Tak jsem nahodil dmesg a píše to:
(lpj=9585514)
[ 15.532071] Security Framework initialized
[ 15.532078] SELinux: Disabled at boot.
[ 15.532096] AppArmor: AppArmor initialized
[ 15.532102] Failure registering capabilities with primary security module.
[ 15.532112] Mount-cache hash table entries: 512
[ 15.532276] Initializing cgroup subsys ns
[ 15.532282] Initializing cgroup subsys cpuacct
[ 15.532298] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000041d 00000000 00000000 00000000
[ 15.532311] monitor/mwait feature present.
[ 15.532313] using mwait in idle threads.
[ 15.532321] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 15.532324] CPU: L2 cache: 1024K
[ 15.532328] CPU: Hyper-Threading is disabled
[ 15.532331] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b180 0000041d 00000000 00000000 00000000
[ 15.532345] Compat vDSO mapped to ffffe000.
[ 15.532366] Checking 'hlt' instruction... OK.
[ 15.548559] SMP alternatives: switching to UP code
[ 15.550740] Freeing SMP alternatives: 11k freed
[ 15.550885] Early unpacking initramfs... done
[ 15.918878] ACPI: Core revision 20070126
[ 15.918939] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 15.933592] CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 03
[ 15.933639] Total of 1 processors activated (4792.75 BogoMIPS).
[ 15.933773] ENABLING IO-APIC IRQs
[ 15.933948] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 16.079191] Brought up 1 CPUs
[ 16.079216] CPU0 attaching sched-domain:
[ 16.079220] domain 0: span 01
[ 16.079223] groups: 01
[ 16.079437] net_namespace: 64 bytes
[ 16.079446] Booting paravirtualized kernel on bare hardware
[ 16.080127] Time: 10:47:01 Date: 10/11/08
[ 16.080156] NET: Registered protocol family 16
[ 16.080442] EISA bus registered
[ 16.080468] ACPI: bus type pci registered
[ 16.108087] PCI: PCI BIOS revision 2.10 entry at 0xfbb60, last bus=2
[ 16.108090] PCI: Using configuration type 1
[ 16.108096] Setting up standard PCI resources
[ 16.120213] ACPI: EC: Look up EC in DSDT
[ 16.124811] ACPI: Interpreter enabled
[ 16.124815] ACPI: (supports S0 S1 S4 S5)
[ 16.124834] ACPI: Using IOAPIC for interrupt routing
[ 16.131038] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 16.131641] Force enabled HPET at base address 0xfed00000
[ 16.131649] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
[ 16.131653] PCI quirk: region 0480-04bf claimed by ICH4 GPIO
[ 16.132232] PCI: Transparent bridge - 0000:00:1e.0
[ 16.132263] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 16.132416] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 16.139790] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[ 16.139924] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 16.140055] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 16.140187] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[ 16.140319] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 16.140456] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 16.140590] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 16.140722] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 16.140873] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 16.140919] pnp: PnP ACPI init
[ 16.140929] ACPI: bus type pnp registered
[ 16.145273] pnpacpi: exceeded the max number of mem resources: 12
[ 16.145354] pnp: PnP ACPI: found 16 devices
[ 16.145357] ACPI: ACPI bus type pnp unregistered
[ 16.145362] PnPBIOS: Disabled by ACPI PNP
[ 16.145681] PCI: Using ACPI for IRQ routing
[ 16.145685] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 16.171037] NET: Registered protocol family 8
[ 16.171040] NET: Registered protocol family 20
[ 16.171178] hpet clockevent registered
[ 16.171185] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 16.171191] hpet0: 3 64-bit timers, 14318180 Hz
[ 16.172235] AppArmor: AppArmor Filesystem Enabled
[ 16.174977] Time: tsc clocksource has been installed.
