Fórum Ubuntu CZ/SK
Ubuntu pro osobní počítače => Hardware => Téma založeno: mardon 28 Dubna 2009, 20:50:51
-
Neadří se mi zprovoznit tuto kartu pod Kubuntu 9.04 ve Vistach ne stejnem PC funguje bez problemu. Poradte mi prosim jak na to. Uz si s tim hraju delsi dobu a stale TV nejde.
lspci
05:00.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
Subsystem: LeadTek Research Inc. Device 6611
Flags: bus master, medium devsel, latency 64, IRQ 16
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel driver in use: cx8800
Kernel modules: cx8800
vypis z kdetv pustene z konsole
kbuildsycoca running...
Creating vbi proxy client, rev.
$Id: proxy-client.c,v 1.18 2008/02/19 00:35:21 mschimek Exp $
proxy_msg: connect: error 2, No such file or directory
Try to open V4L2 0.20 VBI device, libzvbi interface rev.
$Id: io-v4l2.c,v 1.37 2008/02/19 00:35:20 mschimek Exp $
Opened /dev/vbi0
libzvbi:io-v4l2k:vbi_capture_v4l2k_new: Try to open V4L2 2.6 VBI device, libzvbi interface rev.
$Id: io-v4l2k.c,v 1.49 2008/02/19 00:35:20 mschimek Exp $.
libzvbi:io-v4l2k:vbi_capture_v4l2k_new: Opened /dev/vbi0.
libzvbi:io-v4l2k:vbi_capture_v4l2k_new: /dev/vbi0 (Leadtek Winfast 2000XP Expert) is a v4l2 vbi device,
driver cx8800, version 0x00000006.
libzvbi:io-v4l2k:vbi_capture_v4l2k_new: Using streaming interface.
libzvbi:io-v4l2k:v4l2_get_videostd: Current scanning system is 525.
libzvbi:io-v4l2k:v4l2_update_services: Querying current vbi parameters...
libzvbi:io-v4l2k:v4l2_update_services: ...success.
libzvbi:print_vfmt: VBI capture parameters supported:
libzvbi:print_vfmt: VBI capture parameters granted:
libzvbi:raw_decoder:vbi3_raw_decoder_add_services: No services to add.
libzvbi:io-v4l2k:v4l2_update_services: Nyquist check passed.
libzvbi:io-v4l2k:v4l2_update_services: Request decoding of services 0x60000c7f, strict level -1.
libzvbi:sampling_par:_vbi_sampling_par_permit_service: Service 0x00000001 (Teletext System B 625 Level 1.5) requires videostd_set 0x1, have 0x0.
libzvbi:sampling_par:_vbi_sampling_par_permit_service: Service 0x00000003 (Teletext System B, 625) requires videostd_set 0x1, have 0x0.
libzvbi:sampling_par:_vbi_sampling_par_permit_service: Service 0x00000001 (Teletext System B 625 Level 1.5) requires videostd_set 0x1, have 0x0.
libzvbi:sampling_par:_vbi_sampling_par_permit_service: Service 0x00000003 (Teletext System B, 625) requires videostd_set 0x1, have 0x0.
libzvbi:sampling_par:_vbi_sampling_par_permit_service: Service 0x00000004 (Video Program System) requires videostd_set 0x1, have 0x0.
libzvbi:sampling_par:_vbi_sampling_par_permit_service: Service 0x00000400 (Wide Screen Signalling 625) requires videostd_set 0x1, have 0x0.
libzvbi:sampling_par:_vbi_sampling_par_permit_service: Service 0x00000008 (Closed Caption 625, field 1) requires videostd_set 0x1, have0x0.
libzvbi:sampling_par:_vbi_sampling_par_permit_service: Service 0x00000010 (Closed Caption 625, field 2) requires videostd_set 0x1, have0x0.
libzvbi:io-v4l2k:v4l2_update_services: Will capture services 0x00000060, added 0x60 commit=1.
libzvbi:io-v4l2k:v4l2_stream_alloc: Requesting 16 streaming i/o buffers.
libzvbi:io-v4l2k:v4l2_stream_alloc: Mapping 16 streaming i/o buffers.
libzvbi:io-v4l2k:vbi_capture_v4l2k_new: Successfully opened /dev/vbi0 (Leadtek Winfast 2000XP Expert).
libzvbi:io-v4l2k:v4l2_stream_stop: Suspending stream
-
sudo aptitude install tvtime
-
ten mám naistalovaný
-
glxinfo | grep direct
hod to do konzoly a posli vypis....aku mas grafiku?
