Fórum Ubuntu CZ/SK
Ostatní => Archiv => Téma založeno: kiko 21 Října 2007, 00:03:45
-
Zdravim,
potrebujem pomoct s rozchodenim tlaciarne HP Photosmart C4180 pod Ubuntu 7.10. Skusal som instalaciu pomocou stadartnych metod (System -> Administration -> Printers -> New Printer, aj cez hp-setup), ale ani jedna nezabrala. Proste mi zariadenie nenajde.
Dakujem za pomoc.
hplip - verzia 2.7.10
vypis z dmesg
[ 2223.080000] usb 2-2: new high speed USB device using ehci_hcd and address 18
[ 2223.192000] usb 2-2: device descriptor read/64, error -71
[ 2224.168000] hub 2-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
[ 2224.280000] usb 2-2: new high speed USB device using ehci_hcd and address 19
[ 2225.152000] hub 2-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
[ 2225.264000] usb 2-2: new high speed USB device using ehci_hcd and address 20
[ 2225.672000] usb 2-2: device not accepting address 20, error -71
[ 2225.784000] usb 2-2: new high speed USB device using ehci_hcd and address 21
[ 2226.192000] usb 2-2: device not accepting address 21, error -71
[ 2235.252000] usb 2-2: new high speed USB device using ehci_hcd and address 22
[ 2235.364000] usb 2-2: device descriptor read/64, error -71
[ 2236.340000] hub 2-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
[ 2236.452000] usb 2-2: new high speed USB device using ehci_hcd and address 23
[ 2237.324000] hub 2-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
[ 2237.436000] usb 2-2: new high speed USB device using ehci_hcd and address 24
[ 2237.844000] usb 2-2: device not accepting address 24, error -71
[ 2237.956000] usb 2-2: new high speed USB device using ehci_hcd and address 25
[ 2238.364000] usb 2-2: device not accepting address 25, error -71
[ 2243.492000] usb 2-2: new high speed USB device using ehci_hcd and address 26
[ 2243.604000] usb 2-2: device descriptor read/64, error -71
[ 2244.580000] hub 2-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
[ 2244.692000] usb 2-2: new high speed USB device using ehci_hcd and address 27
[ 2245.564000] hub 2-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
[ 2245.676000] usb 2-2: new high speed USB device using ehci_hcd and address 28
[ 2246.084000] usb 2-2: device not accepting address 28, error -71
[ 2246.196000] usb 2-2: new high speed USB device using ehci_hcd and address 29
[ 2246.604000] usb 2-2: device not accepting address 29, error -71
[ 2471.356000] usb 2-2: new high speed USB device using ehci_hcd and address 30
[ 2472.228000] hub 2-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
[ 2472.340000] usb 2-2: new high speed USB device using ehci_hcd and address 31
[ 2472.452000] usb 2-2: device descriptor read/64, error -71
[ 2472.668000] usb 2-2: device descriptor read/64, error -71
[ 2472.884000] usb 2-2: new high speed USB device using ehci_hcd and address 32
[ 2473.292000] usb 2-2: device not accepting address 32, error -71
[ 2473.404000] usb 2-2: new high speed USB device using ehci_hcd and address 33
[ 2473.812000] usb 2-2: device not accepting address 33, error -71
[ 2499.108000] usb 2-2: new high speed USB device using ehci_hcd and address 34
[ 2499.980000] hub 2-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
[ 2500.092000] usb 2-2: new high speed USB device using ehci_hcd and address 35
[ 2500.204000] usb 2-2: device descriptor read/64, error -71
[ 2501.180000] hub 2-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
[ 2501.292000] usb 2-2: new high speed USB device using ehci_hcd and address 36
[ 2501.700000] usb 2-2: device not accepting address 36, error -71
[ 2501.812000] usb 2-2: new high speed USB device using ehci_hcd and address 37
[ 2502.220000] usb 2-2: device not accepting address 37, error -71
[ 2535.548000] usb 2-2: new high speed USB device using ehci_hcd and address 38
[ 2535.660000] usb 2-2: device descriptor read/64, error -71
[ 2536.636000] hub 2-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
[ 2536.748000] usb 2-2: new high speed USB device using ehci_hcd and address 39
[ 2536.860000] usb 2-2: device descriptor read/64, error -71
[ 2537.076000] usb 2-2: device descriptor read/64, error -71
[ 2537.292000] usb 2-2: new high speed USB device using ehci_hcd and address 40
[ 2537.700000] usb 2-2: device not accepting address 40, error -71
[ 2537.812000] usb 2-2: new high speed USB device using ehci_hcd and address 41
[ 2538.220000] usb 2-2: device not accepting address 41, error -71
-
Tahle tiskarna potrebuje driver hpijs: http://openprinting.org/show_printer.cgi?recnum=HP-PhotoSmart_C4100
Doufam, ze to bude fungovat...
-
Citujem z http://openprinting.org/show_printer.cgi?recnum=HP-PhotoSmart_C4100 (http://openprinting.org/show_printer.cgi?recnum=HP-PhotoSmart_C4100)
For basic printing functionality use the HPIJS driver . For advanced functionality such as printer status, maintenance features, and photo card unload use the HPLIP driver (which includes HPIJS).
Teda mam naistalovany aj HPIJS driver.
-
Citujem z http://openprinting.org/show_printer.cgi?recnum=HP-PhotoSmart_C4100 (http://openprinting.org/show_printer.cgi?recnum=HP-PhotoSmart_C4100)
For basic printing functionality use the HPIJS driver . For advanced functionality such as printer status, maintenance features, and photo card unload use the HPLIP driver (which includes HPIJS).
Teda mam naistalovany aj HPIJS driver.
Na te strance je i driver primo pro tu tiskarnu, ten taky???
-
Ano, ten ovladac som uz instaloval.
-
Ano, ten ovladac som uz instaloval.
A nic? Ja musel na HP1018 stahnout a zavest firmware do ubuntu, co se mrknout a zjistit, zda to nepotrebuje to same?
-
Este k tomu ovladacu. Stiahol som si aj PPD subor a dal ho do /usr/share/hplip/data/ a aj som ho naistaloval (System > Administration > Printers > New Printer).
-
Este k tomu ovladacu. Stiahol som si aj PPD subor a dal ho do /usr/share/hplip/data/ a aj som ho naistaloval (System > Administration > Printers > New Printer).
A ten firmware? Uz jsem psal, ze na HP laserjet 1018 jsem ho musel stahnout rucne, je mozne, ze bude chybet i na jinych tiskarnach..