Fórum Ubuntu CZ/SK
Ubuntu pro osobní počítače => Hardware => Téma založeno: makosch 13 Března 2009, 18:20:11
-
prosím o pomoc - mám notebook benq joybook s32 a nefunguje mi čtečka karet, ani integrovaná, ani externí. počítač kartu prostě "nevidí", takže nevím, jak se dostat k datům z karty. nevíte někdo co s tím? díky za pomoc
-
niečo sme sa pokúšali riešiť aj tu: http://forum.ubuntu.cz/index.php/topic,33234.0.html
obzri to
-
Zdravim
Doplnim informace :
Ta interni ctecka fungovala bajecne na hardym, stacilo strcit kartu a okamzite se otevrelo okno, jako kdyz se pripoji flashdisk. Ted na interpidu (ten s etedy povedl, to vam reknu :-\ ) ani tuk
Tu ctecku system vidi :
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 03)
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 03)
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 03)
00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03)
00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03)
00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03)
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 03)
00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 03)
00:1c.5 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 [8086:2849] (rev 03)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 03)
00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03)
00:1f.2 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller [8086:2828] (rev 03)
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03)
02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller [11ab:4363] (rev 12)
06:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter [168c:001c] (rev 01)
08:01.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 05)
08:01.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 22)
08:01.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 12)
08:01.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 12)
08:01.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev ff)
A kdyz tam strcime kartu tak se na par sekund rozsviti jedna LEDka na notebooku - a pak zase zhasne.
A vypis dmesg
[ 2.455310] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:06
[ 2.455312] pci 0000:00:1c.4: IO window: disabled
[ 2.455319] pci 0000:00:1c.4: MEM window: 0xf4200000-0xf42fffff
[ 2.455324] pci 0000:00:1c.4: PREFETCH window: disabled
[ 2.455332] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:07
[ 2.455335] pci 0000:00:1c.5: IO window: disabled
[ 2.455341] pci 0000:00:1c.5: MEM window: disabled
[ 2.455346] pci 0000:00:1c.5: PREFETCH window: disabled
[ 2.455354] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08
[ 2.455357] pci 0000:00:1e.0: IO window: disabled
[ 2.455363] pci 0000:00:1e.0: MEM window: 0xf4400000-0xf44fffff
[ 2.455369] pci 0000:00:1e.0: PREFETCH window: disabled
[ 2.455386] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.455393] pci 0000:00:1c.0: setting latency timer to 64
[ 2.455404] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 2.455409] pci 0000:00:1c.1: setting latency timer to 64
[ 2.455419] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.455424] pci 0000:00:1c.4: setting latency timer to 64
[ 2.455434] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 2.455439] pci 0000:00:1c.5: setting latency timer to 64
[ 2.455448] pci 0000:00:1e.0: setting latency timer to 64
[ 2.455452] bus: 00 index 0 io port: [0, ffff]
[ 2.455454] bus: 00 index 1 mmio: [0, ffffffff]
[ 2.455457] bus: 02 index 0 io port: [2000, 2fff]
[ 2.455459] bus: 02 index 1 mmio: [f4300000, f43fffff]
[ 2.455461] bus: 02 index 2 mmio: [50000000, 500fffff]
[ 2.455464] bus: 02 index 3 mmio: [0, 0]
[ 2.455466] bus: 04 index 0 io port: [3000, 3fff]
[ 2.455468] bus: 04 index 1 mmio: [f2000000, f3ffffff]
[ 2.455470] bus: 04 index 2 mmio: [f0000000, f1ffffff]
[ 2.455473] bus: 04 index 3 mmio: [0, 0]
[ 2.455475] bus: 06 index 0 mmio: [0, 0]
[ 2.455477] bus: 06 index 1 mmio: [f4200000, f42fffff]
[ 2.455479] bus: 06 index 2 mmio: [0, 0]
[ 2.455481] bus: 06 index 3 mmio: [0, 0]
[ 2.455483] bus: 07 index 0 mmio: [0, 0]
[ 2.455485] bus: 07 index 1 mmio: [0, 0]
