Nemuzu najit adresar .conky

[Petr Sedlák]

Dobry jester, snazim se rozchodit conky. chtel bych vlozit skript do adresare .conky, ale nemuzu ho najit. Vim ze je skryty ale nedari se. musim ho snad vytvorit? diky

[copcas]

postupaval jsi podle http://wiki.ubuntu.cz/Conky?highlight=%28conky%29?
tam se navic nepise o .conky ale o .conkyrc
jakymi zpusoby si ho hledal?

[tomato]

adresar .conky neni vubec nutny..
conky mi beha bez nej, staci mit v domovsem adresari soubor .conkyrc, ve kterem si nastavujes konfikuraci..
jinak osubor se da nalezt treba pres nautila - slaceni klaves Ctrl+h = klinuti mysi na ¨Zobrazit / zobrazit skryte soubory¨ nebo lze soubor jednoduse editovat napr. pres konzoli prikazem ¨gedit ~/.conkyrc¨ (gedit plati v pripade, ze pouzivas gnome)..

a skript na spousteni (ala .conkystartup) je taky mozne mit primo v domovskem adresari..

[premet]

Být vám projel bych si návod na Conky zde na foru, kde naleznete i různé přiklady Conky a jiné rady  http://forum.ubuntu.cz/index.php?topic=18355.90

[Petr Sedlák]

na foru jsem nasel tento navod na conky: http://forum.ubuntu.cz/index.php?topic=18355.75 a tam je napr. ~/.conky/rates.pl, coz znamena ze se ten skript uklada nekam do toho adresare, neni-liz pravda?

[stderr]

Conky samotné bere nastavení jen a pouze ze souboru .conkyrc, pokud si do něj někdo přidá, že chce nahrát skript ze složky .conky, pak si také složku musí vytvořit, ne? Takže mkdir .conky a je to...

[Petr Sedlák]

supr dikes:)

[Petr Sedlák]

Tak jsem se snazil to rozbehat, ale vyhodilo mi to z terminalu toto:
cud@cud-laptop:~$ conky
Conky: desktop window (e000bd) is subwindow of root window (1a5)
Conky: window type - normal
Conky: drawing to created window (4400001)
Conky: drawing to double buffer
Can't locate XML/Simple.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /home/cud/.conky/weather.pl line 4.
BEGIN failed--compilation aborted at /home/cud/.conky/weather.pl line 4.
Can't locate XML/Simple.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /home/cud/.conky/weather.pl line 4.
BEGIN failed--compilation aborted at /home/cud/.conky/weather.pl line 4.
Can't locate XML/Simple.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /home/cud/.conky/weather.pl line 4.
BEGIN failed--compilation aborted at /home/cud/.conky/weather.pl line 4.
Can't locate XML/Simple.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /home/cud/.conky/weather.pl line 4.
BEGIN failed--compilation aborted at /home/cud/.conky/weather.pl line 4.
Can't locate XML/Simple.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /home/cud/.conky/weather.pl line 4.
BEGIN failed--compilation aborted at /home/cud/.conky/weather.pl line 4.
Can't locate XML/Simple.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /home/cud/.conky/weather.pl line 4.
BEGIN failed--compilation aborted at /home/cud/.conky/weather.pl line 4.
Can't locate XML/Simple.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /home/cud/.conky/weather.pl line 4.
BEGIN failed--compilation aborted at /home/cud/.conky/weather.pl line 4.
Can't locate XML/Simple.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /home/cud/.conky/weather.pl line 4.
BEGIN failed--compilation aborted at /home/cud/.conky/weather.pl line 4.
Can't locate XML/Simple.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /home/cud/.conky/weather.pl line 4.
BEGIN failed--compilation aborted at /home/cud/.conky/weather.pl line 4.
Can't locate XML/Simple.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /home/cud/.conky/weather.pl line 4.
BEGIN failed--compilation aborted at /home/cud/.conky/weather.pl line 4.
Can't locate XML/Simple.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /home/cud/.conky/weather.pl line 4.
BEGIN failed--compilation aborted at /home/cud/.conky/weather.pl line 4.
Can't locate XML/Simple.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /home/cud/.conky/weather.pl line 4.
BEGIN failed--compilation aborted at /home/cud/.conky/weather.pl line 4.
Can't locate XML/Simple.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /home/cud/.conky/weather.pl line 4.
BEGIN failed--compilation aborted at /home/cud/.conky/weather.pl line 4.
Can't locate XML/Simple.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /home/cud/.conky/weather.pl line 4.
BEGIN failed--compilation aborted at /home/cud/.conky/weather.pl line 4.
Can't locate XML/Simple.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /home/cud/.conky/tv.pl line 4.
BEGIN failed--compilation aborted at /home/cud/.conky/tv.pl line 4.
Can't locate XML/Simple.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /home/cud/.conky/tv.pl line 4.
BEGIN failed--compilation aborted at /home/cud/.conky/tv.pl line 4.
Can't locate XML/Simple.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /home/cud/.conky/tv.pl line 4.
BEGIN failed--compilation aborted at /home/cud/.conky/tv.pl line 4.
Can't locate XML/Simple.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /home/cud/.conky/tv.pl line 4.
BEGIN failed--compilation aborted at /home/cud/.conky/tv.pl line 4.
Can't locate XML/Simple.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /home/cud/.conky/tv.pl line 4.
BEGIN failed--compilation aborted at /home/cud/.conky/tv.pl line 4.
Can't locate XML/Simple.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /home/cud/.conky/tv.pl line 4.
BEGIN failed--compilation aborted at /home/cud/.conky/tv.pl line 4.
Can't locate XML/Simple.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /home/cud/.conky/tv.pl line 4.
BEGIN failed--compilation aborted at /home/cud/.conky/tv.pl line 4.
Can't locate XML/Simple.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /home/cud/.conky/tv.pl line 4.
BEGIN failed--compilation aborted at /home/cud/.conky/tv.pl line 4.
Can't locate XML/Simple.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /home/cud/.conky/tv.pl line 4.
BEGIN failed--compilation aborted at /home/cud/.conky/tv.pl line 4.

