Prosíme přihlašte se nebo zaregistrujte.

Přihlašte se svým uživatelským jménem a heslem.

Autor Téma: Kamera Eyetoy a Skype [vyřešeno]  (Přečteno 2212 krát)

play3man

  • Člen
  • **
  • Příspěvků: 287
  • Karma: +10/-3
    • Zobrazit profil
Kamera Eyetoy a Skype [vyřešeno]
« kdy: 03 Září 2009, 21:21:34 »
Dobry den. Potrebujem rychlu radu ako rozbehat tuto kamerku pod Skype. Nainstaloval som si tento ovladac: ov51x-jpeg-1.5.9. Ale nepomohlo to. A ani pridanie tohoto: options ov51x-jpeg forceblock=1 do options ako je v tomto navode:http://wiki.ubuntu.cz/Webkamery/Ov51x-jpeg. Ale predsa sa my to nejak podarylo rozbehat. A v skype my ten obraz z kamerky pekne isiel no teraz je tam len farebny "sum" Myslim ze hlavna pricina ze to islo bolo nainstalovat toto: ov51x-jpeg-1.5.9 priamo zo synapticu. Cez program XawTV som sa hral z nadstaveniamy a nakoniec my znicoho nic vipadol obraz a od vtedy sa my to uz nepodarylo rozbehat :(. Ide to len cez XawTV ale cez Skype nie. Ale v XawTV je v kazdom druhom "riadku" pruh. Ked dam full screen tak uz su tam neni. Ale ked kamerka isla aj v Skype tak pruhy neboly ani v malom okienku. Dakujem za rychlu odpoved. Lebo kamerku velmy surne potrebujem :(. Dakujem za kazdy napad :)
« Poslední změna: 18 Září 2009, 18:35:38 od kiklhorn »
Stovky článků o hrách pro konzole značek Sony PlayStation, Microsoft Xbox a Nintendo. Sortiment se každým dnem rozšiřuje! Konzolista.cz
https://www.facebook.com/konzolista.cz
http://konzolista.tiscali.cz/

arrange

  • Závislák
  • ****
  • Příspěvků: 4031
  • Karma: +473/-15
  • "jdu s hlavou vztyčenou..."
    • Zobrazit profil
Re: Kamera Eyetoy a Skype
« Odpověď #1 kdy: 04 Září 2009, 08:44:05 »
Se zapojenou kamerou tu dej výstup z
Kód: [Vybrat]
lsusb
uname -a
skype --version
(více informací ke kameře atd.), případně připoj část dmesg týkající se té kamery.

Co jsem zjistil, vývojář ovladače projekt opustil, ale možná by Ti mohl jít gspca ovladač.
http://www.openstreetmap.org - mapy celého světa "wiki style"

play3man

  • Člen
  • **
  • Příspěvků: 287
  • Karma: +10/-3
    • Zobrazit profil
Re: Kamera Eyetoy a Skype
« Odpověď #2 kdy: 04 Září 2009, 12:58:35 »
Tak tu su tie vypisy:

Kód: [Vybrat]
lsusb
Bus 001 Device 005: ID 0951:1603 Kingston Technology Data Traveler 1GB/2GB Pen Drive
Bus 001 Device 004: ID 1058:0702 Western Digital Technologies, Inc. Passport External HDD
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 054c:0155 Sony Corp.
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 04e8:3292 Samsung Electronics Co., Ltd
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 05e3:1205 Genesys Logic, Inc. Afilias Optical Mouse H3003
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

uname -a
Linux xxxxx-desktop 2.6.28-15-generic #49-Ubuntu SMP Tue Aug 18 18:40:08 UTC 2009 i686 GNU/Linux