-
direct rendering: Yes
grafiku mám ATI Radeon 4870
-
tvtime ti nezdetekuje kartu, alebo ho ani nespustis?
-
spustim ale nemam v nem zadne programy z TV
-
a aj si nejake skusal hladat? mas spravnu normu?
-
tak zkousela jsem v kdetv v tvtime asi nevim jak spravne na to, normy jsem prepinala a stale nic
-
A co vypíše
xvinfo
?
-
Myslím, že je to ted problem všech analogových televizních karet, staré kdetv z kde3 určitě nejde, ale zustalo v repozitářích (nevím proč), už se pracuje na portování na kde4, je to v playgroundu nebo existuje druhá náhrada, která se jmenuje (bude jmenovat) LinTv.
Pokud bys toto chtěla, musela bys to zkompilovat z svn, balíky zatím neexistují.
http://websvn.kde.org/trunk/playground/multimedia/lintv/ (http://websvn.kde.org/trunk/playground/multimedia/lintv/)
http://websvn.kde.org/trunk/playground/multimedia/kdetv/ (http://websvn.kde.org/trunk/playground/multimedia/kdetv/)
Potom je gnome náhrada ta se jmenuje TvTime a ještě znám xawtv, které by ti mohlo fungovat i v tomto mezičase, mně ted jako jediné funguje občas:-)
Nevím, nikde se nemohu dočíst v čem je konkrétní problém, ale myslím, že nějak nefunguje v4l.
Jestli někdo ví, napište.
-
xvinfo mi vypíše
X-Video Extension version 2.2
screen #0
Adaptor #0: "ATI Radeon AVIVO Video"
number of ports: 4
port base: 131
operations supported: PutImage
supported visuals:
depth 24, visualID 0x23
depth 24, visualID 0x24
depth 24, visualID 0x25
depth 24, visualID 0x26
depth 24, visualID 0x27
depth 24, visualID 0x28
depth 24, visualID 0x29
depth 24, visualID 0x2a
depth 24, visualID 0x2b
depth 24, visualID 0x2c
depth 24, visualID 0x2d
depth 24, visualID 0x2e
depth 24, visualID 0x2f
depth 24, visualID 0x30
depth 24, visualID 0x31
depth 24, visualID 0x32
depth 24, visualID 0x33
depth 24, visualID 0x34
depth 24, visualID 0x35
depth 24, visualID 0x36
depth 24, visualID 0x37
depth 24, visualID 0x38
depth 24, visualID 0x39
depth 24, visualID 0x3a
depth 24, visualID 0x3b
depth 24, visualID 0x3c
depth 24, visualID 0x3d
depth 24, visualID 0x3e
depth 24, visualID 0x3f
depth 24, visualID 0x40
depth 24, visualID 0x41
depth 24, visualID 0x42
depth 24, visualID 0x43
depth 24, visualID 0x44
depth 24, visualID 0x45
depth 24, visualID 0x46
depth 24, visualID 0x47
depth 24, visualID 0x48
depth 24, visualID 0x49
depth 24, visualID 0x4a
depth 24, visualID 0x4b
depth 24, visualID 0x4c
depth 24, visualID 0x4d
depth 24, visualID 0x4e
depth 24, visualID 0x4f
depth 24, visualID 0x50
depth 24, visualID 0x51
depth 24, visualID 0x52
depth 24, visualID 0x53
depth 24, visualID 0x54
depth 24, visualID 0x55
depth 24, visualID 0x56
depth 24, visualID 0x57
depth 24, visualID 0x58
depth 24, visualID 0x59
depth 24, visualID 0x5a
depth 24, visualID 0x5b
depth 24, visualID 0x5c
depth 24, visualID 0x5d
depth 24, visualID 0x5e
depth 24, visualID 0x5f
depth 24, visualID 0x60
depth 24, visualID 0x61
depth 24, visualID 0x62
depth 24, visualID 0x63
depth 24, visualID 0x64
depth 24, visualID 0x65
depth 24, visualID 0x66
depth 24, visualID 0x67
depth 24, visualID 0x68
depth 24, visualID 0x69
depth 24, visualID 0x6a
depth 24, visualID 0x6b
depth 24, visualID 0x6c
depth 24, visualID 0x6d
depth 24, visualID 0x6e