[ 16.183018] system 00:01: ioport range 0xb78-0xb7b has been reserved
[ 16.183022] system 00:01: ioport range 0xf78-0xf7b has been reserved
[ 16.183025] system 00:01: ioport range 0xa78-0xa7b has been reserved
[ 16.183028] system 00:01: ioport range 0xe78-0xe7b has been reserved
[ 16.183031] system 00:01: ioport range 0xbbc-0xbbf has been reserved
[ 16.183034] system 00:01: ioport range 0xfbc-0xfbf has been reserved
[ 16.183037] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 16.183040] system 00:01: ioport range 0x294-0x297 has been reserved
[ 16.183043] system 00:01: ioport range 0x4e0-0x4e7 has been reserved
[ 16.183058] system 00:0e: ioport range 0x400-0x4bf could not be reserved
[ 16.183066] system 00:0f: iomem range 0xcd000-0xcffff has been reserved
[ 16.183069] system 00:0f: iomem range 0xf0000-0xf7fff could not be reserved
[ 16.183072] system 00:0f: iomem range 0xf8000-0xfbfff could not be reserved
[ 16.183075] system 00:0f: iomem range 0xfc000-0xfffff could not be reserved
[ 16.183079] system 00:0f: iomem range 0x3fff0000-0x3fffffff could not be reserved
[ 16.183082] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[ 16.183085] system 00:0f: iomem range 0x100000-0x3ffeffff could not be reserved
[ 16.183088] system 00:0f: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 16.183092] system 00:0f: iomem range 0xfec01000-0xfed8ffff could not be reserved
[ 16.183095] system 00:0f: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 16.183098] system 00:0f: iomem range 0xffb00000-0xffbfffff could not be reserved
[ 16.183102] system 00:0f: iomem range 0xfff00000-0xffffffff could not be reserved
[ 16.213629] PCI: Bridge: 0000:00:01.0
[ 16.213634] IO window: c000-cfff
[ 16.213641] MEM window: f8000000-f9ffffff
[ 16.213645] PREFETCH window: e8000000-f7ffffff
[ 16.213653] PCI: Bridge: 0000:00:1e.0
[ 16.213656] IO window: d000-dfff
[ 16.213662] MEM window: fa000000-fbffffff
[ 16.213667] PREFETCH window: disabled.
[ 16.213687] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 16.213699] NET: Registered protocol family 2
[ 16.250935] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 16.251307] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 16.252036] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 16.252395] TCP: Hash tables configured (established 131072 bind 65536)
[ 16.252398] TCP reno registered
[ 16.263034] checking if image is initramfs... it is
[ 16.674143] Switched to high resolution mode on CPU 0
[ 16.978813] Freeing initrd memory: 7323k freed
[ 16.979654] audit: initializing netlink socket (disabled)
[ 16.979672] audit(1223722021.416:1): initialized
[ 16.979882] highmem bounce pool size: 64 pages
[ 16.982452] VFS: Disk quotas dquot_6.5.1
[ 16.982550] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 16.982717] io scheduler noop registered
[ 16.982720] io scheduler anticipatory registered
[ 16.982723] io scheduler deadline registered
[ 16.982737] io scheduler cfq registered (default)
[ 16.982827] Boot video device is 0000:01:00.0
[ 16.983199] isapnp: Scanning for PnP cards...
[ 17.336836] isapnp: No Plug & Play device found
[ 17.378587] Real Time Clock Driver v1.12ac
[ 17.378711] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 17.378836] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 17.378983] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 17.379806] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 17.380131] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 17.381302] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 17.381389] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 17.381538] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 17.383888] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 17.383895] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 17.389006] mice: PS/2 mouse device common for all mice
[ 17.389160] EISA: Probing bus 0 at eisa.0
[ 17.389203] EISA: Detected 0 cards.
[ 17.389207] cpuidle: using governor ladder
[ 17.389211] cpuidle: using governor menu
[ 17.389305] NET: Registered protocol family 1
[ 17.389337] Using IPI No-Shortcut mode
[ 17.389371] registered taskstats version 1
[ 17.389479] Magic number: 12:146:780
[ 17.389551] hash matches device ptyq2
[ 17.389581] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 17.389583] EDD information not available.