skype --version
Skype 2.0.0.72
Copyright (c) 2004-2007, Skype Limited

dmesg
db ro vga=791 quiet splash
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] TSC: PIT calibration matches PMTIMER. 3 loops
[    0.000000] Detected 2659.138 MHz processor.
[    0.004000] Console: colour dummy device 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.004000] allocated 3927680 bytes of page_cgroup
[    0.004000] please try cgroup_disable=memory option if you don't want
[    0.004000] Scanning for low memory corruption every 60 seconds
[    0.004000] Memory: 759084k/785600k available (4115k kernel code, 25948k reserved, 2199k data, 532k init, 0k highmem)
[    0.004000] virtual kernel memory layout:
[    0.004000]     fixmap  : 0xffc77000 - 0xfffff000   (3616 kB)
[    0.004000]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
[    0.004000]     vmalloc : 0xf0730000 - 0xff3fe000   ( 236 MB)
[    0.004000]     lowmem  : 0xc0000000 - 0xeff30000   ( 767 MB)
[    0.004000]       .init : 0xc0733000 - 0xc07b8000   ( 532 kB)
[    0.004000]       .data : 0xc0504f5f - 0xc072ae60   (2199 kB)
[    0.004000]       .text : 0xc0100000 - 0xc0504f5f   (4115 kB)
[    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.004000] SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.004017] Calibrating delay loop (skipped), value calculated using timer frequency.. 5318.27 BogoMIPS (lpj=10636552)
[    0.004046] Security Framework initialized
[    0.004055] SELinux:  Disabled at boot.
[    0.004083] AppArmor: AppArmor initialized
[    0.004099] Mount-cache hash table entries: 512
[    0.004323] Initializing cgroup subsys ns
[    0.004331] Initializing cgroup subsys cpuacct
[    0.004335] Initializing cgroup subsys memory
[    0.004342] Initializing cgroup subsys freezer
[    0.004370] CPU: Trace cache: 12K uops, L1 D cache: 16K
[    0.004374] CPU: L2 cache: 256K
[    0.004378] CPU: Hyper-Threading is disabled
[    0.004384] using mwait in idle threads.
[    0.004404] Checking 'hlt' instruction... OK.
[    0.021138] SMP alternatives: switching to UP code
[    0.164043] ACPI: Core revision 20080926
[    0.168111] ACPI: Checking initramfs for custom DSDT
[    0.493902] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.533604] CPU0: Intel(R) Celeron(R) CPU 2.66GHz stepping 01
[    0.536002] Brought up 1 CPUs
[    0.536002] Total of 1 processors activated (5318.27 BogoMIPS).
[    0.536002] CPU0 attaching NULL sched-domain.
[    0.536002] net_namespace: 776 bytes
[    0.536002] Booting paravirtualized kernel on bare hardware
[    0.536002] Time: 12:45:01  Date: 09/04/09
[    0.536002] regulator: core version 0.5
[    0.536002] NET: Registered protocol family 16
[    0.536002] EISA bus registered
[    0.536002] ACPI: bus type pci registered
[    0.536002] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
[    0.536002] PCI: Using configuration type 1 for base access
[    0.536543] ACPI: EC: Look up EC in DSDT
[    0.545905] ACPI: Interpreter enabled
[    0.545915] ACPI: (supports S0 S1 S3 S4 S5)
[    0.545946] ACPI: Using IOAPIC for interrupt routing
[    0.556336] ACPI: No dock devices found.
[    0.556411] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.556498] pci 0000:00:00.0: reg 10 32bit mmio: [0xf8000000-0xfbffffff]
[    0.556834] pci 0000:00:01.0: supports D1
[    0.556892] pci 0000:00:0f.0: reg 10 io port: [0xec00-0xec07]
[    0.556900] pci 0000:00:0f.0: reg 14 io port: [0xe800-0xe803]
[    0.556908] pci 0000:00:0f.0: reg 18 io port: [0xe400-0xe407]
[    0.556916] pci 0000:00:0f.0: reg 1c io port: [0xe000-0xe003]
[    0.556924] pci 0000:00:0f.0: reg 20 io port: [0xdc00-0xdc0f]
[    0.556932] pci 0000:00:0f.0: reg 24 io port: [0xd800-0xd8ff]
[    0.557017] pci 0000:00:0f.1: reg 20 io port: [0xfc00-0xfc0f]
[    0.557108] pci 0000:00:10.0: reg 20 io port: [0xc000-0xc01f]
[    0.557130] pci 0000:00:10.0: supports D1 D2
[    0.557132] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.557138] pci 0000:00:10.0: PME# disabled
[    0.557197] pci 0000:00:10.1: reg 20 io port: [0xc400-0xc41f]
[    0.557218] pci 0000:00:10.1: supports D1 D2
[    0.557221] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.557226] pci 0000:00:10.1: PME# disabled
[    0.557284] pci 0000:00:10.2: reg 20 io port: [0xc800-0xc81f]
[    0.557306] pci 0000:00:10.2: supports D1 D2
[    0.557308] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.557313] pci 0000:00:10.2: PME# disabled
[    0.557371] pci 0000:00:10.3: reg 20 io port: [0xcc00-0xcc1f]
[    0.557393] pci 0000:00:10.3: supports D1 D2
[    0.557395] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.557400] pci 0000:00:10.3: PME# disabled
[    0.557438] pci 0000:00:10.4: reg 10 32bit mmio: [0xfebff800-0xfebff8ff]
[    0.557481] pci 0000:00:10.4: supports D1 D2
[    0.557483] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[    0.557488] pci 0000:00:10.4: PME# disabled
[    0.557566] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.557620] pci 0000:00:11.5: reg 10 io port: [0xd000-0xd0ff]
[    0.557665] pci 0000:00:11.5: supports D1 D2
[    0.557706] pci 0000:00:12.0: reg 10 io port: [0xd400-0xd4ff]
[    0.557715] pci 0000:00:12.0: reg 14 32bit mmio: [0xfebffc00-0xfebffcff]
[    0.557753] pci 0000:00:12.0: supports D1 D2
[    0.557755] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.557760] pci 0000:00:12.0: PME# disabled
[    0.557825] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
