Fórum Ubuntu CZ/SK
Ubuntu pro osobní počítače => Internet a sítě => Téma založeno: zdenek_vz800 04 Února 2014, 20:45:11
-
Zkousel jsem na 12.04 pouzit:
iperf -c xxx.xxx.xxx.xxx -i1 -t10 -u -b50M -d
a vyhodi mi to WARNING: did not recieve ack of last datagram after 10 tries.
netusi nekdo co s tim? Predem vsem diky
-
más na druhé straně zapnutý iperf -s ? jinak to nebude fungovat
-
mam
-
pár odpovědí v angličtině:
http://goo.gl/AKbjeD (http://goo.gl/AKbjeD)
-
Google samozrejme znam :-) - ale tam neni zadne konkretni reseni, resp. me nic nepomaha a to jsem prolistoval nekolik stranek...
-
jeden návod říká použít verzi z repo a nekomprimovanou, to je sice starý, ale možná aktuální.
Metodou pokus omyl jsem přišel na to, že se jedná o chybu na straně serveru.
iperf.acd.net - dává tvojí chybu
159.16.237.138 - dává tvojí chybu
iperf.scottlinux.com
iperf -c iperf.scottlinux.com -i1 -t10 -u -b50M -d
------------------------------------------------------------
Server listening on UDP port 5001
Receiving 1470 byte datagrams
UDP buffer size: 176 KByte (default)
------------------------------------------------------------
------------------------------------------------------------
Client connecting to iperf.scottlinux.com, UDP port 5001
Sending 1470 byte datagrams
UDP buffer size: 176 KByte (default)
------------------------------------------------------------
[ 4] local 192.168.0.107 port 47866 connected with 173.230.156.66 port 5001
[ ID] Interval Transfer Bandwidth
[ 4] 0.0- 1.0 sec 5.97 MBytes 50.0 Mbits/sec
[ 4] 1.0- 2.0 sec 5.97 MBytes 50.0 Mbits/sec
[ 4] 2.0- 3.0 sec 5.88 MBytes 49.3 Mbits/sec
[ 4] 3.0- 4.0 sec 5.97 MBytes 50.0 Mbits/sec
[ 4] 4.0- 5.0 sec 5.97 MBytes 50.0 Mbits/sec
[ 4] 5.0- 6.0 sec 5.97 MBytes 50.1 Mbits/sec
[ 4] 6.0- 7.0 sec 5.97 MBytes 50.0 Mbits/sec
[ 4] 7.0- 8.0 sec 5.97 MBytes 50.0 Mbits/sec
[ 4] 8.0- 9.0 sec 5.97 MBytes 50.1 Mbits/sec
[ 4] 9.0-10.0 sec 5.96 MBytes 50.0 Mbits/sec
[ 4] 0.0-10.0 sec 59.6 MBytes 50.0 Mbits/sec
[ 4] Sent 42488 datagrams
[ 4] Server Report:
[ 4] 0.0-10.9 sec 1.34 MBytes 1.03 Mbits/sec 20.274 ms 41495/42451 (98%)
[ 4] 0.0-10.9 sec 1 datagrams received out-of-order
iperf -c iperf.scottlinux.com -i1 -t10 -u -b50M -d -C
s parametrem -C funguje bezchybně:)
Takže by to možná chtělo na serveru přidat -C?
-
aha takze zkusit starsi verzi iperfu a nebo na strne serveru pustit iperf jinak? k serveru se totiz hure dostanu...
-
nejdřív můžeš zkusit k tomu tvému příkazu přidat -C
-C, --compatibility for use with older versions does not sent extra msgs
a pokud ani to nepomůže tak zapnout -C na serveru
-
takze sem to zkousel s -C a sice se ted nezasekl a dobehl, ale stale to pise hlasku WARNING: did not recieve ack of last datagram after 10 tries. a na konci to nevypise diagnostiku/sumarizaci - resp. Server report
a kupodivu iperf -c iperf.scottlinux.com -i1 -t10 -u -b50M -d funguje i bez -C korektne