[ 2.455487] bus: 07 index 2 mmio: [0, 0]
[ 2.455489] bus: 07 index 3 mmio: [0, 0]
[ 2.455491] bus: 08 index 0 mmio: [0, 0]
[ 2.455494] bus: 08 index 1 mmio: [f4400000, f44fffff]
[ 2.455496] bus: 08 index 2 mmio: [0, 0]
[ 2.455498] bus: 08 index 3 io port: [0, ffff]
[ 2.455500] bus: 08 index 4 mmio: [0, ffffffff]
[ 2.455509] NET: Registered protocol family 2
[ 2.468053] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 2.468309] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 2.468727] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 2.468956] TCP: Hash tables configured (established 131072 bind 65536)
[ 2.468959] TCP reno registered
[ 2.472082] NET: Registered protocol family 1
[ 2.472207] checking if image is initramfs... it is
[ 3.288970] Freeing initrd memory: 9012k freed
[ 3.289384] Simple Boot Flag at 0x36 set to 0x1
[ 3.290243] audit: initializing netlink socket (disabled)
[ 3.290271] type=2000 audit(1237124683.289:1): initialized
[ 3.296660] highmem bounce pool size: 64 pages
[ 3.296666] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 3.299162] VFS: Disk quotas dquot_6.5.1
[ 3.299253] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 3.299365] msgmni has been set to 1762
[ 3.299494] io scheduler noop registered
[ 3.299496] io scheduler anticipatory registered
[ 3.299499] io scheduler deadline registered
[ 3.299512] io scheduler cfq registered (default)
[ 3.299528] pci 0000:00:02.0: Boot video device
[ 3.299806] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 3.299861] pcieport-driver 0000:00:1c.0: found MSI capability
[ 3.299917] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 3.299962] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 3.300004] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 3.300132] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 3.300186] pcieport-driver 0000:00:1c.1: found MSI capability
[ 3.300238] pci_express 0000:00:1c.1:pcie00: allocate port service
[ 3.300283] pci_express 0000:00:1c.1:pcie02: allocate port service
[ 3.300325] pci_express 0000:00:1c.1:pcie03: allocate port service
[ 3.300446] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 3.300499] pcieport-driver 0000:00:1c.4: found MSI capability
[ 3.300552] pci_express 0000:00:1c.4:pcie00: allocate port service
[ 3.300596] pci_express 0000:00:1c.4:pcie02: allocate port service
[ 3.300638] pci_express 0000:00:1c.4:pcie03: allocate port service
[ 3.300758] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 3.300812] pcieport-driver 0000:00:1c.5: found MSI capability
[ 3.300864] pci_express 0000:00:1c.5:pcie00: allocate port service
[ 3.300908] pci_express 0000:00:1c.5:pcie02: allocate port service
[ 3.300950] pci_express 0000:00:1c.5:pcie03: allocate port service
[ 3.301331] isapnp: Scanning for PnP cards...
[ 3.655444] isapnp: No Plug & Play device found
[ 3.690009] hpet_resources: 0xfed00000 is busy
[ 3.690081] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 3.692512] brd: module loaded
[ 3.692587] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 3.692710] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.697371] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.697377] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.701117] mice: PS/2 mouse device common for all mice
[ 3.701251] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 3.701284] rtc0: alarms up to one month, y3k, hpet irqs
[ 3.701410] EISA: Probing bus 0 at eisa.0
[ 3.701418] Cannot allocate resource for EISA slot 1
[ 3.701421] Cannot allocate resource for EISA slot 2
[ 3.701424] Cannot allocate resource for EISA slot 3
[ 3.701449] EISA: Detected 0 cards.
[ 3.701453] cpuidle: using governor ladder
[ 3.701456] cpuidle: using governor menu
[ 3.702005] TCP cubic registered
[ 3.702034] Using IPI No-Shortcut mode
[ 3.702215] registered taskstats version 1
[ 3.702353] Magic number: 1:171:736
[ 3.702471] rtc_cmos 00:07: setting system clock to 2009-03-15 13:44:44 UTC (1237124684)
[ 3.702474] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.702477] EDD information not available.