[    0.557832] pci 0000:01:00.0: reg 14 32bit mmio: [0xe0000000-0xefffffff]
[    0.557856] pci 0000:01:00.0: reg 30 32bit mmio: [0xfeae0000-0xfeafffff]
[    0.557913] pci 0000:00:01.0: bridge 32bit mmio: [0xfca00000-0xfeafffff]
[    0.557919] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd7f00000-0xf7efffff]
[    0.557929] bus 00 -> node 0
[    0.557941] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.566449] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
[    0.566615] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
[    0.566776] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
[    0.566936] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[    0.567096] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[    0.567256] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[    0.567416] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[    0.567576] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[    0.567774] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 0E, should be 00 [20080926]
[    0.567808] ACPI: WMI: Mapper loaded
[    0.568206] SCSI subsystem initialized
[    0.568308] libata version 3.00 loaded.
[    0.568420] usbcore: registered new interface driver usbfs
[    0.568454] usbcore: registered new interface driver hub
[    0.568522] usbcore: registered new device driver usb
[    0.568749] PCI: Using ACPI for IRQ routing
[    0.568922] Bluetooth: Core ver 2.13
[    0.568922] NET: Registered protocol family 31
[    0.568922] Bluetooth: HCI device and connection manager initialized
[    0.568922] Bluetooth: HCI socket layer initialized
[    0.568922] NET: Registered protocol family 8
[    0.568922] NET: Registered protocol family 20
[    0.568922] NetLabel: Initializing
[    0.568922] NetLabel:  domain hash size = 128
[    0.568922] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.568922] NetLabel:  unlabeled traffic allowed by default
[    0.568922] AppArmor: AppArmor Filesystem Enabled
[    0.568922] pnp: PnP ACPI init
[    0.568922] ACPI: bus type pnp registered
[    0.575671] pnp: PnP ACPI: found 13 devices
[    0.575677] ACPI: ACPI bus type pnp unregistered
[    0.575683] PnPBIOS: Disabled by ACPI PNP
[    0.575708] system 00:08: ioport range 0x295-0x296 has been reserved
[    0.575712] system 00:08: ioport range 0x3e0-0x3e7 has been reserved
[    0.575715] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[    0.575718] system 00:08: ioport range 0x800-0x87f has been reserved
[    0.575721] system 00:08: ioport range 0x400-0x41f has been reserved
[    0.575732] system 00:09: iomem range 0xfec80000-0xfec800ff has been reserved
[    0.575736] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
[    0.575739] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.575743] system 00:09: iomem range 0xfff80000-0xffffffff could not be reserved
[    0.575754] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[    0.575758] system 00:0c: iomem range 0xc0000-0xdffff could not be reserved
[    0.575762] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[    0.575765] system 00:0c: iomem range 0x100000-0x2fffffff could not be reserved
[    0.610620] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.610624] pci 0000:00:01.0:   IO window: disabled
[    0.610631] pci 0000:00:01.0:   MEM window: 0xfca00000-0xfeafffff
[    0.610636] pci 0000:00:01.0:   PREFETCH window: 0x000000d7f00000-0x000000f7efffff
[    0.610658] pci 0000:00:01.0: setting latency timer to 64
[    0.610664] bus: 00 index 0 io port: [0x00-0xffff]
[    0.610666] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[    0.610669] bus: 01 index 0 mmio: [0x0-0x0]
[    0.610672] bus: 01 index 1 mmio: [0xfca00000-0xfeafffff]
[    0.610674] bus: 01 index 2 mmio: [0xd7f00000-0xf7efffff]
[    0.610676] bus: 01 index 3 mmio: [0x0-0x0]
[    0.610696] NET: Registered protocol family 2
[    0.610903] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.611405] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.613034] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.613895] TCP: Hash tables configured (established 131072 bind 65536)
[    0.613902] TCP reno registered
[    0.614184] NET: Registered protocol family 1
[    0.614387] checking if image is initramfs... it is
[    1.112094] Switched to high resolution mode on CPU 0
[    1.302210] Freeing initrd memory: 7373k freed
[    1.302407] cpufreq: No nForce2 chipset.
[    1.302616] audit: initializing netlink socket (disabled)
[    1.302646] type=2000 audit(1252068301.300:1): initialized
[    1.311912] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    1.313556] VFS: Disk quotas dquot_6.5.1
[    1.313660] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.314606] fuse init (API version 7.10)
[    1.314749] msgmni has been set to 1497
[    1.315111] alg: No test for stdrng (krng)
[    1.315144] io scheduler noop registered
[    1.315147] io scheduler anticipatory registered
[    1.315150] io scheduler deadline registered
[    1.315195] io scheduler cfq registered (default)
[    1.315221] PCI: VIA PCI bridge detected.Disabling DAC.
[    1.315323] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
[    1.315350] pci 0000:01:00.0: Boot video device
[    1.320788] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.320810] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.320997] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    1.321002] ACPI: Power Button (FF) [PWRF]
