Prosíme přihlašte se nebo zaregistrujte.

Přihlašte se svým uživatelským jménem a heslem.

Novinky:

Autor Téma: PC po startu zamrzne  (Přečteno 1436 krát)

macu

  • Závislák
  • ****
  • Příspěvků: 1138
  • Karma: +103/-3
    • Zobrazit profil
PC po startu zamrzne
« kdy: 30 Červenec 2008, 17:56:42 »
po zapnutí pc a přihlášení do Ubuntu 8.04 (64bit) mi PC zamrzne a musím dát tvrdý restart (občas se hýbe myška, ale přepnout do ostatních terminálů nelze). Pokud je pc už restartovaný tak druhý start systému už je OK a můžu se systémem normálně pracovat. Tato chyba se objevuje už cca 2 - 3 dny (zřejmě po nějaké aktualizaci). Nemá někdo zkušenosti? Popř. jaké výpisy Vám mám zaslat na kontrolu?
PC: Intel i5-6600K, 16 GB DDR4 RAM, Intel 530HD, ASUS Z170 Pro Gaming, , 2TB Toshiba HDD Sata III DT01ACA200, Ubuntu 19.04 64bit, Gnome Shell 3.32
Ntb: Toshiba L850-U12 - Intel i3 , 8 GB DDR3 RAM, Ubuntu 19.04 64bit, Gnome Shell 3.32

kalfar

  • Člen
  • **
  • Příspěvků: 372
  • Karma: +18/-5
    • Zobrazit profil
Re: PC po startu zamrzne
« Odpověď #1 kdy: 01 Srpen 2008, 10:16:47 »
Případně vyzkoušet 32bit verzi. 64bit verze má smysl jen u paměti >= 4GB a nebo u náročných aplikací optimalizovaných pro 64bit. Jinak je to spíš přidělávání si problémů.
Ubuntu jsem nainstaloval v úterý,ve středu jsem si přečetl tyhle stránky,čtvrtek byl dnem doinstalací programů a dnes jsmem se utvrdil,že tu Vistu jsem kupoval draze a zbytečně. >:(

macu

  • Závislák
  • ****
  • Příspěvků: 1138
  • Karma: +103/-3
    • Zobrazit profil
Re: PC po startu zamrzne
« Odpověď #2 kdy: 01 Srpen 2008, 17:05:39 »
jedná se vždy jen o první spuštění, pak už jede v pohodě...fakt nechápu

