dakujem za reakciu, prikladam obsah
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #2 for /boot/grub.
sda1: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sda2: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04.1 LTS
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda3: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Linux Mint 9 Isadora
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda4: _________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sda6: _________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda7: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: According to the info in the boot sector, sda7 starts
at sector 63.
Operating System:
Boot files/dirs:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ _____________________________________________________
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 2,048 60,637,183 60,635,136 7 HPFS/NTFS
/dev/sda2 * 60,637,184 82,120,703 21,483,520 83 Linux
/dev/sda3 82,122,752 103,606,271 21,483,520 83 Linux
/dev/sda4 103,606,335 625,153,409 521,547,075 f W95 Ext d (LBA)
/dev/sda5 103,608,320 145,016,831 41,408,512 83 Linux
/dev/sda6 145,018,818 154,079,393 9,060,576 82 Linux swap / Solaris
/dev/sda7 154,079,478 625,121,279 471,041,802 7 HPFS/NTFS
/dev/sda4 ends after the last sector of /dev/sda
blkid -c /dev/null: ____________________________________________________________
Device UUID TYPE LABEL
/dev/sda: PTTYPE="dos"
/dev/sda1 A6E03082E0305AAF ntfs
/dev/sda2 7f677904-ac13-4dbc-a2cb-50e067a58123 ext4
/dev/sda3 f6b51d0f-d08d-4bcd-b57f-59efb71b6aca ext4
/dev/sda4: PTTYPE="dos"
/dev/sda5 c4b5cff0-1e69-4c15-bd97-2ff68798afdc ext4
/dev/sda6 b331a157-d91e-488a-b9ee-b5048dc88511 swap
/dev/sda7 E884616D84613F66 ntfs Data
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
/dev/sda3 / ext4 (rw,errors=remount-ro)
/dev/sda5 /home ext4 (rw)
/dev/sda7 /media/Data fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda1 /media/Windows fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda2 /media/CNC ext4 (rw)
=========================== sda2/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="5"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd0,2)'
search --no-floppy --fs-uuid --set 7f677904-ac13-4dbc-a2cb-50e067a58123
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd0,2)'
search --no-floppy --fs-uuid --set 7f677904-ac13-4dbc-a2cb-50e067a58123
set locale_dir=($root)/boot/grub/locale
set lang=sk
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.32-122-rtai' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,2)'
search --no-floppy --fs-uuid --set 7f677904-ac13-4dbc-a2cb-50e067a58123
linux /boot/vmlinuz-2.6.32-122-rtai root=UUID=7f677904-ac13-4dbc-a2cb-50e067a58123 ro vga=792 quiet splash
initrd /boot/initrd.img-2.6.32-122-rtai
}
menuentry 'Ubuntu, with Linux 2.6.32-122-rtai (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,2)'
search --no-floppy --fs-uuid --set 7f677904-ac13-4dbc-a2cb-50e067a58123
echo 'Loading Linux 2.6.32-122-rtai ...'
linux /boot/vmlinuz-2.6.32-122-rtai root=UUID=7f677904-ac13-4dbc-a2cb-50e067a58123 ro single vga=792
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-122-rtai
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd0,2)'
search --no-floppy --fs-uuid --set 7f677904-ac13-4dbc-a2cb-50e067a58123
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd0,2)'
search --no-floppy --fs-uuid --set 7f677904-ac13-4dbc-a2cb-50e067a58123
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows 7 (loader) (on /dev/sda1)" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set a6e03082e0305aaf
chainloader +1
}
menuentry "Linux Mint 9, 2.6.32-21-generic (/dev/sda3) (on /dev/sda3)" {
insmod ext2
set root='(hd0,3)'
search --no-floppy --fs-uuid --set f6b51d0f-d08d-4bcd-b57f-59efb71b6aca
linux /boot/vmlinuz-2.6.32-21-generic root=UUID=f6b51d0f-d08d-4bcd-b57f-59efb71b6aca ro quiet splash
initrd /boot/initrd.img-2.6.32-21-generic
}
menuentry "Linux Mint 9, 2.6.32-21-generic (/dev/sda3) -- recovery mode (on /dev/sda3)" {
insmod ext2
set root='(hd0,3)'
search --no-floppy --fs-uuid --set f6b51d0f-d08d-4bcd-b57f-59efb71b6aca
linux /boot/vmlinuz-2.6.32-21-generic root=UUID=f6b51d0f-d08d-4bcd-b57f-59efb71b6aca ro single
initrd /boot/initrd.img-2.6.32-21-generic
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sda2/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda2 during installation
UUID=7f677904-ac13-4dbc-a2cb-50e067a58123 / ext4 errors=remount-ro 0 1
