[ 1.003948] io scheduler noop registered
[ 1.003950] io scheduler deadline registered (default)
[ 1.003980] io scheduler cfq registered
[ 1.004148] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 1.004201] pcieport 0000:00:07.0: irq 41 for MSI/MSI-X
[ 1.004262] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.004284] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.004329] vesafb: mode is 1152x864x32, linelength=4608, pages=0
[ 1.004330] vesafb: scrolling: redraw
[ 1.004333] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 1.004503] vesafb: framebuffer at 0xd0000000, mapped to 0xf8480000, using 3904k, total 3904k
[ 1.021481] Console: switching to colour frame buffer device 144x54
[ 1.038354] fb0: VESA VGA frame buffer device
[ 1.038380] ipmi message handler version 39.2
[ 1.038461] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.038466] ACPI: Power Button [PWRB]
[ 1.038504] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.038507] ACPI: Power Button [PWRF]
[ 1.038540] ACPI: duty_cycle spans bit 4
[ 1.038625] GHES: HEST is not enabled!
[ 1.038690] isapnp: Scanning for PnP cards...
[ 1.044078] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.064611] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 1.065758] Linux agpgart interface v0.103
[ 1.067220] brd: module loaded
[ 1.067812] loop: module loaded
[ 1.068339] libphy: Fixed MDIO Bus: probed
[ 1.068461] tun: Universal TUN/TAP device driver, 1.6
[ 1.068462] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.068497] PPP generic driver version 2.4.2
[ 1.068535] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.068539] ehci-pci: EHCI PCI platform driver
[ 1.068691] ehci-pci 0000:00:13.5: EHCI Host Controller
[ 1.068697] ehci-pci 0000:00:13.5: new USB bus registered, assigned bus number 1
[ 1.068703] ehci-pci 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[ 1.068718] ehci-pci 0000:00:13.5: debug port 1
[ 1.068771] ehci-pci 0000:00:13.5: irq 19, io mem 0xfe8ff000
[ 1.080024] ehci-pci 0000:00:13.5: USB 2.0 started, EHCI 1.00
[ 1.080109] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.080112] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.080114] usb usb1: Product: EHCI Host Controller
[ 1.080116] usb usb1: Manufacturer: Linux 3.13.0-35-generic ehci_hcd
[ 1.080118] usb usb1: SerialNumber: 0000:00:13.5
[ 1.080219] hub 1-0:1.0: USB hub found
[ 1.080227] hub 1-0:1.0: 10 ports detected
[ 1.080431] ehci-platform: EHCI generic platform driver
[ 1.080442] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.080444] ohci-pci: OHCI PCI platform driver
[ 1.080537] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.080542] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 1.080567] ohci-pci 0000:00:13.0: irq 16, io mem 0xfe8fe000
[ 1.140052] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.140055] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.140057] usb usb2: Product: OHCI PCI host controller
[ 1.140059] usb usb2: Manufacturer: Linux 3.13.0-35-generic ohci_hcd
[ 1.140061] usb usb2: SerialNumber: 0000:00:13.0
[ 1.140172] hub 2-0:1.0: USB hub found
[ 1.140182] hub 2-0:1.0: 2 ports detected
[ 1.140388] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 1.140394] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 1.140425] ohci-pci 0000:00:13.1: irq 17, io mem 0xfe8fd000
[ 1.200036] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.200039] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.200041] usb usb3: Product: OHCI PCI host controller
[ 1.200043] usb usb3: Manufacturer: Linux 3.13.0-35-generic ohci_hcd
[ 1.200045] usb usb3: SerialNumber: 0000:00:13.1
[ 1.200121] hub 3-0:1.0: USB hub found
[ 1.200130] hub 3-0:1.0: 2 ports detected
[ 1.200267] ohci-pci 0000:00:13.2: OHCI PCI host controller
[ 1.200274] ohci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 1.200296] ohci-pci 0000:00:13.2: irq 18, io mem 0xfe8fc000
[ 1.260038] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.260040] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.260042] usb usb4: Product: OHCI PCI host controller