[ 3.702735] Freeing unused kernel memory: 424k freed
[ 3.702775] Write protecting the kernel text: 2576k
[ 3.702803] Write protecting the kernel read-only data: 936k
[ 3.738356] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 3.763513] compcache: Compressed swap size set to: 256064 KB
[ 3.763860] TLSF: pool: f883a000, init_size=16384, max_size=0, grow_size=16384
[ 3.897075] fuse init (API version 7.9)
[ 3.993521] ACPI: SSDT 3F6D4D39, 01F6 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
[ 3.993954] ACPI: SSDT 3F6D480A, 04AA (r1 PmRef Cpu0Cst 3001 INTL 20050624)
[ 4.145531] Monitor-Mwait will be used to enter C-1 state
[ 4.145534] Monitor-Mwait will be used to enter C-2 state
[ 4.145538] Monitor-Mwait will be used to enter C-3 state
[ 4.165706] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 4.165767] processor ACPI0007:00: registered as cooling_device0
[ 4.165772] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 4.166160] ACPI: SSDT 3F6D4F2F, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
[ 4.166547] ACPI: SSDT 3F6D4CB4, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
[ 4.167754] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 4.167806] processor ACPI0007:01: registered as cooling_device1
[ 4.167811] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 4.170503] Marking TSC unstable due to TSC halts in idle
[ 4.171652] thermal LNXTHERM:01: registered as thermal_zone0
[ 4.173513] ACPI: Thermal Zone [TZ01] (54 C)
[ 4.371355] usbcore: registered new interface driver usbfs
[ 4.371379] usbcore: registered new interface driver hub
[ 4.371440] usbcore: registered new device driver usb
[ 4.374335] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.374351] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 4.374356] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 4.374402] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 4.378317] ehci_hcd 0000:00:1a.7: debug port 1
[ 4.378325] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 4.378338] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf4704000
[ 4.382403] USB Universal Host Controller Interface driver v3.0
[ 4.393027] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.393190] usb usb1: configuration #1 chosen from 1 choice
[ 4.393223] hub 1-0:1.0: USB hub found
[ 4.393231] hub 1-0:1.0: 4 ports detected
[ 4.581110] No dock devices found.
[ 4.597727] SCSI subsystem initialized
[ 4.615394] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.615405] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 4.615410] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 4.615442] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
[ 4.615483] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[ 4.615597] usb usb2: configuration #1 chosen from 1 choice
[ 4.615629] hub 2-0:1.0: USB hub found
[ 4.615638] hub 2-0:1.0: 2 ports detected
[ 4.637261] libata version 3.00 loaded.
[ 4.687767] Adding 256060k swap on /dev/ramzswap0. Priority:100 extents:1 across:256060k
[ 4.724060] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 4.820309] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 4.820321] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 4.820326] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 4.820361] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
[ 4.820402] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 4.820504] usb usb3: configuration #1 chosen from 1 choice
[ 4.820533] hub 3-0:1.0: USB hub found
[ 4.820541] hub 3-0:1.0: 2 ports detected
[ 4.865532] usb 1-2: configuration #1 chosen from 1 choice
[ 4.924496] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 4.924516] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 4.924520] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.924549] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 4.928476] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.928484] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 4.928500] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf4704400
[ 4.944047] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.944187] usb usb4: configuration #1 chosen from 1 choice
[ 4.944217] hub 4-0:1.0: USB hub found
[ 4.944225] hub 4-0:1.0: 6 ports detected
[ 5.152369] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 5.152379] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5.152384] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 5.152411] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 5.152444] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[ 5.152543] usb usb5: configuration #1 chosen from 1 choice
[ 5.152572] hub 5-0:1.0: USB hub found
[ 5.152579] hub 5-0:1.0: 2 ports detected
