Fórum Ubuntu CZ/SK
Ubuntu pro osobní počítače => Hardware => Téma založeno: Marcelius 05 Listopadu 2008, 10:18:52
-
Zdravim,
uz nejaky ten den googlim a prehladavam fora ale nic... tak sa obraciam sem.
Mam USB externy hdd 320gb a HH/32. Po pripojeni hdd sa nestane nic. Vypis lsusb mi neukaze ziadne (nove) zariadenie.
V praci pouzivam Win a tam mi to v pohode slo. Hdd som odpojil spravne, na disku je NTFS. USB porty na mojom pc su v poriadku, pouzivam cez ne webku, mys... Kabel usb som menil, je v poriadku.
Proste mi Hardy vobec nevie zdetekovat usb hdd. Vie niekto poradit?
Vdaka.
-
a alespoň ten disk jeví nějakou aktivitu, svítí na něm diody, je slyšet že se točí???
není třeba možné že mátv usb slabé napětí?
-
hdd je napajany zo zdroja (220w), teda ma vlastny zdroj. Svieti ledka, pocut ze sa toci.
-
Co vypise
dmesg | tailpo pripojeni disku.
-
teraz som v praci, tak pozriem doma a napisem..
vdaka za radu
-
Posielam vypis z dmesg
lenka@lenka:~$ dmesg | tail
[ 39.787773] lo: Disabled Privacy Extensions
[ 44.173800] NET: Registered protocol family 17
[ 56.193006] eth0: no IPv6 routers present
[ 111.975180] UDF-fs: Partition marked readonly; forcing readonly mount
[ 112.020875] UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume 'Mandolina kpt Corelliho', timestamp 2036/02/07 02:58 (103c)
[ 113.715485] usb 2-8: new high speed USB device using ehci_hcd and address 3
[ 140.803147] kjournald starting. Commit interval 5 seconds
[ 140.803414] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 140.808321] EXT3 FS on sdb1, internal journal
[ 140.808332] EXT3-fs: mounted filesystem with ordered data mode.
lenka@lenka:~$
-
A co
fdisk -l
-
tak dalsi vypis..
lenka@lenka:~$ fdisk -l
lenka@lenka:~$ fdisk
Usage: fdisk [-l] [-b SSZ] [-u] device
E.g.: fdisk /dev/hda (for the first IDE disk)
or: fdisk /dev/sdc (for the third SCSI disk)
or: fdisk /dev/eda (for the first PS/2 ESDI drive)
or: fdisk /dev/rd/c0d0 or: fdisk /dev/ida/c0d0 (for RAID devices)
...
lenka@lenka:~$ fdisk -l
lenka@lenka:~$
-
teda skor toto..
lenka@lenka:~$ sudo fdisk -l
[sudo] password for lenka:
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000a8bd6
Device Boot Start End Blocks Id System
/dev/sda1 * 1 18244 146544898+ 83 Linux
/dev/sda2 18245 30037 94727272+ 83 Linux
/dev/sda3 30038 30401 2923830 82 Linux swap / Solaris
Disk /dev/sdb: 82.3 GB, 82348277760 bytes
255 heads, 63 sectors/track, 10011 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xdb017bef
Device Boot Start End Blocks Id System
/dev/sdb1 1 10011 80413326 83 Linux
lenka@lenka:~$
-
Ten disk je urcite naformatovan na NTFS ?
-
fyzický hardisk máte v počítači jeden? Pokud ano tak podle dmesg
vypadá to že ten externí je ten sdb1, ext3, jen 80GB
ukažde ještě výpis mount
pokud tam bude
/dev/sdb1 on něco type ext3
tak dejte
ls něco
je to ten disk?
//edit: pokud máte v PC disky dva, 250GB + 80GB tak počítač spusťte, až po naběhnutí do něj připojte ten externí a ukažte znovu výpis dmesg
-
Disk je na NTFS. Bol formatovany pod Win2k .