[ 1.260044] usb usb4: Manufacturer: Linux 3.13.0-35-generic ohci_hcd
[ 1.260046] usb usb4: SerialNumber: 0000:00:13.2
[ 1.260127] hub 4-0:1.0: USB hub found
[ 1.260136] hub 4-0:1.0: 2 ports detected
[ 1.260279] ohci-pci 0000:00:13.3: OHCI PCI host controller
[ 1.260284] ohci-pci 0000:00:13.3: new USB bus registered, assigned bus number 5
[ 1.260299] ohci-pci 0000:00:13.3: irq 17, io mem 0xfe8fb000
[ 1.320037] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.320040] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.320042] usb usb5: Product: OHCI PCI host controller
[ 1.320044] usb usb5: Manufacturer: Linux 3.13.0-35-generic ohci_hcd
[ 1.320046] usb usb5: SerialNumber: 0000:00:13.3
[ 1.320131] hub 5-0:1.0: USB hub found
[ 1.320140] hub 5-0:1.0: 2 ports detected
[ 1.320281] ohci-pci 0000:00:13.4: OHCI PCI host controller
[ 1.320286] ohci-pci 0000:00:13.4: new USB bus registered, assigned bus number 6
[ 1.320301] ohci-pci 0000:00:13.4: irq 18, io mem 0xfe8fa000
[ 1.349203] isapnp: No Plug & Play device found
[ 1.380033] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.380035] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.380037] usb usb6: Product: OHCI PCI host controller
[ 1.380040] usb usb6: Manufacturer: Linux 3.13.0-35-generic ohci_hcd
[ 1.380042] usb usb6: SerialNumber: 0000:00:13.4
[ 1.380144] hub 6-0:1.0: USB hub found
[ 1.380152] hub 6-0:1.0: 2 ports detected
[ 1.380235] ohci-platform: OHCI generic platform driver
[ 1.380249] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.380337] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.382528] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.382534] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.382685] mousedev: PS/2 mouse device common for all mice
[ 1.382868] rtc_cmos 00:01: RTC can wake from S4
[ 1.383008] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.383032] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram
[ 1.383113] device-mapper: uevent: version 1.0.3
[ 1.383192] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 1.383217] platform eisa.0: Probing EISA bus 0
[ 1.383220] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 1.383222] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 1.383225] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 1.383227] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 1.383229] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 1.383232] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 1.383235] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 1.383237] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 1.383240] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 1.383242] platform eisa.0: EISA: Detected 0 cards
[ 1.383252] cpufreq-nforce2: No nForce2 chipset.
[ 1.383255] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.383386] TCP: cubic registered
[ 1.383481] NET: Registered protocol family 10
[ 1.383672] NET: Registered protocol family 17
[ 1.383683] Key type dns_resolver registered
[ 1.383844] Using IPI No-Shortcut mode
[ 1.383982] Loading compiled-in X.509 certificates
[ 1.387290] Loaded X.509 cert 'Magrathea: Glacier signing key: a28db5fd6e299cce4947dacaa66f459db4acce24'
[ 1.387303] registered taskstats version 1
[ 1.389822] Key type trusted registered
[ 1.391868] Key type encrypted registered
[ 1.394013] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.394019] IMA: No TPM chip found, activating TPM-bypass!
[ 1.394520] regulator-dummy: disabling
[ 1.394577] Magic number: 14:732:269
[ 1.394686] rtc_cmos 00:01: setting system clock to 2014-09-02 08:16:51 UTC (1409645811)
[ 1.394768] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[ 1.394768] [Firmware Bug]: powernow-k8: First, make sure Cool'N'Quiet is enabled in the BIOS.
[ 1.394768] [Firmware Bug]: powernow-k8: If that doesn't help, try upgrading your BIOS.
[ 1.394781] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.394782] EDD information not available.
[ 1.394807] PM: Hibernation image not present or could not be loaded.