Kód: [Vybrat]
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.24-19-generic (buildd@king) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Fri Jul 11 21:01:46 UTC 2008 (Ubuntu 2.6.24-19.36-generic)
[    0.000000] Command line: root=UUID=860176af-4c27-4a08-a647-9f344e56a0ee ro quiet splash
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
[    0.000000]  BIOS-e820: 000000003ffb0000 - 000000003ffbe000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003ffbe000 - 000000003ffe0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003ffe0000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 262064) 1 entries of 3200 used
[    0.000000] end_pfn_map = 1048576
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP signature @ 0xFFFF8100000FA960 checksum 0
[    0.000000] ACPI: RSDP 000FA960, 0014 (r0 ACPIAM)
[    0.000000] ACPI: RSDT 3FFB0000, 0040 (r1 NEC              1000709 MSFT       97)
[    0.000000] ACPI: FACP 3FFB0200, 0084 (r2 A_M_I_ OEMFACP   1000709 MSFT       97)
[    0.000000] ACPI: DSDT 3FFB05C0, 4E3F (r1  A0498 A0498000        0 INTL 20060113)
[    0.000000] ACPI: FACS 3FFBE000, 0040
[    0.000000] ACPI: APIC 3FFB0390, 0068 (r1 A_M_I_ OEMAPIC   1000709 MSFT       97)
[    0.000000] ACPI: MCFG 3FFB0400, 003C (r1 A_M_I_ OEMMCFG   1000709 MSFT       97)
[    0.000000] ACPI: SLIC 3FFB0440, 0176 (r1 NEC              1000709 MSFT       97)
[    0.000000] ACPI: OEMB 3FFBE040, 0060 (r1 A_M_I_ AMI_OEM   1000709 MSFT       97)
[    0.000000] ACPI: HPET 3FFB5400, 0038 (r1 A_M_I_ OEMHPET   1000709 MSFT       97)
[    0.000000] ACPI: SSDT 3FFB5440, 01C4 (r1 A_M_I_ POWERNOW        1 AMD         1)
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] CPU has 2 num_cores
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000003ffb0000
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 262064) 1 entries of 3200 used
[    0.000000] Bootmem setup node 0 0000000000000000-000000003ffb0000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  1048576
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0:        0 ->      159
[    0.000000]     0:      256 ->   262064
[    0.000000] On node 0 totalpages: 261967
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 1219 pages reserved
[    0.000000]   DMA zone: 2724 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 3526 pages used for memmap
[    0.000000]   DMA32 zone: 254442 pages, LIFO batch:31
[    0.000000]   Normal zone: 0 pages used for memmap
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] Processor #1
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
[    0.000000] IOAPIC[1]: apic_id 3, address 0xfecc0000, GSI 24-47
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Setting APIC routing to flat
[    0.000000] ACPI: HPET id: 0x11068201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000
[    0.000000] swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PERCPU: Allocating 34656 bytes of per cpu data
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 257166
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: root=UUID=860176af-4c27-4a08-a647-9f344e56a0ee ro quiet splash
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] hpet clockevent registered
[    0.000000] TSC calibrated against HPET
[   12.891358] Marking TSC unstable due to TSCs unsynchronized
[   12.891360] time.c: Detected 1999.771 MHz processor.
[   12.892593] Console: colour VGA+ 80x25
[   12.892596] console [tty0] enabled
[   12.892613] Checking aperture...
[   12.892615] CPU 0: aperture @ c12000000 size 32 MB
[   12.892617] Aperture too small (32 MB)
[   12.900039] No AGP bridge found
[   12.911766] Memory: 1020496k/1048256k available (2489k kernel code, 27372k reserved, 1318k data, 320k init)
[   12.911806] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[   12.989329] Calibrating delay using timer specific routine.. 4001.70 BogoMIPS (lpj=8003404)
[   12.989363] Security Framework initialized
[   12.989371] SELinux:  Disabled at boot.
[   12.989385] AppArmor: AppArmor initialized
[   12.989388] Failure registering capabilities with primary security module.
[   12.989484] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[   12.990254] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[   12.990620] Mount-cache hash table entries: 256
[   12.990760] Initializing cgroup subsys ns
[   12.990764] Initializing cgroup subsys cpuacct
[   12.990776] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   12.990778] CPU: L2 Cache: 512K (64 bytes/line)
[   12.990781] CPU 0/0 -> Node 0
