jaký ovladače pro AMD (ATI) grafiku?

[JARDA001]

tak to bude asi jak jsem řekl dle tý věty hned nahoře http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-73678
takže by to mohlo jít aj pořešit tu v linuxu ne?

nešlo by to třeba stažením ovladačů z intellinuxgraphic.com

[sabraq]

K té instalaci fglrx - je lepší to udělat podle jejich návodu a vytvořit .deb balíčky a instalovat až z nich:

Kód: [Vybrat]

sudo sh ./ati-driver-installer-11-5-x86.x86_64.run --buildpkg Ubuntu/natty
protože pak o této instalaci "ví" apt a máš ošetřené závislosti pro případné konflikty...

V tom odkazu cos poslal je pro stažení pouze verze pro windows...Jistě, bylo to řízený z vidlí, jak píšeš..vidlím ovladačem . Ale dle tvého lspci ten hw vůbec nevidí, což by mohlo znamenat, že ho nezná kernel..Ale to by v tom výpise bylo číslo sběrnice a něco jako unknown device, nebo tak něco..

[JARDA001]

díky:) dobrej tip, zkusim večer bo zejtra.

vím že je to na widle, to jenom pro ukázku, proto jsem myslel že by to mohl pořešit ten ovladač pro linux ale to co píšeš dále mě nenapadlo:/ co to podle tebe znamená že to nemá příznaky toho ani toho? nevim co si o tom mám myslet a hlavně ani jak to řešit:(

[JARDA001]

teď jsem zjistil že mam nainstalovanej balík intel-gpu-tools a při zadání intel_gpu_dump do konsole to napíše:

Kód: [Vybrat]

intel_gpu_dump: Couldn't find graphics card takže chyba bude jinde, jak říkáš, ale kde

[sabraq]

To mi taky není jasný..

Já  za chvíli odcházím, prohledej fórum pro přenosné pc a přes googleten typ procesoru, případně celého notesu...zkus přímo google.com/linux

[sabraq]

Protože pokud by tam nebyla ta integrovaná grafika zapnutá, neměl by být problém s tou dedikovanou...

zatím

[JARDA001]

dobře, díky:)
mno vzhledem k otmu že ovladače přesně na můj typ jdou stáhnout tam zamčenej v biosu asi nebude, leda že by se to zamklo v případě že by zjistil jinej OS ale to nevim jestli je možný...
zatim se měj

[JARDA001]

jsem teď zkusil stáhnout fedoru live a ta ani v 15 verzi nevidí nic navíc, výpis z lspci má pořád 26 položek, tak nevim kde je problém:/ napadá někoho něco?

[JARDA001]

nenapadá někoho nic? prosím aspoň jak to uchladit když ne přepínat

[sabraq]

Kde začít?

Můžeš sem dát do code výpis dmesg a xorg.0.log? Jsou ve var/log/ nebo přes Systém->Správa->Prohlížeš souborů protokolů..

[JARDA001]

buď zdráv

tak výpis z dmesg (část 1):

Kód: [Vybrat]