[ 1.395318] Freeing unused kernel memory: 872K (c19b9000 - c1a93000)
[ 1.395364] Write protecting the kernel text: 6540k
[ 1.395437] Write protecting the kernel read-only data: 2768k
[ 1.395439] NX-protecting the kernel data: 5748k
[ 1.410157] systemd-udevd[96]: starting version 204
[ 1.413747] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.441629] ahci 0000:00:12.0: version 3.0
[ 1.441777] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 1.441863] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.441866] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.442694] scsi0 : ahci
[ 1.442776] scsi1 : ahci
[ 1.442834] scsi2 : ahci
[ 1.442891] scsi3 : ahci
[ 1.442932] ata1: SATA max UDMA/133 abar m1024@0xfe8ff800 port 0xfe8ff900 irq 22
[ 1.442935] ata2: SATA max UDMA/133 abar m1024@0xfe8ff800 port 0xfe8ff980 irq 22
[ 1.442938] ata3: SATA max UDMA/133 abar m1024@0xfe8ff800 port 0xfe8ffa00 irq 22
[ 1.442941] ata4: SATA max UDMA/133 abar m1024@0xfe8ff800 port 0xfe8ffa80 irq 22
[ 1.445907] Floppy drive(s): fd0 is 1.44M
[ 1.462239] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.462253] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.462482] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
[ 1.462668] r8169 0000:02:00.0 eth0: RTL8168b/8111b at 0xf8450000, 00:1d:92:32:13:0d, XID 18000000 IRQ 42
[ 1.462671] r8169 0000:02:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 1.464108] scsi4 : pata_atiixp
[ 1.466088] scsi5 : pata_atiixp
[ 1.466147] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.466150] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.474451] FDC 0 is a post-1991 82077
[ 1.560069] firewire_ohci 0000:03:06.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 1.680034] usb 2-2: new low-speed USB device number 2 using ohci-pci
[ 1.764035] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.768040] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.844074] usb 2-2: New USB device found, idVendor=04b4, idProduct=0033
[ 1.844077] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.854158] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.866510] usbcore: registered new interface driver usbhid
[ 1.866514] usbhid: USB HID core driver
[ 1.870994] input: HID 04b4:0033 as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.0/input/input5
[ 1.871449] hid-generic 0003:04B4:0033.0001: input,hidraw0: USB HID v1.00 Mouse [HID 04b4:0033] on usb-0000:00:13.0-2/input0
[ 1.932027] ata1: softreset failed (device not ready)
[ 1.932032] ata1: applying PMP SRST workaround and retrying
[ 1.940038] ata3: softreset failed (device not ready)
[ 1.940043] ata3: applying PMP SRST workaround and retrying
[ 2.068115] firewire_core 0000:03:06.0: created device fw0: GUID 00dc100001298eba, S400
[ 2.104030] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.104962] ata1.00: ATA-8: WDC WD2500AAKX-00ERMA0, 15.01H15, max UDMA/133
[ 2.104965] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.104970] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.105990] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.105993] ata1.00: configured for UDMA/133
[ 2.106171] scsi 0:0:0:0: Direct-Access ATA WDC WD2500AAKX-0 15.0 PQ: 0 ANSI: 5
[ 2.106369] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.106398] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.106429] sd 0:0:0:0: [sda] Write Protect is off
[ 2.106432] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.106457] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.112054] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.124476] ata3.00: ATAPI: LITE-ON DVDRW LH-20A1S, 9L08, max UDMA/100
[ 2.124480] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.137429] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.137432] ata3.00: configured for UDMA/100
[ 2.139355] scsi 2:0:0:0: CD-ROM LITE-ON DVDRW LH-20A1S 9L08 PQ: 0 ANSI: 5
[ 2.141926] sda: sda1 sda2 < sda5 >
[ 2.142321] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.142367] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.142370] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.142473] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.142539] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 2.414326] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.960433] random: init urandom read with 84 bits of entropy available
[ 3.865566] random: nonblocking pool is initialized
[ 7.294268] Adding 2095100k swap on /dev/sda5. Priority:-1 extents:1 across:2095100k FS
[ 7.396889] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.607898] systemd-udevd[275]: starting version 204
[ 8.169509] lp: driver loaded but no devices found
[ 8.180034] ppdev: user-space parallel port driver
[ 8.334437] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 8.401232] kvm: Nested Virtualization enabled
[ 8.440869] ACPI Warning: 0x00000b00-0x00000b07 SystemIO conflicts with Region \SMOV 1 (20131115/utaddress-251)
[ 8.440878] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.486441] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 8.486530] sp5100_tco: PCI Revision ID: 0x14
[ 8.486552] sp5100_tco: failed to find MMIO address, giving up.