[ 5.256578] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5.256586] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 5.256590] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.256621] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 5.256658] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[ 5.256751] usb usb6: configuration #1 chosen from 1 choice
[ 5.256779] hub 6-0:1.0: USB hub found
[ 5.256786] hub 6-0:1.0: 2 ports detected
[ 5.464622] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 5.464630] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 5.464634] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.464665] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 5.464695] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[ 5.464790] usb usb7: configuration #1 chosen from 1 choice
[ 5.464822] hub 7-0:1.0: USB hub found
[ 5.464829] hub 7-0:1.0: 2 ports detected
[ 5.500063] Clocksource tsc unstable (delta = -483884524 ns)
[ 5.569919] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.569935] sky2 0000:02:00.0: setting latency timer to 64
[ 5.570022] sky2 0000:02:00.0: v1.22 addr 0xf4300000 irq 16 Yukon-2 EC Ultra rev 3
[ 5.570405] pata_acpi 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 5.570506] pata_acpi 0000:00:1f.1: setting latency timer to 64
[ 5.570558] pata_acpi 0000:00:1f.1: PCI INT A disabled
[ 5.570712] pata_acpi 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5.570764] pata_acpi 0000:00:1f.2: setting latency timer to 64
[ 5.570818] pata_acpi 0000:00:1f.2: PCI INT B disabled
[ 5.571820] sky2 eth0: addr 00:1e:68:10:b2:8a
[ 5.572157] ohci1394 0000:08:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.576031] usb 6-1: new full speed USB device using uhci_hcd and address 2
[ 5.624868] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[f4400000-f44007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 5.650413] ata_piix 0000:00:1f.1: version 2.12
[ 5.650429] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 5.650484] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 5.651865] scsi0 : ata_piix
[ 5.651978] scsi1 : ata_piix
[ 5.652744] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 5.652748] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 5.729848] usb 6-1: configuration #1 chosen from 1 choice
[ 5.758343] usbcore: registered new interface driver hiddev
[ 5.761806] input: C-Media USB Headphone Set as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.3/input/input2
[ 5.762040] input,hidraw0: USB HID v1.00 Device [C-Media USB Headphone Set ] on usb-0000:00:1d.1-1
[ 5.762060] usbcore: registered new interface driver usbhid
[ 5.762064] usbhid: v2.6:USB HID core driver
[ 5.816496] ata1.00: ATAPI: Optiarc DVD RW AD-7530B, NX02, max UDMA/33
[ 5.832429] ata1.00: configured for UDMA/33
[ 6.000717] scsi 0:0:0:0: CD-ROM Optiarc DVD RW AD-7530B NX02 PQ: 0 ANSI: 5
[ 6.000815] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 6.000821] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 6.156097] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 6.156210] scsi2 : ata_piix
[ 6.156491] scsi3 : ata_piix
[ 6.157855] ata3: SATA max UDMA/133 cmd 0x1c00 ctl 0x18f4 bmdma 0x18e0 irq 19
[ 6.157863] ata4: SATA max UDMA/133 cmd 0x18f8 ctl 0x18f0 bmdma 0x18e8 irq 19
[ 6.632177] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6.640313] ata3.00: ATA-8: FUJITSU MHY2160BH, 0000000B, max UDMA/100
[ 6.640317] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 6.656313] ata3.00: configured for UDMA/100
[ 6.920351] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001b2400005ed56c]
[ 6.987276] ata4: SATA link down (SStatus 0 SControl 0)
[ 6.987417] scsi 2:0:0:0: Direct-Access ATA FUJITSU MHY2160B 0000 PQ: 0 ANSI: 5
[ 7.002553] scsi 0:0:0:0: Attached scsi generic sg0 type 5
[ 7.002595] scsi 2:0:0:0: Attached scsi generic sg1 type 0
[ 7.020500] Driver 'sr' needs updating - please use bus_type methods
[ 7.025577] Driver 'sd' needs updating - please use bus_type methods
[ 7.034628] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 7.034632] Uniform CD-ROM driver Revision: 3.20
[ 7.034734] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 7.034851] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 7.034873] sd 2:0:0:0: [sda] Write Protect is off
[ 7.034876] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7.034912] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.034988] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 7.035007] sd 2:0:0:0: [sda] Write Protect is off
[ 7.035011] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7.035047] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.035052] sda: sda1 sda2 sda3 sda4
[ 7.123460] sd 2:0:0:0: [sda] Attached SCSI disk
[ 7.388288] PM: Starting manual resume from disk
[ 7.388292] PM: Resume from partition 8:2
[ 7.388294] PM: Checking hibernation image.