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.38-8-generic (buildd@allspice) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 03:31:24 UTC 2011 (Ubuntu 2.6.38-8.42-generic 2.6.38.2)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=7c77ab73-30c9-423d-8c95-8adfe6b10b15 ro crashkernel=384M-2G:64M,2G-:128M quiet splash vt.handoff=7
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009c400 (usable)
[    0.000000]  BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bf27c000 (usable)
[    0.000000]  BIOS-e820: 00000000bf27c000 - 00000000bf282000 (reserved)
[    0.000000]  BIOS-e820: 00000000bf282000 - 00000000bf3ed000 (usable)
[    0.000000]  BIOS-e820: 00000000bf3ed000 - 00000000bf40f000 (reserved)
[    0.000000]  BIOS-e820: 00000000bf40f000 - 00000000bf46f000 (usable)
[    0.000000]  BIOS-e820: 00000000bf46f000 - 00000000bf470000 (reserved)
[    0.000000]  BIOS-e820: 00000000bf470000 - 00000000bf4f1000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bf4f1000 - 00000000bf70f000 (reserved)
[    0.000000]  BIOS-e820: 00000000bf70f000 - 00000000bf717000 (usable)
[    0.000000]  BIOS-e820: 00000000bf717000 - 00000000bf71f000 (reserved)
[    0.000000]  BIOS-e820: 00000000bf71f000 - 00000000bf77f000 (usable)
[    0.000000]  BIOS-e820: 00000000bf77f000 - 00000000bf79f000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bf79f000 - 00000000bf7e2000 (usable)
[    0.000000]  BIOS-e820: 00000000bf7e2000 - 00000000bf7ff000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bf7ff000 - 00000000bf800000 (usable)
[    0.000000]  BIOS-e820: 00000000bf800000 - 00000000c0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f080a000 - 00000000f080b000 (reserved)
[    0.000000]  BIOS-e820: 00000000feaff000 - 00000000feb00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI present.
[    0.000000] DMI: LENOVO 0578KNG/0578KNG, BIOS 80ET49WW (1.26 ) 04/13/2011
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x138000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-D3FFF write-protect
[    0.000000]   D4000-DBFFF uncachable
[    0.000000]   DC000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 disabled
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 100000000 mask FC0000000 write-back
[    0.000000]   4 base 138000000 mask FF8000000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000f6760] f6760
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] init_memory_mapping: 0000000000000000-00000000bf800000
[    0.000000]  0000000000 - 00bf800000 page 2M
[    0.000000] kernel direct mapping tables up to bf800000 @ 1fffc000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-0000000138000000
[    0.000000]  0100000000 - 0138000000 page 2M
[    0.000000] kernel direct mapping tables up to 138000000 @ bf7dc000-bf7e2000
[    0.000000] RAMDISK: 35b5e000 - 36da7000
[    0.000000] Reserving 128MB of memory at 720MB for crashkernel (System RAM: 4992MB)
[    0.000000] ACPI: RSDP 00000000000f6410 00024 (v04 LENOVO)
[    0.000000] ACPI: XSDT 00000000bf7f3bb8 0005C (v01 LENOVO TP-80    00001260  LTP 00000000)
[    0.000000] ACPI: FACP 00000000bf7e4000 000F4 (v03 LENOVO TP-80    00001260 PTEC 00000001)
[    0.000000] ACPI: DSDT 00000000bf7e5000 0AFB6 (v02 LENOVO TP-80    00001260 INTL 20050624)
[    0.000000] ACPI: FACS 00000000bf79bfc0 00040
[    0.000000] ACPI: HPET 00000000bf7fed6a 00038 (v01 LENOVO TP-80    00001260 PTEC 00000001)
[    0.000000] ACPI: MCFG 00000000bf7feda2 0003C (v01 LENOVO TP-80    00001260 PTEC 00000001)
[    0.000000] ACPI: APIC 00000000bf7fedde 00084 (v01 LENOVO TP-80    00001260  LTP 00000000)
[    0.000000] ACPI: BOOT 00000000bf7fee62 00028 (v01 LENOVO TP-80    00001260  LTP 00000001)
[    0.000000] ACPI: SLIC 00000000bf7fee8a 00176 (v01 LENOVO TP-80    00001260  LTP 00000000)
[    0.000000] ACPI: SSDT 00000000bf7e3000 009F1 (v01  PmRef    CpuPm 00003000 INTL 20050624)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000138000000
[    0.000000] Initmem setup node 0 0000000000000000-0000000138000000
[    0.000000]   NODE_DATA [0000000137ffb000 - 0000000137ffffff]
[    0.000000]  [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880134000000-ffff8801377fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00138000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[9] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009c
[    0.000000]     0: 0x00000100 -> 0x000bf27c
[    0.000000]     0: 0x000bf282 -> 0x000bf3ed
[    0.000000]     0: 0x000bf40f -> 0x000bf46f
[    0.000000]     0: 0x000bf70f -> 0x000bf717
[    0.000000]     0: 0x000bf71f -> 0x000bf77f
[    0.000000]     0: 0x000bf79f -> 0x000bf7e2
[    0.000000]     0: 0x000bf7ff -> 0x000bf800
[    0.000000]     0: 0x00100000 -> 0x00138000
[    0.000000] On node 0 totalpages: 1012863
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 6 pages reserved
[    0.000000]   DMA zone: 3918 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 765227 pages, LIFO batch:31
[    0.000000]   Normal zone: 3136 pages used for memmap
[    0.000000]   Normal zone: 226240 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000bf27c000 - 00000000bf282000
[    0.000000] PM: Registered nosave memory: 00000000bf3ed000 - 00000000bf40f000
[    0.000000] PM: Registered nosave memory: 00000000bf46f000 - 00000000bf470000
[    0.000000] PM: Registered nosave memory: 00000000bf470000 - 00000000bf4f1000
[    0.000000] PM: Registered nosave memory: 00000000bf4f1000 - 00000000bf70f000
[    0.000000] PM: Registered nosave memory: 00000000bf717000 - 00000000bf71f000
[    0.000000] PM: Registered nosave memory: 00000000bf77f000 - 00000000bf79f000
[    0.000000] PM: Registered nosave memory: 00000000bf7e2000 - 00000000bf7ff000
[    0.000000] PM: Registered nosave memory: 00000000bf800000 - 00000000c0000000
[    0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f080a000
[    0.000000] PM: Registered nosave memory: 00000000f080a000 - 00000000f080b000
[    0.000000] PM: Registered nosave memory: 00000000f080b000 - 00000000feaff000
[    0.000000] PM: Registered nosave memory: 00000000feaff000 - 00000000feb00000
[    0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[    0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
[    0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
[    0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[    0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800bf000000 s84416 r8192 d22080 u524288
[    0.000000] pcpu-alloc: s84416 r8192 d22080 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 995385
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=7c77ab73-30c9-423d-8c95-8adfe6b10b15 ro crashkernel=384M-2G:64M,2G-:128M quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3764360k/5111808k available (5940k kernel code, 1060356k absent, 287092k reserved, 5017k data, 956k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] RCU-based detection of stalled CPUs is disabled.
[    0.000000] NR_IRQS:16640 nr_irqs:712 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 40632320 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.010000] Detected 2526.981 MHz processor.
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.96 BogoMIPS (lpj=25269810)
[    0.000006] pid_max: default: 32768 minimum: 301
[    0.000028] Security Framework initialized
[    0.000040] AppArmor: AppArmor initialized
[    0.000041] Yama: becoming mindful.
[    0.000371] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.001678] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.002253] Mount-cache hash table entries: 256
[    0.002360] Initializing cgroup subsys ns
[    0.002364] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[    0.002365] Initializing cgroup subsys cpuacct
[    0.002369] Initializing cgroup subsys memory
[    0.002374] Initializing cgroup subsys devices
[    0.002376] Initializing cgroup subsys freezer
[    0.002378] Initializing cgroup subsys net_cls
[    0.002379] Initializing cgroup subsys blkio
[    0.002405] CPU: Physical Processor ID: 0
[    0.002406] CPU: Processor Core ID: 0
[    0.002411] mce: CPU supports 9 MCE banks
[    0.002419] CPU0: Thermal monitoring handled by SMI
[    0.002426] using mwait in idle threads.
[    0.004238] ACPI: Core revision 20110112
[    0.027600] ftrace: allocating 24314 entries in 96 pages
[    0.034555] Setting APIC routing to flat
[    0.034955] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.134906] CPU0: Intel(R) Core(TM) i5 CPU       M 460  @ 2.53GHz stepping 05
[    0.254157] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[    0.254163] ... version:                3
[    0.254164] ... bit width:              48
[    0.254165] ... generic registers:      4
[    0.254166] ... value mask:             0000ffffffffffff
[    0.254167] ... max period:             000000007fffffff
[    0.254168] ... fixed-purpose events:   3
[    0.254169] ... event mask:             000000070000000f
[    0.254577] Booting Node   0, Processors  #1
[    0.414085] CPU1: Thermal monitoring handled by SMI
[    0.434237]  #2
[    0.593983] CPU2: Thermal monitoring handled by SMI
[    0.614170]  #3 Ok.
[    0.773878] CPU3: Thermal monitoring handled by SMI
[    0.793975] Brought up 4 CPUs
[    0.793977] Total of 4 processors activated (20215.70 BogoMIPS).
[    0.795722] devtmpfs: initialized
[    0.796554] print_constraints: dummy:
[    0.796582] Time:  9:50:00  Date: 06/01/11
[    0.796609] NET: Registered protocol family 16
[    0.796700] Trying to unpack rootfs image as initramfs...
[    0.796703] ACPI: bus type pci registered
[    0.796768] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.796770] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.845247] PCI: Using configuration type 1 for base access
[    0.845906] bio: create slab <bio-0> at 0
[    0.847551] ACPI: EC: Look up EC in DSDT
[    0.852852] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.853209] ACPI: SSDT 00000000bf71a918 00432 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.853583] ACPI: Dynamic OEM Table Load:
[    0.853585] ACPI: SSDT           (null) 00432 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.853716] ACPI: SSDT 00000000bf718018 00891 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.854074] ACPI: Dynamic OEM Table Load:
[    0.854076] ACPI: SSDT           (null) 00891 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.974045] ACPI: SSDT 00000000bf719a98 00303 (v01  PmRef    ApIst 00003000 INTL 20050624)
[    0.974454] ACPI: Dynamic OEM Table Load:
[    0.974456] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20050624)
[    1.003897] ACPI: SSDT 00000000bf717d98 00119 (v01  PmRef    ApCst 00003000 INTL 20050624)
[    1.004294] ACPI: Dynamic OEM Table Load:
[    1.004296] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20050624)
[    1.067781] ACPI: Interpreter enabled
[    1.067786] ACPI: (supports S0 S3 S4 S5)
[    1.067809] ACPI: Using IOAPIC for interrupt routing
[    1.072745] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[    1.080447] Freeing initrd memory: 18724k freed
[    1.103897] ACPI: No dock devices found.
[    1.103901] HEST: Table not found.
[    1.103905] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.104272] \_SB_.PCI0:_OSC invalid UUID
[    1.104274] _OSC request data:1 8 1f
[    1.104278] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    1.104780] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    1.104782] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    1.104784] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    1.104786] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[    1.104788] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[    1.104789] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[    1.104791] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfeafffff]
[    1.104804] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[    1.104822] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[    1.104837] pci 0000:00:01.0: [8086:0045] type 1 class 0x000604
[    1.104860] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    1.104863] pci 0000:00:01.0: PME# disabled
[    1.104909] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[    1.104935] pci 0000:00:16.0: reg 10: [mem 0xf0804000-0xf080400f 64bit]
[    1.105009] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    1.105014] pci 0000:00:16.0: PME# disabled
[    1.105054] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[    1.105079] pci 0000:00:1a.0: reg 10: [mem 0xf0806000-0xf08063ff]
[    1.105165] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.105169] pci 0000:00:1a.0: PME# disabled
[    1.105198] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[    1.105219] pci 0000:00:1b.0: reg 10: [mem 0xf0800000-0xf0803fff 64bit]
[    1.105295] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.105299] pci 0000:00:1b.0: PME# disabled
[    1.105325] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[    1.105403] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.105407] pci 0000:00:1c.0: PME# disabled
[    1.105434] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
[    1.105511] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    1.105515] pci 0000:00:1c.1: PME# disabled
[    1.105542] pci 0000:00:1c.2: [8086:3b46] type 1 class 0x000604
[    1.105619] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    1.105623] pci 0000:00:1c.2: PME# disabled
[    1.105653] pci 0000:00:1c.3: [8086:3b48] type 1 class 0x000604
[    1.105730] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    1.105734] pci 0000:00:1c.3: PME# disabled
[    1.105763] pci 0000:00:1c.5: [8086:3b4c] type 1 class 0x000604
[    1.105842] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    1.105846] pci 0000:00:1c.5: PME# disabled
[    1.105881] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[    1.105906] pci 0000:00:1d.0: reg 10: [mem 0xf0807000-0xf08073ff]
[    1.105993] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.105997] pci 0000:00:1d.0: PME# disabled
[    1.106020] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    1.106094] pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601
[    1.106211] pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106
[    1.106236] pci 0000:00:1f.2: reg 10: [io  0x1830-0x1837]
[    1.106247] pci 0000:00:1f.2: reg 14: [io  0x1824-0x1827]
[    1.106257] pci 0000:00:1f.2: reg 18: [io  0x1828-0x182f]
[    1.106268] pci 0000:00:1f.2: reg 1c: [io  0x1820-0x1823]
[    1.106278] pci 0000:00:1f.2: reg 20: [io  0x1800-0x181f]
[    1.106289] pci 0000:00:1f.2: reg 24: [mem 0xf0808000-0xf08087ff]
[    1.106336] pci 0000:00:1f.2: PME# supported from D3hot
[    1.106340] pci 0000:00:1f.2: PME# disabled
[    1.106362] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[    1.106382] pci 0000:00:1f.3: reg 10: [mem 0xf0809000-0xf08090ff 64bit]
[    1.106413] pci 0000:00:1f.3: reg 20: [io  0x1840-0x185f]
[    1.106458] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
[    1.106485] pci 0000:00:1f.6: reg 10: [mem 0xf080a000-0xf080afff 64bit]
[    1.106594] pci 0000:01:00.0: [1002:9553] type 0 class 0x000300
[    1.106604] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xdfffffff pref]
[    1.106612] pci 0000:01:00.0: reg 14: [io  0x2000-0x20ff]
[    1.106619] pci 0000:01:00.0: reg 18: [mem 0xf0300000-0xf030ffff]
[    1.106642] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    1.106659] pci 0000:01:00.0: supports D1 D2
[    1.106677] pci 0000:01:00.1: [1002:aa38] type 0 class 0x000403
[    1.106687] pci 0000:01:00.1: reg 10: [mem 0xf0310000-0xf0313fff]
[    1.106735] pci 0000:01:00.1: supports D1 D2
[    1.106769] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    1.106771] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    1.106774] pci 0000:00:01.0:   bridge window [mem 0xf0300000-0xf03fffff]
[    1.106777] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
[    1.106831] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    1.106836] pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
[    1.106841] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    1.106848] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    1.106932] pci 0000:03:00.0: [8086:0084] type 0 class 0x000280
[    1.106970] pci 0000:03:00.0: reg 10: [mem 0xf0500000-0xf0501fff 64bit]
[    1.107117] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    1.107124] pci 0000:03:00.0: PME# disabled
[    1.123689] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    1.123696] pci 0000:00:1c.1:   bridge window [io  0xf000-0x0000] (disabled)
[    1.123704] pci 0000:00:1c.1:   bridge window [mem 0xf0500000-0xf05fffff]
[    1.123714] pci 0000:00:1c.1:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    1.123792] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[    1.123796] pci 0000:00:1c.2:   bridge window [io  0xf000-0x0000] (disabled)
[    1.123801] pci 0000:00:1c.2:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    1.123809] pci 0000:00:1c.2:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    1.123864] pci 0000:00:1c.3: PCI bridge to [bus 05-07]
[    1.123868] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
[    1.123872] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff]
[    1.123879] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[    1.123951] pci 0000:09:00.0: [10ec:8168] type 0 class 0x000200
[    1.123969] pci 0000:09:00.0: reg 10: [io  0x4000-0x40ff]
[    1.123996] pci 0000:09:00.0: reg 18: [mem 0xf0204000-0xf0204fff 64bit pref]
[    1.124013] pci 0000:09:00.0: reg 20: [mem 0xf0200000-0xf0203fff 64bit pref]
[    1.124025] pci 0000:09:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    1.124063] pci 0000:09:00.0: supports D1 D2
[    1.124064] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.124069] pci 0000:09:00.0: PME# disabled
[    1.143668] pci 0000:00:1c.5: PCI bridge to [bus 09-09]
[    1.143676] pci 0000:00:1c.5:   bridge window [io  0x4000-0x4fff]
[    1.143683] pci 0000:00:1c.5:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    1.143694] pci 0000:00:1c.5:   bridge window [mem 0xf0200000-0xf02fffff 64bit pref]
[    1.143796] pci 0000:00:1e.0: PCI bridge to [bus 0c-0c] (subtractive decode)
[    1.143800] pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
[    1.143805] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    1.143812] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    1.143814] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    1.143816] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    1.143817] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    1.143819] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    1.143821] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    1.143823] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    1.143824] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfeafffff] (subtractive decode)


[JARDA001]

dmesg (část dva):

Kód: [Vybrat]