[ 8.533826] [drm] Initialized drm 1.1.0 20060810
[ 8.555992] type=1400 audit(1409645818.656:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=312 comm="apparmor_parser"
[ 8.556042] type=1400 audit(1409645818.656:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=312 comm="apparmor_parser"
[ 8.556047] type=1400 audit(1409645818.660:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=312 comm="apparmor_parser"
[ 8.556068] type=1400 audit(1409645818.660:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=330 comm="apparmor_parser"
[ 8.556079] type=1400 audit(1409645818.660:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=330 comm="apparmor_parser"
[ 8.556084] type=1400 audit(1409645818.660:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=330 comm="apparmor_parser"
[ 8.556560] type=1400 audit(1409645818.660:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=312 comm="apparmor_parser"
[ 8.556567] type=1400 audit(1409645818.660:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=312 comm="apparmor_parser"
[ 8.556589] type=1400 audit(1409645818.660:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=330 comm="apparmor_parser"
[ 8.556595] type=1400 audit(1409645818.660:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=330 comm="apparmor_parser"
[ 8.818348] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 9.056683] [drm] radeon kernel modesetting enabled.
[ 9.056765] checking generic (d0000000 3d0000) vs hw (d0000000 10000000)
[ 9.056767] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[ 9.056831] Console: switching to colour dummy device 80x25
[ 9.057166] [drm] initializing kernel modesetting (RV630 0x1002:0x9588 0x1043:0x01C4).
[ 9.057183] [drm] register mmio base: 0xFE9F0000
[ 9.057184] [drm] register mmio size: 65536
[ 9.058723] ATOM BIOS: 9588.10.57.0.2.AS13
[ 9.058751] radeon 0000:01:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
[ 9.058755] radeon 0000:01:00.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
[ 9.058757] [drm] Detected VRAM RAM=256M, BAR=256M
[ 9.058759] [drm] RAM width 128bits DDR
[ 9.059091] [TTM] Zone kernel: Available graphics memory: 440270 kiB
[ 9.059093] [TTM] Zone highmem: Available graphics memory: 1032050 kiB
[ 9.059095] [TTM] Initializing pool allocator
[ 9.059099] [TTM] Initializing DMA pool allocator
[ 9.059123] [drm] radeon: 256M of VRAM memory ready
[ 9.059124] [drm] radeon: 512M of GTT memory ready.
[ 9.059137] [drm] Loading RV630 Microcode
[ 9.182359] hda-intel 0000:00:14.2: Using LPIB position fix
[ 9.185370] hda-intel 0000:00:14.2: Enable sync_write for stable communication
[ 9.223058] SKU: Nid=0x1d sku_cfg=0x4007f603
[ 9.223063] SKU: port_connectivity=0x1
[ 9.223064] SKU: enable_pcbeep=0x0
[ 9.223066] SKU: check_sum=0x00000007
[ 9.223073] SKU: customization=0x000000f6
[ 9.223074] SKU: external_amp=0x0
[ 9.223076] SKU: platform_type=0x0
[ 9.223077] SKU: swap=0x1
[ 9.223078] SKU: override=0x1
[ 9.223473] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 9.223475] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.223476] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 9.223478] mono: mono_out=0x0
[ 9.223479] dig-out=0x1e/0x0
[ 9.223480] inputs:
[ 9.223483] Front Mic=0x19
[ 9.223491] Rear Mic=0x18
[ 9.223492] Line=0x1a
[ 9.223494] realtek: No valid SSID, checking pincfg 0x4007f603 for NID 0x1d
[ 9.223496] realtek: Enabling init ASM_ID=0xf603 CODEC_ID=10ec0888
[ 9.237012] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[ 9.237185] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 9.237322] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 9.237455] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 9.237591] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 9.237728] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 9.237863] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 9.237998] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 9.314399] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 9.331115] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 9.331155] radeon 0000:01:00.0: WB enabled
[ 9.331159] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000010000c00 and cpu addr 0xf1f89c00
[ 9.331162] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000010000c0c and cpu addr 0xf1f89c0c
[ 9.331165] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 9.331166] [drm] Driver supports precise vblank timestamp query.
[ 9.331195] radeon 0000:01:00.0: irq 43 for MSI/MSI-X
[ 9.331211] radeon 0000:01:00.0: radeon: using MSI.