Už jsem tu nedke videl ze musim mit nainstaleny perl, jenze jsem se koukal do synapticu a uz ho tam mam... Jinak je myslim dost dobre vyidet ze prave pocasi a Tv nefunguje

[stderr]

No jasan, tak koukni co je na řádce 4 v těch skriptech: use XML::Simple; ten modul (nebo co to je) nemáš v Perlu, takže šup na google a: např. tu je postup instalace http://articles.techrepublic.com.com/5100-22-5363190.html

[Petr Sedlák]

wow, tak na tohle fakt nemam. Jsem lama, priznam se, budu si muset vystacit jen s obycejnymi conky

[stderr]

wow, tak na tohle fakt nemam. Jsem lama, priznam se, budu si muset vystacit jen s obycejnymi conky

Nic těžkýho. Pravda, že ten předchozí odkaz není z nejlepších, takže: stáhneš (http://search.cpan.org/CPAN/authors/id/G/GR/GRANTM/XML-Simple-2.18.tar.gz), rozbalíš (tar -xvf jmeno.souboru) a nainstaluješ (http://www.linuxsoft.cz/article.php?id_article=1299 - instalace modulu). Ale jak chceš

[chrasty]

Petr Sedlak: Zkus pres synaptic nainstalovat "libxml-simple-perl".

[Petr Sedlák]

pomohlo to, v synapticu jsem nainstalil libx... a vali to, krom toho ze mi to v pocasi msito znaku ukazuje jen pismena a jeste nevim jak docilit toho aby conky zustavalo na plose, pokazde se ztrati, kdyz to treba hodim do firefoxu..