[    1.143862] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    1.144016] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[    1.144067] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    1.144174] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    1.144220] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    1.144267] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    1.144312] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    1.144358] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[    1.144445] \_SB_.PCI0:_OSC invalid UUID
[    1.144446] _OSC request data:1 1f 1f
[    1.144450]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    1.144478] \_SB_.PCI0:_OSC invalid UUID
[    1.144479] _OSC request data:1 0 1d
[    1.148422] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[    1.148482] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600
[    1.148499] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
[    1.148517] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
[    1.148532] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
[    1.148548] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
[    1.148563] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
[    1.148591]  pci0000:ff: Requesting ACPI _OSC control (0x1d)
[    1.148785] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    1.148826] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    1.148865] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    1.148903] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    1.148942] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    1.148981] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    1.149020] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    1.149058] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    1.149155] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    1.149160] vgaarb: loaded
[    1.149291] SCSI subsystem initialized
[    1.149345] libata version 3.00 loaded.
[    1.149378] usbcore: registered new interface driver usbfs
[    1.149391] usbcore: registered new interface driver hub
[    1.149412] usbcore: registered new device driver usb
[    1.149489] wmi: Mapper loaded
[    1.149490] PCI: Using ACPI for IRQ routing
[    1.149492] PCI: pci_cache_line_size set to 64 bytes
[    1.149577] reserve RAM buffer: 000000000009c400 - 000000000009ffff
[    1.149579] reserve RAM buffer: 00000000bf27c000 - 00000000bfffffff
[    1.149582] reserve RAM buffer: 00000000bf3ed000 - 00000000bfffffff
[    1.149585] reserve RAM buffer: 00000000bf46f000 - 00000000bfffffff
[    1.149588] reserve RAM buffer: 00000000bf717000 - 00000000bfffffff
[    1.149590] reserve RAM buffer: 00000000bf77f000 - 00000000bfffffff
[    1.149592] reserve RAM buffer: 00000000bf7e2000 - 00000000bfffffff
[    1.149593] reserve RAM buffer: 00000000bf800000 - 00000000bfffffff
[    1.149671] NetLabel: Initializing
[    1.149673] NetLabel:  domain hash size = 128
[    1.149674] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.149685] NetLabel:  unlabeled traffic allowed by default
[    1.149721] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.149725] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.151743] Switching to clocksource hpet
[    1.153656] Switched to NOHz mode on CPU #0
[    1.153742] Switched to NOHz mode on CPU #1
[    1.153765] Switched to NOHz mode on CPU #3
[    1.153775] Switched to NOHz mode on CPU #2
[    1.156866] AppArmor: AppArmor Filesystem Enabled
[    1.156897] pnp: PnP ACPI init
[    1.156912] ACPI: bus type pnp registered
[    1.157209] pnp 00:00: [bus 00-fe]
[    1.157211] pnp 00:00: [io  0x0000-0x0cf7 window]
[    1.157213] pnp 00:00: [io  0x0cf8-0x0cff]
[    1.157214] pnp 00:00: [io  0x0d00-0xffff window]
[    1.157216] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    1.157217] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    1.157218] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    1.157220] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    1.157221] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    1.157223] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    1.157224] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    1.157226] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    1.157227] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    1.157229] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    1.157230] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    1.157232] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    1.157233] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    1.157235] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    1.157236] pnp 00:00: [mem 0xc0000000-0xfeafffff window]
[    1.157238] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    1.157315] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    1.157351] pnp 00:01: [io  0x0000-0x001f]
[    1.157352] pnp 00:01: [io  0x0081-0x0091]
[    1.157354] pnp 00:01: [io  0x0093-0x009f]
[    1.157355] pnp 00:01: [io  0x00c0-0x00df]
[    1.157357] pnp 00:01: [dma 4]
[    1.157377] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.157383] pnp 00:02: [mem 0xff000000-0xffffffff]
[    1.157403] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    1.157476] pnp 00:03: [irq 0 disabled]
[    1.157487] pnp 00:03: [irq 8]
[    1.157489] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    1.157510] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.157518] pnp 00:04: [io  0x00f0]
[    1.157523] pnp 00:04: [irq 13]
[    1.157545] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.157554] pnp 00:05: [io  0x002e-0x002f]
[    1.157555] pnp 00:05: [io  0x004e-0x004f]
[    1.157557] pnp 00:05: [io  0x0061]
[    1.157558] pnp 00:05: [io  0x0063]
[    1.157559] pnp 00:05: [io  0x0065]
[    1.157560] pnp 00:05: [io  0x0067]
[    1.157561] pnp 00:05: [io  0x0070]
[    1.157563] pnp 00:05: [io  0x0080]
[    1.157564] pnp 00:05: [io  0x0092]
[    1.157565] pnp 00:05: [io  0x00b2-0x00b3]
[    1.157568] pnp 00:05: [io  0x0680-0x069f]
[    1.157569] pnp 00:05: [io  0x0500-0x050f]
[    1.157570] pnp 00:05: [io  0x0600-0x0603]
[    1.157571] pnp 00:05: [io  0xffff]
[    1.157573] pnp 00:05: [io  0x0400-0x047f]
[    1.157574] pnp 00:05: [io  0x1180-0x11ff]
[    1.157575] pnp 00:05: [io  0x1600-0x16fe]
[    1.157576] pnp 00:05: [io  0xfe00]
[    1.157578] pnp 00:05: [io  0x0068]
[    1.157579] pnp 00:05: [io  0x006c]
[    1.157580] pnp 00:05: [io  0x0700-0x070f]
[    1.157639] system 00:05: [io  0x0680-0x069f] has been reserved
[    1.157643] system 00:05: [io  0x0500-0x050f] has been reserved
[    1.157644] system 00:05: [io  0x0600-0x0603] has been reserved
[    1.157646] system 00:05: [io  0xffff] has been reserved
[    1.157648] system 00:05: [io  0x0400-0x047f] has been reserved
[    1.157649] system 00:05: [io  0x1180-0x11ff] has been reserved
[    1.157651] system 00:05: [io  0x1600-0x16fe] has been reserved
[    1.157653] system 00:05: [io  0xfe00] has been reserved
[    1.157655] system 00:05: [io  0x0700-0x070f] has been reserved
[    1.157657] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.157684] pnp 00:06: [io  0x06a0-0x06af]
[    1.157685] pnp 00:06: [io  0x06b0-0x06ff]
[    1.157722] system 00:06: [io  0x06a0-0x06af] has been reserved
[    1.157724] system 00:06: [io  0x06b0-0x06ff] has been reserved
[    1.157726] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.157752] pnp 00:07: [io  0x0070-0x0077]
[    1.157774] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.157782] pnp 00:08: [io  0x0060]
[    1.157783] pnp 00:08: [io  0x0064]
[    1.157789] pnp 00:08: [irq 1]
[    1.157811] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.157821] pnp 00:09: [irq 12]
[    1.157843] pnp 00:09: Plug and Play ACPI device, IDs LEN0017 PNP0f13 (active)
[    1.158081] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[    1.158083] pnp 00:0a: [mem 0xfed10000-0xfed13fff]
[    1.158085] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[    1.158086] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[    1.158087] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[    1.158089] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[    1.158091] pnp 00:0a: [mem 0xfeaff000-0xfeafffff]
[    1.158092] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[    1.158093] pnp 00:0a: [mem 0xfed90000-0xfed8ffff disabled]
[    1.158095] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[    1.158096] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
[    1.158098] pnp 00:0a: [mem 0xff000000-0xffffffff]
[    1.158099] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[    1.158151] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.158153] system 00:0a: [mem 0xfed10000-0xfed13fff] has been reserved
[    1.158155] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.158156] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.158158] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[    1.158160] system 00:0a: [mem 0xfeaff000-0xfeafffff] has been reserved
[    1.158162] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.158164] system 00:0a: [mem 0xfed40000-0xfed44fff] has been reserved
[    1.158166] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[    1.158168] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[    1.158169] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.158172] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.158302] pnp 00:0b: [bus ff]
[    1.158336] pnp 00:0b: Plug and Play ACPI device, IDs PNP0a03 (active)
[    1.158669] pnp: PnP ACPI: found 12 devices
[    1.158671] ACPI: ACPI bus type pnp unregistered
[    1.164532] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0600000-0xf07fffff]
[    1.164537] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0900000-0xf0afffff 64bit pref]
[    1.164541] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf0b00000-0xf0cfffff 64bit pref]
[    1.164545] pci 0000:00:1c.2: BAR 14: assigned [mem 0xf0d00000-0xf0efffff]
[    1.164549] pci 0000:00:1c.2: BAR 15: assigned [mem 0xf0f00000-0xf10fffff 64bit pref]
[    1.164553] pci 0000:00:1c.5: BAR 14: assigned [mem 0xf1100000-0xf14fffff]
[    1.164555] pci 0000:00:1c.0: BAR 13: assigned [io  0x5000-0x5fff]
[    1.164558] pci 0000:00:1c.1: BAR 13: assigned [io  0x6000-0x6fff]
[    1.164560] pci 0000:00:1c.2: BAR 13: assigned [io  0x7000-0x7fff]
[    1.164563] pci 0000:01:00.0: BAR 6: assigned [mem 0xf0320000-0xf033ffff pref]
[    1.164565] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    1.164567] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    1.164570] pci 0000:00:01.0:   bridge window [mem 0xf0300000-0xf03fffff]
[    1.164572] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
[    1.164576] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    1.164579] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    1.164584] pci 0000:00:1c.0:   bridge window [mem 0xf0600000-0xf07fffff]
[    1.164589] pci 0000:00:1c.0:   bridge window [mem 0xf0900000-0xf0afffff 64bit pref]
[    1.164597] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    1.164600] pci 0000:00:1c.1:   bridge window [io  0x6000-0x6fff]
[    1.164605] pci 0000:00:1c.1:   bridge window [mem 0xf0500000-0xf05fffff]
[    1.164610] pci 0000:00:1c.1:   bridge window [mem 0xf0b00000-0xf0cfffff 64bit pref]
[    1.164617] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[    1.164620] pci 0000:00:1c.2:   bridge window [io  0x7000-0x7fff]
[    1.164626] pci 0000:00:1c.2:   bridge window [mem 0xf0d00000-0xf0efffff]
[    1.164630] pci 0000:00:1c.2:   bridge window [mem 0xf0f00000-0xf10fffff 64bit pref]
[    1.164637] pci 0000:00:1c.3: PCI bridge to [bus 05-07]
[    1.164640] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
[    1.164646] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff]
[    1.164651] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[    1.164658] pci 0000:09:00.0: BAR 6: assigned [mem 0xf0220000-0xf023ffff pref]
[    1.164660] pci 0000:00:1c.5: PCI bridge to [bus 09-09]
