Fórum Ubuntu CZ/SK
Ubuntu pro osobní počítače => Obecná podpora => Téma založeno: Ancestor 26 Července 2008, 22:07:36
-
Takže sem zeditoval xorg takto>
#nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@yellow) Thu Jun 5 09:27:12 UTC 2008
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "ACI ASUS VW193D"
HorizSync 30.0 - 83.0
VertRefresh 55.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8800 GTS"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "1440x900_80 +0+0; nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Ale zdá se mi,že stejně je to na oči nepříjemné.Zkontrolujte mi ten xorg pls jěště díky moc :)
-
Trošku sem to změnil,ale i tak,zdá se že to 80hz není.Tady je rozsah frekvencí mýho monitoru,myslíte,že můžu zkusit alespoň 90?A nebo by stačilo 80 ale mám někde chybu a proto se nenastavily?dik.
Vodorovná Svislá Pixel
1440 x 900 55,935 KHz 60 Hz 106,5 MHz
WXGA+
1440 x 900 70,635 KHz 75 Hz 136,75 MHz
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@yellow) Thu Jun 5 09:27:12 UTC 2008
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "ACI ASUS VW193D"
HorizSync 30.0 - 83.0
VertRefresh 55.0 - 75.0
Option "DPMS"
# 1440x900 @ 80.00 Hz (GTF) hsync: 75.36 kHz; pclk: 147.10 MHz
Modeline "1440x900_80.00" 147.10 1440 1536 1696 1952 900 901 904 942 -HSync +Vsync
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8800 GTS"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "1440x900_80 +0+0; nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
-
Skutocnu frekvenciu u nvidie si zistis prikazom
nvidia-settings -q RefreshRate
-
hm ja třo tusil takze co ted lidi
Attribute 'RefreshRate' (lukas-desktop:0.0; display device: CRT-0): 60,17
Hz.
'RefreshRate' is an integer attribute.
'RefreshRate' is a read-only attribute.
'RefreshRate' is display device specific.
'RefreshRate' can use the following target types: X Screen, GPU.
-
Aku verziu ubuntu pouzivas? Ak to nechas nadetekovat automaticky(povodny xorg.conf) a nastavis ju cez nvidia-settings, co to pise? Aku frekvenciu.
-
Aku verziu ubuntu pouzivas? Ak to nechas nadetekovat automaticky(povodny xorg.conf) a nastavis ju cez nvidia-settings, co to pise? Aku frekvenciu.
Mam 8.04 Najel sem do systém>správa>nvidia x server settings a mam tam na vyber bud 60 nebo 75,dal sem 75 a apply,blik vypada ok,jenze me nejde ulozit.Kdyz dam save to X configiration file tak me to napise Unable to remove old X config backup file '/etc/X11/xorg.conf.backup'.
Takze sem si dal náhled,zkopcil to a podle toho editoval rucne xorg ale po restartu mi to azse vypisuje 60 jak predchili.Pritom v xorgu je nastavenoSection "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "ACI ASUS VW193D"
HorizSync 30.0 - 83.0
VertRefresh 55.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8800 GTS"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "1440x900_75 +0+0; nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
-
Ak to spustas cez system-sprava ... tak to nema prava na zapis. Musis to spustat cez terminal prikazom
gksu nvidia-settingsPripadne system-predvolby-hlavne menu tam sprava a pravym na ten spustac. Vlastnosti a v policku prikaz dat pred prikaz gksu. Po tomto sa ti cez menu bude spustat s pravom zapisu.
-
Pořád nic,po restartu je to opět na 60!!Hm takze me tu asi nikdo neporadí.To s ebudu muset zase vratit k xp jen kvůli o frekvenci??No ták.
-
Tak fajn tohle je to nahrazeni xp jak se pise?ignorace nastveni xorgu a takova primitivnost jako nastaveni o frekvence to ani nezvladne,takze s ubuntu koncim podruhy a uz nefinitivne.Boze to je system,a podpora na forech jeste lepsi.
-
podle mě to má být
gksudo nvidia-settingsjestli se mýlím, tak mě opravte, tak jak to tady bylo to zřejmě nefungovalo...