[    1.321086] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    1.321090] ACPI: Power Button (CM) [PWRB]
[    1.321453] processor ACPI_CPU:00: registered as cooling_device0
[    1.321460] ACPI: Processor [CPU1] (supports 16 throttling states)
[    1.325293] isapnp: Scanning for PnP cards...
[    1.677006] isapnp: No Plug & Play device found
[    1.679153] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    1.679269] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.679831] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.681056] brd: module loaded
[    1.681604] loop: module loaded
[    1.681781] Fixed MDIO Bus: probed
[    1.681789] PPP generic driver version 2.4.2
[    1.681898] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    1.681957] Driver 'sd' needs updating - please use bus_type methods
[    1.681978] Driver 'sr' needs updating - please use bus_type methods
[    1.682182] sata_via 0000:00:0f.0: version 2.4
[    1.682217] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[    1.682286] sata_via 0000:00:0f.0: routed to hard irq line 10
[    1.682477] scsi0 : sata_via
[    1.682681] scsi1 : sata_via
[    1.682753] ata1: SATA max UDMA/133 cmd 0xec00 ctl 0xe800 bmdma 0xdc00 irq 20
[    1.682758] ata2: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xdc08 irq 20
[    1.884043] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    2.096026] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    2.106747] pata_via 0000:00:0f.1: version 0.3.3
[    2.106776] pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    2.107035] scsi2 : pata_via
[    2.107160] scsi3 : pata_via
[    2.110083] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[    2.110088] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[    2.280570] ata3.00: ATA-7: HDS728080PLAT20, PF2OA21B, max UDMA/133
[    2.280575] ata3.00: 160836480 sectors, multi 16: LBA48
[    2.304442] ata3.00: configured for UDMA/133
[    2.468439] ata4.00: ATAPI: _NEC DVD_RW ND-3550A, 1.07, max UDMA/33
[    2.484332] ata4.00: configured for UDMA/33
[    2.484814] scsi 2:0:0:0: Direct-Access     ATA      HDS728080PLAT20  PF2O PQ: 0 ANSI: 5
[    2.485022] sd 2:0:0:0: [sda] 160836480 512-byte hardware sectors: (82.3 GB/76.6 GiB)
[    2.485053] sd 2:0:0:0: [sda] Write Protect is off
[    2.485057] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.485099] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.485234] sd 2:0:0:0: [sda] 160836480 512-byte hardware sectors: (82.3 GB/76.6 GiB)
[    2.485259] sd 2:0:0:0: [sda] Write Protect is off
[    2.485263] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.485303] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.485311]  sda: sda1 sda2 sda3 sda4
[    2.514251] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.514359] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    2.515651] scsi 3:0:0:0: CD-ROM            _NEC     DVD_RW ND-3550A  1.07 PQ: 0 ANSI: 5
[    2.518904] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[    2.518911] Uniform CD-ROM driver Revision: 3.20
[    2.519114] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    2.519206] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    2.519465] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.519518] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[    2.519559] ehci_hcd 0000:00:10.4: EHCI Host Controller
[    2.519698] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[    2.519794] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfebff800
[    2.528027] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[    2.528174] usb usb1: configuration #1 chosen from 1 choice
[    2.528222] hub 1-0:1.0: USB hub found
[    2.528243] hub 1-0:1.0: 8 ports detected
[    2.528451] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.528496] uhci_hcd: USB Universal Host Controller Interface driver
[    2.528575] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    2.528588] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    2.528686] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    2.528718] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000c000
[    2.528866] usb usb2: configuration #1 chosen from 1 choice
[    2.528909] hub 2-0:1.0: USB hub found
[    2.528924] hub 2-0:1.0: 2 ports detected
[    2.529073] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    2.529085] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    2.529179] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[    2.529207] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000c400
[    2.529335] usb usb3: configuration #1 chosen from 1 choice
[    2.529379] hub 3-0:1.0: USB hub found
[    2.529395] hub 3-0:1.0: 2 ports detected
[    2.529574] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    2.529587] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    2.529671] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[    2.529699] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c800
[    2.529828] usb usb4: configuration #1 chosen from 1 choice
[    2.529876] hub 4-0:1.0: USB hub found
[    2.529900] hub 4-0:1.0: 2 ports detected
[    2.530061] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    2.530074] uhci_hcd 0000:00:10.3: UHCI Host Controller
[    2.530175] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[    2.530205] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000cc00
