Fórum Ubuntu CZ/SK
Ostatní => Archiv => Téma založeno: Adam09 31 Května 2009, 15:16:22
-
Zdravím. Mám ve svém mobilu (HP Ipaq 514) MicroSD kartu kterou jsem si objednal přes internet i s adaptérem. Když ale kartu vytáhnu z mobilu, dám do adaptéru a vložím do slotu na karty, a skusím v Ubuntu spustit, zobrazí se
Nelze připojit umístění Nelze připojit soubor. U WinXP mě to šlapalo celkem vpohodě. Co s tím?
-
co pise dmesg?
-
dmesg
[ 0.426735] pci 0000:00:08.0: reg 18 io port: [0x960-0x967]
[ 0.426738] pci 0000:00:08.0: reg 1c io port: [0xb60-0xb63]
[ 0.426741] pci 0000:00:08.0: reg 20 io port: [0xc000-0xc00f]
[ 0.426744] pci 0000:00:08.0: reg 24 32bit mmio: [0xfe02b000-0xfe02bfff]
[ 0.426769] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfe02a000-0xfe02afff]
[ 0.426772] pci 0000:00:0a.0: reg 14 io port: [0xbc00-0xbc07]
[ 0.426782] pci 0000:00:0a.0: supports D1 D2
[ 0.426784] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.426786] pci 0000:00:0a.0: PME# disabled
[ 0.426803] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.426806] pci 0000:00:0b.0: PME# disabled
[ 0.426824] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.426826] pci 0000:00:0c.0: PME# disabled
[ 0.426844] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.426846] pci 0000:00:0d.0: PME# disabled
[ 0.426864] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.426866] pci 0000:00:0e.0: PME# disabled
[ 0.426947] pci 0000:01:01.0: reg 10 32bit mmio: [0xfdfff000-0xfdfff7ff]
[ 0.426952] pci 0000:01:01.0: reg 14 io port: [0xac00-0xac7f]
[ 0.426971] pci 0000:01:01.0: supports D2
[ 0.426972] pci 0000:01:01.0: PME# supported from D2 D3hot D3cold
[ 0.426975] pci 0000:01:01.0: PME# disabled
[ 0.426999] pci 0000:00:09.0: transparent bridge
[ 0.427002] pci 0000:00:09.0: bridge io port: [0xa000-0xafff]
[ 0.427004] pci 0000:00:09.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff]
[ 0.427103] pci 0000:05:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
[ 0.427109] pci 0000:05:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.427115] pci 0000:05:00.0: reg 1c 64bit mmio: [0xfb000000-0xfbffffff]
[ 0.427119] pci 0000:05:00.0: reg 24 io port: [0x9c00-0x9c7f]
[ 0.427123] pci 0000:05:00.0: reg 30 32bit mmio: [0xfcfe0000-0xfcffffff]
[ 0.427155] pci 0000:00:0e.0: bridge io port: [0x9000-0x9fff]
[ 0.427158] pci 0000:00:0e.0: bridge 32bit mmio: [0xfa000000-0xfcffffff]
[ 0.427161] pci 0000:00:0e.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.427169] bus 00 -> node 0
[ 0.427176] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.427579] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.470863] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.471068] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.471273] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 11 *12 14 15)
[ 0.471475] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.471678] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.471881] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.472091] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.472295] ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.472497] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.472700] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.472903] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.473106] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.473308] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.473521] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.473733] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.473943] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.474166] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.474384] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.474601] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
[ 0.474817] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.474961] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 0.475187] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[ 0.475412] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[ 0.475636] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.475860] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
[ 0.476089] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[ 0.476315] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[ 0.476541] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[ 0.476768] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.477003] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.477238] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 0.477477] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[ 0.477631] ACPI: WMI: Mapper loaded
[ 0.477714] SCSI subsystem initialized
[ 0.477714] libata version 3.00 loaded.
