Prosíme přihlašte se nebo zaregistrujte.

Přihlašte se svým uživatelským jménem a heslem.

Autor Téma: Problém s ovladačem grafické karty u HP Compaq 6720s [ VYŘEŠENO ]  (Přečteno 1399 krát)

zzz

  • Návštěvník
  • *
  • Příspěvků: 5
    • Zobrazit profil
Zdravím,

často mi "zamrzne" a zašedne obrazovka, myš přestane reagovat, počítač je v tu chvíli úplně neovladatelný. Někdy je to chvilkové, někdy vše zamrzne úplně, a to i tak, že se nelze přepnout do shellu a pozabíjet potřebné procesy. Stává se mi to hlavně při práci s okny - přepínání, otevírání, zavírání, ...

Domnívám se, že je to způsobeno nesprávným ovladačem grafické karty - systém nenajde ten pravý a vypůjčí si jiný, což způsobuje to zpomalení nebo úplné "zamrznutí". Nebo něčím jiným?

(Zkoušel jsem: Nastavení systému -> Dodatečné ovladače, ale systém žádné nenajde.)
 
Víc už ze sebe asi nevypotím, na instalaci ovladače si bez rady netroufám, už jsem jednou takto experimentoval a skončilo to kolapsem systému, musel jsem jej kompletně přeinstalovat.

Vím, že se bez toho dá "žít", ale dost mi to zpomaluje práci a někdy musím násilně vypínat počítač.

Budu tedy vděčný za jakoukoliv užitečnou radu, ale pokud si také nejste jisti, raději to nechte být. Metoda pokus-omyl je v tomto případě asi moc riskantní.

Děkuji

Informace o vydání:

Výpis příkazu $ lsb_release -a:

Kód: [Vybrat]
$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 12.04.1 LTS
Release: 12.04
Codename: precise

Nastavení systému -> Podrobnosti -> Přehled:

Počítač:HP Compaq 6720s
Paměť:1,9 GiB
Procesor:Intel® Pentium(R) Dual CPU T2410 @ 2.00GHz × 2
Grafika:Intel® 965GME/GLE
Typ OS:64bitová
Disk:155,4 GB

Nastavení systému -> Podrobnosti -> Grafika:

Ovladač:Intel® 965GME/GLE
Režim:Standardní

Výpis příkazu $ lspci | grep VGA:

Kód: [Vybrat]
$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Mobile GME965/GLE960 Integrated Graphics Controller (rev 0c)

Výpis logu XORG.0.log

Kód: [Vybrat]

