read failed -19
[ 9167.956601] rtl2832 17-0010: i2c reg read failed -19
[ 9168.956612] rtl2832 17-0010: i2c reg read failed -19
[ 9169.760665] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9169.762098] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9169.956623] rtl2832 17-0010: i2c reg read failed -19
[ 9170.956645] rtl2832 17-0010: i2c reg read failed -19
[ 9171.956759] rtl2832 17-0010: i2c reg read failed -19
[ 9172.760430] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9172.761852] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9172.956692] rtl2832 17-0010: i2c reg read failed -19
[ 9173.956695] rtl2832 17-0010: i2c reg read failed -19
[ 9174.956842] rtl2832 17-0010: i2c reg read failed -19
[ 9175.760736] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9175.762161] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9175.956297] rtl2832 17-0010: i2c reg read failed -19
[ 9176.956780] rtl2832 17-0010: i2c reg read failed -19
[ 9177.956914] rtl2832 17-0010: i2c reg read failed -19
[ 9178.760800] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9178.762223] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9178.956820] rtl2832 17-0010: i2c reg read failed -19
[ 9179.956828] rtl2832 17-0010: i2c reg read failed -19
[ 9180.956955] rtl2832 17-0010: i2c reg read failed -19
[ 9181.760852] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9181.762274] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9181.956889] rtl2832 17-0010: i2c reg read failed -19
[ 9182.956887] rtl2832 17-0010: i2c reg read failed -19
[ 9183.956927] rtl2832 17-0010: i2c reg read failed -19
[ 9184.760932] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9184.762342] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9184.957007] rtl2832 17-0010: i2c reg read failed -19
[ 9185.956944] rtl2832 17-0010: i2c reg read failed -19
[ 9186.956984] rtl2832 17-0010: i2c reg read failed -19
[ 9187.760989] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9187.762409] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9187.957104] rtl2832 17-0010: i2c reg read failed -19
[ 9188.957029] rtl2832 17-0010: i2c reg read failed -19
[ 9189.957042] rtl2832 17-0010: i2c reg read failed -19
[ 9190.761083] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9190.762486] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9190.957271] rtl2832 17-0010: i2c reg read failed -19
[ 9191.957093] rtl2832 17-0010: i2c reg read failed -19
[ 9192.957106] rtl2832 17-0010: i2c reg read failed -19
[ 9193.761128] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9193.762553] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9193.957273] rtl2832 17-0010: i2c reg read failed -19
[ 9194.957191] rtl2832 17-0010: i2c reg read failed -19
[ 9195.957158] rtl2832 17-0010: i2c reg read failed -19
[ 9196.761215] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9196.762612] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9196.957269] rtl2832 17-0010: i2c reg read failed -19
[ 9197.957457] rtl2832 17-0010: i2c reg read failed -19
[ 9198.957231] rtl2832 17-0010: i2c reg read failed -19
[ 9199.761262] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9199.762686] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9199.957265] rtl2832 17-0010: i2c reg read failed -19
[ 9200.957369] rtl2832 17-0010: i2c reg read failed -19
[ 9201.957309] rtl2832 17-0010: i2c reg read failed -19
[ 9202.761113] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9202.762543] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9202.957096] rtl2832 17-0010: i2c reg read failed -19
[ 9203.957457] rtl2832 17-0010: i2c reg read failed -19
[ 9204.957381] rtl2832 17-0010: i2c reg read failed -19
[ 9205.761466] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9205.762893] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9205.957395] rtl2832 17-0010: i2c reg read failed -19
[ 9206.957597] rtl2832 17-0010: i2c reg read failed -19
[ 9207.957199] rtl2832 17-0010: i2c reg read failed -19
[ 9208.761566] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9208.762988] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9208.957459] rtl2832 17-0010: i2c reg read failed -19
[ 9209.957592] rtl2832 17-0010: i2c reg read failed -19
[ 9210.957513] rtl2832 17-0010: i2c reg read failed -19
[ 9211.761651] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9211.763073] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9211.957519] rtl2832 17-0010: i2c reg read failed -19
[ 9212.957588] rtl2832 17-0010: i2c reg read failed -19
[ 9213.957411] rtl2832 17-0010: i2c reg read failed -19
[ 9214.761676] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9214.763097] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9214.957581] rtl2832 17-0010: i2c reg read failed -19
[ 9215.957588] rtl2832 17-0010: i2c reg read failed -19
[ 9216.957985] rtl2832 17-0010: i2c reg read failed -19
[ 9217.761645] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9217.763080] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9217.957651] rtl2832 17-0010: i2c reg read failed -19
[ 9218.957678] rtl2832 17-0010: i2c reg read failed -19
[ 9219.957778] rtl2832 17-0010: i2c reg read failed -19
[ 9220.761594] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9220.763016] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9220.957724] rtl2832 17-0010: i2c reg read failed -19
[ 9221.957734] rtl2832 17-0010: i2c reg read failed -19
[ 9222.957920] rtl2832 17-0010: i2c reg read failed -19
[ 9223.761771] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9223.763190] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9223.957797] rtl2832 17-0010: i2c reg read failed -19
[ 9224.957801] rtl2832 17-0010: i2c reg read failed -19
[ 9225.958213] rtl2832 17-0010: i2c reg read failed -19
[ 9226.761840] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9226.763259] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9226.957855] rtl2832 17-0010: i2c reg read failed -19
[ 9227.957869] rtl2832 17-0010: i2c reg read failed -19
[ 9228.957929] rtl2832 17-0010: i2c reg read failed -19
[ 9229.761901] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9229.763333] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9229.957935] rtl2832 17-0010: i2c reg read failed -19
[ 9230.957924] rtl2832 17-0010: i2c reg read failed -19
[ 9231.957950] rtl2832 17-0010: i2c reg read failed -19
[ 9232.761956] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9232.763386] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9232.958050] rtl2832 17-0010: i2c reg read failed -19
[ 9233.957631] rtl2832 17-0010: i2c reg read failed -19