[    2.530334] usb usb5: configuration #1 chosen from 1 choice
[    2.530376] hub 5-0:1.0: USB hub found
[    2.530390] hub 5-0:1.0: 2 ports detected
[    2.530639] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    2.530644] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    2.530795] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.531005] mice: PS/2 mouse device common for all mice
[    2.531247] rtc_cmos 00:02: RTC can wake from S4
[    2.531314] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    2.531378] rtc0: alarms up to one year, y3k, 114 bytes nvram
[    2.531505] device-mapper: uevent: version 1.0.3
[    2.531776] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[    2.531903] device-mapper: multipath: version 1.0.5 loaded
[    2.531909] device-mapper: multipath round-robin: version 1.0.0 loaded
[    2.532121] EISA: Probing bus 0 at eisa.0
[    2.532163] EISA: Detected 0 cards.
[    2.532244] cpuidle: using governor ladder
[    2.532248] cpuidle: using governor menu
[    2.532996] TCP cubic registered
[    2.533128] NET: Registered protocol family 10
[    2.533700] lo: Disabled Privacy Extensions
[    2.534088] NET: Registered protocol family 17
[    2.534136] Bluetooth: L2CAP ver 2.11
[    2.534139] Bluetooth: L2CAP socket layer initialized
[    2.534142] Bluetooth: SCO (Voice Link) ver 0.6
[    2.534144] Bluetooth: SCO socket layer initialized
[    2.534243] Bluetooth: RFCOMM socket layer initialized
[    2.534260] Bluetooth: RFCOMM TTY layer initialized
[    2.534263] Bluetooth: RFCOMM ver 1.10
[    2.534372] Using IPI No-Shortcut mode
[    2.534562] registered taskstats version 1
[    2.534720]   Magic number: 9:824:783
[    2.534867] rtc_cmos 00:02: setting system clock to 2009-09-04 12:45:03 UTC (1252068303)
[    2.534872] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.534875] EDD information not available.
[    2.535818] Freeing unused kernel memory: 532k freed
[    2.535968] Write protecting the kernel text: 4116k
[    2.536056] Write protecting the kernel read-only data: 1528k
[    2.571798] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    2.660894] vesafb: framebuffer at 0xe0000000, mapped to 0xf0800000, using 3072k, total 262144k
[    2.660901] vesafb: mode is 1024x768x16, linelength=2048, pages=1
[    2.660903] vesafb: protected mode interface info at c000:dcd0
[    2.660907] vesafb: pmi: set display start = c00cdd06, set palette = c00cdd70
[    2.660909] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
[    2.660928] vesafb: scrolling: redraw
[    2.660931] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    2.661097] Console: switching to colour frame buffer device 128x48
[    2.697312] fb0: VESA VGA frame buffer device
[    3.039805] Floppy drive(s): fd0 is 1.44M
[    3.060071] FDC 0 is a post-1991 82077
[    3.060100] usb 1-5: new high speed USB device using ehci_hcd and address 4
[    3.194797] usb 1-5: configuration #1 chosen from 1 choice
[    3.253642] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[    3.253742] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    3.254650] eth0: VIA Rhine II at 0xfebffc00, 00:13:8f:0f:a2:56, IRQ 23.
[    3.255366] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[    3.304116] usb 1-8: new high speed USB device using ehci_hcd and address 5
[    3.439602] usb 1-8: configuration #1 chosen from 1 choice
[    3.680133] usb 2-2: new low speed USB device using uhci_hcd and address 2
[    3.786253] Initializing USB Mass Storage driver...
[    3.789398] scsi4 : SCSI emulation for USB Mass Storage devices
[    3.790263] usb-storage: device found at 4
[    3.790267] usb-storage: waiting for device to settle before scanning
[    3.792092] scsi5 : SCSI emulation for USB Mass Storage devices
[    3.793050] usbcore: registered new interface driver usb-storage
[    3.793057] USB Mass Storage support registered.
[    3.793461] usb-storage: device found at 5
[    3.793466] usb-storage: waiting for device to settle before scanning
[    3.849760] usb 2-2: configuration #1 chosen from 1 choice
[    3.861381] usbcore: registered new interface driver hiddev
[    3.874407] input: USB Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input4
[    3.875248] generic-usb 0003:05E3:1205.0001: input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:10.0-2/input0
[    3.875283] usbcore: registered new interface driver usbhid
[    3.875290] usbhid: v2.6:USB HID core driver
[    4.100045] usb 3-1: new full speed USB device using uhci_hcd and address 2
[    4.272160] usb 3-1: configuration #1 chosen from 1 choice
[    8.788207] usb-storage: device scan complete
[    8.788798] scsi 4:0:0:0: Direct-Access     WD       1200BEV External 1.04 PQ: 0 ANSI: 4
[    8.791312] sd 4:0:0:0: [sdb] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
[    8.792847] sd 4:0:0:0: [sdb] Write Protect is off
[    8.792853] sd 4:0:0:0: [sdb] Mode Sense: 21 00 00 00
[    8.792856] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[    8.793956] sd 4:0:0:0: [sdb] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
[    8.794806] sd 4:0:0:0: [sdb] Write Protect is off
[    8.794813] sd 4:0:0:0: [sdb] Mode Sense: 21 00 00 00
[    8.794817] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[    8.794830]  sdb:<7>usb-storage: device scan complete
[    8.795828] scsi 5:0:0:0: Direct-Access     Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
[    8.937724] kjournald starting.  Commit interval 5 seconds