[ 17.389842] Freeing unused kernel memory: 368k freed
[ 17.416834] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 18.766442] fuse init (API version 7.9)
[ 18.926247] ACPI: Fan [FAN] (on)
[ 18.970154] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 18.988931] ACPI: Thermal Zone [THRM] (22 C)
[ 20.141307] usbcore: registered new interface driver usbfs
[ 20.141340] usbcore: registered new interface driver hub
[ 20.160014] usbcore: registered new device driver usb
[ 20.171683] USB Universal Host Controller Interface driver v3.0
[ 20.171756] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 20.171771] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 20.171776] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 20.172042] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 20.172073] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e300
[ 20.172240] usb usb1: configuration #1 chosen from 1 choice
[ 20.172273] hub 1-0:1.0: USB hub found
[ 20.172281] hub 1-0:1.0: 2 ports detected
[ 20.260109] SCSI subsystem initialized
[ 20.275914] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
[ 20.275932] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 20.275937] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 20.275971] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 20.276001] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e000
[ 20.276140] usb usb2: configuration #1 chosen from 1 choice
[ 20.276172] hub 2-0:1.0: USB hub found
[ 20.276180] hub 2-0:1.0: 2 ports detected
[ 20.324485] 8139too Fast Ethernet driver 0.9.28
[ 20.329037] libata version 3.00 loaded.
[ 20.379721] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 20.379738] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 20.379743] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 20.379776] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 20.379805] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e100
[ 20.379954] usb usb3: configuration #1 chosen from 1 choice
[ 20.379987] hub 3-0:1.0: USB hub found
[ 20.379996] hub 3-0:1.0: 2 ports detected
[ 20.426688] Floppy drive(s): fd0 is 1.44M
[ 20.451249] FDC 0 is a post-1991 82077
[ 20.483552] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
[ 20.483569] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 20.483574] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 20.483606] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 20.483633] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e200
[ 20.483776] usb usb4: configuration #1 chosen from 1 choice
[ 20.483810] hub 4-0:1.0: USB hub found
[ 20.483818] hub 4-0:1.0: 2 ports detected
[ 20.515387] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 20.587573] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
[ 20.587591] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 20.587596] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 20.587628] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 20.591551] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[ 20.591562] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfc000000
[ 20.607226] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 20.607392] usb usb5: configuration #1 chosen from 1 choice
[ 20.607427] hub 5-0:1.0: USB hub found
[ 20.607436] hub 5-0:1.0: 8 ports detected
[ 20.711252] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 22 (level, low) -> IRQ 20
[ 20.711969] eth0: RealTek RTL8139 at 0xd000, 00:04:61:53:ff:02, IRQ 20
[ 20.711972] eth0: Identified 8139 chip type 'RTL-8101'
[ 20.715111] ata_piix 0000:00:1f.2: version 2.12
[ 20.715117] ata_piix 0000:00:1f.2: MAP [ P0 P1 IDE IDE ]
[ 20.715134] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18
[ 20.715180] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 20.717151] scsi0 : ata_piix
[ 20.718099] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 20.718976] scsi1 : ata_piix
[ 20.719782] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 20.719786] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 20.883108] ata1.00: ATA-6: ST3160827AS, 3.42, max UDMA/133
[ 20.883113] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 20.899076] ata1.00: configured for UDMA/133
[ 21.158264] usb 5-1: new high speed USB device using ehci_hcd and address 2
[ 21.382202] ata2.00: ATAPI: HL-DT-STDVD-RAM GSA-H54L, 1.00, max UDMA/66
[ 21.382241] ata2.01: ATAPI: AOPEN CD-RW CRW4852 1.00 20030123, 1.00, max UDMA/33
[ 21.469700] usb 5-1: configuration #1 chosen from 1 choice
[ 21.553853] ata2.00: configured for UDMA/66
[ 21.709257] usb 5-2: new high speed USB device using ehci_hcd and address 3
[ 21.725472] ata2.01: configured for UDMA/33
[ 21.725626] scsi 0:0:0:0: Direct-Access ATA ST3160827AS 3.42 PQ: 0 ANSI: 5
[ 21.727331] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H54L 1.00 PQ: 0 ANSI: 5
[ 21.734597] scsi 1:0:1:0: CD-ROM AOPEN CD-RW CRW4852 1.00 PQ: 0 ANSI: 5
[ 21.757231] Driver 'sd' needs updating - please use bus_type methods
[ 21.757343] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 21.757363] sd 0:0:0:0: [sda] Write Protect is off
[ 21.757367] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 21.757395] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 21.757460] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 21.757477] sd 0:0:0:0: [sda] Write Protect is off
[ 21.757480] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 21.757508] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 21.757512] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 21.771367] sda1 sda2 < sda5 >
[ 21.794658] sd 0:0:0:0: [sda] Attached SCSI disk
[ 21.802837] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 21.802866] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 21.802890] scsi 1:0:1:0: Attached scsi generic sg2 type 5
[ 21.806577] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 21.806584] Uniform CD-ROM driver Revision: 3.20
[ 21.806649] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 21.827974] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 21.828045] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 21.872323] usb 5-2: configuration #1 chosen from 1 choice
[ 22.108656] usbcore: registered new interface driver libusual
[ 22.115462] Initializing USB Mass Storage driver...