[ 9234.958008] rtl2832 17-0010: i2c reg read failed -19
[ 9235.762023] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9235.763457] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9235.958292] rtl2832 17-0010: i2c reg read failed -19
[ 9236.958060] rtl2832 17-0010: i2c reg read failed -19
[ 9237.958079] rtl2832 17-0010: i2c reg read failed -19
[ 9238.762093] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9238.763517] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9238.958240] rtl2832 17-0010: i2c reg read failed -19
[ 9239.958136] rtl2832 17-0010: i2c reg read failed -19
[ 9240.958140] rtl2832 17-0010: i2c reg read failed -19
[ 9241.762173] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9241.763592] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9241.958281] rtl2832 17-0010: i2c reg read failed -19
[ 9242.958199] rtl2832 17-0010: i2c reg read failed -19
[ 9243.958207] rtl2832 17-0010: i2c reg read failed -19
[ 9244.762235] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9244.763649] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9244.958246] rtl2832 17-0010: i2c reg read failed -19
[ 9245.958296] rtl2832 17-0010: i2c reg read failed -19
[ 9246.958280] rtl2832 17-0010: i2c reg read failed -19
[ 9247.762274] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9247.763686] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9247.958296] rtl2832 17-0010: i2c reg read failed -19
[ 9248.958404] rtl2832 17-0010: i2c reg read failed -19
[ 9249.958341] rtl2832 17-0010: i2c reg read failed -19
[ 9250.762389] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9250.763806] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9250.958356] rtl2832 17-0010: i2c reg read failed -19
[ 9251.958502] rtl2832 17-0010: i2c reg read failed -19
[ 9252.958406] rtl2832 17-0010: i2c reg read failed -19
[ 9253.762512] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9253.763923] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9253.958424] rtl2832 17-0010: i2c reg read failed -19
[ 9254.958585] rtl2832 17-0010: i2c reg read failed -19
[ 9255.958490] rtl2832 17-0010: i2c reg read failed -19
[ 9256.762635] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9256.764049] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9256.958489] rtl2832 17-0010: i2c reg read failed -19
[ 9257.958618] rtl2832 17-0010: i2c reg read failed -19
[ 9258.958545] rtl2832 17-0010: i2c reg read failed -19
[ 9259.762670] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9259.764079] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9259.958555] rtl2832 17-0010: i2c reg read failed -19
[ 9260.958569] rtl2832 17-0010: i2c reg read failed -19
[ 9261.958644] rtl2832 17-0010: i2c reg read failed -19
[ 9262.762633] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9262.764042] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9262.958613] rtl2832 17-0010: i2c reg read failed -19
[ 9263.958645] rtl2832 17-0010: i2c reg read failed -19
[ 9264.958750] rtl2832 17-0010: i2c reg read failed -19
[ 9265.762680] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9265.764089] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9265.958691] rtl2832 17-0010: i2c reg read failed -19
[ 9266.958331] rtl2832 17-0010: i2c reg read failed -19
[ 9267.958847] rtl2832 17-0010: i2c reg read failed -19
[ 9268.762622] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9268.764029] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9268.958750] rtl2832 17-0010: i2c reg read failed -19
[ 9269.958773] rtl2832 17-0010: i2c reg read failed -19
[ 9270.958917] rtl2832 17-0010: i2c reg read failed -19
[ 9271.762813] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9271.764219] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9271.958829] rtl2832 17-0010: i2c reg read failed -19
[ 9272.958828] rtl2832 17-0010: i2c reg read failed -19
[ 9273.958926] rtl2832 17-0010: i2c reg read failed -19
[ 9274.762878] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9274.764283] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9274.958887] rtl2832 17-0010: i2c reg read failed -19
[ 9275.958903] rtl2832 17-0010: i2c reg read failed -19
[ 9276.958913] rtl2832 17-0010: i2c reg read failed -19
[ 9277.762932] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9277.764336] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9277.959011] rtl2832 17-0010: i2c reg read failed -19
[ 9278.958957] rtl2832 17-0010: i2c reg read failed -19
[ 9279.958977] rtl2832 17-0010: i2c reg read failed -19
[ 9280.762994] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9280.764401] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9280.959101] rtl2832 17-0010: i2c reg read failed -19
[ 9281.959032] rtl2832 17-0010: i2c reg read failed -19
[ 9282.959043] rtl2832 17-0010: i2c reg read failed -19
[ 9283.763071] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9283.764471] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9283.958981] rtl2832 17-0010: i2c reg read failed -19
[ 9284.959101] rtl2832 17-0010: i2c reg read failed -19
[ 9285.959116] rtl2832 17-0010: i2c reg read failed -19
[ 9286.763136] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9286.764533] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9286.959243] rtl2832 17-0010: i2c reg read failed -19
[ 9287.959184] rtl2832 17-0010: i2c reg read failed -19
[ 9288.959179] rtl2832 17-0010: i2c reg read failed -19
[ 9289.763208] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9289.764609] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9289.959253] rtl2832 17-0010: i2c reg read failed -19
[ 9290.958809] rtl2832 17-0010: i2c reg read failed -19
[ 9291.959243] rtl2832 17-0010: i2c reg read failed -19
[ 9292.763273] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9292.764670] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9292.959265] rtl2832 17-0010: i2c reg read failed -19
[ 9293.959339] rtl2832 17-0010: i2c reg read failed -19
[ 9294.959308] rtl2832 17-0010: i2c reg read failed -19
[ 9295.763400] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9295.764800] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9295.959328] rtl2832 17-0010: i2c reg read failed -19
[ 9296.959453] rtl2832 17-0010: i2c reg read failed -19
[ 9297.959372] rtl2832 17-0010: i2c reg read failed -19
[ 9298.763493] usb 1-2.7: dvb_usb_v2: usb_bulk_msg() failed=-19
[ 9298.764893] af9033 12-0038: i2c rd failed=-19 reg=800047 len=1
[ 9298.959394] rtl2832 17-0010: i2c reg read failed -19
[ 9299.959138] rtl2832 17-0010: i2c reg read failed -19
[ 9300.959477] rtl2832 17-0010: i2c reg read failed -19