# /media/Data was on /dev/sda5 during installation
UUID=E884616D84613F66 /media/Data ntfs defaults,nls=utf8,umask=007,gid=46 0 0
# /media/Mint was on /dev/sda3 during installation
UUID=f6b51d0f-d08d-4bcd-b57f-59efb71b6aca /media/Mint ext4 defaults 0 2
# /media/Windows was on /dev/sda1 during installation
UUID=A6E03082E0305AAF /media/Windows ntfs defaults,nls=utf8,umask=007,gid=46 0 0
=================== sda2: Location of files loaded by Grub: ===================
33.3GB: boot/grub/core.img
35.8GB: boot/grub/grub.cfg
33.4GB: boot/initrd.img-2.6.32-122-rtai
33.3GB: boot/vmlinuz-2.6.32-122-rtai
33.4GB: initrd.img
33.3GB: vmlinuz
=========================== sda3/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd0,3)'
search --no-floppy --fs-uuid --set f6b51d0f-d08d-4bcd-b57f-59efb71b6aca
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd0,3)'
search --no-floppy --fs-uuid --set f6b51d0f-d08d-4bcd-b57f-59efb71b6aca
set locale_dir=($root)/boot/grub/locale
set lang=sk
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=4
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/06_mint_theme ###
insmod ext2
set root='(hd0,3)'
search --no-floppy --fs-uuid --set f6b51d0f-d08d-4bcd-b57f-59efb71b6aca
insmod png
if background_image /boot/grub/linuxmint.png ; then
set color_normal=white/black
set color_highlight=white/light-gray
else
set menu_color_normal=white/black
set menu_color_highlight=white/light-gray
fi
### END /etc/grub.d/06_mint_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry "Linux Mint 9, 2.6.32-21-generic (/dev/sda3)" --class linuxmint --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,3)'
search --no-floppy --fs-uuid --set f6b51d0f-d08d-4bcd-b57f-59efb71b6aca
linux /boot/vmlinuz-2.6.32-21-generic root=UUID=f6b51d0f-d08d-4bcd-b57f-59efb71b6aca ro quiet splash
initrd /boot/initrd.img-2.6.32-21-generic
}
menuentry "Linux Mint 9, 2.6.32-21-generic (/dev/sda3) -- recovery mode" --class linuxmint --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,3)'
search --no-floppy --fs-uuid --set f6b51d0f-d08d-4bcd-b57f-59efb71b6aca
echo 'Loading Linux 2.6.32-21-generic ...'
linux /boot/vmlinuz-2.6.32-21-generic root=UUID=f6b51d0f-d08d-4bcd-b57f-59efb71b6aca ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-21-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/10_lupin ###
### END /etc/grub.d/10_lupin ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd0,3)'
search --no-floppy --fs-uuid --set f6b51d0f-d08d-4bcd-b57f-59efb71b6aca
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd0,3)'
search --no-floppy --fs-uuid --set f6b51d0f-d08d-4bcd-b57f-59efb71b6aca
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows 7 (loader) (on /dev/sda1)" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set a6e03082e0305aaf
chainloader +1
}
menuentry "Ubuntu, with Linux 2.6.32-122-rtai (on /dev/sda2)" {
insmod ext2
set root='(hd0,2)'
search --no-floppy --fs-uuid --set 7f677904-ac13-4dbc-a2cb-50e067a58123
linux /boot/vmlinuz-2.6.32-122-rtai root=UUID=7f677904-ac13-4dbc-a2cb-50e067a58123 ro vga=792 quiet splash
initrd /boot/initrd.img-2.6.32-122-rtai
}
menuentry "Ubuntu, with Linux 2.6.32-122-rtai (recovery mode) (on /dev/sda2)" {
insmod ext2
set root='(hd0,2)'
search --no-floppy --fs-uuid --set 7f677904-ac13-4dbc-a2cb-50e067a58123
linux /boot/vmlinuz-2.6.32-122-rtai root=UUID=7f677904-ac13-4dbc-a2cb-50e067a58123 ro single vga=792
initrd /boot/initrd.img-2.6.32-122-rtai
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sda3/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
#Entry for /dev/sda4 :
UUID=f6b51d0f-d08d-4bcd-b57f-59efb71b6aca / ext4 errors=remount-ro 0 1
#Entry for /dev/sda7 :
UUID=c4b5cff0-1e69-4c15-bd97-2ff68798afdc /home ext4 defaults 0 2
#Entry for /dev/sda5 :
UUID=E884616D84613F66 /media/Data ntfs-3g defaults,nosuid,nodev,locale=sk_SK.utf8 0 0
#Entry for /dev/sda1 :
/dev/sda1 /media/Windows ntfs-3g defaults,nosuid,nodev,locale=sk_SK.utf8 0 0
#Entry for /dev/sda2 :
/dev/sda2 /media/CNC ext4 defaults 0 2
#Entry for /dev/sda6 :
UUID=b331a157-d91e-488a-b9ee-b5048dc88511 none swap sw 0 0
=================== sda3: Location of files loaded by Grub: ===================
44.3GB: boot/grub/core.img
47.7GB: boot/grub/grub.cfg
52.6GB: boot/initrd.img-2.6.32-21-generic
45.5GB: boot/vmlinuz-2.6.32-21-generic
52.6GB: initrd.img
45.5GB: vmlinuz
tie konzolove nastroje disky vidia, ale gparted a dokonca kazda linux instalacka tie disky pri instalacii nevidi