posielam vypis dmsg
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] Entering add_active_range(0, 0, 262064) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 262064
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262064
[ 0.000000] On node 0 totalpages: 262064
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 255 pages used for memmap
[ 0.000000] HighMem zone: 32433 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00FA650 checksum 0
[ 0.000000] ACPI: RSDP 000FA650, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 3FFB0000, 0034 (r1 A M I OEMRSDT 1000611 MSFT 97)
[ 0.000000] ACPI: FACP 3FFB0200, 0084 (r2 A M I OEMFACP 1000611 MSFT 97)
[ 0.000000] ACPI: DSDT 3FFB0440, 4D0C (r1 K8N62 K8N62160 160 INTL 2002026)
[ 0.000000] ACPI: FACS 3FFC0000, 0040
[ 0.000000] ACPI: APIC 3FFB0390, 0070 (r1 A M I OEMAPIC 1000611 MSFT 97)
[ 0.000000] ACPI: MCFG 3FFB0400, 003C (r1 A M I OEMMCFG 1000611 MSFT 97)
[ 0.000000] ACPI: OEMB 3FFC0040, 005E (r1 A M I AMI_OEM 1000611 MSFT 97)
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:12 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e8000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e8000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260017
[ 0.000000] Kernel command line: root=UUID=9fef2bd5-59d3-45ab-9485-0ae1b896fecb ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1607.360 MHz processor.
[ 15.959604] spurious 8259A interrupt: IRQ7.
[ 15.961848] Console: colour VGA+ 80x25
[ 15.961852] console [tty0] enabled
[ 15.962352] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 15.963203] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 15.989477] Memory: 1026724k/1048256k available (2177k kernel code, 20836k reserved, 1005k data, 368k init, 130752k highmem)
[ 15.989487] virtual kernel memory layout:
[ 15.989488] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 15.989490] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 15.989491] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 15.989492] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 15.989494] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
[ 15.989495] .data : 0xc03205e4 - 0xc041bdc4 (1005 kB)
[ 15.989497] .text : 0xc0100000 - 0xc03205e4 (2177 kB)
[ 15.989500] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 15.989545] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 16.069565] Calibrating delay using timer specific routine.. 3217.76 BogoMIPS (lpj=6435530)
[ 16.069599] Security Framework initialized
[ 16.069607] SELinux: Disabled at boot.
[ 16.069626] AppArmor: AppArmor initialized
[ 16.069630] Failure registering capabilities with primary security module.
[ 16.069640] Mount-cache hash table entries: 512
[ 16.069782] Initializing cgroup subsys ns
[ 16.069785] Initializing cgroup subsys cpuacct
[ 16.069797] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001 00000000
[ 16.069806] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 16.069809] CPU: L2 Cache: 256K (64 bytes/line)
[ 16.069812] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00020410 00000001 00000000 00000001 00000000
[ 16.069824] Compat vDSO mapped to ffffe000.
[ 16.069837] Checking 'hlt' instruction... OK.
[ 16.085889] SMP alternatives: switching to UP code
[ 16.087159] Freeing SMP alternatives: 11k freed
[ 16.087294] Early unpacking initramfs... done
[ 16.488616] ACPI: Core revision 20070126
[ 16.488696] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 16.491187] CPU0: AMD Sempron(tm) Processor 2800+ stepping 02
[ 16.491202] Total of 1 processors activated (3217.76 BogoMIPS).
[ 16.491509] ENABLING IO-APIC IRQs
[ 16.491757] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 16.637587] Brought up 1 CPUs
[ 16.637642] CPU0 attaching sched-domain:
[ 16.637645] domain 0: span 01
[ 16.637647] groups: 01
[ 16.637831] net_namespace: 64 bytes
[ 16.637839] Booting paravirtualized kernel on bare hardware
[ 16.638340] Time: 6:54:10 Date: 11/06/08
[ 16.638370] NET: Registered protocol family 16
[ 16.638551] EISA bus registered
[ 16.638580] ACPI: bus type pci registered
[ 16.639444] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
[ 16.639446] PCI: Using configuration type 1
[ 16.639453] Setting up standard PCI resources
[ 16.647684] ACPI: EC: Look up EC in DSDT
[ 16.653618] ACPI: Interpreter enabled
[ 16.653622] ACPI: (supports S0 S1 S3 S4 S5)
[ 16.653638] ACPI: Using IOAPIC for interrupt routing
[ 16.664840] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 16.665953] PCI: Transparent bridge - 0000:00:10.0
[ 16.665974] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 16.666209] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 16.666314] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 16.666417] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[ 16.666536] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 16.679479] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 16.679715] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 16.679945] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 16.680176] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 16.680408] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *11
[ 16.680639] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
[ 16.680870] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[ 16.681101] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
[ 16.681332] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *11
[ 16.681570] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
[ 16.681802] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11
[ 16.682033] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled.