[   12.990783] CPU: Physical Processor ID: 0
[   12.990784] CPU: Processor Core ID: 0
[   12.990810] SMP alternatives: switching to UP code
[   12.991487] Early unpacking initramfs... done
[   13.312948] ACPI: Core revision 20070126
[   13.313007] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   13.356087] Using local APIC timer interrupts.
[   13.406090] APIC timer calibration result 12498566
[   13.406092] Detected 12.498 MHz APIC timer.
[   13.406192] SMP alternatives: switching to SMP code
[   13.406752] Booting processor 1/2 APIC 0x1
[   13.416762] Initializing CPU#1
[   13.494029] Calibrating delay using timer specific routine.. 3999.58 BogoMIPS (lpj=7999179)
[   13.494035] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   13.494037] CPU: L2 Cache: 512K (64 bytes/line)
[   13.494039] CPU 1/1 -> Node 0
[   13.494041] CPU: Physical Processor ID: 0
[   13.494042] CPU: Processor Core ID: 1
[   13.494125] AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
[   13.494225] Brought up 2 CPUs
[   13.494316] CPU0 attaching sched-domain:
[   13.494319]  domain 0: span 03
[   13.494320]   groups: 01 02
[   13.494323]   domain 1: span 03
[   13.494324]    groups: 03
[   13.494326] CPU1 attaching sched-domain:
[   13.494328]  domain 0: span 03
[   13.494329]   groups: 02 01
[   13.494331]   domain 1: span 03
[   13.494333]    groups: 03
[   13.494571] net_namespace: 120 bytes
[   13.494993] Time: 16:57:24  Date: 08/01/08
[   13.495028] NET: Registered protocol family 16
[   13.495218] ACPI: bus type pci registered
[   13.495290] PCI: Using configuration type 1
[   13.497769] ACPI: EC: Look up EC in DSDT
[   13.503354] ACPI: Interpreter enabled
[   13.503356] ACPI: (supports S0 S1 S3 S4 S5)
[   13.503372] ACPI: Using IOAPIC for interrupt routing
[   13.503614] Error attaching device data
[   13.503619] Error attaching device data
[   13.512512] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   13.514299] PCI: Transparent bridge - 0000:00:13.1
[   13.514342] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   13.514505] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[   13.514590] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
[   13.514675] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT]
[   13.514760] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP1._PRT]
[   13.514844] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP2._PRT]
[   13.514932] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP3._PRT]
[   13.515029] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[   13.515117] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[   13.533839] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[   13.533955] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[   13.534072] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[   13.534207] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[   13.534318] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   13.534430] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   13.534541] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   13.534654] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[   13.534780] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  FF, should be F2 [20070126]
[   13.534788] Linux Plug and Play Support v0.97 (c) Adam Belay
[   13.534815] pnp: PnP ACPI init
[   13.534823] ACPI: bus type pnp registered
[   13.540269] pnp: PnP ACPI: found 17 devices
[   13.540272] ACPI: ACPI bus type pnp unregistered
[   13.540507] PCI: Using ACPI for IRQ routing
[   13.540510] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   13.550132] NET: Registered protocol family 8
[   13.550134] NET: Registered protocol family 20
[   13.550222] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[   13.550226] hpet0: 3 32-bit timers, 14318180 Hz
[   13.551281] AppArmor: AppArmor Filesystem Enabled
[   13.554082] Time: hpet clocksource has been installed.
[   13.554094] Switched to high resolution mode on CPU 0
[   13.554141] Switched to high resolution mode on CPU 1
[   13.562088] system 00:06: ioport range 0xc00-0xc0f has been reserved
[   13.562092] system 00:06: ioport range 0xd00-0xd0f has been reserved
[   13.562095] system 00:06: ioport range 0xa20-0xa2f has been reserved
[   13.562098] system 00:06: ioport range 0xa30-0xa3f has been reserved
[   13.562108] system 00:08: ioport range 0x3e0-0x3e7 has been reserved
[   13.562111] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[   13.562114] system 00:08: ioport range 0x800-0x87f has been reserved
