Fórum Ubuntu CZ/SK
Ubuntu pro osobní počítače => Hardware => Téma založeno: incredible 26 Října 2008, 08:25:00
-
Dobrý den, prohledal jsem snad všechny fora a nikde jsem nic podobého nenašel, stalo se asi toto. Při přehrávání muziky v programu Rhythmbox jsem se podíval do systém/správa/služby a koukal jsem co všechno se spouští po startu, zakšrtnul jsem alsa ovládání zvuku(bylo odfajfkované) a od té doby mi nejde zvuk.nejde alsa, ani pulse audio, oba dva testy ve volby/zvuk/ a test tak nejdou, jenom chrčej, jediné co jde jsou oss ovladače, ale ty bohužel nedokáží zpustit video a zvuk +pluspřehrávač jen hudby najednou, ani nedjou videa na internetu, všechno chrčí, už bohužel nevím kam se obrátit. mám acer aspire 5102awlmi.a Ubuntu 8.10+nejnovější update.Děkuji Vám
už jsem tento dotaz dával do vlíkna zvuk, video a hry, ale nikdo neodpovídá a já si opravdu nevím rady
A toto mi to vypisuje při restartu pulse audia pahejl@pahejl-laptop:~$ pulseaudio &
[1] 7716
pahejl@pahejl-laptop:~$ W: ltdl-bind-now.c: Failed to find original dlopen loader.
W: main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
W: main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
ALSA lib control.c:909:(snd_ctl_open_noupdate) Invalid CTL front:0
ALSA lib control.c:909:(snd_ctl_open_noupdate) Invalid CTL front:0
Prosím, neexistuje nějaký způsob jak to celé restartoat? t ovladače? aby se zavedly jako při instalaci?
-
Skúste toto http://noskonotes.blogspot.com/2008/10/ubuntu-problmy-s-pulseaudio-serverom-od.html
-
Toto už jsem zkoušel a výsledek pořád stejný, mě nejdejenom alsa, mě nejde alsa ani pusle audio, vůbec nevím co stím, dokonce jsem v balíčcích zkusil alsu odstranit a znova jí nainstalovat a stále nic, pros bych potřeboval nahodit alsu a puse audio od začátku, nějaký resetkdyby byl, jako kdybych odinstaloval zvukovku a znova jí nahodil, jenže nevím jak:-(
-
A pokud tak udělám a otestuju pulse audio vypíše to audiotestsrc wave=sine freq=512 ! audioconvert ! audioresample ! gconfaudiosink: Failed to connect: Connection refused co je dobře podle mě protože je to kill proces,a le asla nic nedělá:-( jen zase oss
-
když zadám v terminálo pulseaudio vypíše to tohle
W: ltdl-bind-now.c: Failed to find original dlopen loader.
W: main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
W: main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
E: alsa-util.c: Error opening PCM device hw:0: Device or resource busy
E: module.c: Failed to load module "module-alsa-sink" (argument: "device_id=0 sink_name=alsa_output.pci_1002_437b_sound_card_0_alsa_playback_0"): initialization failed.
ALSA lib control.c:909:(snd_ctl_open_noupdate) Invalid CTL front:0
-
a při slovu alsa
pahejl@pahejl-laptop:~$ alsa
Usage: /sbin/alsa {unload|reload|force-unload|force-reload|suspend|resume}
opravdu už nevít zkouším všechno
-
W: ltdl-bind-now.c: Failed to find original dlopen loader.
W: main.c: This program is not intended to be run as root (unless --system is specified).
E: alsa-util.c: Error opening PCM device hw:0: Device or resource busy
E: module.c: Failed to load module "module-alsa-sink" (argument: "device_id=0 sink_name=alsa_output.pci_1002_437b_sound_card_0_alsa_playback_0"): initialization failed.
ALSA lib control.c:909:(snd_ctl_open_noupdate) Invalid CTL front:0
-
Skúste späť ALSU v službách odštrknúť a nastaviť ALSU podľa môjho návodu. Je dôležité, aby ste robili testy zvuku s VYPNUTÝMI všetkými aplikáciami používajucimi zvuk, vrátane Firefoxu.
-
bohužel nic, mě chrčí stejně alsa, jako pulse audio..pořád to nic nedělá, zkusil jsem i restart se zašrtnutou i odškrtnutou alsou, dělal jsem i procesy killall alsa killall pulse audio a taky nic.....Oss fungujou dobře, ale nejdou zvuky v internetu a v systému, idkyž mám nastavené všude oss, při startu systém a uvodní obrazovce to chrčí. jako by byla alsa i pulse audio poškozené, nejde je nějak přeinstalovat?