[ 7.388628] PM: Resume from disk failed.
[ 7.408869] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 7.408873] EXT3-fs: write access will be enabled during recovery.
[ 8.520355] kjournald starting. Commit interval 5 seconds
[ 8.520371] EXT3-fs: sda1: orphan cleanup on readonly fs
[ 8.520376] ext3_orphan_cleanup: deleting unreferenced inode 850973
[ 8.520420] ext3_orphan_cleanup: deleting unreferenced inode 1095630
[ 8.520435] EXT3-fs: sda1: 2 orphan inodes deleted
[ 8.520437] EXT3-fs: recovery complete.
[ 8.531009] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.353995] udevd version 124 started
[ 14.810654] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 14.849500] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.891750] Linux agpgart interface v0.103
[ 14.924183] iTCO_vendor_support: vendor-support=0
[ 14.931897] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 14.932141] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[ 14.932719] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 14.934920] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 14.971143] ACPI: Power Button (FF) [PWRF]
[ 14.971279] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[ 14.971366] ACPI: Lid Switch [LID0]
[ 14.971531] ACPI: AC Adapter [ADP1] (on-line)
[ 14.971635] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2a/PNP0C0C:00/input/input5
[ 14.996024] ACPI: Power Button (CM) [PWRB]
[ 14.996127] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2a/PNP0C0E:00/input/input6
[ 15.008671] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 15.009218] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[ 15.023959] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 15.030340] ACPI: Battery Slot [BAT1] (battery absent)
[ 15.036031] ACPI: Sleep Button (CM) [SLPB]
[ 15.186343] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 15.186347] ricoh-mmc: Copyright(c) Philip Langdale
[ 15.186386] ricoh-mmc: Ricoh MMC controller found at 0000:08:01.2 [1180:0843] (rev 12)
[ 15.186408] ricoh-mmc: Controller is now disabled.
[ 15.244961] sdhci: Secure Digital Host Controller Interface driver
[ 15.244965] sdhci: Copyright(c) Pierre Ossman
[ 15.287844] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/input/input7
[ 15.304037] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 15.346249] sdhci-pci 0000:08:01.1: SDHCI controller found [1180:0822] (rev 22)
[ 15.346268] sdhci-pci 0000:08:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 15.349325] mmc0: SDHCI controller on PCI [0000:08:01.1] using PIO
[ 15.762678] ath_hal: module license 'Proprietary' taints kernel.
[ 15.764222] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[ 15.827307] wlan: 0.9.4
[ 15.887441] Linux video capture interface: v2.00
[ 15.940221] ath_pci: 0.9.4
[ 15.940283] ath_pci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 15.940300] ath_pci 0000:06:00.0: setting latency timer to 64
[ 16.525254] ath_rate_sample: 1.2 (0.9.4)
[ 16.538779] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 16.564178] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[ 16.564186] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 16.564198] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[ 16.564204] wifi0: mac 10.0 phy 6.1 radio 10.2
[ 16.564209] wifi0: Use hw queue 1 for WME_AC_BE traffic
[ 16.564211] wifi0: Use hw queue 0 for WME_AC_BK traffic
[ 16.564214] wifi0: Use hw queue 2 for WME_AC_VI traffic
[ 16.564216] wifi0: Use hw queue 3 for WME_AC_VO traffic
[ 16.564218] wifi0: Use hw queue 8 for CAB traffic
[ 16.564220] wifi0: Use hw queue 9 for beacons
[ 16.579979] wifi0: Atheros 5424/2424: mem=0xf4200000, irq=16
[ 16.596907] uvcvideo: Found UVC 1.00 device BenQ QEye (064e:a111)
[ 16.607481] input: BenQ QEye as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input9
[ 16.738031] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 16.738068] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 16.798374] usbcore: registered new interface driver uvcvideo
[ 16.798404] USB Video Class driver (v0.1.0)
[ 16.886360] usbcore: registered new interface driver snd-usb-audio
[ 17.004950] Synaptics Touchpad, model: 1, fw: 5.10, id: 0x258eb1, caps: 0xa04713/0x0
[ 17.052560] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
[ 18.394213] lp: driver loaded but no devices found
[ 18.553171] Adding 979956k swap on /dev/sda2. Priority:-1 extents:1 across:979956k
[ 19.092565] EXT3 FS on sda1, internal journal
[ 20.175391] kjournald starting. Commit interval 5 seconds
[ 20.175880] EXT3 FS on sda3, internal journal
[ 20.175889] EXT3-fs: mounted filesystem with ordered data mode.