[   13.562117] system 00:08: ioport range 0x400-0x41f has been reserved
[   13.562125] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
[   13.562128] system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
[   13.562136] system 00:0f: iomem range 0xe0000000-0xefffffff has been reserved
[   13.562143] system 00:10: iomem range 0x0-0x9ffff could not be reserved
[   13.562146] system 00:10: iomem range 0xc0000-0xcffff has been reserved
[   13.562149] system 00:10: iomem range 0xe0000-0xfffff could not be reserved
[   13.562152] system 00:10: iomem range 0x100000-0x3fffffff could not be reserved
[   13.562155] system 00:10: iomem range 0xff380000-0xffffffff could not be reserved
[   13.562554] PCI: Bridge: 0000:00:01.0
[   13.562556]   IO window: disabled.
[   13.562560]   MEM window: disabled.
[   13.562563]   PREFETCH window: disabled.
[   13.562567] PCI: Bridge: 0000:00:02.0
[   13.562569]   IO window: d000-dfff
[   13.562573]   MEM window: fbe00000-fbefffff
[   13.562576]   PREFETCH window: d0000000-dfffffff
[   13.562580] PCI: Bridge: 0000:00:03.0
[   13.562581]   IO window: disabled.
[   13.562585]   MEM window: disabled.
[   13.562588]   PREFETCH window: faf00000-faffffff
[   13.562592] PCI: Bridge: 0000:00:03.1
[   13.562593]   IO window: disabled.
[   13.562597]   MEM window: disabled.
[   13.562600]   PREFETCH window: fae00000-faefffff
[   13.562605] PCI: Bridge: 0000:00:03.2
[   13.562606]   IO window: disabled.
[   13.562610]   MEM window: fbf00000-fbffffff
[   13.562613]   PREFETCH window: disabled.
[   13.562617] PCI: Bridge: 0000:00:03.3
[   13.562618]   IO window: disabled.
[   13.562622]   MEM window: disabled.
[   13.562625]   PREFETCH window: fad00000-fadfffff
[   13.562630] PCI: Bridge: 0000:00:13.0
[   13.562631]   IO window: disabled.
[   13.562634]   MEM window: disabled.
[   13.562637]   PREFETCH window: disabled.
[   13.562641] PCI: Bridge: 0000:00:13.1
[   13.562643]   IO window: e000-efff
[   13.562646]   MEM window: disabled.
[   13.562649]   PREFETCH window: disabled.
[   13.562669] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   13.562684] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 27
[   13.562689] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   13.562701] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 31
[   13.562706] PCI: Setting latency timer of device 0000:00:03.0 to 64
[   13.562719] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 35 (level, low) -> IRQ 35
[   13.562723] PCI: Setting latency timer of device 0000:00:03.1 to 64
[   13.562736] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 39 (level, low) -> IRQ 39
[   13.562741] PCI: Setting latency timer of device 0000:00:03.2 to 64
[   13.562754] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 43 (level, low) -> IRQ 43
[   13.562758] PCI: Setting latency timer of device 0000:00:03.3 to 64
[   13.562768] PCI: Setting latency timer of device 0000:00:13.0 to 64
[   13.562777] PCI: Setting latency timer of device 0000:00:13.1 to 64
[   13.562837] NET: Registered protocol family 2
[   13.598137] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[   13.598627] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[   13.600238] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   13.600997] TCP: Hash tables configured (established 131072 bind 65536)
[   13.601001] TCP reno registered
[   13.610195] checking if image is initramfs... it is
[   14.260885] Freeing initrd memory: 7981k freed
[   14.267470] audit: initializing netlink socket (disabled)
[   14.267484] audit(1217609845.332:1): initialized
[   14.269405] VFS: Disk quotas dquot_6.5.1
[   14.269479] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[   14.269609] io scheduler noop registered
[   14.269611] io scheduler anticipatory registered
[   14.269613] io scheduler deadline registered
[   14.269707] io scheduler cfq registered (default)
[   14.269713] PCI: MSI quirk detected. MSI deactivated.
[   14.269724] PCI: VIA PCI bridge detected. Disabling DAC.
[   14.270203] Boot video device is 0000:02:00.0
[   14.270392] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   14.270422] assign_interrupt_mode Found MSI capability
[   14.270425] Allocate Port Service[0000:00:02.0:pcie00]
[   14.270460] Allocate Port Service[0000:00:02.0:pcie02]
[   14.270527] PCI: Setting latency timer of device 0000:00:03.0 to 64
[   14.270563] assign_interrupt_mode Found MSI capability
[   14.270565] Allocate Port Service[0000:00:03.0:pcie00]
[   14.270608] Allocate Port Service[0000:00:03.0:pcie02]