[ 16.682267] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *11
[ 16.682498] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
[ 16.682733] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[ 16.682963] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *11
[ 16.683200] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
[ 16.683436] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled.
[ 16.683710] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 16.683844] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 15, should be E5 [20070126]
[ 16.683851] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 16.683881] pnp: PnP ACPI init
[ 16.683891] ACPI: bus type pnp registered
[ 16.690926] pnp: PnP ACPI: found 17 devices
[ 16.690931] ACPI: ACPI bus type pnp unregistered
[ 16.690935] PnPBIOS: Disabled by ACPI PNP
[ 16.691152] PCI: Using ACPI for IRQ routing
[ 16.691156] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 16.717542] NET: Registered protocol family 8
[ 16.717544] NET: Registered protocol family 20
[ 16.717618] AppArmor: AppArmor Filesystem Enabled
[ 16.721533] Time: tsc clocksource has been installed.
[ 16.729575] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[ 16.729579] system 00:0a: ioport range 0x800-0x80f has been reserved
[ 16.729582] system 00:0a: ioport range 0x4000-0x407f has been reserved
[ 16.729585] system 00:0a: ioport range 0x4080-0x40ff has been reserved
[ 16.729588] system 00:0a: ioport range 0x4400-0x447f has been reserved
[ 16.729591] system 00:0a: ioport range 0x4480-0x44ff has been reserved
[ 16.729595] system 00:0a: ioport range 0x4800-0x487f has been reserved
[ 16.729598] system 00:0a: ioport range 0x4880-0x48ff has been reserved
[ 16.729601] system 00:0a: ioport range 0x2000-0x207f has been reserved
[ 16.729604] system 00:0a: ioport range 0x2080-0x20ff has been reserved
[ 16.729608] system 00:0a: iomem range 0xfefe0000-0xfefe01ff has been reserved
[ 16.729611] system 00:0a: iomem range 0xfee01000-0xfeefffff could not be reserved
[ 16.729619] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 16.729622] system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 16.729625] system 00:0b: iomem range 0xfebc0000-0xfebfffff has been reserved
[ 16.729633] system 00:0e: ioport range 0x290-0x29f has been reserved
[ 16.729640] system 00:0f: iomem range 0xe0000000-0xefffffff has been reserved
[ 16.729647] system 00:10: iomem range 0x0-0x9ffff could not be reserved
[ 16.729651] system 00:10: iomem range 0xc0000-0xcffff could not be reserved
[ 16.729654] system 00:10: iomem range 0xe0000-0xfffff could not be reserved
[ 16.729657] system 00:10: iomem range 0x100000-0x3fffffff could not be reserved
[ 16.729661] system 00:10: iomem range 0xff000000-0xffffffff could not be reserved
[ 16.760062] PCI: Bridge: 0000:00:02.0
[ 16.760064] IO window: disabled.
[ 16.760068] MEM window: disabled.
[ 16.760070] PREFETCH window: disabled.
[ 16.760073] PCI: Bridge: 0000:00:03.0
[ 16.760074] IO window: disabled.
[ 16.760077] MEM window: disabled.
[ 16.760079] PREFETCH window: disabled.
[ 16.760082] PCI: Bridge: 0000:00:04.0
[ 16.760083] IO window: disabled.
[ 16.760086] MEM window: faa00000-feafffff
[ 16.760089] PREFETCH window: bff00000-dfefffff
[ 16.760092] PCI: Bridge: 0000:00:10.0
[ 16.760093] IO window: disabled.
[ 16.760097] MEM window: disabled.
[ 16.760099] PREFETCH window: disabled.
