Fórum Ubuntu CZ/SK
Ostatní => Archiv => Téma založeno: Andrej Galbavý 25 Září 2006, 16:24:06
-
Caute, neviem preco ale vobec mi nefunguje napalovanie, predtym to normalne islo vsetko tak ako ma. Mam Ubuntu 6.06.1 a pouzivam K3b, ale napalovat mi nefunguje ani v Gnome Baker, vypisuje stale tu istu chybu "OPC failed"
Prikladam aj debug log z K3b:
System
-----------------------
K3b Version: 0.12.17
KDE Version: 3.5.4
QT Version: 3.3.6
Kernel: 2.6.15-27-386
Devices
-----------------------
TEAC CD-540E 1.0A (/dev/hdc, ) at /media/cdrom0 [CD-ROM] [Chyba] [Žiadne]
TEAC CD-W512EB 2.0B (/dev/hde, ) at /media/cdrom1 [CD-R; CD-RW; CD-ROM] [Chyba] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R]
Used versions
-----------------------
cdrecord: 2.1.1a01
cdrecord
-----------------------
/usr/bin/X11/cdrecord: Warning: Running on Linux-2.6.15-27-386
/usr/bin/X11/cdrecord: There are unsettled issues with Linux-2.5 and newer.
/usr/bin/X11/cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
scsidev: '/dev/hde'
devname: '/dev/hde'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Error: Cannot gain SYS_RAWIO capability.Is cdrecord installed SUID root?
: Operation not permitted
/usr/bin/X11/cdrecord: Warning: using inofficial version of libscg (debian-0.8debian2 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').
SCSI buffer size: 64512
Cdrecord-Clone 2.01.01a01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Joerg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
and thus may have bugs that are not present in the original version.
Please send bug reports and support requests to .
The original author should not be bothered with problems of this version.
TOC Type: 1 = CD-ROM
Using libscg version 'debian-0.8debian2'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'TEAC '
Identifikation : 'CD-W512EB '
Revision : '2.0B'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 3462144 = 3381 KB
FIFO size : 4194304 = 4096 KB
Error: Cannot gain SYS_RAWIO capability.Is cdrecord installed SUID root?
: Operation not permitted
Track 01: data 619 MB
Total size: 711 MB (70:31.50) = 317363 sectors
Lout start: 712 MB (70:33/38) = 317363 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 3
Reference speed: 6
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable (CAV) media (1)
ATIP start of lead in: -11745 (97:25/30)
ATIP start of lead out: 359848 (79:59/73)
1T speed low: 4 1T speed high: 10
2T speed low: 4 2T speed high: 0 (reserved val 6)
power mult factor: 1 5
recommended erase/write power: 5
A1 values: 24 1A D8
A2 values: 26 B2 4A
Disk type: Phase change
Manuf. index: 40
Manufacturer: INFODISC Technology Co., Ltd.
Blocks total: 359848 Blocks current: 359848 Blocks remaining: 42485
Starting to write CD/DVD at speed 10 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Performing OPC...
/usr/bin/X11/cdrecord: Success. send opc: scsi sendcmd: no error
CDB: 54 01 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 73 03 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x73 Qual 0x03 (power calibration area error) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 7.990s timeout 200s
/usr/bin/X11/cdrecord: OPC failed.
Writing time: 15.485s
/usr/bin/X11/cdrecord: fifo had 64 puts and 0 gets.
/usr/bin/X11/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
cdrecord command:
-----------------------
/usr/bin/X11/cdrecord.mmap -v gracetime=2 dev=/dev/hde speed=10 -dao driveropts=burnfree -eject -data /downloads/Linux/Distibution/Linux XP 2006 Desktop SR2/linux-xp-desktop-2006-SR2-english.iso
Edit: Este podotykam, ze som aktualizoval K3b a zda sa mi, ze to potom prestalo fungovat, skusal som aj rozne media ....
-
Tohle by ti melo pomoct.
http://forum.ubuntu.cz/viewtopic.php?id=3554
-
Tohle by ti melo pomoct.
http://forum.ubuntu.cz/viewtopic.php?id=3554
Mne uz nepomoze nic, resp. tej napalovacke.... Skusal som napalit nieco aj pod Win 2000 v NERE, ale aj tam vyhadzuje errory .... takze asi hardware is DEAD.
-
Zkus to jeste z Live verze nejake distribuce. Treba Slax, nema ani moc MB. V UbuntuLive to prej nejde. Neb je obsazena mechanika. A zkusil bych prehrat nejnovejsi firmware.
-
Tak som aktualizoval firmware , skusal som nieco napalit v Ubuntu a opat ta ista chyba, tak som nabootoval do Win2000, to iste, NERO takisto vyhadzoval chybu, ....
Uz som myslel, ze TEAC je k.o. ....
Opatovne som nabootoval Ubuntu, spustil K3b, a voila ... funguje to ... tak s tym som sa este nestretol, mozno to je len vydych umierajuceho TEACa ?! Uvidime, kazdopadne velmi zaujimava vec.