[   14.270681] PCI: Setting latency timer of device 0000:00:03.1 to 64
[   14.270717] assign_interrupt_mode Found MSI capability
[   14.270719] Allocate Port Service[0000:00:03.1:pcie00]
[   14.270746] Allocate Port Service[0000:00:03.1:pcie02]
[   14.270820] PCI: Setting latency timer of device 0000:00:03.2 to 64
[   14.270855] assign_interrupt_mode Found MSI capability
[   14.270857] Allocate Port Service[0000:00:03.2:pcie00]
[   14.270889] Allocate Port Service[0000:00:03.2:pcie02]
[   14.270966] PCI: Setting latency timer of device 0000:00:03.3 to 64
[   14.271001] assign_interrupt_mode Found MSI capability
[   14.271003] Allocate Port Service[0000:00:03.3:pcie00]
[   14.271032] Allocate Port Service[0000:00:03.3:pcie02]
[   14.297311] Real Time Clock Driver v1.12ac
[   14.297544] hpet_resources: 0xfed00000 is busy
[   14.297578] Linux agpgart interface v0.102
[   14.297581] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   14.297704] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   14.298631] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   14.299344] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   14.299411] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   14.299513] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[   14.299792] serio: i8042 KBD port at 0x60,0x64 irq 1
[   14.299801] serio: i8042 AUX port at 0x60,0x64 irq 12
[   14.314942] mice: PS/2 mouse device common for all mice
[   14.314988] cpuidle: using governor ladder
[   14.314990] cpuidle: using governor menu
[   14.315124] NET: Registered protocol family 1
[   14.315228] registered taskstats version 1
[   14.315350]   Magic number: 4:226:994
[   14.315358]   hash matches device ttyd7
[   14.315366]   hash matches device ttyaa
[   14.315475] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[   14.315478] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   14.315480] EDD information not available.
[   14.315491] Freeing unused kernel memory: 320k freed
[   14.333201] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   15.553368] fuse init (API version 7.9)
[   15.571256] ACPI: Processor [P001] (supports 16 throttling states)
[   15.936304] SCSI subsystem initialized
[   15.964054] usbcore: registered new interface driver usbfs
[   15.964077] usbcore: registered new interface driver hub
[   15.964092] libata version 3.00 loaded.
[   15.965477] usbcore: registered new device driver usb
[   15.965550] sata_via 0000:00:0f.0: version 2.3
[   15.965580] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 21
[   15.965619] sata_via 0000:00:0f.0: routed to hard irq line 10
[   15.967084] scsi0 : sata_via
[   15.968082] scsi1 : sata_via
[   15.969754] ata1: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 21
[   15.969757] ata2: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 21
[   15.969850] USB Universal Host Controller Interface driver v3.0
[   16.047634] Floppy drive(s): fd0 is 1.44M
[   16.070513] FDC 0 is a post-1991 82077
[   16.173629] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   16.348256] ata1.00: ATA-8: WDC WD3200AAKS-00VYA0, 12.01B02, max UDMA/133
[   16.348260] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   16.361897] ata1.00: configured for UDMA/133
[   16.565612] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[   16.576476] scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200AAKS-0 12.0 PQ: 0 ANSI: 5
[   16.576506] pata_via 0000:00:0f.1: version 0.3.3
[   16.577167] scsi2 : pata_via
[   16.577234] scsi3 : pata_via
[   16.578974] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[   16.578977] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[   16.909896] ata3.01: ATAPI: TOSHIBA DVD-ROM SD-M1912, TM00, max UDMA/33
[   17.074718] ata3.01: configured for UDMA/33
[   17.393674] ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-H10N, JL10, max UDMA/33
[   17.566516] ata4.00: configured for UDMA/33
[   17.567036] scsi 2:0:1:0: CD-ROM            TOSHIBA  DVD-ROM SD-M1912 TM00 PQ: 0 ANSI: 5
[   17.570445] scsi 3:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-H10N  JL10 PQ: 0 ANSI: 5
[   17.571611] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21
[   17.571796] ehci_hcd 0000:00:10.4: EHCI Host Controller
[   17.572082] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[   17.572124] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfbdffc00
[   17.582290] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   17.582409] usb usb1: configuration #1 chosen from 1 choice
[   17.582431] hub 1-0:1.0: USB hub found