depth 24, visualID 0x6f
depth 24, visualID 0x70
depth 24, visualID 0x71
depth 24, visualID 0x72
number of attributes: 10
"XV_SET_DEFAULTS" (range 0 to 1)
client settable attribute
"XV_DOUBLE_BUFFER" (range 0 to 1)
client settable attribute
client gettable attribute (current value is 1)
"XV_BRIGHTNESS" (range -1000 to 1000)
client settable attribute
client gettable attribute (current value is 0)
"XV_CONTRAST" (range -1000 to 1000)
client settable attribute
client gettable attribute (current value is 0)
"XV_SATURATION" (range -1000 to 1000)
client settable attribute
client gettable attribute (current value is 0)
"XV_COLOR" (range -1000 to 1000)
client settable attribute
client gettable attribute (current value is 0)
"XV_HUE" (range -1000 to 1000)
client settable attribute
client gettable attribute (current value is 0)
"XV_RED_INTENSITY" (range -1000 to 1000)
client settable attribute
client gettable attribute (current value is 0)
"XV_GREEN_INTENSITY" (range -1000 to 1000)
client settable attribute
client gettable attribute (current value is 0)
"XV_BLUE_INTENSITY" (range -1000 to 1000)
client settable attribute
client gettable attribute (current value is 0)
maximum XvImage size: 4096 x 4096
Number of image formats: 4
id: 0x32315659 (YV12)
guid: 59563132-0000-0010-8000-00aa00389b71
bits per pixel: 12
number of planes: 3
type: YUV (planar)
id: 0x30323449 (I420)
guid: 49343230-0000-0010-8000-00aa00389b71
bits per pixel: 12
number of planes: 3
type: YUV (planar)
id: 0x32595559 (YUY2)
guid: 59555932-0000-0010-8000-00aa00389b71
bits per pixel: 16
number of planes: 1
type: YUV (packed)
id: 0x59565955 (UYVY)
guid: 55595659-0000-0010-8000-00aa00389b71
bits per pixel: 16
number of planes: 1
type: YUV (packed)
-
a co
dmesg | grep cx88
?
-
výpis dmesg
[ 10.655675] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
[ 10.655705] cx8800 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.656090] cx88[0]: subsystem: 107d:6611, board: Leadtek Winfast 2000XP Expert [card=5,autodetected], frontend(s): 0
[ 10.656092] cx88[0]: TV tuner type 44, Radio tuner type -1
[ 10.818483] tuner' 0-0043: chip found @ 0x86 (cx88[0])
[ 10.830649] tuner' 0-0060: chip found @ 0xc0 (cx88[0])
[ 10.878471] cx88[0]: Leadtek Winfast 2000XP Expert config: tuner=38, eeprom[0]=0x01
[ 10.889806] input: cx88 IR (Leadtek Winfast 2000XP as /devices/pci0000:00/0000:00:1e.0/0000:05:00.0/input/input5
[ 10.892657] cx88[0]/0: found at 0000:05:00.0, rev: 5, irq: 16, latency: 64, mmio: 0xfd000000
[ 10.892709] cx88[0]/0: registered device video0 [v4l2]
[ 10.892739] cx88[0]/0: registered device vbi0
[ 10.892769] cx88[0]/0: registered device radio0
zkoušela jsem pustit i xawtv . ale obrazovka zčerná a dál již nic
-
tak v tvtime se mi podařilo již naladit kanály, ovšem jsou bez zvuku
někde jsem vyčetla, že mám v alsamixeru zapnout capture pro AUX, ale nevím jak na to?
v capture tam žádný AUX nevidím
-
staci si nastavit analog source: AUX, potom dvihnut hlasitost...a a este je tam output nejaky, ale z hlavy si nepamatam...som na NB teraz..ked budem doma, pozriem presne...tvtime je asi naj na tuto kartu...este sa pohraj s nastaveniami...a obraz bude porovnatelny s XP...