[    23.349]
X.Org X Server 1.11.3
Release Date: 2011-12-16
[    23.349] X Protocol Version 11, Revision 0
[    23.349] Build Operating System: Linux 2.6.42-23-generic x86_64 Ubuntu
[    23.349] Current Operating System: Linux karel-HP-Compaq-6720s 3.2.0-31-generic #50-Ubuntu SMP Fri Sep 7 16:16:45 UTC 2012 x86_64
[    23.349] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-31-generic root=UUID=a5ec38b4-3f09-407c-af1a-870960c25a3e ro quiet splash vt.handoff=7
[    23.349] Build Date: 29 August 2012  12:12:33AM
[    23.349] xorg-server 2:1.11.4-0ubuntu10.8 (For technical support please see http://www.ubuntu.com/support)
[    23.349] Current version of pixman: 0.24.4
[    23.349] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[    23.349] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    23.349] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct  6 18:36:40 2012
[    23.366] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    23.366] (==) No Layout section.  Using the first Screen section.
[    23.366] (==) No screen section available. Using defaults.
[    23.366] (**) |-->Screen "Default Screen Section" (0)
[    23.366] (**) |   |-->Monitor "<default monitor>"
[    23.367] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[    23.367] (==) Automatically adding devices
[    23.367] (==) Automatically enabling devices
[    23.367] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    23.367] Entry deleted from font path.
[    23.367] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    23.367] Entry deleted from font path.
[    23.367] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    23.367] Entry deleted from font path.
[    23.367] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    23.367] Entry deleted from font path.
[    23.367] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    23.367] Entry deleted from font path.
[    23.367] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    23.367] Entry deleted from font path.
[    23.367] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[    23.367] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    23.367] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[    23.367] (II) Loader magic: 0x7fe6940e2b00
[    23.367] (II) Module ABI versions:
[    23.367] X.Org ANSI C Emulation: 0.4
[    23.367] X.Org Video Driver: 11.0
[    23.367] X.Org XInput driver : 16.0
[    23.367] X.Org Server Extension : 6.0
[    23.368] (--) PCI:*(0:0:2:0) 8086:2a12:103c:30d8 rev 12, Mem @ 0xe4300000/1048576, 0xd0000000/268435456, I/O @ 0x00004000/8
[    23.369] (--) PCI: (0:0:2:1) 8086:2a13:103c:30d8 rev 12, Mem @ 0xe4400000/1048576
[    23.369] (II) Open ACPI successful (/var/run/acpid.socket)
[    23.369] (II) LoadModule: "extmod"
[    23.427] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    23.427] (II) Module extmod: vendor="X.Org Foundation"
[    23.427] compiled for 1.11.3, module version = 1.0.0
[    23.427] Module class: X.Org Server Extension
[    23.427] ABI class: X.Org Server Extension, version 6.0
[    23.427] (II) Loading extension MIT-SCREEN-SAVER
[    23.427] (II) Loading extension XFree86-VidModeExtension
[    23.427] (II) Loading extension XFree86-DGA
[    23.427] (II) Loading extension DPMS
[    23.427] (II) Loading extension XVideo
[    23.427] (II) Loading extension XVideo-MotionCompensation
[    23.427] (II) Loading extension X-Resource
[    23.427] (II) LoadModule: "dbe"
[    23.427] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    23.427] (II) Module dbe: vendor="X.Org Foundation"
[    23.427] compiled for 1.11.3, module version = 1.0.0
[    23.427] Module class: X.Org Server Extension
[    23.427] ABI class: X.Org Server Extension, version 6.0
[    23.427] (II) Loading extension DOUBLE-BUFFER
[    23.427] (II) LoadModule: "glx"
[    23.428] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    23.428] (II) Module glx: vendor="X.Org Foundation"
[    23.428] compiled for 1.11.3, module version = 1.0.0
[    23.428] ABI class: X.Org Server Extension, version 6.0
[    23.428] (==) AIGLX enabled
[    23.428] (II) Loading extension GLX
[    23.428] (II) LoadModule: "record"
[    23.428] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    23.428] (II) Module record: vendor="X.Org Foundation"
[    23.428] compiled for 1.11.3, module version = 1.13.0
[    23.428] Module class: X.Org Server Extension
[    23.428] ABI class: X.Org Server Extension, version 6.0
[    23.428] (II) Loading extension RECORD
[    23.428] (II) LoadModule: "dri"
[    23.428] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    23.429] (II) Module dri: vendor="X.Org Foundation"
[    23.429] compiled for 1.11.3, module version = 1.0.0
[    23.429] ABI class: X.Org Server Extension, version 6.0
[    23.429] (II) Loading extension XFree86-DRI
[    23.429] (II) LoadModule: "dri2"
[    23.429] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    23.429] (II) Module dri2: vendor="X.Org Foundation"
[    23.429] compiled for 1.11.3, module version = 1.2.0
[    23.429] ABI class: X.Org Server Extension, version 6.0
[    23.429] (II) Loading extension DRI2
[    23.429] (==) Matched intel as autoconfigured driver 0
[    23.429] (==) Matched vesa as autoconfigured driver 1
[    23.429] (==) Matched fbdev as autoconfigured driver 2
[    23.429] (==) Assigned the driver to the xf86ConfigLayout
[    23.429] (II) LoadModule: "intel"
[    23.430] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    23.430] (II) Module intel: vendor="X.Org Foundation"
[    23.430] compiled for 1.11.3, module version = 2.17.0
[    23.430] Module class: X.Org Video Driver
[    23.430] ABI class: X.Org Video Driver, version 11.0
[    23.430] (II) LoadModule: "vesa"
[    23.430] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    23.431] (II) Module vesa: vendor="X.Org Foundation"
[    23.431] compiled for 1.11.3, module version = 2.3.0
[    23.431] Module class: X.Org Video Driver
[    23.431] ABI class: X.Org Video Driver, version 11.0
[    23.431] (II) LoadModule: "fbdev"
[    23.431] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    23.431] (II) Module fbdev: vendor="X.Org Foundation"
[    23.431] compiled for 1.11.3, module version = 0.4.2
[    23.431] ABI class: X.Org Video Driver, version 11.0
[    23.431] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[    23.431] (II) VESA: driver for VESA chipsets: vesa
[    23.431] (II) FBDEV: driver for framebuffer: fbdev
[    23.431] (++) using VT number 7