[ 22.116936] scsi2 : SCSI emulation for USB Mass Storage devices
[ 22.117835] usbcore: registered new interface driver usb-storage
[ 22.117841] USB Mass Storage support registered.
[ 22.117946] usb-storage: device found at 3
[ 22.117949] usb-storage: waiting for device to settle before scanning
[ 22.164892] Attempting manual resume
[ 22.164897] swsusp: Resume From Partition 8:5
[ 22.164899] PM: Checking swsusp image.
[ 22.165083] PM: Resume from disk failed.
[ 22.208482] kjournald starting. Commit interval 5 seconds
[ 22.208498] EXT3-fs: mounted filesystem with ordered data mode.
[ 22.392060] usb 2-2: new full speed USB device using uhci_hcd and address 2
[ 22.570027] usb 2-2: configuration #1 chosen from 1 choice
[ 27.109322] usb-storage: device scan complete
[ 27.122669] scsi 2:0:0:0: Direct-Access OTi CF CARD Reader 2.00 PQ: 0 ANSI: 0 CCS
[ 27.136014] scsi 2:0:0:1: Direct-Access OTi SM CARD Reader 2.00 PQ: 0 ANSI: 0 CCS
[ 27.383681] scsi 2:0:0:2: Direct-Access OTi SD CARD Reader 2.00 PQ: 0 ANSI: 0 CCS
[ 27.384166] scsi 2:0:0:3: Direct-Access OTi MS CARD Reader 2.00 PQ: 0 ANSI: 0 CCS
[ 27.385704] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 27.385752] sd 2:0:0:0: Attached scsi generic sg3 type 0
[ 27.386803] sd 2:0:0:1: [sdc] Attached SCSI removable disk
[ 27.386843] sd 2:0:0:1: Attached scsi generic sg4 type 0
[ 27.388884] sd 2:0:0:2: [sdd] 2012160 512-byte hardware sectors (1030 MB)
[ 27.389509] sd 2:0:0:2: [sdd] Write Protect is off
[ 27.389513] sd 2:0:0:2: [sdd] Mode Sense: 03 00 00 00
[ 27.389515] sd 2:0:0:2: [sdd] Assuming drive cache: write through
[ 27.392128] sd 2:0:0:2: [sdd] 2012160 512-byte hardware sectors (1030 MB)
[ 27.392752] sd 2:0:0:2: [sdd] Write Protect is off
[ 27.392755] sd 2:0:0:2: [sdd] Mode Sense: 03 00 00 00
[ 27.392757] sd 2:0:0:2: [sdd] Assuming drive cache: write through
[ 27.392761] sdd: sdd1
[ 27.393949] sd 2:0:0:2: [sdd] Attached SCSI removable disk
[ 27.393989] sd 2:0:0:2: Attached scsi generic sg5 type 0
[ 27.395039] sd 2:0:0:3: [sde] Attached SCSI removable disk
[ 27.395079] sd 2:0:0:3: Attached scsi generic sg6 type 0
[ 30.619011] Linux agpgart interface v0.102
[ 30.685542] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 30.745876] agpgart: Detected an Intel 865 Chipset.
[ 30.752355] agpgart: AGP aperture is 128M @ 0xe0000000
[ 30.802054] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 31.112911] input: Power Button (FF) as /devices/virtual/input/input2
[ 31.124730] ACPI: Power Button (FF) [PWRF]
[ 31.124877] input: Power Button (CM) as /devices/virtual/input/input3
[ 31.140679] ACPI: Power Button (CM) [PWRB]
[ 31.496087] iTCO_vendor_support: vendor-support=0
[ 31.544816] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 31.544981] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0460)
[ 31.545040] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 31.711703] intel_rng: FWH not detected
[ 32.997554] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04A9 pid 0x1072
[ 32.997577] usbcore: registered new interface driver usblp
[ 33.240738] Linux video capture interface: v2.00
[ 33.525513] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 33.525624] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 33.525635] saa7134[0]: found at 0000:02:01.0, rev: 1, irq: 18, latency: 32, mmio: 0xfb001000
[ 33.525643] saa7134[0]: subsystem: 5168:0138, board: LifeView FlyVIDEO3000 [card=2,autodetected]
[ 33.525654] saa7134[0]: board init: gpio is 39000
[ 33.525657] saa7134[0]: there are different flyvideo cards with different tuners
[ 33.525659] saa7134[0]: out there, you might have to use the tuner=<nr> insmod
[ 33.525660] saa7134[0]: option to override the default value.
