dmesg - výpis:
[ 9766.273723] em2882/3 #0: No sensor detected
[ 9766.273727] em2882/3 #0: Your board has no unique USB ID.
[ 9766.273730] em2882/3 #0: A hint were successfully done, based on eeprom hash.
[ 9766.273732] em2882/3 #0: This method is not 100% failproof.
[ 9766.273734] em2882/3 #0: If the board were missdetected, please email this log to:
[ 9766.273736] em2882/3 #0: V4L Mailing List <linux-media@vger.kernel.org>
[ 9766.273738] em2882/3 #0: Board detected as Pinnacle Hybrid Pro
[ 9766.404049] em2882/3 #0: Identified as Pinnacle Hybrid Pro (card=53)
[ 9766.404056] em2882/3 #0: analog set to isoc mode.
[ 9766.404059] em2882/3 #0: dvb set to isoc mode.
[ 9766.404254] em2882/3 #0: Registering V4L2 extension
[ 9766.508356] tvp5150 6-005c: chip found @ 0xb8 (em2882/3 #0)
[ 9766.508360] tvp5150 6-005c: tvp5150am1 detected.
[ 9766.518439] tuner 6-0061: Tuner -1 found with type(s) Radio TV.
[ 9766.565565] xc2028 6-0061: creating new instance
[ 9766.565569] xc2028 6-0061: type set to XCeive xc2028/xc3028 tuner
[ 9766.565730] em2882/3 #0: Config register raw data: 0x58
[ 9766.566481] em2882/3 #0: AC97 vendor ID = 0xffffffff
[ 9766.566853] em2882/3 #0: AC97 features = 0x6a90
[ 9766.566855] em2882/3 #0: Empia 202 AC97 audio processor detected
[ 9766.580137] usb 1-3: Direct firmware load for xc3028-v27.fw failed with error -2
[ 9766.580145] xc2028 6-0061: Could not load firmware xc3028-v27.fw.
[ 9766.869583] em2882/3 #0: V4L2 video device registered as video1
[ 9766.869588] em2882/3 #0: V4L2 VBI device registered as vbi0
[ 9766.869592] em2882/3 #0: V4L2 extension successfully initialized
[ 9766.869595] em2882/3 #0: Binding DVB extension
[ 9767.008746] xc2028 6-0061: attaching existing instance
[ 9767.008751] xc2028 6-0061: type set to XCeive xc2028/xc3028 tuner
[ 9767.008756] em2882/3 #0: em2882/3 #0/2: xc3028 attached
[ 9767.008759] DVB: registering new adapter (em2882/3 #0)
[ 9767.008765] usb 1-3: DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)...
[ 9767.009257] em2882/3 #0: DVB extension successfully initialized
Nevím, kde a jak získat to firmware xc3028-v27.fw.