[    23.434] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    23.434] (WW) Falling back to old probe method for vesa
[    23.434] (WW) Falling back to old probe method for fbdev
[    23.434] (II) Loading sub module "fbdevhw"
[    23.434] (II) LoadModule: "fbdevhw"
[    23.434] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    23.435] (II) Module fbdevhw: vendor="X.Org Foundation"
[    23.435] compiled for 1.11.3, module version = 0.0.2
[    23.435] ABI class: X.Org Video Driver, version 11.0
[    23.435] drmOpenDevice: node name is /dev/dri/card0
[    23.435] drmOpenDevice: open result is 9, (OK)
[    23.435] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    23.435] drmOpenDevice: node name is /dev/dri/card0
[    23.435] drmOpenDevice: open result is 9, (OK)
[    23.435] drmOpenByBusid: drmOpenMinor returns 9
[    23.435] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    23.435] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[    23.435] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    23.435] (==) intel(0): RGB weight 888
[    23.435] (==) intel(0): Default visual is TrueColor
[    23.435] (II) intel(0): Integrated Graphics Chipset: Intel(R) 965GME/GLE
[    23.435] (--) intel(0): Chipset: "965GME/GLE"
[    23.435] (**) intel(0): Relaxed fencing enabled
[    23.435] (**) intel(0): Wait on SwapBuffers? enabled
[    23.435] (**) intel(0): Triple buffering? enabled
[    23.435] (**) intel(0): Framebuffer tiled
[    23.435] (**) intel(0): Pixmaps tiled
[    23.435] (**) intel(0): 3D buffers tiled
[    23.435] (**) intel(0): SwapBuffers wait enabled
[    23.435] (==) intel(0): video overlay key set to 0x101fe
[    23.435] (II) intel(0): Output LVDS1 has no monitor section
[    23.508] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[    23.528] (II) intel(0): Output VGA1 has no monitor section
[    23.837] (II) intel(0): Output TV1 has no monitor section
[    23.837] (II) intel(0): EDID for output LVDS1
[    23.837] (II) intel(0): Manufacturer: AUO  Model: 8074  Serial#: 0
[    23.837] (II) intel(0): Year: 2007  Week: 1
[    23.837] (II) intel(0): EDID Version: 1.3
[    23.837] (II) intel(0): Digital Display Input
[    23.837] (II) intel(0): Max Image Size [cm]: horiz.: 33  vert.: 21
[    23.837] (II) intel(0): Gamma: 2.20
[    23.837] (II) intel(0): No DPMS capabilities specified
[    23.837] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    23.837] (II) intel(0): First detailed timing is preferred mode
[    23.837] (II) intel(0): redX: 0.590 redY: 0.345   greenX: 0.315 greenY: 0.555
[    23.837] (II) intel(0): blueX: 0.155 blueY: 0.155   whiteX: 0.313 whiteY: 0.329
[    23.837] (II) intel(0): Manufacturer's mask: 0
[    23.837] (II) intel(0): Supported detailed timing:
[    23.837] (II) intel(0): clock: 69.3 MHz   Image Size:  331 x 207 mm
[    23.837] (II) intel(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1415 h_border: 0
[    23.837] (II) intel(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 816 v_border: 0
[    23.837] (II) intel(0): Unknown vendor-specific block f
[    23.837] (II) intel(0):  AUO
[    23.837] (II) intel(0):  B154EW08 V0
[    23.837] (II) intel(0): EDID (in hex):
[    23.837] (II) intel(0): 00ffffffffffff0006af748000000000
[    23.837] (II) intel(0): 01110103802115780a1cf59758508e27
[    23.837] (II) intel(0): 27505400000001010101010101010101
[    23.837] (II) intel(0): 010101010101121b0087502010303020
[    23.837] (II) intel(0): 36004bcf100000180000000f00000000
[    23.837] (II) intel(0): 00000000000000000020000000fe0041
[    23.837] (II) intel(0): 554f0a200020202020202020000000fe
[    23.837] (II) intel(0): 004231353445573038205630200a0039
[    23.837] (II) intel(0): EDID vendor "AUO", prod id 32884
[    23.837] (II) intel(0): Printing DDC gathered Modelines:
[    23.837] (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1360 1415  800 803 809 816 -hsync -vsync (49.0 kHz)
[    23.837] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    23.837] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    23.837] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    23.837] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    23.837] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    23.837] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    23.837] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    23.837] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    23.837] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    23.837] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    23.837] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    23.837] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    23.837] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    23.837] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    23.837] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[    23.837] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[    23.838] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    23.838] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    23.838] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[    23.838] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[    23.838] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    23.838] (II) intel(0): Printing probed modes for output LVDS1