[    8.937758] EXT3-fs: mounted filesystem with ordered data mode.
[   11.026700]  sdb1
[   11.026954] sd 4:0:0:0: [sdb] Attached SCSI disk
[   11.027086] sd 4:0:0:0: Attached scsi generic sg2 type 0
[   11.028042] sd 5:0:0:0: [sdc] 3973120 512-byte hardware sectors: (2.03 GB/1.89 GiB)
[   11.028648] sd 5:0:0:0: [sdc] Write Protect is off
[   11.028652] sd 5:0:0:0: [sdc] Mode Sense: 23 00 00 00
[   11.028655] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[   11.030652] sd 5:0:0:0: [sdc] 3973120 512-byte hardware sectors: (2.03 GB/1.89 GiB)
[   11.031271] sd 5:0:0:0: [sdc] Write Protect is off
[   11.031276] sd 5:0:0:0: [sdc] Mode Sense: 23 00 00 00
[   11.031279] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[   11.031712]  sdc: sdc1
[   11.032640] sd 5:0:0:0: [sdc] Attached SCSI removable disk
[   11.032784] sd 5:0:0:0: Attached scsi generic sg3 type 0
[   16.343895] udev: starting version 141
[   16.505180] Linux agpgart interface v0.103
[   16.514035] agpgart: Detected VIA PT880 chipset
[   16.519352] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[   16.579911] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[   16.580557] parport0: cannot get buffer for DMA, resorting to PIO operation
[   16.656359] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   17.284359] nvidia: module license 'NVIDIA' taints kernel.
[   17.591117] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3292
[   17.591171] usbcore: registered new interface driver usblp
[   17.769478] input: PC Speaker as /devices/platform/pcspkr/input/input5
[   17.942165] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   17.943409] NVRM: loading NVIDIA UNIX x86 Kernel Module  173.14.16  Sat Jan 24 19:42:59 PST 2009
[   18.267070] ppdev: user-space parallel port driver
[   18.361793] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[   18.361968] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[   19.090272] lp0: using parport0 (interrupt-driven).
[   19.138800] w83627hf: Found W83697HF chip at 0x290
[   19.360992] Adding 1020116k swap on /dev/sda3.  Priority:-1 extents:1 across:1020116k
[   19.820884] EXT3 FS on sda2, internal journal
[   20.606684] kjournald starting.  Commit interval 5 seconds
[   20.608192] EXT3 FS on sda4, internal journal
[   20.608203] EXT3-fs: mounted filesystem with ordered data mode.
[   21.028315] type=1505 audit(1252061121.993:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2066
[   21.100198] type=1505 audit(1252061122.065:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2070
[   21.100570] type=1505 audit(1252061122.065:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2070
[   21.100758] type=1505 audit(1252061122.065:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2070
[   21.100905] type=1505 audit(1252061122.065:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2070
[   21.150824] type=1505 audit(1252061122.113:7): operation="profile_load" name="/usr/bin/freshclam" name2="default" pid=2075
[   21.215596] type=1505 audit(1252061122.177:8): operation="profile_load" name="/usr/sbin/clamd" name2="default" pid=2079
[   21.411343] type=1505 audit(1252061122.373:9): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2083
[   21.411866] type=1505 audit(1252061122.373:10): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2083
[   21.457363] type=1505 audit(1252061122.421:11): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2087
[   30.962159] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[   30.962166] vboxdrv: Successfully done.
[   30.962168] vboxdrv: Found 1 processor cores.
[   30.962394] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   30.962398] vboxdrv: Successfully loaded version 2.2.4 (interface 0x000a0009).
[   33.112903] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   33.112910] Bluetooth: BNEP filters: protocol multicast
[   33.360544] Bridge firewalling registered
[   37.610223] agpgart-via 0000:00:00.0: AGP 3.5 bridge
[   37.610250] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode
[   37.610340] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode
[   39.035979] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   39.788609] ppdev0: registered pardevice
[   39.833174] ppdev0: unregistered pardevice
[   49.680012] eth0: no IPv6 routers present
[  157.360043] usb 5-1: new full speed USB device using uhci_hcd and address 2
[  157.586670] usb 5-1: configuration #1 chosen from 1 choice
[  157.752766] Linux video capture interface: v2.00
[  157.771628] gspca: main v2.3.0 registered
[  157.775039] gspca: probing 054c:0155
[  157.968192] ov519: I2C synced in 1 attempt(s)
[  157.968198] ov519: starting OV7xx0 configuration
[  157.980192] ov519: Sensor is an OV7648
[  158.002449] gspca: probe ok
[  158.002489] gspca: probing 054c:0155
[  158.002542] gspca: probing 054c:0155
[  158.002594] usbcore: registered new interface driver ov519
[  158.002599] ov519: registered
[  158.003194] usbcore: registered new interface driver ov51x
[  158.003214] ov51x_jpeg: 1.5.9 : ov51x USB Camera Driver
[  158.125309] usbcore: registered new interface driver snd-usb-audio
[  191.369760] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
Stovky článků o hrách pro konzole značek Sony PlayStation, Microsoft Xbox a Nintendo. Sortiment se každým dnem rozšiřuje! Konzolista.cz
https://www.facebook.com/konzolista.cz
http://konzolista.tiscali.cz/