[ 33.525759] input: saa7134 IR (LifeView FlyVIDEO30 as /devices/pci0000:00/0000:00:1e.0/0000:02:01.0/input/input4
[ 33.676220] saa7134[0]: i2c eeprom 00: 68 51 38 01 10 28 ff ff ff ff ff ff ff ff ff ff
[ 33.676235] saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 33.676248] saa7134[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 33.676260] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 33.676272] saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 33.676284] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 33.676296] saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 33.676308] saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 33.899838] tuner 0-0061: chip found @ 0xc2 (saa7134[0])
[ 33.899872] tuner-simple 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
[ 33.899876] tuner 0-0061: type set to Philips PAL_BG (FI1
[ 33.899880] tuner-simple 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
[ 33.899884] tuner 0-0061: type set to Philips PAL_BG (FI1
[ 33.902389] saa7134[0]: registered device video0 [v4l2]
[ 33.902415] saa7134[0]: registered device vbi0
[ 33.902442] saa7134[0]: registered device radio0
[ 34.025640] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 35.020051] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6
[ 35.248302] parport_pc 00:09: reported by Plug and Play ACPI
[ 35.248353] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 35.531005] saa7134 ALSA driver for DMA sound loaded
[ 35.531042] saa7134[0]/alsa: saa7134[0] at 0xfb001000 irq 18 registered as card -2
[ 35.567373] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 21
[ 35.567404] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 35.888347] intel8x0_measure_ac97_clock: measured 54697 usecs
[ 35.888353] intel8x0: clocking to 48000
[ 37.391606] lp0: using parport0 (interrupt-driven).
[ 37.465278] Adding 3028212k swap on /dev/sda5. Priority:-1 extents:1 across:3028212k
[ 38.036144] EXT3 FS on sda1, internal journal
[ 39.422273] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 40.072690] No dock devices found.
[ 41.381948] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 41.381955] apm: overridden by ACPI.
[ 41.507395] ppdev: user-space parallel port driver
[ 41.680576] audit(1223722046.493:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5136 profile="/usr/sbin/cupsd" namespace="default"
[ 42.423237] NET: Registered protocol family 10
[ 42.423798] lo: Disabled Privacy Extensions
[ 44.029067] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 44.140447] Bluetooth: Core ver 2.11
[ 44.141137] NET: Registered protocol family 31
[ 44.141142] Bluetooth: HCI device and connection manager initialized
[ 44.141147] Bluetooth: HCI socket layer initialized
[ 44.162261] Bluetooth: L2CAP ver 2.9
[ 44.162267] Bluetooth: L2CAP socket layer initialized
[ 44.222148] Bluetooth: RFCOMM socket layer initialized
[ 44.222166] Bluetooth: RFCOMM TTY layer initialized
[ 44.222169] Bluetooth: RFCOMM ver 1.8
[ 46.199128] [drm] Initialized drm 1.1.0 20060810
[ 46.204645] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 46.204996] [drm] Initialized radeon 1.28.0 20060524 on minor 0
[ 47.297127] NET: Registered protocol family 17
[ 47.782926] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[ 47.783213] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 47.783443] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 48.149387] [drm] Setting GART location based on new memory map