[    23.838] (II) intel(0): Modeline "1280x800"x60.0   69.30  1280 1328 1360 1415  800 803 809 816 -hsync -vsync (49.0 kHz)
[    23.838] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    23.838] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    23.838] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    23.838] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    23.860] (II) intel(0): EDID for output VGA1
[    24.149] (II) intel(0): EDID for output TV1
[    24.149] (II) intel(0): Output LVDS1 connected
[    24.149] (II) intel(0): Output VGA1 disconnected
[    24.149] (II) intel(0): Output TV1 disconnected
[    24.149] (II) intel(0): Using exact sizes for initial modes
[    24.149] (II) intel(0): Output LVDS1 using initial mode 1280x800
[    24.149] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    24.149] (II) intel(0): Kernel page flipping support detected, enabling
[    24.149] (**) intel(0): Display dimensions: (330, 210) mm
[    24.149] (**) intel(0): DPI set to (98, 96)
[    24.149] (II) Loading sub module "fb"
[    24.149] (II) LoadModule: "fb"
[    24.149] (II) Loading /usr/lib/xorg/modules/libfb.so
[    24.149] (II) Module fb: vendor="X.Org Foundation"
[    24.149] compiled for 1.11.3, module version = 1.0.0
[    24.149] ABI class: X.Org ANSI C Emulation, version 0.4
[    24.149] (II) Loading sub module "dri2"
[    24.149] (II) LoadModule: "dri2"
[    24.150] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    24.150] (II) Module dri2: vendor="X.Org Foundation"
[    24.150] compiled for 1.11.3, module version = 1.2.0
[    24.150] ABI class: X.Org Server Extension, version 6.0
[    24.150] (II) UnloadModule: "vesa"
[    24.150] (II) Unloading vesa
[    24.150] (II) UnloadModule: "fbdev"
[    24.150] (II) Unloading fbdev
[    24.150] (II) UnloadModule: "fbdevhw"
[    24.150] (II) Unloading fbdevhw
[    24.150] (==) Depth 24 pixmap format is 32 bpp
[    24.150] (II) intel(0): [DRI2] Setup complete
[    24.150] (II) intel(0): [DRI2]   DRI driver: i965
[    24.150] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled
[    24.163] (II) UXA(0): Driver registered support for the following operations:
[    24.164] (II)         solid
[    24.164] (II)         copy
[    24.164] (II)         composite (RENDER acceleration)
[    24.164] (II)         put_image
[    24.164] (II)         get_image
[    24.164] (==) intel(0): Backing store disabled
[    24.164] (==) intel(0): Silken mouse enabled
[    24.164] (II) intel(0): Initializing HW Cursor
[    24.180] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    24.181] (==) intel(0): DPMS enabled
[    24.181] (==) intel(0): Intel XvMC decoder enabled
[    24.181] (II) intel(0): Set up textured video
[    24.181] (II) intel(0): Set up overlay video
[    24.181] (II) intel(0): [XvMC] i965_xvmc driver initialized.
[    24.181] (II) intel(0): direct rendering: DRI2 Enabled
[    24.181] (==) intel(0): hotplug detection: "enabled"
[    24.181] (--) RandR disabled
[    24.181] (II) Initializing built-in extension Generic Event Extension
[    24.181] (II) Initializing built-in extension SHAPE
[    24.181] (II) Initializing built-in extension MIT-SHM
[    24.181] (II) Initializing built-in extension XInputExtension
[    24.181] (II) Initializing built-in extension XTEST
[    24.181] (II) Initializing built-in extension BIG-REQUESTS
[    24.181] (II) Initializing built-in extension SYNC
[    24.181] (II) Initializing built-in extension XKEYBOARD
[    24.181] (II) Initializing built-in extension XC-MISC
[    24.181] (II) Initializing built-in extension SECURITY
[    24.181] (II) Initializing built-in extension XINERAMA
[    24.181] (II) Initializing built-in extension XFIXES
[    24.181] (II) Initializing built-in extension RENDER
[    24.181] (II) Initializing built-in extension RANDR
[    24.181] (II) Initializing built-in extension COMPOSITE
[    24.181] (II) Initializing built-in extension DAMAGE
[    24.193] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    24.193] (II) AIGLX: enabled GLX_INTEL_swap_event
[    24.193] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    24.193] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    24.193] (II) AIGLX: Loaded and initialized i965
[    24.193] (II) GLX: Initialized DRI2 GL provider for screen 0
[    24.193] (II) intel(0): Setting screen physical size to 338 x 211
[    24.202] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    24.206] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    24.206] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    24.206] (II) LoadModule: "evdev"