[ 0.477714] usbcore: registered new interface driver usbfs
[ 0.477714] usbcore: registered new interface driver hub
[ 0.477714] usbcore: registered new device driver usb
[ 0.477714] PCI: Using ACPI for IRQ routing
[ 0.488009] Bluetooth: Core ver 2.13
[ 0.488023] NET: Registered protocol family 31
[ 0.488023] Bluetooth: HCI device and connection manager initialized
[ 0.488023] Bluetooth: HCI socket layer initialized
[ 0.488023] NET: Registered protocol family 8
[ 0.488023] NET: Registered protocol family 20
[ 0.488032] NetLabel: Initializing
[ 0.488033] NetLabel: domain hash size = 128
[ 0.488035] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.488050] NetLabel: unlabeled traffic allowed by default
[ 0.488146] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
[ 0.488150] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.492076] AppArmor: AppArmor Filesystem Enabled
[ 0.496012] Switched to high resolution mode on CPU 0
[ 0.496153] Switched to high resolution mode on CPU 1
[ 0.504012] pnp: PnP ACPI init
[ 0.504026] ACPI: bus type pnp registered
[ 0.510000] pnp: PnP ACPI: found 13 devices
[ 0.510002] ACPI: ACPI bus type pnp unregistered
[ 0.510011] system 00:01: ioport range 0x4000-0x407f has been reserved
[ 0.510013] system 00:01: ioport range 0x4080-0x40ff has been reserved
[ 0.510015] system 00:01: ioport range 0x4400-0x447f has been reserved
[ 0.510017] system 00:01: ioport range 0x4480-0x44ff has been reserved
[ 0.510020] system 00:01: ioport range 0x4800-0x487f has been reserved
[ 0.510022] system 00:01: ioport range 0x4880-0x48ff has been reserved
[ 0.510027] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.510029] system 00:02: ioport range 0x800-0x87f has been reserved
[ 0.510031] system 00:02: ioport range 0x290-0x297 has been reserved
[ 0.510038] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.510042] system 00:0c: iomem range 0xcde00-0xcffff has been reserved
[ 0.510045] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.510047] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.510050] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved
[ 0.510052] system 00:0c: iomem range 0xfefff000-0xfefff0ff has been reserved
[ 0.510054] system 00:0c: iomem range 0x3fee0000-0x3fefffff could not be reserved
[ 0.510057] system 00:0c: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.510059] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.510061] system 00:0c: iomem range 0x100000-0x3fedffff could not be reserved
[ 0.510064] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.510066] system 00:0c: iomem range 0xfee00000-0xfeefffff has been reserved
[ 0.510068] system 00:0c: iomem range 0xfefff000-0xfeffffff could not be reserved
[ 0.510071] system 00:0c: iomem range 0xfff80000-0xfff80fff has been reserved
[ 0.510073] system 00:0c: iomem range 0xfff90000-0xfffbffff has been reserved
[ 0.510075] system 00:0c: iomem range 0xfffed000-0xfffeffff has been reserved
[ 0.514752] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01
[ 0.514754] pci 0000:00:09.0: IO window: 0xa000-0xafff
[ 0.514758] pci 0000:00:09.0: MEM window: 0xfdf00000-0xfdffffff
[ 0.514760] pci 0000:00:09.0: PREFETCH window: disabled
[ 0.514763] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02
[ 0.514764] pci 0000:00:0b.0: IO window: disabled
[ 0.514767] pci 0000:00:0b.0: MEM window: disabled
[ 0.514769] pci 0000:00:0b.0: PREFETCH window: disabled
[ 0.514771] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03
[ 0.514773] pci 0000:00:0c.0: IO window: disabled
[ 0.514775] pci 0000:00:0c.0: MEM window: disabled
[ 0.514777] pci 0000:00:0c.0: PREFETCH window: disabled
[ 0.514780] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:04
[ 0.514781] pci 0000:00:0d.0: IO window: disabled
[ 0.514783] pci 0000:00:0d.0: MEM window: disabled
[ 0.514785] pci 0000:00:0d.0: PREFETCH window: disabled
[ 0.514788] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:05
[ 0.514790] pci 0000:00:0e.0: IO window: 0x9000-0x9fff
[ 0.514793] pci 0000:00:0e.0: MEM window: 0xfa000000-0xfcffffff
[ 0.514795] pci 0000:00:0e.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.514803] pci 0000:00:09.0: setting latency timer to 64