[    1.164663] pci 0000:00:1c.5:   bridge window [io  0x4000-0x4fff]
[    1.164668] pci 0000:00:1c.5:   bridge window [mem 0xf1100000-0xf14fffff]
[    1.164673] pci 0000:00:1c.5:   bridge window [mem 0xf0200000-0xf02fffff 64bit pref]
[    1.164681] pci 0000:00:1e.0: PCI bridge to [bus 0c-0c]
[    1.164682] pci 0000:00:1e.0:   bridge window [io  disabled]
[    1.164687] pci 0000:00:1e.0:   bridge window [mem disabled]
[    1.164692] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    1.164709] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.164712] pci 0000:00:01.0: setting latency timer to 64
[    1.164718] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.164723] pci 0000:00:1c.0: setting latency timer to 64
[    1.164731] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.164736] pci 0000:00:1c.1: setting latency timer to 64
[    1.164745] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.164749] pci 0000:00:1c.2: setting latency timer to 64
[    1.164758] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.164763] pci 0000:00:1c.3: setting latency timer to 64
[    1.164769] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.164774] pci 0000:00:1c.5: setting latency timer to 64
[    1.164781] pci 0000:00:1e.0: setting latency timer to 64
[    1.164785] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.164787] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.164789] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.164790] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[    1.164792] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[    1.164793] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
[    1.164795] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfeafffff]
[    1.164797] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    1.164798] pci_bus 0000:01: resource 1 [mem 0xf0300000-0xf03fffff]
[    1.164800] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
[    1.164802] pci_bus 0000:02: resource 0 [io  0x5000-0x5fff]
[    1.164803] pci_bus 0000:02: resource 1 [mem 0xf0600000-0xf07fffff]
[    1.164805] pci_bus 0000:02: resource 2 [mem 0xf0900000-0xf0afffff 64bit pref]
[    1.164807] pci_bus 0000:03: resource 0 [io  0x6000-0x6fff]
[    1.164808] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff]
[    1.164810] pci_bus 0000:03: resource 2 [mem 0xf0b00000-0xf0cfffff 64bit pref]
[    1.164811] pci_bus 0000:04: resource 0 [io  0x7000-0x7fff]
[    1.164813] pci_bus 0000:04: resource 1 [mem 0xf0d00000-0xf0efffff]
[    1.164814] pci_bus 0000:04: resource 2 [mem 0xf0f00000-0xf10fffff 64bit pref]
[    1.164816] pci_bus 0000:05: resource 0 [io  0x3000-0x3fff]
[    1.164818] pci_bus 0000:05: resource 1 [mem 0xf0400000-0xf04fffff]
[    1.164819] pci_bus 0000:05: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[    1.164821] pci_bus 0000:09: resource 0 [io  0x4000-0x4fff]
[    1.164823] pci_bus 0000:09: resource 1 [mem 0xf1100000-0xf14fffff]
[    1.164824] pci_bus 0000:09: resource 2 [mem 0xf0200000-0xf02fffff 64bit pref]
[    1.164826] pci_bus 0000:0c: resource 4 [io  0x0000-0x0cf7]
[    1.164828] pci_bus 0000:0c: resource 5 [io  0x0d00-0xffff]
[    1.164829] pci_bus 0000:0c: resource 6 [mem 0x000a0000-0x000bffff]
[    1.164831] pci_bus 0000:0c: resource 7 [mem 0x000d4000-0x000d7fff]
[    1.164832] pci_bus 0000:0c: resource 8 [mem 0x000d8000-0x000dbfff]
[    1.164834] pci_bus 0000:0c: resource 9 [mem 0x000dc000-0x000dffff]
[    1.164835] pci_bus 0000:0c: resource 10 [mem 0xc0000000-0xfeafffff]
[    1.164862] NET: Registered protocol family 2
[    1.164980] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.165811] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    1.168071] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.168360] TCP: Hash tables configured (established 524288 bind 65536)
[    1.168362] TCP reno registered
[    1.168371] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    1.168398] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    1.168500] NET: Registered protocol family 1
[    1.168611] pci 0000:01:00.0: Boot video device
[    1.168631] PCI: CLS 64 bytes, default 64
[    1.168633] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.168635] Placing 64MB software IO TLB between ffff8800bae7a000 - ffff8800bee7a000
[    1.168637] software IO TLB at phys 0xbae7a000 - 0xbee7a000
[    1.168670] Simple Boot Flag at 0x36 set to 0x1
[    1.169067] audit: initializing netlink socket (disabled)
[    1.169075] type=2000 audit(1306921801.000:1): initialized
[    1.179705] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.181063] VFS: Disk quotas dquot_6.5.2
[    1.181105] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.181589] fuse init (API version 7.16)
[    1.181658] msgmni has been set to 7388
[    1.181887] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.181912] io scheduler noop registered
[    1.181914] io scheduler deadline registered
[    1.181943] io scheduler cfq registered (default)
[    1.182030] pcieport 0000:00:01.0: setting latency timer to 64
[    1.182057] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    1.182360] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.182375] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.182408] intel_idle: MWAIT substates: 0x1120
[    1.182409] intel_idle: v0.4 model 0x25
[    1.182411] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.282326] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.382405] ACPI: AC Adapter [ACAD] (on-line)
[    1.382488] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    1.401681] ACPI: Lid Switch [LID]
[    1.401754] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    1.401758] ACPI: Power Button [PWRB]
[    1.401789] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.401792] ACPI: Power Button [PWRF]
[    1.401960] ACPI: acpi_idle yielding to intel_idle
[    1.410859] thermal LNXTHERM:00: registered as thermal_zone0
[    1.410861] ACPI: Thermal Zone [TZ00] (79 C)
[    1.410880] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.410913] ERST: Table is not found!
[    1.410968] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.470102] ACPI: Battery Slot [BAT1] (battery present)
[    1.486026] Linux agpgart interface v0.103
[    1.486874] brd: module loaded
[    1.487238] loop: module loaded
[    1.487300] i2c-core: driver [adp5520] using legacy suspend method
[    1.487301] i2c-core: driver [adp5520] using legacy resume method
[    1.487568] Fixed MDIO Bus: probed
[    1.487588] PPP generic driver version 2.4.2
[    1.487616] tun: Universal TUN/TAP device driver, 1.6
[    1.487617] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.487678] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.487695] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.487717] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.487720] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    1.487750] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.487801] ehci_hcd 0000:00:1a.0: debug port 2
[    1.491699] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    1.491718] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf0806000
[    1.511573] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.511721] hub 1-0:1.0: USB hub found
[    1.511725] hub 1-0:1.0: 3 ports detected
[    1.511786] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.511798] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.511801] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    1.511828] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.511877] ehci_hcd 0000:00:1d.0: debug port 2
[    1.515750] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    1.515762] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf0807000
[    1.531564] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.531705] hub 2-0:1.0: USB hub found
[    1.531707] hub 2-0:1.0: 3 ports detected
[    1.531758] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.531767] uhci_hcd: USB Universal Host Controller Interface driver
[    1.531839] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.533862] i8042: Detected active multiplexing controller, rev 1.1
[    1.536656] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.536662] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.536684] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.536700] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.536716] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.536790] mousedev: PS/2 mouse device common for all mice
[    1.536896] rtc_cmos 00:07: RTC can wake from S4
[    1.536950] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    1.536979] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.537051] device-mapper: uevent: version 1.0.3
[    1.537106] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[    1.537165] device-mapper: multipath: version 1.2.0 loaded
[    1.537167] device-mapper: multipath round-robin: version 1.0.0 loaded
[    1.537329] cpuidle: using governor ladder
[    1.537440] cpuidle: using governor menu
[    1.537624] TCP cubic registered
[    1.537710] NET: Registered protocol family 10
[    1.538072] NET: Registered protocol family 17
[    1.538084] Registering the dns_resolver key type
[    1.539860] PM: Hibernation image not present or could not be loaded.
[    1.539904] registered taskstats version 1
[    1.540510]   Magic number: 15:812:827
[    1.540673] rtc_cmos 00:07: setting system clock to 2011-06-01 09:50:01 UTC (1306921801)
[    1.540675] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.540676] EDD information not available.
[    1.542565] Freeing unused kernel memory: 956k freed
[    1.542717] Write protecting the kernel read-only data: 10240k
[    1.543513] Freeing unused kernel memory: 184k freed
[    1.547860] Freeing unused kernel memory: 1444k freed
[    1.567928] <30>udev[73]: starting version 167
[    1.588329] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.779316] acpi device:02: registered as cooling_device4
[    1.779376] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input4
[    1.779435] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    1.817024] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.817053] r8169 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.817104] r8169 0000:09:00.0: setting latency timer to 64
[    1.817168] r8169 0000:09:00.0: irq 41 for MSI/MSI-X
[    1.817701] r8169 0000:09:00.0: eth0: RTL8168d/8111d at 0xffffc90000664000, c8:0a:a9:63:52:0c, XID 083000c0 IRQ 41
[    1.818428] [drm] Initialized drm 1.1.0 20060810
[    1.831418] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    1.834528] ahci 0000:00:1f.2: version 3.0
[    1.834543] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.834599] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[    1.834638] ahci: SSS flag set, parallel bus scan disabled
[    1.834683] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    1.834686] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[    1.834690] ahci 0000:00:1f.2: setting latency timer to 64
[    1.856068] [drm] radeon defaulting to kernel modesetting.
[    1.856071] [drm] radeon kernel modesetting enabled.
[    1.856119] radeon 0000:01:00.0: power state changed by ACPI to D0
[    1.856123] radeon 0000:01:00.0: power state changed by ACPI to D0
[    1.856132] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.856136] radeon 0000:01:00.0: setting latency timer to 64
[    1.857475] [drm] initializing kernel modesetting (RV710 0x1002:0x9553).
[    1.857519] [drm] register mmio base: 0xF0300000
[    1.857521] [drm] register mmio size: 65536
[    1.857658] ATOM BIOS: BR40526.001
[    1.857681] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[    1.857683] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[    1.858742] [drm] Detected VRAM RAM=512M, BAR=512M
[    1.858746] [drm] RAM width 64bits DDR
[    1.858856] [TTM] Zone  kernel: Available graphics memory: 1892834 kiB.
[    1.858859] [TTM] Initializing pool allocator.
[    1.858888] [drm] radeon: 512M of VRAM memory ready
[    1.858892] [drm] radeon: 512M of GTT memory ready.