[ 16.760117] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 16.760126] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 16.760134] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 16.760142] PCI: Setting latency timer of device 0000:00:10.0 to 64
[ 16.760154] NET: Registered protocol family 2
[ 16.797615] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 16.797962] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 16.799091] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 16.799663] TCP: Hash tables configured (established 131072 bind 65536)
[ 16.799668] TCP reno registered
[ 16.809682] checking if image is initramfs... it is
[ 17.261500] Switched to high resolution mode on CPU 0
[ 17.582372] Freeing initrd memory: 7704k freed
[ 17.583006] audit: initializing netlink socket (disabled)
[ 17.583020] audit(1225954450.492:1): initialized
[ 17.583177] highmem bounce pool size: 64 pages
[ 17.584918] VFS: Disk quotas dquot_6.5.1
[ 17.584996] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 17.585148] io scheduler noop registered
[ 17.585150] io scheduler anticipatory registered
[ 17.585153] io scheduler deadline registered
[ 17.585168] io scheduler cfq registered (default)
[ 17.585185] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 17.585219] pci 0000:00:02.0: Enabling HT MSI Mapping
[ 17.585229] pci 0000:00:03.0: Enabling HT MSI Mapping
[ 17.585239] pci 0000:00:04.0: Enabling HT MSI Mapping
[ 17.585262] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 17.597417] pci 0000:00:0e.0: Enabling HT MSI Mapping
[ 17.597427] pci 0000:00:10.0: Enabling HT MSI Mapping
[ 17.597452] Boot video device is 0000:03:00.0
[ 17.597560] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 17.597586] assign_interrupt_mode Found MSI capability
[ 17.597609] Allocate Port Service[0000:00:02.0:pcie00]
[ 17.597675] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 17.597699] assign_interrupt_mode Found MSI capability
[ 17.597717] Allocate Port Service[0000:00:03.0:pcie00]
[ 17.597776] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 17.597801] assign_interrupt_mode Found MSI capability
[ 17.597818] Allocate Port Service[0000:00:04.0:pcie00]
[ 17.598051] isapnp: Scanning for PnP cards...
[ 17.951256] isapnp: No Plug & Play device found
[ 17.982893] Real Time Clock Driver v1.12ac
[ 17.983006] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 17.983141] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 17.983304] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 17.983906] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 17.984622] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 17.984687] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 17.984782] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 17.984785] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 17.985201] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 17.989528] mice: PS/2 mouse device common for all mice
[ 17.989646] EISA: Probing bus 0 at eisa.0
[ 17.989656] Cannot allocate resource for EISA slot 2
[ 17.989661] Cannot allocate resource for EISA slot 4
[ 17.989663] Cannot allocate resource for EISA slot 5
[ 17.989666] Cannot allocate resource for EISA slot 6
[ 17.989674] EISA: Detected 0 cards.
[ 17.989677] cpuidle: using governor ladder
[ 17.989679] cpuidle: using governor menu
[ 17.989774] NET: Registered protocol family 1
[ 17.989802] Using IPI No-Shortcut mode
[ 17.989838] registered taskstats version 1
[ 17.989958] Magic number: 0:7:923
[ 17.990141] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 17.990144] EDD information not available.
[ 17.990430] Freeing unused kernel memory: 368k freed
[ 17.990461] Write protecting the kernel read-only data: 801k
[ 18.017333] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 19.248895] fuse init (API version 7.9)
[ 19.270555] ACPI Exception (processor_core-0822): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 20.256832] usbcore: registered new interface driver usbfs
[ 20.256859] usbcore: registered new interface driver hub
[ 20.270325] usbcore: registered new device driver usb
[ 20.281181] SCSI subsystem initialized
[ 20.329003] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 20.329426] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[ 20.329437] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUB0] -> GSI 23 (level, low) -> IRQ 16
[ 20.329452] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 20.329456] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 20.329717] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
[ 20.329738] ohci_hcd 0000:00:0b.0: irq 16, io mem 0xfebbe000
[ 20.368967] libata version 3.00 loaded.