arrange

  • Závislák
  • ****
  • Příspěvků: 4031
  • Karma: +473/-15
  • "jdu s hlavou vztyčenou..."
    • Zobrazit profil
Re: Kamera Eyetoy a Skype
« Odpověď #3 kdy: 04 Září 2009, 17:10:40 »
Ten výpis vypadá OK, systém kameru rozpozná, používá gspca modul, nedává chyby. Zkus ještě tento postup (anglicky), a pokud to nepomůže, dej tu ještě výpis z
Kód: [Vybrat]
lsmod | grep video
ls -l /dev/video*
groups
http://www.openstreetmap.org - mapy celého světa "wiki style"

play3man

  • Člen
  • **
  • Příspěvků: 287
  • Karma: +10/-3
    • Zobrazit profil
Re: Kamera Eyetoy a Skype
« Odpověď #4 kdy: 04 Září 2009, 17:44:08 »
Nepomohlo. A este ktomu. Kamerka nejde vobec! Podla toho co som cital to bolo na odstranenie pruhov.

Vypisy:

 lsmod | grep video
video                  25360  0
output                 11008  1 video
videodev               41600  2 ov51x_jpeg,gspca_main
v4l1_compat            21764  1 videodev

ls -l /dev/video*
crw-rw----+ 1 root video 81, 0 2009-09-04 17:11 /dev/video0

xxx adm lp dialout fax cdrom tape audio dip video plugdev scanner fuse lpadmin netdev admin sambashare vboxusers
Stovky článků o hrách pro konzole značek Sony PlayStation, Microsoft Xbox a Nintendo. Sortiment se každým dnem rozšiřuje! Konzolista.cz
https://www.facebook.com/konzolista.cz
http://konzolista.tiscali.cz/

arrange

  • Závislák
  • ****
  • Příspěvků: 4031
  • Karma: +473/-15
  • "jdu s hlavou vztyčenou..."
    • Zobrazit profil
Re: Kamera Eyetoy a Skype
« Odpověď #5 kdy: 04 Září 2009, 18:14:45 »
Nepomohlo. A este ktomu. Kamerka nejde vobec!
Ten odkaz popisoval jen změnu ve Skype konfiguračním souboru /home/user/.Skype/skype-user/config.xml, takže by na kameru jako takovou neměl mít žádný vliv. Pokud si ale myslíš, že ano, vrať ty změny zpátky: obnov zálohu, příp. vymaž ty řádky, které jsi do souboru přidal.

V těch Tvých výpisech nevidím žádnou chybu, takže už nevím, co bych Ti poradil. V Jaunty by už nemělo být potřeba instalovat ovladač, vše obstarává gspca modul, který je v jádře. Takže by možná pomohla odinstalace toho starého ov51x ovladače, ale těžko říct.

Jediné vlákno, kde uživatelé tvrdí, že tu kameru rozchodili, jsem našel tady. Podívej se na to, ale asi přeskoč začátek, protože ten se netýká Jaunty. Anebo tu kameru zkus připojit "načisto" v LiveCD.

Napiš, jak jsi dopadl  ;)
http://www.openstreetmap.org - mapy celého světa "wiki style"

play3man

  • Člen
  • **
  • Příspěvků: 287
  • Karma: +10/-3
    • Zobrazit profil
Re: Kamera Eyetoy a Skype
« Odpověď #6 kdy: 05 Září 2009, 09:08:47 »
Podla mna to nejde prave preto ze je tam ten gspca modul. Lebo to tam naozaj bolo od zaciatku. Kamerku najde: Eyetoy atd.. viberiem hu a dam test ale obraz tam nieje. Ked sa my to podarylo raz rozchodit tak to bolo prave stym ov51x. Tam my ta kamerka pekne isla ale neviem ako to vratiti naspat uz sto krat som to preinstaloval a restartoval pc ale uz nikdy my ta kamerka nenabehla. Keby som vedel ako vratit toto ov51x naspat.
« Poslední změna: 05 Září 2009, 09:26:56 od Fuse 10 »
Stovky článků o hrách pro konzole značek Sony PlayStation, Microsoft Xbox a Nintendo. Sortiment se každým dnem rozšiřuje! Konzolista.cz
https://www.facebook.com/konzolista.cz
http://konzolista.tiscali.cz/

arrange

  • Závislák
  • ****
  • Příspěvků: 4031
  • Karma: +473/-15
  • "jdu s hlavou vztyčenou..."
    • Zobrazit profil
Re: Kamera Eyetoy a Skype
« Odpověď #7 kdy: 05 Září 2009, 18:54:11 »
Keby som vedel ako vratit toto ov51x naspat.
V Terminálu
Kód: [Vybrat]
sudo rmmod gspca
modprobe ov51x-jpeg
Pokud nevypíše žádnou chybu, vyzkoušej kameru (toto je jen na zkoušku, po restartu se to vrátí na pův. nastavení).
http://www.openstreetmap.org - mapy celého světa "wiki style"