[ 20.623606] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 22.154150] ACPI: WMI: Mapper loaded
[ 22.902451] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 23.108622] apm: BIOS not found.
[ 23.282844] ppdev: user-space parallel port driver
[ 26.265099] atkbd.c: Unknown key pressed (translated set 2, code 0x60 on isa0060/serio0).
[ 26.265113] atkbd.c: Use 'setkeycodes 60 <keycode>' to make it known.
[ 26.349574] Bluetooth: Core ver 2.13
[ 26.351297] NET: Registered protocol family 31
[ 26.351307] Bluetooth: HCI device and connection manager initialized
[ 26.351313] Bluetooth: HCI socket layer initialized
[ 26.398021] Bluetooth: L2CAP ver 2.11
[ 26.398033] Bluetooth: L2CAP socket layer initialized
[ 26.517852] Bluetooth: RFCOMM socket layer initialized
[ 26.517876] Bluetooth: RFCOMM TTY layer initialized
[ 26.517880] Bluetooth: RFCOMM ver 1.10
[ 30.629359] sky2 eth0: enabling interface
[ 30.633573] [drm] Initialized drm 1.1.0 20060810
[ 30.645785] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 30.645801] pci 0000:00:02.0: setting latency timer to 64
[ 30.649102] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 30.723705] NET: Registered protocol family 17
[ 32.449285] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control rx
[ 50.227380] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 53.349531] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 63.460078] atkbd.c: Unknown key pressed (translated set 2, code 0x60 on isa0060/serio0).
[ 63.460091] atkbd.c: Use 'setkeycodes 60 <keycode>' to make it known.
[ 317.545406] CPU0 attaching NULL sched-domain.
[ 317.545424] CPU1 attaching NULL sched-domain.
[ 317.548154] CPU0 attaching sched-domain:
[ 317.548163] domain 0: span 0-1 level MC
[ 317.548169] groups: 0 1
[ 317.548179] CPU1 attaching sched-domain:
[ 317.548183] domain 0: span 0-1 level MC
[ 317.548188] groups: 1 0
[ 1196.520120] CE: hpet increasing min_delta_ns to 15000 nsec
[ 1999.296155] hub 6-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[ 1999.296173] usb 6-1: USB disconnect, address 2
[ 1999.601083] usb 6-1: new full speed USB device using uhci_hcd and address 3
[ 1999.756205] usb 6-1: configuration #1 chosen from 1 choice
[ 1999.848088] input: C-Media USB Headphone Set as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.3/input/input11
[ 1999.909244] input,hidraw0: USB HID v1.00 Device [C-Media USB Headphone Set ] on usb-0000:00:1d.1-1
[ 2028.276073] usb 5-2: new full speed USB device using uhci_hcd and address 2
[ 2028.436745] usb 5-2: configuration #1 chosen from 1 choice
[ 2028.625978] usbcore: registered new interface driver libusual
[ 2028.647614] Initializing USB Mass Storage driver...
[ 2028.650054] scsi4 : SCSI emulation for USB Mass Storage devices
[ 2028.650246] usbcore: registered new interface driver usb-storage
[ 2028.650255] USB Mass Storage support registered.