-
/edit/ Skúste zmazať ~/.pulse
/edit2/ https://www.linuxquestions.org/questions/linux-hardware-18/restoring-alsa-settings-to-default-225243/
-
Tak tam jsem opravdu nic nenašel :(
Ale v systém souboru/etc/alsa je alsa conf a vní je toto
### ALSA source configuration file ###
# (This file is in GNU makefile format)
# List the card drivers to be built, separated by commas. For example,
# if you want to build the drivers for the Sound Blaster 16 and the
# Yamaha YMF cards then write:
# ALSA_CARDS="sb16, ymfpci"
# The special name "all" results in all card drivers being built.
#
ifndef ALSA_CARDS
ALSA_CARDS="all"
endif
# List the card driver options, separated by commas, all on one line.
# The special name "all" results in all possible options being set.
#
# This is an advanced feature. See ALSA's documentation for more info.
#
ifndef ALSA_CARD_OPTIONS
ALSA_CARD_OPTIONS=""
endif
# Set to "y" if you want to build the modules without ISA PnP support.
# Otherwise, set to "".
#
ifndef ALSA_NOPNP
ALSA_NOPNP=""
endif
# Set to "y" if you want to build the modules with debugging code.
# Otherwise, set to "".
#
ifndef ALSA_DEBUG
ALSA_DEBUG=""
endif
a ve složce pulse je pulse conf daemon.conf a default.pa
promiňte že je to tak dlouhé, neví zda to bude potřeba
Pulse-conf# $Id: client.conf.in 2030 2007-11-08 22:31:30Z lennart $
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
# USA.
## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
## more information. Default values a commented out. Use either ; or # for
## commenting.
; default-sink =
; default-source =
; default-server =
; autospawn = no
; daemon-binary = /usr/bin/pulseaudio
; extra-arguments = --log-target=syslog --exit-idle-time=5
; cookie-file =
; disable-shm = no
DAEMON-CONF
$Id: daemon.conf.in 2175 2008-03-27 23:39:10Z lennart $
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
# USA.
## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
## more information. Default values a commented out. Use either ; or # for
## commenting.
; daemonize = no
; fail = yes
; disallow-module-loading = no
; use-pid-file = yes
; system-instance = no
; disable-shm = no
; high-priority = yes
; nice-level = -11
; realtime-scheduling = no
; realtime-priority = 5
; exit-idle-time = -1
; module-idle-time = 20
; scache-idle-time = 20
; dl-search-path = (depends on architecture)
; default-script-file =
; log-target = auto
; log-level = notice
resample-method = speex-float-1
; disable-remixing = no
; no-cpu-limit = no
; rlimit-as = -1
; rlimit-core = -1
; rlimit-data = -1
; rlimit-fsize = -1
; rlimit-nofile = 256
; rlimit-stack = -1
; rlimit-nproc = -1
; rlimit-memlock = -1
; rlimit-nice = 31
; rlimit-rtprio = 9
; default-sample-format = s16le
; default-sample-rate = 44100
; default-sample-channels = 2
default-fragments = 8
default-fragment-size-msec = 10
DEFAULT.PA
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software Foundation,
# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
.nofail
### Load something into the sample cache
#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
#load-sample-lazy pulse-access /usr/share/sounds/generic.wav
.fail
### Load audio drivers statically (it's probably better to not load
### these drivers manually, but instead use module-hal-detect --
### see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
#load-module module-null-sink
#load-module module-pipe-sink
### Automatically load driver modules depending on the hardware available
.ifexists module-hal-detect.so
load-module module-hal-detect
.else
### Alternatively use the static hardware detection module (for systems that
### lack HAL support)
load-module module-detect
.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish
### Load the RTP reciever module (also configured via paprefs, see above)
#load-module module-rtp-recv
### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 description="RTP Multicast Sink"
#load-module module-rtp-send source=rtp.monitor
### Load additional modules from GConf settings. This can be configured with the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict with manually
### loaded modules.
.ifexists module-gconf.so
.nofail
load-module module-gconf
.fail
.endif
### Automatically restore the volume of playback streams
load-module module-volume-restore
### Automatically restore the default sink/source when changed by the user during runtime
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### Load X11 bell module
#load-module module-x11-bell sample=x11-bell
### Register ourselves in the X11 session manager
# Deactivated by default, to avoid deadlock when PA is started as esd from gnome-session
# Instead we load this via /etc/xdg/autostart/ and "pactl load-module" now
# load-module module-x11-xsmp
### Publish connection data in the X11 root window
.ifexists module-x11-publish.so
.nofail
load-module module-x11-publish
.fail
.endif
### Make some devices default
#set-default-sink output
#set-default-source input
Děkuji a promiňte že je to tak dlouhé, jsou to výpisi těch dokumentů
-
Hm, takže nikdo asi neví:-( ani nevíte jak rstartovat ty ovladače?
-
Hm, takže nikdo asi neví:-( ani nevíte jak rstartovat ty ovladače?
Čítajte odkazy, už som to poslal predtým:
/edit2/ https://www.linuxquestions.org/questions/linux-hardware-18/restoring-alsa-settings-to-default-225243/