ve /var/log/syslog.1 jsem nasel
Kód: [Vybrat]
eb 28 18:00:07 Kony-doma kernel: [78776.555441] usb-storage 1-2.1:1.0: USB Mass Storage device detected
Feb 28 18:00:07 Kony-doma kernel: [78776.559848] scsi host1: usb-storage 1-2.1:1.0
Feb 28 18:00:08 Kony-doma kernel: [78777.560115] scsi 1:0:0:0: Direct-Access     WDC WD50 00AACS-00G8B1    4C05 PQ: 0 ANSI: 2 CCS
Feb 28 18:00:08 Kony-doma kernel: [78777.563241] sd 1:0:0:0: Attached scsi generic sg0 type 0
Feb 28 18:00:08 Kony-doma kernel: [78777.563818] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
Feb 28 18:00:08 Kony-doma kernel: [78777.564588] sd 1:0:0:0: [sda] Write Protect is off
Feb 28 18:00:08 Kony-doma kernel: [78777.564616] sd 1:0:0:0: [sda] Mode Sense: 00 38 00 00
Feb 28 18:00:08 Kony-doma kernel: [78777.565282] sd 1:0:0:0: [sda] Asking for cache data failed
Feb 28 18:00:08 Kony-doma kernel: [78777.565545] sd 1:0:0:0: [sda] Assuming drive cache: write through
Feb 28 18:00:08 Kony-doma kernel: [78777.594671]  sda:
Feb 28 18:00:08 Kony-doma kernel: [78777.596852] sd 1:0:0:0: [sda] Attached SCSI disk