[ 2028.650432] usb-storage: device found at 2
[ 2028.650437] usb-storage: waiting for device to settle before scanning
[ 2033.650239] usb-storage: device scan complete
[ 2033.656135] scsi 4:0:0:0: Direct-Access OLYMPUS X450/D535Z/C370Z 1.00 PQ: 0 ANSI: 0 CCS
[ 2033.663072] sd 4:0:0:0: [sdb] 2047808 512-byte hardware sectors (1048 MB)
[ 2033.668121] sd 4:0:0:0: [sdb] Write Protect is off
[ 2033.668130] sd 4:0:0:0: [sdb] Mode Sense: 00 06 00 00
[ 2033.668135] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2033.706206] sd 4:0:0:0: [sdb] 2047808 512-byte hardware sectors (1048 MB)
[ 2033.711060] sd 4:0:0:0: [sdb] Write Protect is off
[ 2033.711073] sd 4:0:0:0: [sdb] Mode Sense: 00 06 00 00
[ 2033.711078] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2033.711089] sdb: sdb1
[ 2033.719384] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 2033.719569] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 2265.400381] usb 5-2: USB disconnect, address 2
[14795.098548] tun: Universal TUN/TAP device driver, 1.6
[14795.098557] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[17887.290330] ekiga[13596]: segfault at 28 ip b73eb528 sp bff4bd00 error 4 in libpt.so.1.10.10[b7152000+335000]
[17901.397458] ekiga[13631]: segfault at 28 ip b736c528 sp bfacf080 error 4 in libpt.so.1.10.10[b70d3000+335000]
[17937.762453] ekiga[13966]: segfault at 28 ip b73a0528 sp bfe033f0 error 4 in libpt.so.1.10.10[b7107000+335000]
[17956.041728] ekiga[14020]: segfault at 28 ip b73a9528 sp bfc0a1c0 error 4 in libpt.so.1.10.10[b7110000+335000]
[18460.190652] ekiga[14211]: segfault at 28 ip b73b1528 sp bf9116b0 error 4 in libpt.so.1.10.10[b7118000+335000]
[19640.209830] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[20658.062871] mmc0: new SD card at address 0002
[20658.381629] mmcblk0: mmc0:0002 MMC 4 1026KiB (ro)
[20658.382990] mmcblk0:<3>mmcblk0: error -110 transferring data
[20658.640045] end_request: I/O error, dev mmcblk0, sector 0
[20658.640055] Buffer I/O error on device mmcblk0, logical block 0
[20658.640066] end_request: I/O error, dev mmcblk0, sector 4
[20658.640071] Buffer I/O error on device mmcblk0, logical block 1
[20658.896503] mmcblk0: error -110 transferring data
[20658.896519] end_request: I/O error, dev mmcblk0, sector 0
[20658.896528] Buffer I/O error on device mmcblk0, logical block 0
[20658.896538] end_request: I/O error, dev mmcblk0, sector 4
[20658.896543] Buffer I/O error on device mmcblk0, logical block 1
[20659.153038] mmcblk0: error -110 transferring data
[20659.153054] end_request: I/O error, dev mmcblk0, sector 0
[20659.153063] Buffer I/O error on device mmcblk0, logical block 0
[20659.153072] end_request: I/O error, dev mmcblk0, sector 4
[20659.153077] Buffer I/O error on device mmcblk0, logical block 1
[20659.409522] mmcblk0: error -110 transferring data
[20659.409538] end_request: I/O error, dev mmcblk0, sector 0
[20659.409547] Buffer I/O error on device mmcblk0, logical block 0
[20659.409556] end_request: I/O error, dev mmcblk0, sector 4
[20659.409561] Buffer I/O error on device mmcblk0, logical block 1
[20659.666009] mmcblk0: error -110 transferring data
[20659.666024] end_request: I/O error, dev mmcblk0, sector 0
[20659.666032] Buffer I/O error on device mmcblk0, logical block 0
[20659.666042] end_request: I/O error, dev mmcblk0, sector 4
[20659.666071] ldm_validate_partition_table(): Disk read failed.
