Fórum Ubuntu CZ/SK

Ostatní => Ubuntu Server => Téma založeno: Hanz02 16 Března 2009, 10:07:30

Název: FTP a Apache
Přispěvatel: Hanz02 16 Března 2009, 10:07:30
Prosim o pomoc :)

Mam Kubuntu 7.10, Vsftpd 2.0.5 a Apache2.2.4

Pokud uzivatel Upload nahraje soubor na FTP je vse v poradku.

Pokud chci, aby soubor sel stahnout i pres web - nainstaloval jsem apache2 a snazil se nastavit :)
Ale pokud necham prava jak jsou nic se nezobrazuje. Pokud rucne nastavim prava na skupinu Pepa soubory i slozky se zobrazuji.
Jak spravne nastavim, aby se prava nastavovala automaticky? Pokousel jsem se podle http://www.tachec.org/howto/vsftpd/virtual_users/ ale moc se nepovedlo :(

Kód: [Vybrat]
-rw-------  1 Upload Upload 25543 2009-03-16 09:53 soubor.srt (Nahrany soubor pres ftp, neni videt pres web)
drwxrwx---  2 Upload Upload  4096 2009-03-15 19:18 Slozka1 (Nahrany adresar pres ftp, neni videt pres web)
drwxrwxr-x  2 Upload pepa    4096 2009-03-15 14:38 Slozka2 (Upravena prava, adresar je videt pres web)


/etc/vsftpd.conf
Kód: [Vybrat]
# Example config file /etc/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
#
# Run standalone?  vsftpd can run either from an inetd or as a standalone
# daemon started from an initscript.

listen=YES

#
# Run standalone with IPv6?
# Like the listen parameter, except vsftpd will listen on an IPv6 socket
# instead of an IPv4 one. This parameter and the listen parameter are mutually
# exclusive.
#listen_ipv6=YES
#
# Allow anonymous FTP? (Beware - allowed by default if you comment this out).
#anonymous_enable=YES
#
# Uncomment this to allow local users to log in.

local_enable=YES

# Uncomment this to enable any form of FTP write command.

write_enable=YES


# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=077

chmod_enable=YES
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
#anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.

dirmessage_enable=YES

#
# Activate logging of uploads/downloads.
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).

connect_from_port_20=YES

# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
# You may override where the log file goes if you like. The default is shown
# below.

xferlog_file=/var/log/vsftpd.log

#If you want, you can have your log file in standard ftpd xferlog format
#xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
#idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
#data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that on some FTP servers, ASCII support allows a denial of service
# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
# predicted this attack and has always been safe, reporting the size of the
# raw file.
# ASCII mangling is a horrible feature of the protocol.
#ascii_upload_enable=YES
#ascii_download_enable=YES
#
# You may fully customise the login banner string:

ftpd_banner=Vitej v Kubuntaku

# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd.banned_emails


#PRIDANO

guest_enable=YES
guest_username=Upload[/color]

# You may restrict local users to their home directories.  See the FAQ for
# the possible risks in this before using chroot_local_user or
# chroot_list_enable below.

chroot_local_user=YES

# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().

chroot_list_enable=YES

# (default follows)

chroot_list_file=/etc/vsftpd.chroot_list

# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES
#
#
# Debian customization
#
# Some of vsftpd's settings don't fit the Debian filesystem layout by
# default.  These settings are more Debian-friendly.
#
# This option should be the name of a directory which is empty.  Also, the
# directory should not be writable by the ftp user. This directory is used
# as a secure chroot() jail at times vsftpd does not require filesystem
# access.

secure_chroot_dir=/var/run/vsftpd

# This string is the name of the PAM service vsftpd will use.

#PRIDANO

pam_service_name=vsftpd
local_root=/media/700GB/$USER
user_sub_token=$USER
write_enable=YES
anod_upload_enable=YES
anon_umask=0777
anon_mkdir_write_enable=YES

# This option specifies the location of the RSA certificate to use for SSL
# encrypted connections.
#rsa_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem
# This option specifies the location of the RSA key to use for SSL
# encrypted connections.
#rsa_private_key_file=/etc/ssl/private/ssl-cert-snakeoil.key

#tcp_wrappers=YES
pasv_min_port=17021
pasv_max_port=17666

/etc/pam.d/vsftpd
Kód: [Vybrat]
# Standard behaviour for ftpd(8).
auth required pam_listfile.so item=user sense=deny file=/etc/ftpusers onerr=succeed

# Note: vsftpd handles anonymous logins on its own.  Do not enable
# pam_ftp.so.

# Standard blurb.
@include common-account
@include common-session

@include common-auth
auth required pam_shells.so

Diky za pomoc...
Název: Re: FTP a Apache
Přispěvatel: c0rrupt 16 Července 2010, 13:02:57
Mám asi stejný problém nikdo neví? Prostě soubory co vytvořím pomocí vsftpd nejdou vidět následně přes web. Musím ručně nastavovat chmod . Jediné co jsem našel v vsftpd.conf je ta umask ale at tam dám 022 nebo 077 pořád nic. Nějak v těch oprávněních pořád plavu u Samby už jsem to vcelku pochopil ale tohle nevim.
Název: Re: FTP a Apache
Přispěvatel: DrSilenec 17 Července 2010, 03:10:54
Tak pokud se nepletu práva by měla být 744 aby mohla být stažitelná přes apache... protože, apache je jiný uživatel v linuxu než vsftp... takže umask by měla být 744, jen pro upřesnění: xyz -> x- read, y - write, z - run.... a ke stažení potřebuje mít apache ve funkci read práva k tomu souboru ;-) alespoň tak jsem to pochopil... kdybych Váš problém pochopil špatně stačí odepsat :-)
Název: Re: FTP a Apache
Přispěvatel: c0rrupt 17 Července 2010, 14:20:38
Mě nejde ani tak o ten apache ale spíš o to vsftpd vytvořené nebo upravené soubory přes vsftpd měli právo jenom vlastník a to byl ten přes kterého jsem se připojoval na vsftpd. Ted už jsem to trošku upravil, že je tam oprávnění rw pro všechny v configu vsftpd.conf, to jsem předtím uplně nechápal. Nastavil jsem si tam umask mylim na 001, né zcela to chápu ale ted je to použitelné. Ale i tak já jsem chtěl docílit toho aby to dělalo to co třebas samba, že ty soubory budou mít uplně plnej přístup pro všechny nobody, nogroup drwx. A to asi nepude.
Takže prakticky jsem ten problém vyřešil, tak aby to bylo použitelné ale né tak jak bych si to uplně představoval. A tomu oprávnění pořád scela nerozumím. Sice chápu co ty čísla znamenají a chápu rwx atd ale když něco chci prostě nevim jaký číslo tam mam dát. Ktomu v některých konfigách jako tu je tří místné číslo v chomodu čtyřmístné. Prostě v tom plavu :) zas mi chybí základy.