[   17.582437] hub 1-0:1.0: 8 ports detected
[   17.685513] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 20
[   17.685527] uhci_hcd 0000:00:10.0: UHCI Host Controller
[   17.685557] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[   17.685584] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000b480
[   17.685688] usb usb2: configuration #1 chosen from 1 choice
[   17.685710] hub 2-0:1.0: USB hub found
[   17.685715] hub 2-0:1.0: 2 ports detected
[   17.789380] ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 22 (level, low) -> IRQ 22
[   17.789393] uhci_hcd 0000:00:10.1: UHCI Host Controller
[   17.789419] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[   17.789447] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000b800
[   17.789551] usb usb3: configuration #1 chosen from 1 choice
[   17.789576] hub 3-0:1.0: USB hub found
[   17.789581] hub 3-0:1.0: 2 ports detected
[   17.893316] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 21
[   17.893326] uhci_hcd 0000:00:10.2: UHCI Host Controller
[   17.893366] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[   17.893386] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000b880
[   17.893489] usb usb4: configuration #1 chosen from 1 choice
[   17.893510] hub 4-0:1.0: USB hub found
[   17.893516] hub 4-0:1.0: 2 ports detected
[   17.997304] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 23
[   17.997315] uhci_hcd 0000:00:10.3: UHCI Host Controller
[   17.997336] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[   17.997361] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000bc00
[   17.997460] usb usb5: configuration #1 chosen from 1 choice
[   17.997479] hub 5-0:1.0: USB hub found
[   17.997484] hub 5-0:1.0: 2 ports detected
[   18.118339] Driver 'sd' needs updating - please use bus_type methods
[   18.119210] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[   18.119222] sd 0:0:0:0: [sda] Write Protect is off
[   18.119225] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   18.119239] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   18.119294] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[   18.119302] sd 0:0:0:0: [sda] Write Protect is off
[   18.119305] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   18.119316] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   18.119320]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
[   18.128206]  sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
[   18.187060] sd 0:0:0:0: [sda] Attached SCSI disk
[   18.191891] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   18.191948] sr 2:0:1:0: Attached scsi generic sg1 type 5
[   18.191965] scsi 3:0:0:0: Attached scsi generic sg2 type 5
[   18.194194] sr0: scsi3-mmc drive: 1x/48x cd/rw xa/form2 cdda tray
[   18.194200] Uniform CD-ROM driver Revision: 3.20
[   18.194271] sr 2:0:1:0: Attached scsi CD-ROM sr0
[   18.212363] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[   18.212422] sr 3:0:0:0: Attached scsi CD-ROM sr1
[   18.549221] usb 3-2: new full speed USB device using uhci_hcd and address 2
[   18.695205] Attempting manual resume
[   18.695209] swsusp: Resume From Partition 8:8
[   18.695211] PM: Checking swsusp image.
[   18.695429] PM: Resume from disk failed.
[   18.706270] EXT3-fs: INFO: recovery required on readonly filesystem.
[   18.706275] EXT3-fs: write access will be enabled during recovery.
[   18.779470] usb 3-2: configuration #1 chosen from 1 choice
[   18.816346] kjournald starting.  Commit interval 5 seconds
[   18.816362] EXT3-fs: sda7: orphan cleanup on readonly fs
[   18.816369] ext3_orphan_cleanup: deleting unreferenced inode 824220
[   18.816412] ext3_orphan_cleanup: deleting unreferenced inode 824181
[   18.816419] ext3_orphan_cleanup: deleting unreferenced inode 824168
[   18.816426] ext3_orphan_cleanup: deleting unreferenced inode 824167
[   18.816432] ext3_orphan_cleanup: deleting unreferenced inode 824166
[   18.816438] ext3_orphan_cleanup: deleting unreferenced inode 824165
[   18.816444] ext3_orphan_cleanup: deleting unreferenced inode 824164
[   18.816450] EXT3-fs: sda7: 7 orphan inodes deleted
[   18.816451] EXT3-fs: recovery complete.
[   18.818148] EXT3-fs: mounted filesystem with ordered data mode.
[   25.312933] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   25.396956] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   25.624954] input: PC Speaker as /devices/platform/pcspkr/input/input2
[   25.681855] input: Power Button (FF) as /devices/virtual/input/input3
[   25.704736] ACPI: Power Button (FF) [PWRF]