[ 20.387104] usb usb1: configuration #1 chosen from 1 choice
[ 20.387130] hub 1-0:1.0: USB hub found
[ 20.387139] hub 1-0:1.0: 8 ports detected
[ 20.478669] Floppy drive(s): fd0 is 1.44M
[ 20.489524] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 20.489538] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUB2] -> GSI 22 (level, low) -> IRQ 17
[ 20.489551] PCI: Setting latency timer of device 0000:00:0b.1 to 64
[ 20.489555] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[ 20.489585] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
[ 20.489617] ehci_hcd 0000:00:0b.1: debug port 1
[ 20.489621] PCI: cache line size of 64 is not supported by device 0000:00:0b.1
[ 20.489633] ehci_hcd 0000:00:0b.1: irq 17, io mem 0xfebbfc00
[ 20.500788] FDC 0 is a post-1991 82077
[ 20.500908] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 20.501041] usb usb2: configuration #1 chosen from 1 choice
[ 20.501066] hub 2-0:1.0: USB hub found
[ 20.501073] hub 2-0:1.0: 8 ports detected
[ 20.605126] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 20.605504] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
[ 20.605516] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 21 (level, low) -> IRQ 18
[ 20.605523] PCI: Setting latency timer of device 0000:00:14.0 to 64
[ 21.125274] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x20 @ 1, addr 00:13:8f:87:9a:7c
[ 21.125280] forcedeth 0000:00:14.0: highdma pwrctl timirq lnktim desc-v3
[ 21.125480] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 21.125862] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
[ 21.125873] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LSA0] -> GSI 20 (level, low) -> IRQ 19
[ 21.125894] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 21.125903] ACPI: PCI interrupt for device 0000:00:0e.0 disabled
[ 21.131192] sata_nv 0000:00:0e.0: version 3.5
[ 21.131213] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LSA0] -> GSI 20 (level, low) -> IRQ 19
[ 21.131266] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 21.135646] scsi0 : sata_nv
[ 21.136862] usb 1-3: new low speed USB device using ohci_hcd and address 2
[ 21.137935] scsi1 : sata_nv
[ 21.138135] ata1: SATA max UDMA/133 cmd 0xf80 ctl 0xf00 bmdma 0xe000 irq 19
[ 21.138139] ata2: SATA max UDMA/133 cmd 0xe80 ctl 0xe00 bmdma 0xe008 irq 19
[ 21.350951] usb 1-3: configuration #1 chosen from 1 choice
[ 21.371230] usbcore: registered new interface driver hiddev
[ 21.383051] input: HID 1241:1177 as /devices/pci0000:00/0000:00:0b.0/usb1/1-3/1-3:1.0/input/input2
[ 21.392800] input,hidraw0: USB HID v1.10 Mouse [HID 1241:1177] on usb-0000:00:0b.0-3
[ 21.392819] usbcore: registered new interface driver usbhid
[ 21.392823] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 21.604745] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 21.612987] ata1.00: ATA-7: SAMSUNG HD252HJ, 1AC01113, max UDMA7
[ 21.612991] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 21.620983] ata1.00: configured for UDMA/133
[ 22.088657] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 22.252793] ata2.00: ATAPI: Optiarc DVD RW AD-5200S, 1.05, max UDMA/100
[ 22.424767] ata2.00: configured for UDMA/100
[ 22.424890] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD252HJ 1AC0 PQ: 0 ANSI: 5
[ 22.426888] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-5200S 1.05 PQ: 0 ANSI: 5
[ 22.434197] pata_amd 0000:00:0d.0: version 0.3.10
[ 22.434257] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 22.435358] scsi2 : pata_amd
[ 22.435878] scsi3 : pata_amd
[ 22.437067] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 22.437071] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 22.446634] Driver 'sd' needs updating - please use bus_type methods
[ 22.446725] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 22.446737] sd 0:0:0:0: [sda] Write Protect is off
[ 22.446740] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 22.446756] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 22.446803] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 22.446812] sd 0:0:0:0: [sda] Write Protect is off
[ 22.446815] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 22.446828] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 22.446833] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 22.458970] sda1 sda2 sda3
[ 22.483870] sd 0:0:0:0: [sda] Attached SCSI disk
[ 22.490666] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 22.490686] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 22.495924] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 22.495931] Uniform CD-ROM driver Revision: 3.20
[ 22.495988] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 22.772834] ata3.00: ATAPI: HL-DT-STDVD-ROM GDR8164B, 0L06, max UDMA/33
[ 22.773021] ata3.01: ATA-7: HDS728080PLAT20, PF2OA2AA, max UDMA/133
[ 22.773025] ata3.01: 160836480 sectors, multi 16: LBA48
[ 22.944735] ata3.00: configured for UDMA/33
[ 22.968880] ata3.01: configured for UDMA/133
[ 23.153836] scsi 2:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8164B 0L06 PQ: 0 ANSI: 5
[ 23.169458] sr1: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[ 23.169504] sr 2:0:0:0: Attached scsi CD-ROM sr1
[ 23.169537] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 23.169931] scsi 2:0:1:0: Direct-Access ATA HDS728080PLAT20 PF2O PQ: 0 ANSI: 5
[ 23.170205] sd 2:0:1:0: [sdb] 160836480 512-byte hardware sectors (82348 MB)
[ 23.170217] sd 2:0:1:0: [sdb] Write Protect is off
[ 23.170220] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 23.170235] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 23.170278] sd 2:0:1:0: [sdb] 160836480 512-byte hardware sectors (82348 MB)
[ 23.170287] sd 2:0:1:0: [sdb] Write Protect is off
[ 23.170289] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 23.170303] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 23.170308] sdb: sdb1
[ 23.183198] sd 2:0:1:0: [sdb] Attached SCSI disk
[ 23.183233] sd 2:0:1:0: Attached scsi generic sg3 type 0
[ 23.459048] Attempting manual resume
[ 23.459053] swsusp: Resume From Partition 8:3
[ 23.459055] PM: Checking swsusp image.