[chrasty]

Misto znaku pismena: Je treba nainstalovat tenhle font www.zsvejprnice.cz/upload/weather.tar.gz. "Vetkni" sem obsah ~/.conkyrc

[Petr Sedlák]

jeste otazecka, kam to mam rozbalit?
vkládám .conkyrc


double_buffer yes
own_window  yes
own_window_transparent yes
own_window_type normal
own_window_hints undecorate,sticky,skip_taskbar,skip_pager,below
draw_borders no
border_margin 1
draw_shades no
alignment top_left
gap_y 0
gap_x 1040
update_interval 10
use_xft yes
xftfont bauhaus:pixelsize=11
use_spacer no
maximum_width 240

# disc bars
color1 444444
# memory bars
color2 444444
# CPU bar
color3 lightgray

TEXT
Kurzy $hr
${execi 3600 perl ~/.conky/rates.pl info}
Počasí $hr
${Font bauhaus:pixelsize=9}${execi 900 perl ~/.conky/weather.pl update_info EZXX0033 m 6}

               ${goto   5}${execi 900 perl ~/.conky/weather.pl temperature 1 0}${goto 55}${execi 900 perl ~/.conky/weather.pl temperature 2 0}${goto 105}${execi 900 perl ~/.conky/weather.pl temperature 3 0}${goto 155}${execi 900 perl ~/.conky/weather.pl temperature 4 0}${goto 205}${execi 900 perl ~/.conky/weather.pl temperature 5 0}
${voffset -102}${goto  20}${Font bauhaus:pixelsize=25}${execi 900 perl ~/.conky/weather.pl cc_temperature}
${voffset  -92}${goto  15}${Font weather:size=65}${execi 900 perl ~/.conky/weather.pl cc_symbol}
${voffset  -63}${goto 215}${Font weather:size=25}${execi 900 perl ~/.conky/weather.pl cc_moon}
${voffset   15}${goto   5}${execi 900 perl ~/.conky/weather.pl symbol 1 0}${goto 55}${execi 900 perl ~/.conky/weather.pl symbol 2 0}${goto 105}${execi 900 perl ~/.conky/weather.pl symbol 3 0}${goto 155}${execi 900 perl ~/.conky/weather.pl symbol 4 0}${goto 205}${execi 900 perl ~/.conky/weather.pl symbol 5 0}$font
${voffset  -63}Předpověď $stippled_hr

${voffset   50}${downspeedgraph eth0 60,115 555555 aaaaaa}$alignr${upspeedgraph eth0 60,115 555555 aaaaaa}
${voffset  -65}${goto  5}${totaldown  eth0} kB/s${goto 131}${totalup  eth0}
               ${goto  5}${downspeed eth0} kB/s${goto 131}${upspeed eth0} kB/s
${voffset   -5}${goto 45}${Font bauhaus:pixelsize=25}↓${goto 175}↑$font

${cpugraph 92,240 0000ff 0000ff}
${voffset  -98}${goto 5}Využití procesoru: ${cpu}%${goto 138}$color3${cpubar 5,100}$color
 Běžících procesů: $running_processes ${alignr 2}Procesů celkem: $processes
${Font bauhaus:pixelsize=9}  Jméno${goto 85}CPU%${goto 128}Jméno${goto 213}CPU%
  ${top name 1}${goto 85}${top cpu 1}${goto 128}${top name 5}${goto 213}${top cpu 5}
  ${top name 2}${goto 85}${top cpu 2}${goto 128}${top name 6}${goto 213}${top cpu 6}
  ${top name 3}${goto 85}${top cpu 3}${goto 128}${top name 7}${goto 213}${top cpu 7}
  ${top name 4}${goto 85}${top cpu 4}${goto 128}${top name 8}${goto 213}${top cpu 8}$font
$color2${goto 4}${membar 14, 233}${color}
${voffset   -9}${goto 6}RAM${goto 38}($memmax)${goto 120}$memperc%${goto 185}$mem
$color2${goto 4}${swapbar 14, 233}${color}
${voffset   -9}${goto 6}SWAP${goto 38}($swapmax)${goto 120}$swapperc%${goto 185}$swap
${Font bauhaus:pixelsize=9}  Jméno${goto 85}Mem%${goto 128}Jméno${goto 213}Mem%
  ${top_mem name 1}${goto 85}${top_mem mem 1}${goto 128}${top_mem name 5}${goto 213}${top_mem mem 5}
  ${top_mem name 2}${goto 85}${top_mem mem 2}${goto 128}${top_mem name 6}${goto 213}${top_mem mem 6}
  ${top_mem name 3}${goto 85}${top_mem mem 3}${goto 128}${top_mem name 7}${goto 213}${top_mem mem 7}
  ${top_mem name 4}${goto 85}${top_mem mem 4}${goto 128}${top_mem name 8}${goto 213}${top_mem mem 8}$font