[   25.704859] input: Sleep Button (CM) as /devices/virtual/input/input4
[   25.728751] ACPI: Sleep Button (CM) [SLPB]
[   25.728868] input: Power Button (CM) as /devices/virtual/input/input5
[   25.760719] ACPI: Power Button (CM) [PWRB]
[   26.165860] parport_pc 00:05: reported by Plug and Play ACPI
[   26.165887] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[   26.480956] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 36 (level, low) -> IRQ 36
[   26.480969] PCI: Setting latency timer of device 0000:04:00.0 to 64
[   26.481142] atl1 0000:04:00.0: version 2.0.7
[   26.568211] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   26.611731] [fglrx] Maximum main memory to use for locked dma buffers: 922 MBytes.
[   26.611763] [fglrx] ASYNCIO init succeed!
[   26.612017] [fglrx] PAT is enabled successfully!
[   26.612928] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0
[   26.946284] Linux video capture interface: v2.00
[   27.025307] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found. (PAC207)
[   27.030356] usbcore: registered new interface driver gspca
[   27.030360] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: gspca driver 01.00.20 registered
[   27.159559] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6
[   27.189861] ACPI: PCI Interrupt 0000:07:09.0[A] -> GSI 19 (level, low) -> IRQ 19
[   27.189885] snd-ca0106: Model 100a Rev 00000000 Serial 100a1102
[   29.614439] lp0: using parport0 (interrupt-driven).
[   29.666233] it87: Found IT8712F chip at 0xd00, revision 8
[   29.666241] it87: in3 is VCC (+5V)
[   29.753850] Adding 2104472k swap on /dev/sda8.  Priority:-1 extents:1 across:2104472k
[   30.307998] EXT3 FS on sda7, internal journal
[   30.400365] device-mapper: uevent: version 1.0.3
[   30.400399] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
[   31.289638] kjournald starting.  Commit interval 5 seconds
[   31.294989] EXT3 FS on sda9, internal journal
[   31.294996] EXT3-fs: mounted filesystem with ordered data mode.
[   32.133863] ip_tables: (C) 2000-2006 Netfilter Core Team
[   32.604125] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (2 cpu cores) (version 2.20.00)
[   32.604158] powernow-k8:    0 : fid 0xc (2000 MHz), vid 0xe
[   32.604162] powernow-k8:    1 : fid 0xa (1800 MHz), vid 0x10
[   32.604164] powernow-k8:    2 : fid 0x2 (1000 MHz), vid 0x12
[   32.711296] No dock devices found.
[   35.713380] ppdev: user-space parallel port driver
[   35.839081] audit(1217602667.323:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5583 profile="/usr/sbin/cupsd" namespace="default"
[   36.291813] Clocksource tsc unstable (delta = -142016383 ns)
[   36.652770] NET: Registered protocol family 10
[   36.652982] lo: Disabled Privacy Extensions
[   37.796067] atl1 0000:04:00.0: Unable to enable MSI: -22
[   37.796132] atl1 0000:04:00.0: eth0 link is up 100 Mbps full duplex
[   37.851618] Bluetooth: Core ver 2.11
[   37.852042] NET: Registered protocol family 31
[   37.852047] Bluetooth: HCI device and connection manager initialized
[   37.852052] Bluetooth: HCI socket layer initialized
[   37.872397] Bluetooth: L2CAP ver 2.9
[   37.872402] Bluetooth: L2CAP socket layer initialized
[   37.925561] Bluetooth: RFCOMM socket layer initialized
[   37.925582] Bluetooth: RFCOMM TTY layer initialized
[   37.925584] Bluetooth: RFCOMM ver 1.8
[   38.903341] NET: Registered protocol family 17
[   39.481150] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 24 (level, low) -> IRQ 24
[   40.290295] [fglrx] Reserve Block - 0 offset =  0Xfffb000 length = 0X5000
[   40.290303] [fglrx] Reserve Block - 1 offset =  0X0 length = 0X1000000
[   40.290306] [fglrx] Reserve Block - 2 offset =  0Xffbb000 length = 0X40000
[   40.409181] [fglrx] interrupt source 10000000 successfully enabled
[   40.409189] [fglrx] enable ID = 0x00000008
[   40.409200] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000
[   47.591644] eth0: no IPv6 routers present
[   50.408389] atkbd.c: Unknown key released (translated set 2, code 0xe4 on isa0060/serio0).
[   50.408395] atkbd.c: Use 'setkeycodes e064 <keycode>' to make it known.
[   85.188844] atkbd.c: Unknown key released (translated set 2, code 0xe4 on isa0060/serio0).
[   85.188850] atkbd.c: Use 'setkeycodes e064 <keycode>' to make it known.
PC: Intel i5-6600K, 16 GB DDR4 RAM, Intel 530HD, ASUS Z170 Pro Gaming, , 2TB Toshiba HDD Sata III DT01ACA200, Ubuntu 19.04 64bit, Gnome Shell 3.32
Ntb: Toshiba L850-U12 - Intel i3 , 8 GB DDR3 RAM, Ubuntu 19.04 64bit, Gnome Shell 3.32