takze by ho snad mel videt, ale nechapu proc ho nechce sformatovat

kdyz dam fdisk /dev/sda
Kód: [Vybrat]
root@Kony-doma:~# fdisk /dev/sda

Welcome to fdisk (util-linux 2.27.1).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.

fdisk: cannot open /dev/sda: No such file or directory

ted jsem dal dd if=/dev/zero of=/dev/sda
Kód: [Vybrat]
dd: writing to '/dev/sda': No space left on device
1898137+0 records in
1898136+0 records out
971845632 bytes (972 MB, 927 MiB) copied, 4,36845 s, 222 MB/s

a potom fdisk /dev/sda
Kód: [Vybrat]
root@Kony-doma:~# fdisk /dev/sda

Welcome to fdisk (util-linux 2.27.1).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.

Device does not contain a recognized partition table.
Created a new DOS disklabel with disk identifier 0x7a068cc4.

jen nechapu proc to pise ze to ma velikost 1 GB kdyz to ma mit 500G



Tak vyreseno :

nano /etc/modprobe.d/dvb-options.conf

a tam dopsat :
Kód: [Vybrat]
options dvb_usb_v2 disable_rc_polling=1
options rc_core disable_rc_polling=1

vypisy v dmesg prestaly a disk to taky uz naslo

15
Podpora pro Ubuntu Server / Dekodovani streamu pomoci key
« kdy: 24 Únor 2018, 16:58:08 »
Hoj, je nejaka moznost dekodovat stream ve formatu m3u8?? Mam k tomu i platny key v souboru... treba pomoci ffmpeg..

Diky za info

16
Obecná podpora / kompilace jadra pro vice USB Tuneru
« kdy: 16 Únor 2018, 09:15:32 »
hoj, podle tohoto https://tvheadend.org/boards/5/topics/21133?r=21388 mam uplne presne stejny problem. Mohl by mi prosim nekdo poradit na postup kompilace jadra ??

17
Podpora pro Ubuntu Server / notebook ASUS jako server
« kdy: 02 Únor 2018, 20:48:10 »
hoj,mam tady notebook asus E200H a na nej jsem nainstaloval ubuntu server 16.0.4, ale mam problem s USB sitovkou. dmesg sitovku nasel a priradil ji eth0, ale když dam ifconfig eth0 tak to vypise

Kód: [Vybrat]
error fetching interface information. Device not found
dmesg pise

Kód: [Vybrat]
eth0: registered at usb-0000:00:12.0-4, D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter, e4:6f:13:f4:41:3f
renamed from eth0

když dam ifconfig eth0 tak to pise

Kód: [Vybrat]
ERROR while getting interfaces flags : No such device

je nejaka moznost tohle rozchodit ???