[ 48.149398] [drm] Loading R200 Microcode
[ 48.149445] [drm] writeback test succeeded in 1 usecs
[ 61.041149] eth0: no IPv6 routers present
[ 485.495224] FAT: Filesystem panic (dev sdd1)
[ 485.495234] fat_get_cluster: invalid cluster chain (i_pos 0)
[ 485.495239] File system has been set read-only
[ 491.020407] FAT: Filesystem panic (dev sdd1)
[ 491.020417] fat_get_cluster: invalid cluster chain (i_pos 0)
[ 871.057961] FAT: Filesystem panic (dev sdd1)
[ 871.057970] fat_get_cluster: invalid cluster chain (i_pos 0)
[ 950.468932] FAT: Filesystem panic (dev sdd1)
[ 950.468942] fat_get_cluster: invalid cluster chain (i_pos 0)
[ 957.050450] FAT: Filesystem panic (dev sdd1)
[ 957.050460] fat_get_cluster: invalid cluster chain (i_pos 0)
[ 1012.330900] FAT: Filesystem panic (dev sdd1)
[ 1012.330909] fat_get_cluster: invalid cluster chain (i_pos 0)
[ 1195.456500] FAT: Filesystem panic (dev sdd1)
[ 1195.456509] fat_get_cluster: invalid cluster chain (i_pos 0)
[ 1258.954900] FAT: Filesystem panic (dev sdd1)
[ 1258.954910] fat_get_cluster: invalid cluster chain (i_pos 0)
[ 1272.721004] sd 2:0:0:2: [sdd] 2012160 512-byte hardware sectors (1030 MB)
[ 1272.722003] sd 2:0:0:2: [sdd] Write Protect is off
[ 1272.722073] sd 2:0:0:2: [sdd] Mode Sense: 03 00 00 00
[ 1272.722076] sd 2:0:0:2: [sdd] Assuming drive cache: write through
[ 1272.723623] sd 2:0:0:2: [sdd] 2012160 512-byte hardware sectors (1030 MB)
[ 1272.724294] sd 2:0:0:2: [sdd] Write Protect is off
[ 1272.724299] sd 2:0:0:2: [sdd] Mode Sense: 03 00 00 00
[ 1272.724302] sd 2:0:0:2: [sdd] Assuming drive cache: write through
[ 1272.724306] sdd: sdd1
[ 1274.378245] FAT: Filesystem panic (dev sdd1)
[ 1274.378254] fat_get_cluster: invalid cluster chain (i_pos 0)
[ 1274.378259] File system has been set read-only
[ 1274.379931] FAT: Filesystem panic (dev sdd1)
[ 1274.379938] fat_get_cluster: invalid cluster chain (i_pos 0)
[ 1275.360787] FAT: Filesystem panic (dev sdd1)
[ 1275.360796] fat_get_cluster: invalid cluster chain (i_pos 0)
[ 1275.362949] FAT: Filesystem panic (dev sdd1)
[ 1275.362956] fat_get_cluster: invalid cluster chain (i_pos 0)
[ 1290.677921] sd 2:0:0:2: [sdd] 2012160 512-byte hardware sectors (1030 MB)
[ 1290.678920] sd 2:0:0:2: [sdd] Write Protect is off
[ 1290.678926] sd 2:0:0:2: [sdd] Mode Sense: 03 00 00 00
[ 1290.678930] sd 2:0:0:2: [sdd] Assuming drive cache: write through
[ 1290.680128] sd 2:0:0:2: [sdd] 2012160 512-byte hardware sectors (1030 MB)
[ 1290.680790] sd 2:0:0:2: [sdd] Write Protect is off
[ 1290.680795] sd 2:0:0:2: [sdd] Mode Sense: 03 00 00 00
[ 1290.680798] sd 2:0:0:2: [sdd] Assuming drive cache: write through
[ 1290.680803] sdd: sdd1
[ 1292.346445] FAT: Filesystem panic (dev sdd1)
[ 1292.346455] fat_get_cluster: invalid cluster chain (i_pos 0)
[ 1292.346460] File system has been set read-only
[ 1292.348086] FAT: Filesystem panic (dev sdd1)
[ 1292.348092] fat_get_cluster: invalid cluster chain (i_pos 0)
[ 1293.310939] FAT: Filesystem panic (dev sdd1)
[ 1293.310948] fat_get_cluster: invalid cluster chain (i_pos 0)
[ 1293.318993] FAT: Filesystem panic (dev sdd1)
[ 1293.319003] fat_get_cluster: invalid cluster chain (i_pos 0)
[ 1296.701464] FAT: Filesystem panic (dev sdd1)
[ 1296.701474] fat_get_cluster: invalid cluster chain (i_pos 0)
petr@AMOUR:~$
Téma: Paměťová karta - nelze mazat a upravovat soubory (Přečteno 4674 krát)