kalfar

  • Člen
  • **
  • Příspěvků: 372
  • Karma: +18/-5
    • Zobrazit profil
Re: PC po startu zamrzne
« Odpověď #3 kdy: 02 Srpen 2008, 10:53:48 »
Napadl mě takový výstřel do tmy. Zkusil bych aktualizovat BIOS. Mě se kupodivu BIOS chová jinak po startu a po restartu  ??? Naštěstí to ovlivňuje jen chlazení. Možná že máš podobný problém, akorát závažnější.
Ubuntu jsem nainstaloval v úterý,ve středu jsem si přečetl tyhle stránky,čtvrtek byl dnem doinstalací programů a dnes jsmem se utvrdil,že tu Vistu jsem kupoval draze a zbytečně. >:(

dejv111

  • Návštěvník
  • *
  • Příspěvků: 1
  • Karma: +0/-0
    • Zobrazit profil
Re:PC po startu zamrzne
« Odpověď #4 kdy: 25 Červen 2019, 20:24:07 »
Od určité doby se mi děje to stejné u stařičkého notebooku Asus X51R.  Všechno v pohodě a najednou se zamrzá u hlášky při inicializaci zvukové karty. Ta jinak funguje normálně. Po restartu systém najede v pohodě. Taky se přikláním k nějaké chybě v aktualizaci...

Gmisiycs

  • Člen
  • **
  • Příspěvků: 262
  • Karma: +15/-0
    • Zobrazit profil
    • Helltracker
Re:PC po startu zamrzne
« Odpověď #5 kdy: 26 Červen 2019, 21:09:57 »
Nedávno jsem řešil zcela ujetou hlášku po zapnutí  NTB. Už si ji nepamatuji. Po zapnutí NTB se objevil text a vyřešil to restart. Pak se ještě několik týdnů náhodně stávalo totéž a pak to přestalo.
Je mi líto, nemám už v historii prohlížeče linky.  Vzpomínám, že na StackOwerflow byl opravný skript, který mne zbavil problémů.

Připadá mi to jako stejný problém a doufám, že můj příspěvek někomu pomůže při gůglení a podělí se s námi o výsledek.
R.I.P. Trusty Tahr - nezapomenu...