[    1.858918] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    1.858921] [drm] Driver supports precise vblank timestamp query.
[    1.858987] radeon 0000:01:00.0: irq 43 for MSI/MSI-X
[    1.858993] radeon 0000:01:00.0: radeon: using MSI.
[    1.859024] [drm] radeon: irq initialized.
[    1.859027] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    1.859507] [drm] Loading RV710 Microcode
[    1.865838] radeon 0000:01:00.0: WB enabled
[    1.892063] scsi0 : ahci
[    1.892196] scsi1 : ahci
[    1.892280] scsi2 : ahci
[    1.892361] scsi3 : ahci
[    1.892439] scsi4 : ahci
[    1.892519] scsi5 : ahci
[    1.892713] ata1: SATA max UDMA/133 abar m2048@0xf0808000 port 0xf0808100 irq 42
[    1.892716] ata2: SATA max UDMA/133 abar m2048@0xf0808000 port 0xf0808180 irq 42
[    1.892718] ata3: DUMMY
[    1.892719] ata4: DUMMY
[    1.892721] ata5: SATA max UDMA/133 abar m2048@0xf0808000 port 0xf0808300 irq 42
[    1.892724] ata6: SATA max UDMA/133 abar m2048@0xf0808000 port 0xf0808380 irq 42
[    1.912533] [drm] ring test succeeded in 1 usecs
[    1.912626] [drm] radeon: ib pool ready.
[    1.912822] [drm] ib test succeeded in 0 usecs
[    1.912870] [drm] Enabling audio support
[    1.913082] [drm] Radeon Display Connectors
[    1.913084] [drm] Connector 0:
[    1.913085] [drm]   VGA
[    1.913087] [drm]   DDC: 0x7fa0 0x7fa0 0x7fa4 0x7fa4 0x7fa8 0x7fa8 0x7fac 0x7fac
[    1.913089] [drm]   Encoders:
[    1.913090] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    1.913092] [drm] Connector 1:
[    1.913093] [drm]   HDMI-A
[    1.913094] [drm]   HPD1
[    1.913096] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[    1.913098] [drm]   Encoders:
[    1.913099] [drm]     DFP1: INTERNAL_UNIPHY
[    1.913100] [drm] Connector 2:
[    1.913101] [drm]   LVDS
[    1.913103] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[    1.913104] [drm]   Encoders:
[    1.913105] [drm]     LCD1: INTERNAL_UNIPHY2
[    1.971217] [drm] radeon: power management initialized
[    1.982102] hub 1-1:1.0: USB hub found
[    1.982318] hub 1-1:1.0: 6 ports detected
[    2.101371] usb 2-1: new high speed USB device using ehci_hcd and address 2
[    2.161291] Refined TSC clocksource calibration: 2526.986 MHz.
[    2.161298] Switching to clocksource tsc
[    2.231257] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.232982] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.232985] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    2.233413] ata1.00: ATA-8: WDC WD5000BEVT-08A0RT1, 02.01A02, max UDMA/133
[    2.233418] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.235325] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.235331] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    2.235665] ata1.00: configured for UDMA/133
[    2.235834] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000BEVT-0 02.0 PQ: 0 ANSI: 5
[    2.236022] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.236026] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.236079] sd 0:0:0:0: [sda] Write Protect is off
[    2.236082] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.236110] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.252077] hub 2-1:1.0: USB hub found
[    2.252246] hub 2-1:1.0: 8 ports detected
[    2.312213]  sda: sda1 sda2 < sda5 sda6 sda7 > sda3
[    2.312693] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.331372] usb 1-1.3: new full speed USB device using ehci_hcd and address 3
[    2.430174] [drm] fb mappable at 0xC0142000
[    2.430175] [drm] vram apper at 0xC0000000
[    2.430177] [drm] size 4325376
[    2.430178] [drm] fb depth is 24
[    2.430178] [drm]    pitch is 5632
[    2.430280] Console: switching to colour frame buffer device 170x48
[    2.430306] fb0: radeondrmfb frame buffer device
[    2.430308] drm: registered panic notifier
[    2.430315] [drm] Initialized radeon 2.8.0 20080528 for 0000:01:00.0 on minor 0
[    2.521260] usb 1-1.4: new high speed USB device using ehci_hcd and address 4
[    2.649866] usbcore: registered new interface driver uas
[    2.721154] usb 1-1.6: new full speed USB device using ehci_hcd and address 5
[    2.911048] usb 2-1.4: new high speed USB device using ehci_hcd and address 3
[    2.980832] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.983059] ata2.00: unexpected _GTF length (8)
[    2.983063] ata2.00: ATAPI: HL-DT-STDVDRAM GT30N, LE10, max UDMA/66
[    2.986604] ata2.00: unexpected _GTF length (8)
[    2.986611] ata2.00: configured for UDMA/66
[    2.991526] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GT30N     LE10 PQ: 0 ANSI: 5
[    2.995715] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.995720] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.995890] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.995950] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    3.340624] ata5: SATA link down (SStatus 0 SControl 300)
[    3.690437] ata6: SATA link down (SStatus 0 SControl 300)
[    3.696121] Initializing USB Mass Storage driver...
[    3.696287] scsi6 : usb-storage 1-1.4:1.0
[    3.696395] usbcore: registered new interface driver usb-storage
[    3.696396] USB Mass Storage support registered.
[    4.692877] scsi 6:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
[    4.694112] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    4.698239] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    5.913191] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   14.567616] <30>udev[374]: starting version 167
[   14.569931] Adding 3998716k swap on /dev/sda6.  Priority:-1 extents:1 across:3998716k
[   14.585171] lp: driver loaded but no devices found
[   14.810566] Non-volatile memory driver v1.3
[   14.862213] cfg80211: Calling CRDA to update world regulatory domain
[   14.864250] type=1400 audit(1306914614.822:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=455 comm="apparmor_parser"
[   14.864913] type=1400 audit(1306914614.822:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=455 comm="apparmor_parser"
[   14.865338] type=1400 audit(1306914614.822:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=455 comm="apparmor_parser"
[   14.890725] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[   14.890742] intel ips 0000:00:1f.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   14.890951] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
[   14.893538] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[   14.929678] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[   14.929681] thinkpad_acpi: http://ibm-acpi.sf.net/
[   14.929683] thinkpad_acpi: ThinkPad BIOS 80ET49WW (1.26 ), EC 80HT35WW-1.190000
[   14.929685] thinkpad_acpi: Lenovo ThinkPad Edge, model 0578KNG
[   14.931087] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[   14.961751] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   14.961829] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   14.961867] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   14.988788] thinkpad_acpi: radio switch found; radios are enabled
[   14.988803] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[   14.989834] thinkpad_acpi: asked for hotkey mask 0x04018070, but firmware forced it to 0x00018070
[   15.020831] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[   15.020835] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[   15.020916] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   15.020926] iwlagn 0000:03:00.0: setting latency timer to 64
[   15.020971] iwlagn 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
[   15.042212] iwlagn 0000:03:00.0: device EEPROM VER=0x15d, CALIB=0x6
[   15.042216] iwlagn 0000:03:00.0: Device SKU: 0X9
[   15.042218] iwlagn 0000:03:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3
[   15.044274] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
[   15.044435] iwlagn 0000:03:00.0: irq 45 for MSI/MSI-X
[   15.057381] Bluetooth: Core ver 2.15
[   15.057407] NET: Registered protocol family 31
[   15.057409] Bluetooth: HCI device and connection manager initialized
[   15.057411] Bluetooth: HCI socket layer initialized
[   15.062829] Bluetooth: Generic Bluetooth USB driver ver 0.6
[   15.068565] cfg80211: World regulatory domain updated:
[   15.068568] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   15.068570] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   15.068572] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   15.068573] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   15.068575] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   15.068577] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   15.073553] Linux video capture interface: v2.00
[   15.077433] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:4815)
[   15.079407] input: Integrated Camera as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input5
[   15.079483] usbcore: registered new interface driver uvcvideo
[   15.079486] USB Video Class driver (v1.0.0)
[   15.089623] hda_codec: ALC269: BIOS auto-probing.
[   15.090064] iwlagn 0000:03:00.0: loaded firmware version 128.50.3.1 build 13488
[   15.090240] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   15.094339] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   15.094411] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   15.094571] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   15.103576] HDA Intel 0000:01:00.1: irq 46 for MSI/MSI-X
[   15.103600] HDA Intel 0000:01:00.1: setting latency timer to 64
[   15.115196] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[   15.115538] usbcore: registered new interface driver btusb
[   15.118221] Registered led device: tpacpi::thinklight
[   15.118255] Registered led device: tpacpi::power
[   15.118273] Registered led device: tpacpi::standby
[   15.118292] Registered led device: tpacpi::thinkvantage
[   15.121727] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   15.128077] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
[   15.128186] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[   15.136853] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8
[   15.143657] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   15.922152] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd047b3/0xb40000/0xa0400
[   15.922162] serio: Synaptics pass-through port at isa0060/serio4/input0
[   15.977890] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[   16.558884] EXT3-fs: barriers not enabled
[   16.559641] kjournald starting.  Commit interval 5 seconds
[   16.560144] EXT3-fs (sda7): using internal journal
[   16.560152] EXT3-fs (sda7): mounted filesystem with ordered data mode
[   18.331690] ppdev: user-space parallel port driver
[   18.343981] type=1400 audit(1306914618.302:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=888 comm="apparmor_parser"
[   18.344728] type=1400 audit(1306914618.302:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=888 comm="apparmor_parser"
[   18.482894] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   18.495224] type=1400 audit(1306914618.452:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=903 comm="apparmor_parser"
[   18.495320] type=1400 audit(1306914618.452:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=900 comm="apparmor_parser"
[   18.495476] type=1400 audit(1306914618.452:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=904 comm="apparmor_parser"
[   18.495640] type=1400 audit(1306914618.452:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=903 comm="apparmor_parser"
[   18.497430] type=1400 audit(1306914618.452:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=902 comm="apparmor_parser"
[   18.540048] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
[   18.541457] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
[   18.542851] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
[   18.545253] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
[   18.546634] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   18.616057] r8169 0000:09:00.0: eth0: link down
[   18.616064] r8169 0000:09:00.0: eth0: link down
[   18.616743] ADDRCONF(NETDEV_UP): eth0: link is not ready