PS: Vyreseno.... dal jsem ifconfig -a a zjistil jsem ze sitovka ma sileny nazev neco jako f8748fg45 atd... takze timto nazvem vse uz jede

PPS2 : tak moc nevyreseno. sice jsem sitovku nakopl, ale jakmile jsem zadal udaje do /etc/network/interfaces tak po restartu se sitovka site na chvilku rozsvitila, ale potom zhasla a musel jsem ji manualne nahodit pres ifconfig xxxxx up

a navic po chvilce se vypne.. proste se ztrati a musim ji vytahnout z USB a znovu zapnout

18
Podpora pro Ubuntu Server / tvheadend a snizeni datoveho toku
« kdy: 30 Leden 2018, 12:52:04 »
Hoj, je nejaka moznost jak v TVHeadend snizit datovy tok streamu aniz bych nejak moc vytizil CPU ??

mam v Alixu DVB-T (2x dvojtuner) a chci preposlat streamu s DVB do site, ale u jednoho PC mi to semtam zasekne, je na wifi (slabsi wifi) a potreboval bych ty streamy trosku oseknout

19
Podpora pro Ubuntu Server / Ubuntu 16.04 a .htaccess
« kdy: 26 Leden 2018, 15:19:00 »
Tak se snazim dat www stranky pod login a heslo tak jak jsem to mel v minulych verzich, ale porad neco spatne. cetl jsem ze od verze apache 2.4 je jinaci styl upravy..

/etc/apache2/sites-enable/@000-default.conf jsem pridal

Kód: [Vybrat]
    <Directory /var/www/html>
        Options Indexes FollowSymLinks MultiViews
        AllowOverride All
        Require all granted

zapl jsem
Kód: [Vybrat]
a2enmod rewrite
.htaccess
Kód: [Vybrat]
AuthUserFile /var/www/html/.htpasswd
AuthGroupFile /dev/null
AuthName "Nazev tajne casti stranek"
AuthType Basic
Require valid-user
Order deny,allow
RewriteEngine on

ale jakmile tohle udelam tak www stranka pise

Kód: [Vybrat]
Internal Server Error

The server encountered an internal error or misconfiguration and was unable to complete your request.

Please contact the server administrator at webmaster@localhost to inform them of the time this error occurred, and the actions you performed just before this error.

More information about this error may be available in the server error log.
Apache/2.4.18 (Ubuntu) Server at 192.168.86.77 Port 80

jakmile umazu v "/etc/apache2/sites-enable/@000-default.conf" to co jsem pridal tak vse jede



PS: Vyreseno

z .htaccess umazat radek
Kód: [Vybrat]
AuthGroupFile /dev/null

20
Podpora pro Ubuntu Server / ubuntu a chyba zavislosti
« kdy: 25 Leden 2018, 09:28:44 »
zkousim delat apt-get upgrade a haze mi to porad tuto chybu

Kód: [Vybrat]
root@kony:~# apt-get upgrade
Čtu seznamy balíků… Hotovo
Vytvářím strom závislostí
Čtu stavové informace… Hotovo
Pro opravení můžete spustit „apt-get -f install“.
Následující balíky mají nesplněné závislosti:
 libc-dev-bin : Závisí na: libc6 (< 2.16) ale 2.16-0ubuntu6 je nainstalován
 libc6-dev : Závisí na: libc6 (= 2.15-0ubuntu10.18) ale 2.16-0ubuntu6 je nainstalován
 libnih1 : Předzávisí na: libc6 (< 2.16) ale 2.16-0ubuntu6 je nainstalován
E: Nesplněné závislosti. Zkuste použít -f.

i kdyz dam apt-get -f install tak to hodi chybu

Kód: [Vybrat]
root@kony:~# apt-get -f install
Čtu seznamy balíků… Hotovo
Vytvářím strom závislostí
Čtu stavové informace… Hotovo
Opravuji závislosti… selhalo.
Následující balíky mají nesplněné závislosti:
 libc-dev-bin : Závisí na: libc6 (< 2.16) ale 2.16-0ubuntu6 je nainstalován
 libc6-dev : Závisí na: libc6 (= 2.15-0ubuntu10.18) ale 2.16-0ubuntu6 je nainstalován
 libnih1 : Předzávisí na: libc6 (< 2.16) ale 2.16-0ubuntu6 je nainstalován
E: Chyba, pkgProblemResolver::Resolve vytváří poruchy, to může být způsobeno podrženými balíky.
E: Nelze opravit závislosti


21
Podpora pro Ubuntu Server / zadne misto na disku
« kdy: 23 Leden 2018, 13:38:07 »
hoj.. chtel bych se zeptat. je nejaka moznost za behu upravit misto na disku ???