[    24.207] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    24.207] (II) Module evdev: vendor="X.Org Foundation"
[    24.207] compiled for 1.11.3, module version = 2.7.0
[    24.207] Module class: X.Org XInput Driver
[    24.207] ABI class: X.Org XInput driver, version 16.0
[    24.207] (II) Using input driver 'evdev' for 'Power Button'
[    24.207] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    24.207] (**) Power Button: always reports core events
[    24.207] (**) evdev: Power Button: Device: "/dev/input/event2"
[    24.207] (--) evdev: Power Button: Vendor 0 Product 0x1
[    24.207] (--) evdev: Power Button: Found keys
[    24.207] (II) evdev: Power Button: Configuring as keyboard
[    24.207] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    24.207] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    24.207] (**) Option "xkb_rules" "evdev"
[    24.207] (**) Option "xkb_model" "pc105"
[    24.207] (**) Option "xkb_layout" "cz"
[    24.210] (II) XKB: reuse xkmfile /var/lib/xkb/server-583B992BBA3776030BA62AC94FC7F0AE9B04119F.xkm
[    24.211] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    24.211] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    24.211] (II) Using input driver 'evdev' for 'Video Bus'
[    24.211] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    24.211] (**) Video Bus: always reports core events
[    24.211] (**) evdev: Video Bus: Device: "/dev/input/event5"
[    24.211] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    24.211] (--) evdev: Video Bus: Found keys
[    24.211] (II) evdev: Video Bus: Configuring as keyboard
[    24.211] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5/event5"
[    24.211] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    24.211] (**) Option "xkb_rules" "evdev"
[    24.211] (**) Option "xkb_model" "pc105"
[    24.211] (**) Option "xkb_layout" "cz"
[    24.212] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    24.212] (II) No input driver specified, ignoring this device.
[    24.212] (II) This device may have been added with another device file.
[    24.212] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[    24.212] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    24.212] (II) Using input driver 'evdev' for 'Sleep Button'
[    24.212] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    24.212] (**) Sleep Button: always reports core events
[    24.212] (**) evdev: Sleep Button: Device: "/dev/input/event0"
[    24.212] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    24.212] (--) evdev: Sleep Button: Found keys
[    24.212] (II) evdev: Sleep Button: Configuring as keyboard
[    24.212] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0/event0"
[    24.212] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    24.212] (**) Option "xkb_rules" "evdev"
[    24.212] (**) Option "xkb_model" "pc105"
[    24.212] (**) Option "xkb_layout" "cz"
[    24.213] (II) config/udev: Adding input device Primax USB OPTICAL MOUSE (/dev/input/event4)
[    24.213] (**) Primax USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[    24.213] (II) Using input driver 'evdev' for 'Primax USB OPTICAL MOUSE'
[    24.213] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    24.213] (**) Primax USB OPTICAL MOUSE: always reports core events
[    24.213] (**) evdev: Primax USB OPTICAL MOUSE: Device: "/dev/input/event4"
[    24.213] (--) evdev: Primax USB OPTICAL MOUSE: Vendor 0x461 Product 0x4de3
[    24.213] (--) evdev: Primax USB OPTICAL MOUSE: Found 9 mouse buttons
[    24.213] (--) evdev: Primax USB OPTICAL MOUSE: Found scroll wheel(s)
[    24.213] (--) evdev: Primax USB OPTICAL MOUSE: Found relative axes
[    24.213] (--) evdev: Primax USB OPTICAL MOUSE: Found x and y relative axes
[    24.213] (II) evdev: Primax USB OPTICAL MOUSE: Configuring as mouse
[    24.213] (II) evdev: Primax USB OPTICAL MOUSE: Adding scrollwheel support
[    24.213] (**) evdev: Primax USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[    24.213] (**) evdev: Primax USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    24.213] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.0/input/input4/event4"
[    24.213] (II) XINPUT: Adding extended input device "Primax USB OPTICAL MOUSE" (type: MOUSE, id 9)
[    24.214] (II) evdev: Primax USB OPTICAL MOUSE: initialized for relative axes.
[    24.214] (**) Primax USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[    24.214] (**) Primax USB OPTICAL MOUSE: (accel) acceleration profile 0
[    24.214] (**) Primax USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[    24.214] (**) Primax USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[    24.214] (II) config/udev: Adding input device Primax USB OPTICAL MOUSE (/dev/input/mouse0)
[    24.214] (II) No input driver specified, ignoring this device.