[20659.922503] mmcblk0: error -110 transferring data
[20659.922521] end_request: I/O error, dev mmcblk0, sector 0
[20659.922533] end_request: I/O error, dev mmcblk0, sector 4
[20660.178981] mmcblk0: error -110 transferring data
[20660.178999] end_request: I/O error, dev mmcblk0, sector 0
[20660.179012] end_request: I/O error, dev mmcblk0, sector 4
[20660.435501] mmcblk0: error -110 transferring data
[20660.435519] end_request: I/O error, dev mmcblk0, sector 0
[20660.435532] end_request: I/O error, dev mmcblk0, sector 4
[20660.691981] mmcblk0: error -110 transferring data
[20660.691995] end_request: I/O error, dev mmcblk0, sector 0
[20660.692007] end_request: I/O error, dev mmcblk0, sector 4
[20660.692160] Dev mmcblk0: unable to read RDB block 0
[20660.947120] mmcblk0: error -110 transferring data
[20660.947140] end_request: I/O error, dev mmcblk0, sector 0
[20660.947153] end_request: I/O error, dev mmcblk0, sector 4
[20661.203646] mmcblk0: error -110 transferring data
[20661.203663] end_request: I/O error, dev mmcblk0, sector 0
[20661.203675] end_request: I/O error, dev mmcblk0, sector 4
[20661.460205] mmcblk0: error -110 transferring data
[20661.460219] end_request: I/O error, dev mmcblk0, sector 24
[20661.460230] end_request: I/O error, dev mmcblk0, sector 28
[20661.716658] mmcblk0: error -110 transferring data
[20661.716675] end_request: I/O error, dev mmcblk0, sector 24
[20661.716688] end_request..
-
Hm koukam ze tohle uz se jinde resilo, ale nevyresilo. Mozna chyba v kernelu ?
http://dev.laptop.org/ticket/1802 (http://dev.laptop.org/ticket/1802)
http://ubuntuforums.org/showthread.php?t=403634 (http://ubuntuforums.org/showthread.php?t=403634)
Nasledujico dokaz je zajimavy. Protoze pry by mel kernel co na nem jede interpid tento problem resit. U nas je to zatim naopak. Na hardym slo vse shvele, na interpidu nejde.
http://ubuntuforums.org/showthread.php?t=403634 (http://ubuntuforums.org/showthread.php?t=403634)
A podle tohoto odkazu muzu na podporu xD karet rovnou zapomenout
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/202490 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/202490)
-
caw,mam taky mensi problem s cteckou,nehce mi vzit jednu kartu,kopiroval sem na ni data a sekl se mi notas,ted kdyz tu kartu dam do ctecky tak ji pc nevidi,ale druhej kompl s win jo,ale v nem to nejde na formatovat,nevite co s tim?
-
Tak je dost dobre mozne ze ta SD karta co jsme zatim zkouseli je vadna. To uvidime zitra jestli ji rozpozna zapise na ni nejaky kop s windows. To by vysvetlovalo pro nesla ani ta externi.
Googlil jsem a vypada to, ze tato ctecka ma vubec problem s jinymi kartami nez Sd. Mame totiz jeste xD karty a na ne ta ctecka neregauje vubec. Podivam se zitra co mi vypise dmesg.
Pripadne tady jsou jeste nejake dalsi odkazy :
http://forum.ubuntu.cz/index.php?topic=17761.0 (http://forum.ubuntu.cz/index.php?topic=17761.0)
http://ubuntuforums.org/showthread.php?t=636867 (http://ubuntuforums.org/showthread.php?t=636867)
http://ubuntuforums.org/showthread.php?p=4751191#post4751191 (http://ubuntuforums.org/showthread.php?p=4751191#post4751191)
https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.22/+bug/111089 (https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.22/+bug/111089)
Moc jsem to nepobral, obecne by mely SD karty fungovat MMC nevim a o xD karty se stejnak nikdo moc nestara - vetsina tech prispevku konci tim ze si tazatel koupil externi ctecku.