[ 23.459241] PM: Resume from disk failed.
[ 23.500569] kjournald starting. Commit interval 5 seconds
[ 23.500582] EXT3-fs: mounted filesystem with ordered data mode.
[ 30.835261] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 30.887318] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 31.141309] input: Power Button (FF) as /devices/virtual/input/input3
[ 31.155137] ACPI: Power Button (FF) [PWRF]
[ 31.155293] input: Power Button (CM) as /devices/virtual/input/input4
[ 31.167137] ACPI: Power Button (CM) [PWRB]
[ 32.551486] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
[ 32.551516] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x6000
[ 32.602838] Linux agpgart interface v0.102
[ 33.240317] nvidia: module license 'NVIDIA' taints kernel.
[ 34.371567] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 35.015055] irda_init()
[ 35.015079] NET: Registered protocol family 23
[ 35.414892] parport_pc 00:07: reported by Plug and Play ACPI
[ 35.414956] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 35.681907] ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 19
[ 35.681921] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNEA] -> GSI 19 (level, low) -> IRQ 20
[ 35.681930] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 35.682186] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008
[ 35.808996] ACPI: PCI Interrupt Link [LACI] enabled at IRQ 23
[ 35.809003] ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LACI] -> GSI 23 (level, low) -> IRQ 16
[ 35.809028] PCI: Setting latency timer of device 0000:00:10.2 to 64
[ 36.130330] intel8x0_measure_ac97_clock: measured 54597 usecs
[ 36.130336] intel8x0: clocking to 46938
[ 37.617324] lp0: using parport0 (interrupt-driven).
[ 37.686649] Linux video capture interface: v2.00
[ 37.709290] usbcore: registered new interface driver gspca
[ 37.709297] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: gspca driver 01.00.20 registered
[ 37.734528] usbcore: registered new interface driver msicam
[ 37.734534] /home/lenka/Download/Software/msicam/gspca_core.c: gspca driver 01.00.20 registered
[ 37.796584] Adding 2923820k swap on /dev/sda3. Priority:-1 extents:1 across:2923820k
[ 38.360965] EXT3 FS on sda1, internal journal
[ 39.147265] kjournald starting. Commit interval 5 seconds
[ 39.147500] EXT3 FS on sda2, internal journal
[ 39.147505] EXT3-fs: mounted filesystem with ordered data mode.
[ 39.707252] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 40.207875] No dock devices found.
[ 40.500030] powernow-k8: Power state transitions not supported
[ 41.452389] apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
[ 41.452395] apm: overridden by ACPI.
[ 43.480194] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 43.480201] vboxdrv: Successfully done.
[ 43.480203] vboxdrv: Found 1 processor cores.
[ 43.480206] vboxdrv: fAsync=0 u64DiffCores=1.
[ 43.480835] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 43.480839] vboxdrv: Successfully loaded version 1.6.6 (interface 0x00080000).
[ 43.893467] NET: Registered protocol family 10
[ 43.893720] lo: Disabled Privacy Extensions
[ 48.346100] NET: Registered protocol family 17
[ 60.195128] eth0: no IPv6 routers present
[ 92.503908] UDF-fs: No VRS found
[ 2378.394790] usb 2-8: new high speed USB device using ehci_hcd and address 3
lenka@lenka:~$
-
fyzicky mam 2 hdd: 250gb a 80gb
-
Když jste dal "dmesg | tail" a "sudo fdisk -l", bylo to po opětovném zapojení toho disku? Je to dynamický log, takže reaguje v real čase. Pokud ne, zopakujte to.
-
Ano, dmesg a fdisk som pouzil po opetovnom zapojeni hdd.