[    24.214] (II) This device may have been added with another device file.
[    24.215] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    24.215] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    24.215] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    24.215] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    24.215] (**) AT Translated Set 2 keyboard: always reports core events
[    24.215] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[    24.215] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    24.215] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    24.215] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    24.215] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    24.215] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[    24.215] (**) Option "xkb_rules" "evdev"
[    24.215] (**) Option "xkb_model" "pc105"
[    24.215] (**) Option "xkb_layout" "cz"
[    24.216] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[    24.216] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    24.216] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    24.216] (II) LoadModule: "synaptics"
[    24.216] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    24.216] (II) Module synaptics: vendor="X.Org Foundation"
[    24.216] compiled for 1.11.3, module version = 1.6.2
[    24.216] Module class: X.Org XInput Driver
[    24.216] ABI class: X.Org XInput driver, version 16.0
[    24.216] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    24.216] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    24.216] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    24.216] (**) Option "Device" "/dev/input/event6"
[    24.241] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[    24.241] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[    24.241] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    24.241] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    24.241] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right
[    24.241] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    24.241] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    24.241] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    24.264] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input6/event6"
[    24.264] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[    24.264] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    24.264] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    24.264] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
[    24.264] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    24.264] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    24.264] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    24.264] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    24.264] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    24.265] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[    24.265] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    24.267] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event7)
[    24.267] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    24.267] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[    24.267] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    24.267] (**) HP WMI hotkeys: always reports core events
[    24.267] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event7"
[    24.267] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[    24.267] (--) evdev: HP WMI hotkeys: Found keys
[    24.267] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[    24.267] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"
[    24.267] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 12)
[    24.267] (**) Option "xkb_rules" "evdev"
[    24.267] (**) Option "xkb_model" "pc105"
[    24.267] (**) Option "xkb_layout" "cz"
[    26.125] (II) intel(0): EDID vendor "AUO", prod id 32884
[    26.125] (II) intel(0): Printing DDC gathered Modelines:
[    26.125] (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1360 1415  800 803 809 816 -hsync -vsync (49.0 kHz)
[    29.046] (II) intel(0): EDID vendor "AUO", prod id 32884
[    29.046] (II) intel(0): Printing DDC gathered Modelines:
[    29.046] (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1360 1415  800 803 809 816 -hsync -vsync (49.0 kHz)
[    30.631] (II) intel(0): EDID vendor "AUO", prod id 32884
[    30.631] (II) intel(0): Printing DDC gathered Modelines:
[    30.631] (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1360 1415  800 803 809 816 -hsync -vsync (49.0 kHz)
[    37.471] (II) XKB: reuse xkmfile /var/lib/xkb/server-03AF3717FF3AB439A4BAABA686CCB40771CDF520.xkm
[    51.584] (II) intel(0): EDID vendor "AUO", prod id 32884
[    51.584] (II) intel(0): Printing DDC gathered Modelines:
[    51.584] (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1360 1415  800 803 809 816 -hsync -vsync (49.0 kHz)