[ 9.331241] [drm] radeon: irq initialized.
[ 9.362346] [drm] ring test on 0 succeeded in 1 usecs
[ 9.362404] [drm] ring test on 3 succeeded in 1 usecs
[ 9.362520] [drm] Enabling audio 0 support
[ 9.362540] [drm] ib test on ring 0 succeeded in 0 usecs
[ 9.362557] [drm] ib test on ring 3 succeeded in 0 usecs
[ 9.363242] [drm] Radeon Display Connectors
[ 9.363245] [drm] Connector 0:
[ 9.363246] [drm] DVI-I-1
[ 9.363247] [drm] HPD1
[ 9.363250] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 9.363251] [drm] Encoders:
[ 9.363252] [drm] DFP1: INTERNAL_KLDSCP_TMDS1
[ 9.363254] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 9.363255] [drm] Connector 1:
[ 9.363256] [drm] DIN-1
[ 9.363257] [drm] Encoders:
[ 9.363258] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 9.363260] [drm] Connector 2:
[ 9.363261] [drm] DVI-I-2
[ 9.363262] [drm] HPD2
[ 9.363264] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 9.363265] [drm] Encoders:
[ 9.363266] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 9.363268] [drm] DFP2: INTERNAL_LVTM1
[ 9.363281] [drm] Internal thermal controller with fan control
[ 9.363343] [drm] radeon: power management initialized
[ 9.430514] [drm] fb mappable at 0xD0141000
[ 9.430518] [drm] vram apper at 0xD0000000
[ 9.430519] [drm] size 5324800
[ 9.430521] [drm] fb depth is 24
[ 9.430522] [drm] pitch is 5888
[ 9.435058] fbcon: radeondrmfb (fb0) is primary device
[ 9.469175] Console: switching to colour frame buffer device 180x56
[ 9.477149] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 9.477150] radeon 0000:01:00.0: registered panic notifier
[ 9.478260] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0
[ 9.478394] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 9.478396] hda-intel 0000:01:00.1: Using LPIB position fix
[ 9.478452] snd_hda_intel 0000:01:00.1: irq 44 for MSI/MSI-X
[ 9.484972] hda-intel 0000:01:00.1: Enable sync_write for stable communication
[ 9.542325] HDMI ATI/AMD: no speaker allocation for ELD
[ 9.542416] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
[ 9.569131] init: failsafe main process (519) killed by TERM signal
[ 10.347764] init: cups main process (630) killed by HUP signal
[ 10.347779] init: cups main process ended, respawning
[ 10.655421] Bluetooth: Core ver 2.17
[ 10.655450] NET: Registered protocol family 31
[ 10.655452] Bluetooth: HCI device and connection manager initialized
[ 10.655462] Bluetooth: HCI socket layer initialized
[ 10.655466] Bluetooth: L2CAP socket layer initialized
[ 10.655477] Bluetooth: SCO socket layer initialized
[ 10.800540] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 10.800546] Bluetooth: BNEP filters: protocol multicast
[ 10.800557] Bluetooth: BNEP socket layer initialized
[ 10.845237] Bluetooth: RFCOMM TTY layer initialized
[ 10.845251] Bluetooth: RFCOMM socket layer initialized
[ 10.845263] Bluetooth: RFCOMM ver 1.11
[ 11.505355] r8169 0000:02:00.0 eth0: link down
[ 11.505374] r8169 0000:02:00.0 eth0: link down
[ 11.505459] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.505950] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.134800] r8169 0000:02:00.0 eth0: link up
[ 13.134812] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 13.759147] init: plymouth-upstart-bridge main process ended, respawning
[ 13.768411] init: plymouth-upstart-bridge main process (1053) terminated with status 1
[ 13.768427] init: plymouth-upstart-bridge main process ended, respawning
[ 40.290390] audit_printk_skb: 123 callbacks suppressed
[ 40.290396] type=1400 audit(1409645851.839:53): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1530 comm="apparmor_parser"
[ 40.290405] type=1400 audit(1409645851.839:54): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1530 comm="apparmor_parser"
[ 40.290919] type=1400 audit(1409645851.839:55): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1530 comm="apparmor_parser"