Kód: [Vybrat]
Souborový systém            Velikost Užito Volno Uži% Připojeno do
udev                            476M     0  476M   0% /dev
tmpfs                           100M   12M   88M  13% /run
/dev/mapper/server--vg-root      28G   15G   12G  56% /
tmpfs                           496M     0  496M   0% /dev/shm
tmpfs                           5,0M     0  5,0M   0% /run/lock
tmpfs                           496M     0  496M   0% /sys/fs/cgroup
/dev/sda1                       472M  467M     0 100% /boot
/dev/sdb1                       230G   16G  202G   8% /media/data
tmpfs                           100M     0  100M   0% /run/user/1000


sdb1 je HDD v USB, ale na internim disku je jeste 12 GB mista, tak bych potreboval to misto nejak upravit.. aspon 8 GB dat na /boot

diky

22
Internet a sítě / pomoc s nastavenim mysql
« kdy: 14 Červen 2017, 19:59:03 »
nainstaloval jsem na server mysql, a potrebuji aby kdokoliv se na tuto databazi mohl prihlasit. Jakmile se na ni prihlasuju na tom stroji (pres www stranky) tak vse jede, ale kdyz ji zavolam pres aplikaci v delphi na nejakym jinacim stroji, tak nefunkcni. Mohl by mi prosim poradit co u uzivatele nastavit a nebo v databazi aby byla funkcni ?? Dekuji mockrat

23
Internet a sítě / pomoc s nastavenim OpenVPN serveru na Ubuntu
« kdy: 12 Květen 2017, 21:47:27 »
Hoj, ansel by se tady prosim nekdo kdo by me pomohl s konfiguraci OpenVPN serveru na mym serveru ????
nyni me tam bezi OpenVPN client, ale potreboval bych jeste nakonfigorovat server... a potom nasledne vysvetlit generovani certifikatu.... Bylo by to pomoci TeamVieweru.. dekuji mockrat za pomoc.. pro profika urcite otazka par minut, ale ja se stim uz tapu nekolik dni. a porad mi to nechce vytvorit vyrtualni sitovku...

24
Internet a sítě / nejde stahovat soubory z www (muj server)
« kdy: 26 Duben 2017, 10:47:08 »
Hoj, mam na serveru nahozeny ubuntu. pres FTP chci nahrat soubory na server (mam vytvoreny symlink z www/html/sdilene do media/data (tohle je HDD), do media/data mam nasmerovany FTP).. Na FTP nahravam pomoci loginu XXX, root login mam zakazany..
A ted otazka:
Nahraju nejaky soubor na FTP. otevru si http://adresaserveru/sdilene tam sice soubory co jsem nahral vydim, ale nejdou mi stahnout, hlasi mi to chybu
Kód: [Vybrat]
Forbidden

You don't have permission to access /sdilene/winbox.exe on this server.
Apache/2.4.18 (Ubuntu) Server at XXX.XX Port 80

at zkousim davat te slozce jakkykoliv prava (mam tam CHMOD 777), tak porad stejny vysledek.... zkousel jsem slozce nastavit vlastnictvi i na www-data ale porad to samy...

mohl by mi prosim nekdo poradit kde porad delam chybu ???




PS: Tak ted jsem nahral primo soubory do /var/www/sdilene a taky mi nejdou stahnout, pokud je tam nahraju pres FTP pres krery se prihlasuju jako obyc uzivatel, ale jakmile se pripomij na SSH a po zadani sudo -s se prihlasim, tak uz to potom funguje vse jak ma....


Tak jsem se dival a kdyz nahraju ten soubor pres FTP tak nema dostatecne opravneni ... jakmile zadam chmod 555 okamzite jde normalne stahnout

25
Internet a sítě / Tvheadend a hbbtv
« kdy: 10 Březen 2017, 22:51:34 »
hoj, je nejaka moznost aktivovat nebo nejak pouzit hbbtv u Tvheadend ??? Jedna se mi o program o2TV, kde by se dalo pres hbbtv zaplatit prenos na 24 hodin..... ze bych nejak vyvolal nabidku hbbtv kde me to asi ukaze SMS kod co mam poslat a potom by me to odkodovalo placenou nabidku o2TV na 24 hodin

viz tohle
http://www.parabola.cz/clanky/6104/o2-tv-free-nabidne-cast-obsahu-zdarma-ale-i-za-poplatek/

Stran: [1] 2 3