play3man

  • Člen
  • **
  • Příspěvků: 287
  • Karma: +10/-3
    • Zobrazit profil
Re: Kamera Eyetoy a Skype
« Odpověď #8 kdy: 05 Září 2009, 20:17:45 »
modprobe ov51x-jpeg
WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
WARNING: All config files need .conf: /etc/modprobe.d/options, it will be ignored in a future release.
WARNING: Error inserting videodev (/lib/modules/2.6.28-15-generic/kernel/drivers/media/video/videodev.ko): Operation not permitted
FATAL: Error inserting ov51x_jpeg (/lib/modules/2.6.28-15-generic/extra/ov51x-jpeg.ko): Operation not permitted

Takze kamerka nejde co je vidiet aj z vypisu. Ale som presvedceny ze z ov51x-jpeg to islo. Teraz ked ov51x-jpeg nieje aktivny tak pise nazov kamerky pekne Eyetoy atd... No ale ked bol aktivny tak tam bolo toto: http://wiki.ubuntu.cz/Webkamery?action=AttachFile&do=get&target=gstreamer-properties.png
Stovky článků o hrách pro konzole značek Sony PlayStation, Microsoft Xbox a Nintendo. Sortiment se každým dnem rozšiřuje! Konzolista.cz
https://www.facebook.com/konzolista.cz
http://konzolista.tiscali.cz/

arrange

  • Závislák
  • ****
  • Příspěvků: 4031
  • Karma: +473/-15
  • "jdu s hlavou vztyčenou..."
    • Zobrazit profil
Re: Kamera Eyetoy a Skype
« Odpověď #9 kdy: 06 Září 2009, 01:20:23 »
modprobe ov51x-jpeg
WARNING: Error inserting videodev (/lib/modules/2.6.28-15-generic/kernel/drivers/media/video/videodev.ko): Operation not permitted
FATAL: Error inserting ov51x_jpeg (/lib/modules/2.6.28-15-generic/extra/ov51x-jpeg.ko): Operation not permitted
No jo, chybělo tam to sudo, takže
Kód: [Vybrat]
sudo rmmod gspca
sudo modprobe ov51x-jpeg
http://www.openstreetmap.org - mapy celého světa "wiki style"

play3man

  • Člen
  • **
  • Příspěvků: 287
  • Karma: +10/-3
    • Zobrazit profil
Re: Kamera Eyetoy a Skype
« Odpověď #10 kdy: 06 Září 2009, 11:24:43 »
Diky moc teraz kamerka ide aj v skype. Takto to ostane aj po restarte? Ked nie tak by som bol rad aby to tak ostalo :D

Edit: po restarte kamerka nejde. Ked som dal tie prikazy tak uz nereaguje ani na tie. Dam napise to co predtym: sudo modprobe ov51x-jpeg
WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
WARNING: All config files need .conf: /etc/modprobe.d/options, it will be ignored in a future release.

Ale kamerka my uz nenaskoci a je tam zasa len ten sum... :( Moze to byt tim ze ked som zapinal pc kamerka bola pripojena?
« Poslední změna: 06 Září 2009, 17:08:42 od Fuse 10 »
Stovky článků o hrách pro konzole značek Sony PlayStation, Microsoft Xbox a Nintendo. Sortiment se každým dnem rozšiřuje! Konzolista.cz
https://www.facebook.com/konzolista.cz
http://konzolista.tiscali.cz/

arrange

  • Závislák
  • ****
  • Příspěvků: 4031
  • Karma: +473/-15
  • "jdu s hlavou vztyčenou..."
    • Zobrazit profil
Re: Kamera Eyetoy a Skype
« Odpověď #11 kdy: 06 Září 2009, 19:38:59 »
Diky moc teraz kamerka ide aj v skype. Takto to ostane aj po restarte? Ked nie tak by som bol rad aby to tak ostalo :D
Aby to fungovalo i po restartu, mělo by stačit přidat ov51x-jpeg do /etc/modules a blacklist gspca do /etc/modprobe.d/blacklist.conf (jako root). Radši ty soubory před úpravami zálohuj.

Nebo to samé přes Terminál
Kód: [Vybrat]
sudo -i
cd /etc
cp modules modules.zaloha
cp modprobe.d/blacklist.conf modprobe.d/blacklist.conf.zaloha
echo "ov51x-jpeg" >> modules
echo "blacklist\ gspca" >> modprobe.d/blacklist.conf
exit
Pak restart a vyzkoušet.

Pokud nefunguje, dej tu výstup z
Kód: [Vybrat]
lsmod | grep video
dmesg
(do kódu!!)
http://www.openstreetmap.org - mapy celého světa "wiki style"