TV právě běží $hr${execi 300 perl ~/.conky/tv.pl update}${Font bauhaus:pixelsize=9}
${execi 300 perl ~/.conky/tv.pl head 0}
$color3${execi 300 perl ~/.conky/tv.pl description 0}$color
${execi 300 perl ~/.conky/tv.pl head 1}
$color3${execi 300 perl ~/.conky/tv.pl description 1}$color
${execi 300 perl ~/.conky/tv.pl head 2}
$color3${execi 300 perl ~/.conky/tv.pl description 2}$color
${execi 300 perl ~/.conky/tv.pl head 3}
$color3${execi 300 perl ~/.conky/tv.pl description 3}$color$font

[chrasty]

Rozbal si ho kam chces, pak zkus:

Kód: [Vybrat]

# sudo mkdir /usr/share/fonts/truetype/myfonts
# sudo cp  weather.ttf /usr/share/fonts/truetype/myfonts
# fc-cache -f -v


Udelej si zalohu tveho ~/.conkyrc a zkus nad "TEXT" dat tohle a uprav si to podle sebe. Nejsem v tom kovanej, tohle jsem take odkoukal, tak snad to pomuze. Takhle to dopada, kdyz radi LAMA. 

Kód: [Vybrat]

# Create own window instead of using desktop (required in nautilus)
own_window yes
own_window_type override
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager

# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes

# fiddle with window
use_spacer yes
use_xft yes
xftfont sans:size=8.5

# Update interval in seconds
update_interval 1.0

# Minimum size of text area
minimum_size 5 5

# Draw shades?
draw_shades no

# border margins
border_margin 9

# border width
border_width 10

# Default colors and also border colors, grey90 == #e5e5e5
default_color grey

own_window_colour brown
own_window_transparent yes

# Text alignment, other possible values are commented
alignment top_right

# Gap between borders of screen and text
gap_x 10
gap_y 10


[Petr Sedlák]

Diky moc, fonty vali, i kdyz jsem to teda delal pres nautilus , diky moc jste fakt machri ja uz to chtel vzdat , jinak se v tom jeset pohrabu a kdyby neco ozvu se. Diky noch einmal.
Akorat teda jeste to ze mi to mizi, ale na to asi ten skript co jsi mi poslal, vyzkousim to pozdeji ted musim valit do skoly.

[Petr Sedlák]

Mam takovy dotaz, vsechno mi valilo v pohode jak ma, najednou mi z conky vypadli TV programy. Z niceho nic, toto mi vyhodil terminal:
cud@cud-laptop:~$ conky
Conky: desktop window (c000bd) is subwindow of root window (1a5)
Conky: window type - override
Conky: drawing to created window (2800001)
Conky: drawing to double buffer
--13:01:41--  http://xoap.weather.com/weather/local/EZXX0033?dayf=6&unit=m&cc=*
           => `-'
Resolving xoap.weather.com... 65.207.183.49
Connecting to xoap.weather.com|65.207.183.49|:80... connected.
HTTP požadavek odeslán, program čeká na odpověď ... 200 OK
Délka: 5 692 (5.6K) [text/plain]

100%[====================================>] 5 692        --.--K/s             

13:01:42 (42.48 KB/s) - `-' saved [5692/5692]

--13:01:45--  http://www.tampiss.com/rss/tv_online.xml
           => `-'
Resolving www.tampiss.com... 82.208.41.52
Connecting to www.tampiss.com|82.208.41.52|:80... connected.
HTTP požadavek odeslán, program čeká na odpověď ... 200 OK
Délka: 2 091 (2.0K) [text/xml]