[JARDA001]

a tu je první část výpisu z Xorg.1.log (protože Xorg.0.log i Xorg.0.log.old jsou prázdný):

Kód: [Vybrat]

[  4750.653]
X.Org X Server 1.10.1
Release Date: 2011-04-15
[  4750.653] X Protocol Version 11, Revision 0
[  4750.653] Build Operating System: Linux 2.6.24-28-xen x86_64 Ubuntu
[  4750.653] Current Operating System: Linux laptop 2.6.38-8-generic #42-Ubuntu SMP Mon Apr 11 03:31:24 UTC 2011 x86_64
[  4750.653] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=7c77ab73-30c9-423d-8c95-8adfe6b10b15 ro crashkernel=384M-2G:64M,2G-:128M quiet splash vt.handoff=7
[  4750.653] Build Date: 30 April 2011  08:02:46PM
[  4750.653] xorg-server 2:1.10.1+git20110429+server-1.10-branch.b4455b11-0ubuntu0sarvatt (For technical support please see http://www.ubuntu.com/support)
[  4750.653] Current version of pixman: 0.21.8
[  4750.653] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[  4750.653] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  4750.653] (==) Log file: "/var/log/Xorg.1.log", Time: Sun May 29 11:25:22 2011
[  4750.654] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  4750.654] (==) No Layout section.  Using the first Screen section.
[  4750.654] (==) No screen section available. Using defaults.
[  4750.654] (**) |-->Screen "Default Screen Section" (0)
[  4750.654] (**) |   |-->Monitor "<default monitor>"
[  4750.655] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[  4750.655] (==) Automatically adding devices
[  4750.655] (==) Automatically enabling devices
[  4750.655] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[  4750.655] Entry deleted from font path.
[  4750.655] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[  4750.655] Entry deleted from font path.
[  4750.655] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[  4750.655] Entry deleted from font path.
[  4750.655] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[  4750.655] Entry deleted from font path.
[  4750.655] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[  4750.655] Entry deleted from font path.
[  4750.655] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[  4750.655] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[  4750.655] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[  4750.655] (II) Loader magic: 0x7e0e40
[  4750.655] (II) Module ABI versions:
[  4750.655] X.Org ANSI C Emulation: 0.4
[  4750.655] X.Org Video Driver: 10.0
[  4750.655] X.Org XInput driver : 12.3
[  4750.655] X.Org Server Extension : 5.0
[  4750.657] (--) PCI:*(0:1:0:0) 1002:9553:17aa:215b rev 0, Mem @ 0xc0000000/536870912, 0xf0300000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
[  4750.657] (II) Open ACPI successful (/var/run/acpid.socket)
[  4750.657] (II) LoadModule: "extmod"
[  4750.658] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[  4750.658] (II) Module extmod: vendor="X.Org Foundation"
[  4750.658] compiled for 1.10.1, module version = 1.0.0
[  4750.658] Module class: X.Org Server Extension
[  4750.658] ABI class: X.Org Server Extension, version 5.0
[  4750.658] (II) Loading extension MIT-SCREEN-SAVER
[  4750.658] (II) Loading extension XFree86-VidModeExtension
[  4750.658] (II) Loading extension XFree86-DGA
[  4750.658] (II) Loading extension DPMS
[  4750.658] (II) Loading extension XVideo
[  4750.658] (II) Loading extension XVideo-MotionCompensation
[  4750.658] (II) Loading extension X-Resource
[  4750.658] (II) LoadModule: "dbe"
[  4750.659] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[  4750.659] (II) Module dbe: vendor="X.Org Foundation"
[  4750.659] compiled for 1.10.1, module version = 1.0.0
[  4750.659] Module class: X.Org Server Extension
[  4750.659] ABI class: X.Org Server Extension, version 5.0
[  4750.659] (II) Loading extension DOUBLE-BUFFER
[  4750.659] (II) LoadModule: "glx"
[  4750.659] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  4750.660] (II) Module glx: vendor="X.Org Foundation"
[  4750.660] compiled for 1.10.1, module version = 1.0.0
[  4750.660] ABI class: X.Org Server Extension, version 5.0
[  4750.660] (==) AIGLX enabled
[  4750.660] (II) Loading extension GLX
[  4750.660] (II) LoadModule: "record"
[  4750.660] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[  4750.660] (II) Module record: vendor="X.Org Foundation"
[  4750.660] compiled for 1.10.1, module version = 1.13.0
[  4750.660] Module class: X.Org Server Extension
[  4750.660] ABI class: X.Org Server Extension, version 5.0
[  4750.660] (II) Loading extension RECORD
[  4750.660] (II) LoadModule: "dri"
[  4750.660] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[  4750.660] (II) Module dri: vendor="X.Org Foundation"
[  4750.660] compiled for 1.10.1, module version = 1.0.0
[  4750.660] ABI class: X.Org Server Extension, version 5.0
[  4750.660] (II) Loading extension XFree86-DRI
[  4750.660] (II) LoadModule: "dri2"
[  4750.661] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[  4750.661] (II) Module dri2: vendor="X.Org Foundation"
[  4750.661] compiled for 1.10.1, module version = 1.2.0
[  4750.661] ABI class: X.Org Server Extension, version 5.0
[  4750.661] (II) Loading extension DRI2
[  4750.661] (==) Matched fglrx as autoconfigured driver 0
[  4750.661] (==) Matched ati as autoconfigured driver 1
[  4750.661] (==) Matched vesa as autoconfigured driver 2
[  4750.661] (==) Matched fbdev as autoconfigured driver 3
[  4750.661] (==) Assigned the driver to the xf86ConfigLayout
[  4750.661] (II) LoadModule: "fglrx"
[  4750.662] (WW) Warning, couldn't open module fglrx
[  4750.662] (II) UnloadModule: "fglrx"
[  4750.662] (II) Unloading fglrx
[  4750.662] (EE) Failed to load module "fglrx" (module does not exist, 0)
[  4750.662] (II) LoadModule: "ati"
[  4750.662] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[  4750.662] (II) Module ati: vendor="X.Org Foundation"
[  4750.662] compiled for 1.10.0, module version = 6.14.0
[  4750.662] Module class: X.Org Video Driver
[  4750.662] ABI class: X.Org Video Driver, version 10.0
[  4750.662] (II) LoadModule: "radeon"
[  4750.662] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[  4750.662] (II) Module radeon: vendor="X.Org Foundation"
[  4750.662] compiled for 1.10.0, module version = 6.14.0
[  4750.662] Module class: X.Org Video Driver
[  4750.662] ABI class: X.Org Video Driver, version 10.0
[  4750.662] (II) LoadModule: "vesa"
[  4750.663] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[  4750.663] (II) Module vesa: vendor="X.Org Foundation"
[  4750.663] compiled for 1.10.1, module version = 2.3.0
[  4750.663] Module class: X.Org Video Driver
[  4750.663] ABI class: X.Org Video Driver, version 10.0
[  4750.663] (II) LoadModule: "fbdev"
[  4750.663] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[  4750.663] (II) Module fbdev: vendor="X.Org Foundation"
[  4750.663] compiled for 1.10.1, module version = 0.4.2
[  4750.663] Module class: X.Org Video Driver
[  4750.663] ABI class: X.Org Video Driver, version 10.0
[  4750.663] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, ATI Radeon HD 4200, ATI Radeon 4100,
ATI Mobility Radeon HD 4200, ATI Mobility Radeon 4100,
ATI Radeon HD 4290, ATI Radeon HD 4250, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6250 Graphics, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5900 Series, ATI Radeon HD 5900 Series,
ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 5700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, AMD Radeon HD 6900M Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS,
Mobility Radeon HD 6000 Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, BARTS, BARTS, AMD Radeon HD 6800 Series,
AMD Radeon HD 6800 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS


[JARDA001]

a Xorg.1.log část dva:

Kód: [Vybrat]

[  4750.666] (II) VESA: driver for VESA chipsets: vesa
[  4750.666] (II) FBDEV: driver for framebuffer: fbdev
[  4750.667] (++) using VT number 8

[  4750.810] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[  4750.810] (II) [KMS] Kernel modesetting enabled.
[  4750.810] (WW) Falling back to old probe method for vesa
[  4750.810] (WW) Falling back to old probe method for fbdev
[  4750.810] (II) Loading sub module "fbdevhw"
[  4750.810] (II) LoadModule: "fbdevhw"
[  4750.810] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[  4750.810] (II) Module fbdevhw: vendor="X.Org Foundation"
[  4750.810] compiled for 1.10.1, module version = 0.0.2
[  4750.810] ABI class: X.Org Video Driver, version 10.0
[  4750.810] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[  4750.811] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[  4750.811] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[  4750.811] (==) RADEON(0): Default visual is TrueColor
[  4750.811] (==) RADEON(0): RGB weight 888
[  4750.811] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[  4750.811] (--) RADEON(0): Chipset: "ATI Mobility Radeon 4500 Series" (ChipID = 0x9553)
[  4750.811] (II) RADEON(0): PCIE card detected
[  4750.811] drmOpenDevice: node name is /dev/dri/card0
[  4750.811] drmOpenDevice: open result is 9, (OK)
[  4750.811] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[  4750.811] drmOpenDevice: node name is /dev/dri/card0
[  4750.811] drmOpenDevice: open result is 9, (OK)
[  4750.811] drmOpenByBusid: drmOpenMinor returns 9
[  4750.811] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[  4750.811] (II) RADEON(0): KMS Color Tiling: disabled
[  4750.811] (II) RADEON(0): KMS Pageflipping: enabled
[  4750.811] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[  4750.830] (II) RADEON(0): Output VGA-0 has no monitor section
[  4750.834] (II) RADEON(0): Output HDMI-0 has no monitor section
[  4750.834] (II) RADEON(0): Output LVDS has no monitor section
[  4750.850] (II) RADEON(0): EDID for output VGA-0
[  4750.854] (II) RADEON(0): EDID for output HDMI-0
[  4750.854] (II) RADEON(0): EDID for output LVDS
[  4750.854] (II) RADEON(0): Manufacturer: LEN  Model: 40a0  Serial#: 0
[  4750.854] (II) RADEON(0): Year: 2009  Week: 1
[  4750.854] (II) RADEON(0): EDID Version: 1.3
[  4750.854] (II) RADEON(0): Digital Display Input
[  4750.854] (II) RADEON(0): Max Image Size [cm]: horiz.: 31  vert.: 17
[  4750.854] (II) RADEON(0): Gamma: 2.20
[  4750.854] (II) RADEON(0): DPMS capabilities: StandBy Suspend Off
[  4750.854] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[  4750.854] (II) RADEON(0): First detailed timing is preferred mode
[  4750.854] (II) RADEON(0): redX: 0.620 redY: 0.340   greenX: 0.330 greenY: 0.570
[  4750.854] (II) RADEON(0): blueX: 0.150 blueY: 0.600   whiteX: 0.313 whiteY: 0.329
[  4750.854] (II) RADEON(0): Manufacturer's mask: 0
[  4750.854] (II) RADEON(0): Supported detailed timing:
[  4750.854] (II) RADEON(0): clock: 69.0 MHz   Image Size:  309 x 173 mm
[  4750.854] (II) RADEON(0): h_active: 1366  h_sync: 1404  h_sync_end 1426 h_blank_end 1436 h_border: 0
[  4750.854] (II) RADEON(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 801 v_border: 0
[  4750.854] (II) RADEON(0): Supported detailed timing:
[  4750.854] (II) RADEON(0): clock: 57.5 MHz   Image Size:  309 x 173 mm
[  4750.854] (II) RADEON(0): h_active: 1366  h_sync: 1404  h_sync_end 1426 h_blank_end 1436 h_border: 0
[  4750.854] (II) RADEON(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 801 v_border: 0
[  4750.854] (II) RADEON(0): Unknown vendor-specific block f
[  4750.855] (II) RADEON(0):  B140XW01 V6
[  4750.855] (II) RADEON(0): EDID (in hex):
[  4750.855] (II) RADEON(0): 00ffffffffffff0030aea04000000000
[  4750.855] (II) RADEON(0): 01130103801f1178eac8a59e57549226
[  4750.855] (II) RADEON(0): 99505400000001010101010101010101
[  4750.855] (II) RADEON(0): 010101010101f91a5646500021302616
[  4750.855] (II) RADEON(0): 360035ad100000187a16564650002130
[  4750.855] (II) RADEON(0): 2616360035ad100000180000000f008c
[  4750.855] (II) RADEON(0): 09328c092816090006af5636000000fe
[  4750.855] (II) RADEON(0): 004231343058573031205636200a00a0
[  4750.855] (II) RADEON(0): Printing probed modes for output LVDS
[  4750.855] (II) RADEON(0): Modeline "1366x768"x60.0   69.05  1366 1404 1426 1436  768 771 777 801 -hsync -vsync (48.1 kHz)
[  4750.855] (II) RADEON(0): Modeline "1366x768"x50.0   57.54  1366 1404 1426 1436  768 771 777 801 -hsync -vsync (40.1 kHz)
[  4750.855] (II) RADEON(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz)
[  4750.855] (II) RADEON(0): Modeline "1152x768"x59.8   71.75  1152 1216 1328 1504  768 771 781 798 -hsync +vsync (47.7 kHz)
[  4750.855] (II) RADEON(0): Modeline "1024x768"x59.9   63.50  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz)
[  4750.855] (II) RADEON(0): Modeline "800x600"x59.9   38.25  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz)
[  4750.855] (II) RADEON(0): Modeline "848x480"x59.7   31.50  848 872 952 1056  480 483 493 500 -hsync +vsync (29.8 kHz)
[  4750.855] (II) RADEON(0): Modeline "720x480"x59.7   26.75  720 744 808 896  480 483 493 500 -hsync +vsync (29.9 kHz)
[  4750.855] (II) RADEON(0): Modeline "640x480"x59.4   23.75  640 664 720 800  480 483 487 500 -hsync +vsync (29.7 kHz)
[  4750.855] (II) RADEON(0): Output VGA-0 disconnected
[  4750.855] (II) RADEON(0): Output HDMI-0 disconnected
[  4750.855] (II) RADEON(0): Output LVDS connected
[  4750.855] (II) RADEON(0): Using exact sizes for initial modes
[  4750.855] (II) RADEON(0): Output LVDS using initial mode 1366x768
[  4750.855] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[  4750.855] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:20000000 visible:1fba0000
[  4750.855] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[  4750.855] (==) RADEON(0): DPI set to (96, 96)
[  4750.855] (II) Loading sub module "fb"
[  4750.855] (II) LoadModule: "fb"
[  4750.855] (II) Loading /usr/lib/xorg/modules/libfb.so
[  4750.855] (II) Module fb: vendor="X.Org Foundation"
[  4750.855] compiled for 1.10.1, module version = 1.0.0
[  4750.855] ABI class: X.Org ANSI C Emulation, version 0.4
[  4750.855] (II) Loading sub module "ramdac"
[  4750.855] (II) LoadModule: "ramdac"
[  4750.855] (II) Module "ramdac" already built-in
[  4750.855] (II) Loading sub module "exa"
[  4750.855] (II) LoadModule: "exa"
[  4750.856] (II) Loading /usr/lib/xorg/modules/libexa.so
[  4750.856] (II) Module exa: vendor="X.Org Foundation"
[  4750.856] compiled for 1.10.1, module version = 2.5.0
[  4750.856] ABI class: X.Org Video Driver, version 10.0
[  4750.856] (II) UnloadModule: "vesa"
[  4750.856] (II) Unloading vesa
[  4750.856] (II) UnloadModule: "fbdev"
[  4750.856] (II) Unloading fbdev
[  4750.856] (II) UnloadModule: "fbdevhw"
[  4750.856] (II) Unloading fbdevhw
[  4750.856] (--) Depth 24 pixmap format is 32 bpp
[  4750.856] (II) RADEON(0): [DRI2] Setup complete
[  4750.856] (II) RADEON(0): [DRI2]   DRI driver: r600
[  4750.856] (II) RADEON(0): Front buffer size: 4224K
[  4750.856] (II) RADEON(0): VRAM usage limit set to 464025K
[  4750.856] (==) RADEON(0): Backing store disabled
[  4750.856] (II) RADEON(0): Direct rendering enabled
[  4750.857] (II) RADEON(0): Setting EXA maxPitchBytes
[  4750.857] (II) EXA(0): Driver allocated offscreen pixmaps
[  4750.857] (II) EXA(0): Driver registered support for the following operations:
[  4750.857] (II)         Solid
[  4750.857] (II)         Copy
[  4750.857] (II)         Composite (RENDER acceleration)
[  4750.857] (II)         UploadToScreen
[  4750.857] (II)         DownloadFromScreen
[  4750.857] (II) RADEON(0): Acceleration enabled
[  4750.857] (==) RADEON(0): DPMS enabled
[  4750.857] (==) RADEON(0): Silken mouse enabled
[  4750.857] (II) RADEON(0): Set up textured video
[  4750.857] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[  4750.857] (--) RandR disabled
[  4750.857] (II) Initializing built-in extension Generic Event Extension
[  4750.857] (II) Initializing built-in extension SHAPE
[  4750.857] (II) Initializing built-in extension MIT-SHM
[  4750.857] (II) Initializing built-in extension XInputExtension
[  4750.857] (II) Initializing built-in extension XTEST
[  4750.857] (II) Initializing built-in extension BIG-REQUESTS
[  4750.857] (II) Initializing built-in extension SYNC
[  4750.857] (II) Initializing built-in extension XKEYBOARD
[  4750.857] (II) Initializing built-in extension XC-MISC
[  4750.857] (II) Initializing built-in extension SECURITY
[  4750.857] (II) Initializing built-in extension XINERAMA
[  4750.857] (II) Initializing built-in extension XFIXES
[  4750.857] (II) Initializing built-in extension RENDER
[  4750.857] (II) Initializing built-in extension RANDR
[  4750.857] (II) Initializing built-in extension COMPOSITE
[  4750.857] (II) Initializing built-in extension DAMAGE
[  4750.857] (II) Initializing built-in extension GESTURE
[  4750.863] (II) AIGLX: Trying DRI driver /usr/lib/dri/r600_dri.so
[  4750.868] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[  4750.868] (II) AIGLX: enabled GLX_INTEL_swap_event
[  4750.868] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[  4750.868] (II) AIGLX: enabled GLX_SGI_make_current_read
[  4750.868] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[  4750.869] (II) AIGLX: Loaded and initialized r600
[  4750.869] (II) GLX: Initialized DRI2 GL provider for screen 0
[  4750.869] (II) RADEON(0): Setting screen physical size to 361 x 203
[  4750.875] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[  4750.882] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[  4750.882] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  4750.882] (II) LoadModule: "evdev"
[  4750.882] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  4750.882] (II) Module evdev: vendor="X.Org Foundation"
[  4750.883] compiled for 1.10.0, module version = 2.6.0
[  4750.883] Module class: X.Org XInput Driver
[  4750.883] ABI class: X.Org XInput driver, version 12.3
[  4750.883] (II) Using input driver 'evdev' for 'Power Button'
[  4750.883] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  4750.883] (**) Power Button: always reports core events
[  4750.883] (**) evdev: Power Button: Device: "/dev/input/event2"
[  4751.000] (--) evdev: Power Button: Found keys
[  4751.000] (II) evdev: Power Button: Configuring as keyboard
[  4751.000] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[  4751.000] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[  4751.000] (**) Option "xkb_rules" "evdev"
[  4751.000] (**) Option "xkb_model" "pc105"
[  4751.000] (**) Option "xkb_layout" "cz"
[  4751.004] (II) XKB: reuse xkmfile /var/lib/xkb/server-583B992BBA3776030BA62AC94FC7F0AE9B04119F.xkm
[  4751.104] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[  4751.104] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  4751.104] (II) Using input driver 'evdev' for 'Video Bus'
[  4751.104] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  4751.104] (**) Video Bus: always reports core events
[  4751.104] (**) evdev: Video Bus: Device: "/dev/input/event4"
[  4751.115] (--) evdev: Video Bus: Found keys
[  4751.115] (II) evdev: Video Bus: Configuring as keyboard
[  4751.115] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input4/event4"
[  4751.115] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[  4751.115] (**) Option "xkb_rules" "evdev"
[  4751.115] (**) Option "xkb_model" "pc105"
[  4751.115] (**) Option "xkb_layout" "cz"
[  4751.130] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[  4751.130] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  4751.130] (II) Using input driver 'evdev' for 'Power Button'
[  4751.130] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  4751.130] (**) Power Button: always reports core events
[  4751.130] (**) evdev: Power Button: Device: "/dev/input/event1"
[  4751.170] (--) evdev: Power Button: Found keys
[  4751.170] (II) evdev: Power Button: Configuring as keyboard
[  4751.170] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[  4751.170] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[  4751.170] (**) Option "xkb_rules" "evdev"
[  4751.170] (**) Option "xkb_model" "pc105"
[  4751.170] (**) Option "xkb_layout" "cz"
[  4751.170] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[  4751.171] (II) No input driver/identifier specified (ignoring)
[  4751.176] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event7)
[  4751.176] (II) No input driver/identifier specified (ignoring)
[  4751.176] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event8)
[  4751.176] (II) No input driver/identifier specified (ignoring)
[  4751.179] (II) config/udev: Adding input device Integrated Camera (/dev/input/event5)
[  4751.179] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[  4751.179] (II) Using input driver 'evdev' for 'Integrated Camera'
[  4751.179] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  4751.179] (**) Integrated Camera: always reports core events
[  4751.179] (**) evdev: Integrated Camera: Device: "/dev/input/event5"
[  4751.180] (--) evdev: Integrated Camera: Found keys
[  4751.180] (II) evdev: Integrated Camera: Configuring as keyboard
[  4751.180] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input5/event5"
[  4751.180] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD)
[  4751.180] (**) Option "xkb_rules" "evdev"
[  4751.180] (**) Option "xkb_model" "pc105"
[  4751.180] (**) Option "xkb_layout" "cz"
[  4751.186] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[  4751.186] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  4751.186] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[  4751.186] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  4751.186] (**) AT Translated Set 2 keyboard: always reports core events
[  4751.186] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[  4751.186] (--) evdev: AT Translated Set 2 keyboard: Found keys
[  4751.186] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[  4751.186] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[  4751.186] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[  4751.186] (**) Option "xkb_rules" "evdev"
[  4751.186] (**) Option "xkb_model" "pc105"
[  4751.186] (**) Option "xkb_layout" "cz"
[  4751.187] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[  4751.187] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[  4751.187] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[  4751.187] (II) LoadModule: "synaptics"
[  4751.188] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[  4751.189] (II) Module synaptics: vendor="X.Org Foundation"
[  4751.189] compiled for 1.10.1, module version = 1.3.99
[  4751.189] Module class: X.Org XInput Driver
[  4751.189] ABI class: X.Org XInput driver, version 12.3
[  4751.189] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[  4751.189] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[  4751.189] (**) SynPS/2 Synaptics TouchPad: always reports core events
[  4751.189] (**) Option "Device" "/dev/input/event9"
[  4751.430] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5856
[  4751.430] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4938
[  4751.430] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[  4751.430] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[  4751.430] (--) SynPS/2 Synaptics TouchPad: buttons: left right double triple
[  4751.430] (--) SynPS/2 Synaptics TouchPad: touchpad found
[  4751.430] (**) SynPS/2 Synaptics TouchPad: always reports core events
[  4751.430] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input9/event9"
[  4751.430] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[  4751.430] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[  4751.430] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[  4751.430] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
[  4751.430] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[  4751.430] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[  4751.430] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[  4751.430] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[  4751.440] (--) SynPS/2 Synaptics TouchPad: touchpad found
[  4751.441] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[  4751.441] (II) No input driver/identifier specified (ignoring)
[  4751.441] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event10)
[  4751.441] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[  4751.441] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[  4751.441] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  4751.441] (**) TPPS/2 IBM TrackPoint: always reports core events
[  4751.441] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event10"
[  4751.448] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[  4751.448] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[  4751.448] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[  4751.448] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[  4751.448] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[  4751.448] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  4751.448] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/serio5/input/input10/event10"
[  4751.448] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
[  4751.449] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[  4751.449] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[  4751.449] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[  4751.449] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[  4751.449] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[  4751.449] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[  4751.449] (II) No input driver/identifier specified (ignoring)
[  4751.453] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event6)
[  4751.453] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[  4751.453] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[  4751.453] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  4751.453] (**) ThinkPad Extra Buttons: always reports core events
[  4751.453] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event6"
[  4751.453] (--) evdev: ThinkPad Extra Buttons: Found keys
[  4751.453] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[  4751.453] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input6/event6"
[  4751.453] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD)
[  4751.453] (**) Option "xkb_rules" "evdev"
[  4751.453] (**) Option "xkb_model" "pc105"
[  4751.453] (**) Option "xkb_layout" "cz"
[  4806.950] (II) evdev: Power Button: Close
[  4806.950] (II) UnloadModule: "evdev"
[  4806.950] (II) Unloading evdev
[  4806.964] (II) evdev: Video Bus: Close
[  4806.964] (II) UnloadModule: "evdev"
[  4806.964] (II) Unloading evdev
[  4806.964] (II) evdev: Power Button: Close
[  4806.964] (II) UnloadModule: "evdev"
[  4806.964] (II) Unloading evdev
[  4806.964] (II) evdev: Integrated Camera: Close
[  4806.964] (II) UnloadModule: "evdev"
[  4806.964] (II) Unloading evdev
[  4806.964] (II) evdev: AT Translated Set 2 keyboard: Close
[  4806.964] (II) UnloadModule: "evdev"
[  4806.964] (II) Unloading evdev
[  4806.964] (II) UnloadModule: "synaptics"
[  4806.964] (II) Unloading synaptics
[  4806.965] (II) evdev: TPPS/2 IBM TrackPoint: Close
[  4806.965] (II) UnloadModule: "evdev"
[  4806.965] (II) Unloading evdev
[  4806.965] (II) evdev: ThinkPad Extra Buttons: Close
[  4806.965] (II) UnloadModule: "evdev"
[  4806.965] (II) Unloading evdev
[  4806.972]  ddxSigGiveUp: Closing log

[sabraq]

Toto znamená, že nejspíš běžíš na svobodným ovladači. Ale přesto by to nemělo tolik topit..

Kód: [Vybrat]

[  4750.661] (II) LoadModule: "fglrx"
[  4750.662] (WW) Warning, couldn't open module fglrx
[  4750.662] (II) UnloadModule: "fglrx"
[  4750.662] (II) Unloading fglrx
[  4750.662] (EE) Failed to load module "fglrx" (module does not exist, 0)
[  4750.662] (II) LoadModule: "ati"
V dmesgu jsem opravdu na žádnou jinou grafiku nenarazil, jestli jsem se dobře díval.