Myslím, že klíčové jsou tyto řádky:

Kód: [Vybrat]
...

[    23.367] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    23.367] Entry deleted from font path.
[    23.367] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    23.367] Entry deleted from font path.
[    23.367] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    23.367] Entry deleted from font path.
[    23.367] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    23.367] Entry deleted from font path.
[    23.367] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    23.367] Entry deleted from font path.
[    23.367] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.

...

[    23.434] (WW) Falling back to old probe method for vesa
[    23.434] (WW) Falling back to old probe method for fbdev

...

« Poslední změna: 07 Říjen 2012, 16:15:56 od zzz »

František Zatloukal

  • Závislák
  • ****
  • Příspěvků: 1802
    • Zobrazit profil
    • frantisek.zatloukalu.eu
Re:Problém s ovladačem grafické karty u HP Compaq 6720s
« Odpověď #1 kdy: 06 Říjen 2012, 21:14:23 »
Toto ovladačem není. Mám takový pocit, že jde spíše o swapování ;)
Zkus využít prostředí Unity 2D, popř. xfce. Můžeš také upravit hodnotu swapiness ( http://askubuntu.com/questions/103915/how-do-i-configure-swappiness ).

Grafické karty Intel (až na GMA 500 Poulsbo) žádný další ovladač nepotřebují.
First they ignore you, then they laugh at you,
then they fight you, then you win.
Powered by Fedora 22 | Ubuntu 15.10

zzz

  • Návštěvník
  • *
  • Příspěvků: 5
    • Zobrazit profil
Re:Problém s ovladačem grafické karty u HP Compaq 6720s
« Odpověď #2 kdy: 06 Říjen 2012, 21:20:54 »
Díky,

trochu si o tom přečtu a ještě se ozvu...

zzz

  • Návštěvník
  • *
  • Příspěvků: 5
    • Zobrazit profil
Re:Problém s ovladačem grafické karty u HP Compaq 6720s
« Odpověď #3 kdy: 07 Říjen 2012, 16:07:04 »
Toto ovladačem není. Mám takový pocit, že jde spíše o swapování ;)
Zkus využít prostředí Unity 2D, popř. xfce. Můžeš také upravit hodnotu swapiness ( http://askubuntu.com/questions/103915/how-do-i-configure-swappiness ).

Grafické karty Intel (až na GMA 500 Poulsbo) žádný další ovladač nepotřebují.

Mnohokrát děkuji,

zdá se, že problém byl vyřešen:

Jednalo se tedy zřejmě o problém se swapováním.

Nejdříve jsem si zvětšil swapovací oddíl (linux-swap) na dvojnásobek operační paměti. V mém případě 1,9 GB RAM, tedy 3,8 GB z původních 1,9 GB a poté změnil hodnotu swapování.  Tady jsou základní kroky:

  • Nabootoval jsem systém z Live USB
  • Zvolil možnost "vyzkoušet Ubuntu bez instalace"
  • Pomocí správce oddílů GParted jsem zmenšil hlavní oddíl o 1,9 GB RAM - tedy abych uvolnil místo pro zvětšení swapovacího oddílu
  • Swapovací oddíl jsem deaktivoval a zvětšil na 3,8 GB
  • Znovu jsem aktivoval swapovací oddíl
  • Použil provedené změny
  • Restartoval PC
  • Změnil hodnotu swapování na 20
  • Restartoval PC

Všechny podrobnosti najdete na http://askubuntu.com/questions/103915/how-do-i-configure-swappiness - jak avizoval kolega,

nebo také na  https://help.ubuntu.com/community/SwapFaq.

Od této změny se mi tyto problémy nedostavily, nicméně, ještě počkám jestli se v nějaké situaci neobjeví a případně se ozvu.