100%[====================================>] 2 091        --.--K/s             

13:01:45 (213.16 MB/s) - `-' saved [2091/2091]

/tmp/tv.xml:29: parser error : xmlParseEntityRef: no name
        <title>NOVA > 12:45 - 13:15 > Lenssen & spol.
                                               ^
/tmp/tv.xml:31: parser error : xmlParseEntityRef: no name
        <description>(Lenssen & Partners) Vražedné pikle. Advokát Ingo Lensse
                               ^ at /usr/lib/perl5/XML/LibXML/SAX/Parser.pm line 38
/tmp/tv.xml:29: parser error : xmlParseEntityRef: no name
        <title>NOVA > 12:45 - 13:15 > Lenssen & spol.
                                               ^
/tmp/tv.xml:31: parser error : xmlParseEntityRef: no name
        <description>(Lenssen & Partners) Vražedné pikle. Advokát Ingo Lensse
                               ^ at /usr/lib/perl5/XML/LibXML/SAX/Parser.pm line 38
/tmp/tv.xml:29: parser error : xmlParseEntityRef: no name
        <title>NOVA > 12:45 - 13:15 > Lenssen & spol.
                                               ^
/tmp/tv.xml:31: parser error : xmlParseEntityRef: no name
        <description>(Lenssen & Partners) Vražedné pikle. Advokát Ingo Lensse
                               ^ at /usr/lib/perl5/XML/LibXML/SAX/Parser.pm line 38
/tmp/tv.xml:29: parser error : xmlParseEntityRef: no name
        <title>NOVA > 12:45 - 13:15 > Lenssen & spol.
                                               ^
/tmp/tv.xml:31: parser error : xmlParseEntityRef: no name
        <description>(Lenssen & Partners) Vražedné pikle. Advokát Ingo Lensse
                               ^ at /usr/lib/perl5/XML/LibXML/SAX/Parser.pm line 38
/tmp/tv.xml:29: parser error : xmlParseEntityRef: no name
        <title>NOVA > 12:45 - 13:15 > Lenssen & spol.
                                               ^
/tmp/tv.xml:31: parser error : xmlParseEntityRef: no name
        <description>(Lenssen & Partners) Vražedné pikle. Advokát Ingo Lensse
                               ^ at /usr/lib/perl5/XML/LibXML/SAX/Parser.pm line 38
/tmp/tv.xml:29: parser error : xmlParseEntityRef: no name
        <title>NOVA > 12:45 - 13:15 > Lenssen & spol.
                                               ^
/tmp/tv.xml:31: parser error : xmlParseEntityRef: no name
        <description>(Lenssen & Partners) Vražedné pikle. Advokát Ingo Lensse
                               ^ at /usr/lib/perl5/XML/LibXML/SAX/Parser.pm line 38
/tmp/tv.xml:29: parser error : xmlParseEntityRef: no name
        <title>NOVA > 12:45 - 13:15 > Lenssen & spol.
                                               ^
/tmp/tv.xml:31: parser error : xmlParseEntityRef: no name
        <description>(Lenssen & Partners) Vražedné pikle. Advokát Ingo Lensse
                               ^ at /usr/lib/perl5/XML/LibXML/SAX/Parser.pm line 38
/tmp/tv.xml:29: parser error : xmlParseEntityRef: no name
        <title>NOVA > 12:45 - 13:15 > Lenssen & spol.
                                               ^
/tmp/tv.xml:31: parser error : xmlParseEntityRef: no name
        <description>(Lenssen & Partners) Vražedné pikle. Advokát Ingo Lensse
                               ^ at /usr/lib/perl5/XML/LibXML/SAX/Parser.pm line 38

Nevite nekdo co to znamena? co se s tim da delat

Tak to vypada ze je to jen neco docasneho, ptz uz to zase jde jak ma.

[tayllor]

zdravicko mam dotaz co mam dopist do xorg.conf ked tam ziadne modules nemam?
a este jeden dotaz
ako zuzim conky pretoze nakopol com pocasie a rozsirilo sa to na 3/4 obrazovky a kde zmenim mesto aby mi to neukazovalo pocasie v Pardubiciach?