Máš nainstalovaný lm-sensors + sensors-applet?

sudo apt-get install lm-sensors sensors-applet (i když v unity bude tenhle applet asi k ničemu)

potom spustit v konzoli sensors-detect, vesměs všechno odentrovat, potom zkusit spustit příkaz sensors..a mělo by to odečítat.

Abychom zjistili, co tak hřeje. S radeonem x1600 jsem měl smůlu, že asi neměl čidlo teploty, ale tenhle novej radeon by ho snad mít měl..

Když tak se dá potom rozběhnout škálování cpu, aby neběžel pořád na max., přes cpu-freq nebo powernowd...A případně rozběhnout ten firemní ATI ovladač, spusť kdyžtak

Kód: [Vybrat]

sudo sh ./ati-driver-installer-11-5-x86.x86_64.run --buildpkg Ubuntu/natty
a dej sem výstup, jestli se vytvoří balíčky správně.

[sabraq]

Tak možná jsem v tom tvém dmesg přece jenom něco vypátral:

Kód: [Vybrat]

[   14.890951] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
A je to hlášeno jako bug.

https://bugs.launchpad.net/ubuntu/+source/linux/+bug/651104

Forgot to mention that I have a Dell Studio with Core i5's built-in Intel GMA Graphics and ATI 5470 Graphics Card.

Zkus použít starší Ubuntu se starším jádrem, než máš teď .

Protože toto

Kód: [Vybrat]

[   14.890725] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
je taky divný...

[JARDA001]

tak senzory asi takhle:

Kód: [Vybrat]

cpitz-virtual-0
Adapter: Virtual device
temp1:       +82.0°C  (crit = +105.0°C)                 

thinkpad-isa-0000
Adapter: ISA adapter
fan1:        598 RPM
temp1:       +77.0°C                                   
temp2:       +82.0°C                                   
temp3:       +73.0°C                                   
temp4:        +4.0°C                                   
temp5:        +0.0°C                                   
temp6:        +0.0°C                                   
temp7:       +35.0°C                                   
temp8:        +0.0°C                                   
temp9:       +80.0°C                                   
temp10:      +61.0°C                                   
temp11:      +96.0°C                                   
temp12:      +73.0°C                                   
temp13:      +80.0°C                                   
temp14:       +0.0°C                                   
temp15:       +0.0°C                                   
temp16:       +0.0°C
když dám proprietární ovladače (bez balíků, prostě sh *.run) tak je to na píp,  někdy se seká obraz a když manuálně přepnu přes aticonfig na nízkoodběrovej provoz tak to po restartu nahodí chybovku a nenajedu ani jako nouzi když dám v tom grafickym okně jenom pro danou session ani když dám rekonfigurovat xorg:/

jo to zahlídnu vždycky když startuju kompl a mam proprietární ovladače (bug v bootsplash-plymouth) ale taký chyby mi běhali aj na minulí verzi a pohoda.

teď si nejsem jistej ale mam za to že na minulý verzi to jelo (ikdyž nevim jestli přepínání) ale powermanagement tušim že jo. právě že jsem takej že automaticky přecházim na všecko nový, co nejde se většinou do měsíce vyřeší ale tohle pořád nějak ne:/

ta druhá chybovka, nevíš co by mohla znamenat?

jinak pokud jsem četl dobře tak v tom hlášenym bugu některejm pomohlo to co je v 25 komentu... když jsem to zkusil tak  oproti tomu měření vejš se to změnilo takto:

Kód: [Vybrat]

acpitz-virtual-0
Adapter: Virtual device
temp1:       +84.0°C  (crit = +105.0°C)                 

coretemp-isa-0000
Adapter: ISA adapter
Core 0:      +75.0°C  (high = +95.0°C, crit = +105.0°C) 

coretemp-isa-0001
Adapter: ISA adapter
Core 2:      +74.0°C  (high = +95.0°C, crit = +105.0°C) 

thinkpad-isa-0000
Adapter: ISA adapter
fan1:        600 RPM
temp1:       +83.0°C                                   
temp2:       +83.0°C                                   
temp3:       +74.0°C                                   
temp4:       +10.0°C                                   
temp5:        +0.0°C                                   
temp6:        +0.0°C                                   
temp7:       +35.0°C                                   
temp8:        +0.0°C                                   
temp9:       +80.0°C                                   
temp10:      +59.0°C                                   
temp11:     -116.0°C                                   
temp12:      +74.0°C                                   
temp13:      +80.0°C                                   
temp14:       +0.0°C                                   
temp15:       +0.0°C                                   
temp16:       +0.0°C

[jadd]

Taky mi to na radeona topí jak blázen něco kolem 97°C. S tím asi nic neuděláme..
Už jsem v jednom postu psal že je to chyba v 11.04 nebo 11.04 (64bit) a nebo to posrali vývojáři radeonu.
Protože ten ovladač dřív fungoval dobře.
Výměna v Synapticu za fglrx to řeší. Zase ale nejde nainstalit xvba.

[sabraq]

tak senzory asi takhle:

Kód: [Vybrat]

cpitz-virtual-0
Adapter: Virtual device
temp1:       +82.0°C  (crit = +105.0°C)                 

thinkpad-isa-0000
Adapter: ISA adapter
fan1:        598 RPM
temp1:       +77.0°C                                   
temp2:       +82.0°C                                   
temp3:       +73.0°C                                   
temp4:        +4.0°C                                   
temp5:        +0.0°C                                   
temp6:        +0.0°C                                   
temp7:       +35.0°C                                   
temp8:        +0.0°C                                   
temp9:       +80.0°C                                   
temp10:      +61.0°C                                   
temp11:      +96.0°C                                   
temp12:      +73.0°C                                   
temp13:      +80.0°C                                   
temp14:       +0.0°C                                   
temp15:       +0.0°C                                   
temp16:       +0.0°C
když dám proprietární ovladače (bez balíků, prostě sh *.run) tak je to na píp,  někdy se seká obraz a když manuálně přepnu přes aticonfig na nízkoodběrovej provoz tak to po restartu nahodí chybovku a nenajedu ani jako nouzi když dám v tom grafickym okně jenom pro danou session ani když dám rekonfigurovat xorg:/

jo to zahlídnu vždycky když startuju kompl a mam proprietární ovladače (bug v bootsplash-plymouth) ale taký chyby mi běhali aj na minulí verzi a pohoda.

teď si nejsem jistej ale mam za to že na minulý verzi to jelo (ikdyž nevim jestli přepínání) ale powermanagement tušim že jo. právě že jsem takej že automaticky přecházim na všecko nový, co nejde se většinou do měsíce vyřeší ale tohle pořád nějak ne:/

ta druhá chybovka, nevíš co by mohla znamenat?

jinak pokud jsem četl dobře tak v tom hlášenym bugu některejm pomohlo to co je v 25 komentu... když jsem to zkusil tak  oproti tomu měření vejš se to změnilo takto:

Kód: [Vybrat]

acpitz-virtual-0
Adapter: Virtual device
temp1:       +84.0°C  (crit = +105.0°C)                 

coretemp-isa-0000
Adapter: ISA adapter
Core 0:      +75.0°C  (high = +95.0°C, crit = +105.0°C) 

coretemp-isa-0001
Adapter: ISA adapter
Core 2:      +74.0°C  (high = +95.0°C, crit = +105.0°C) 

thinkpad-isa-0000
Adapter: ISA adapter
fan1:        600 RPM
temp1:       +83.0°C                                   
temp2:       +83.0°C                                   
temp3:       +74.0°C                                   
temp4:       +10.0°C                                   
temp5:        +0.0°C                                   
temp6:        +0.0°C                                   
temp7:       +35.0°C                                   
temp8:        +0.0°C                                   
temp9:       +80.0°C                                   
temp10:      +59.0°C                                   
temp11:     -116.0°C                                   
temp12:      +74.0°C                                   
temp13:      +80.0°C                                   
temp14:       +0.0°C                                   
temp15:       +0.0°C                                   
temp16:       +0.0°C

To jsou každopádně obrovský teploty, ten NB takhle zbytečně stárne. Workaround z #25 zkusit můžeš, ale hned pod ním dva nebo 3 lidi hlásí, že jim to nepomohlo. Zkusil bych spustit třeba livecd 10.04 LTS, jestli to bude dělat i tam. Lidi tam psali, že jim to ve starších verzích nedělalo, takže by to teoreticky pak mělo jít přepínat. Pokud chceš mermomocí Unity, určitě existuje nějaký ppa pro 10.04 LTS.

[sabraq]

Taky mi to na radeona topí jak blázen něco kolem 97°C. S tím asi nic neuděláme..
Už jsem v jednom postu psal že je to chyba v 11.04 nebo 11.04 (64bit) a nebo to posrali vývojáři radeonu.
Protože ten ovladač dřív fungoval dobře.
Výměna v Synapticu za fglrx to řeší. Zase ale nejde nainstalit xvba.

Jenomže Jarda fglrx rozběhlý nemá, navíc ty hodnoty okolo 80°C nejsou GPU, ale CPU...Prostě ten stroj je s 11.04 nepoužitelný.

[sabraq]

ta druhá chybovka, nevíš co by mohla znamenat?

To je asi důvod, proč to tolik topí. Pokud ti to na předchozí verzi běželo, proveď downgrade.

EDIT: Přečti si :

downgrade

recenze Ub. Natty Narwhall na root.cz

[JARDA001]

můžu se ještě zeptat? říkáš že teploty jsou CPU ale tam mi škálování jede a většinově jede na 1,2GHz a ne na max takže myslim že to bude vážně grafika.

EDIT: dalo by se to překopíšrovat z MM? jako ty soubory myslim.

EDIT2: tak na 10.10 mi to taky nejede:/

[sabraq]

můžu se ještě zeptat? říkáš že teploty jsou CPU ale tam mi škálování jede a většinově jede na 1,2GHz a ne na max takže myslim že to bude vážně grafika.

EDIT: dalo by se to překopíšrovat z MM? jako ty soubory myslim.

EDIT2: tak na 10.10 mi to taky nejede:/

Zálohuj si někam složku /home/ a pak ji tam po instalaci můžeš zase překopírovat, čili si vytvoř stejného uživatele.

Možná se budeš muset vrátit až k 10.04 LTS.

No je to divný, jestli to odečítá ty teploty správně.

[JARDA001]

tak já si dávám už od začátku používání linuxu (přes dva roky?) home na oddělenou particii. dělával jsem to vlastně už chvilku před skončením na widlích.

myslíš že by pomohlo zkompilovat jádro? když bych si udělal dle dokumentace podobný co je v příspěvky #8 v tom hlášení bugu? prej nově je to vyřešený tak mě napadlo to udělat stejně ale s optimalizací pro iX.

jenom by mě zajímalo, co je za chybu to druhý :/

jakej na tohle máš názor? myslím si že by to pomohlo ale nevim to jistě, žádnej profík nejsem:(

[sabraq]

Můžeš si zkusit opatchovat a zkompilovat jádro podle příspěvku #35 - možná že bude už někde na nějakým ppa, to že máš home na zvláštním oddílu je ideální...