-
nastavit analog source prosim jak?
prosim i jak doladit ten obraz, zatim se je obraz ve windows mnohem hezci
-
vpravo hore mas taku ikonku na zvuk :) kliknes na to pravym tlacitkom, zvolis ovladanie hlasitosti, otvori sa tii pekne okienko na onladanie zvuku :) v tom ovladani hore mas edit, kliknes na to, zvolis si tam aux, analog sources, captures feedback - tym si pridas tie posuvniky na onladanie :) potom sa tam preklikas a analog sources si zvolis na aux...a zvuk by si mala ovladat cez aux a capture feedback... ak to mas po lovensky, tak aux je aux, analog sources - analogovy vstup...
Aby si mala lepsi obraz v tvtime musis o dost ubrat contrast a farby, a pridat brightness, aby nebo lobraz tak vypaleny...dalej vo video processing si zvol attempted framerate na 25, nie na 50...
-
vpravo hore mas taku ikonku na zvuk :) kliknes na to pravym tlacitkom, zvolis ovladanie hlasitosti, otvori sa tii pekne okienko na onladanie zvuku :) v tom ovladani hore mas edit, kliknes na to, zvolis si tam aux, analog sources, captures feedback - tym si pridas tie posuvniky na onladanie :) potom sa tam preklikas a analog sources si zvolis na aux...a zvuk by si mala ovladat cez aux a capture feedback... ak to mas po lovensky, tak aux je aux, analog sources - analogovy vstup...
Aby si mala lepsi obraz v tvtime musis o dost ubrat contrast a farby, a pridat brightness, aby nebo lobraz tak vypaleny...dalej vo video processing si zvol attempted framerate na 25, nie na 50...
vpravo nahore myslis kde?
v tvtime, na plose v kde, v alsamixeru?
-
Prosím poradí mi ještě někdo jak na ten zvuk?
-
tak nějakým laborováním jsem dospěla do stavu, kdy mám alespoň šum
edit: pod rootem mám již dokonce i zvuk (koněčně), teď bych ještě potřebovala vyladit ten obraz, kvality pod WXP zatím nedosahuje (doufám , že se to dá poladit, s tím by se děti asi nesmířily)
-
Ahoj,
mě nejvíc pomohla ruční editatace $HOME/.tvtime/stationlist.xml, kam jsem doplnil frekvence zjištěné z Windows. Hezký návod http://www.linuxexpres.cz/praxe/tvtime-televize-pro-linux-1?highlightWords=tvtime. Se zvukem momentálně neporadím, vždy mi fungoval ihned. Jen jsem ho nebyl schopen nacpat do všech 5.1 repráků....
-
Máte uživatele ve skupině AUDIO? Pouštět TV pod rootem je dost nešťastné.
-
je potrebne mat usera pod audio a taktiez v svojom domovskom adresari najdes skryty adresar .tvtime, tento a jeho 2subory co obsahuje, nastav mu vlastnika z root na daneho uzivatela...
-
je potrebne mat usera pod audio a taktiez v svojom domovskom adresari najdes skryty adresar .tvtime, tento a jeho 2subory co obsahuje, nastav mu vlastnika z root na daneho uzivatela...
ano děkuji, již mi finguje zvuk i obraz i pod uživatelem, teď ještě zbývá vyladit ten obraz
-
A co je s ním za problém?
-
no především nedoashuje vůbec kvality na tomtéž stroji ve WXP, vyblité barvy, větší šum v obraze
-
treba si to vediet nastelovat :P
-
Sakrblé, tomu tedy říkám rada nad zlato!
-
Sakrblé, tomu tedy říkám rada nad zlato!
vpravo hore mas taku ikonku na zvuk :) kliknes na to pravym tlacitkom, zvolis ovladanie hlasitosti, otvori sa tii pekne okienko na onladanie zvuku :) v tom ovladani hore mas edit, kliknes na to, zvolis si tam aux, analog sources, captures feedback - tym si pridas tie posuvniky na onladanie :) potom sa tam preklikas a analog sources si zvolis na aux...a zvuk by si mala ovladat cez aux a capture feedback... ak to mas po lovensky, tak aux je aux, analog sources - analogovy vstup...
Aby si mala lepsi obraz v tvtime musis o dost ubrat contrast a farby, a pridat brightness, aby nebo lobraz tak vypaleny...dalej vo video processing si zvol attempted framerate na 25, nie na 50...
fenquick treba si sem tam aj precitat prispevky predtym :)
-
Děkuji, ale vlákno sleduji od začátku.