[ 0.514807] pci 0000:00:0b.0: setting latency timer to 64
[ 0.514811] pci 0000:00:0c.0: setting latency timer to 64
[ 0.514815] pci 0000:00:0d.0: setting latency timer to 64
[ 0.514819] pci 0000:00:0e.0: setting latency timer to 64
[ 0.514822] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.514824] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
[ 0.514826] bus: 01 index 0 io port: [0xa000-0xafff]
[ 0.514827] bus: 01 index 1 mmio: [0xfdf00000-0xfdffffff]
[ 0.514829] bus: 01 index 2 mmio: [0x0-0x0]
[ 0.514831] bus: 01 index 3 io port: [0x00-0xffff]
[ 0.514832] bus: 01 index 4 mmio: [0x000000-0xffffffffffffffff]
[ 0.514834] bus: 02 index 0 mmio: [0x0-0x0]
[ 0.514836] bus: 02 index 1 mmio: [0x0-0x0]
[ 0.514837] bus: 02 index 2 mmio: [0x0-0x0]
[ 0.514838] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.514840] bus: 03 index 0 mmio: [0x0-0x0]
[ 0.514841] bus: 03 index 1 mmio: [0x0-0x0]
[ 0.514843] bus: 03 index 2 mmio: [0x0-0x0]
[ 0.514844] bus: 03 index 3 mmio: [0x0-0x0]
[ 0.514846] bus: 04 index 0 mmio: [0x0-0x0]
[ 0.514847] bus: 04 index 1 mmio: [0x0-0x0]
[ 0.514849] bus: 04 index 2 mmio: [0x0-0x0]
[ 0.514850] bus: 04 index 3 mmio: [0x0-0x0]
[ 0.514852] bus: 05 index 0 io port: [0x9000-0x9fff]
[ 0.514853] bus: 05 index 1 mmio: [0xfa000000-0xfcffffff]
[ 0.514855] bus: 05 index 2 mmio: [0xd0000000-0xdfffffff]
[ 0.514856] bus: 05 index 3 mmio: [0x0-0x0]
[ 0.514868] NET: Registered protocol family 2
[ 0.548056] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.548370] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.549609] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.550226] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.550229] TCP reno registered
[ 0.560098] NET: Registered protocol family 1
[ 0.560229] checking if image is initramfs... it is
[ 1.091175] Freeing initrd memory: 7767k freed
[ 1.096254] audit: initializing netlink socket (disabled)
[ 1.096271] type=2000 audit(1244099026.096:1): initialized
[ 1.103576] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.104749] VFS: Disk quotas dquot_6.5.1
[ 1.104795] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.105341] fuse init (API version 7.10)
[ 1.105409] msgmni has been set to 1974
[ 1.105595] alg: No test for stdrng (krng)
[ 1.105607] io scheduler noop registered
[ 1.105609] io scheduler anticipatory registered
[ 1.105610] io scheduler deadline registered
[ 1.105648] io scheduler cfq registered (default)
[ 1.105666] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 1.121067] pci 0000:00:0b.0: Enabling HT MSI Mapping
[ 1.121073] pci 0000:00:0b.0: Found enabled HT MSI Mapping
[ 1.121076] pci 0000:00:0b.0: Linking AER extended capability
[ 1.121084] pci 0000:00:0c.0: Enabling HT MSI Mapping
[ 1.121089] pci 0000:00:0c.0: Found enabled HT MSI Mapping
[ 1.121091] pci 0000:00:0c.0: Linking AER extended capability
[ 1.121099] pci 0000:00:0d.0: Enabling HT MSI Mapping
[ 1.121105] pci 0000:00:0d.0: Found enabled HT MSI Mapping
[ 1.121107] pci 0000:00:0d.0: Linking AER extended capability
[ 1.121115] pci 0000:00:0e.0: Enabling HT MSI Mapping
[ 1.121120] pci 0000:00:0e.0: Found enabled HT MSI Mapping
[ 1.121122] pci 0000:00:0e.0: Linking AER extended capability
[ 1.121139] pci 0000:05:00.0: Boot video device
[ 1.127934] pcieport-driver 0000:00:0b.0: setting latency timer to 64
[ 1.127952] pcieport-driver 0000:00:0b.0: found MSI capability
[ 1.127966] pcieport-driver 0000:00:0b.0: irq 2303 for MSI/MSI-X
[ 1.127972] pci_express 0000:00:0b.0:pcie00: allocate port service
[ 1.127984] pci_express 0000:00:0b.0:pcie03: allocate port service
[ 1.128016] pcieport-driver 0000:00:0c.0: setting latency timer to 64
[ 1.128031] pcieport-driver 0000:00:0c.0: found MSI capability
[ 1.128040] pcieport-driver 0000:00:0c.0: irq 2302 for MSI/MSI-X
[ 1.128045] pci_express 0000:00:0c.0:pcie00: allocate port service
[ 1.128056] pci_express 0000:00:0c.0:pcie03: allocate port service
[ 1.128088] pcieport-driver 0000:00:0d.0: setting latency timer to 64
[ 1.128104] pcieport-driver 0000:00:0d.0: found MSI capability
[ 1.128113] pcieport-driver 0000:00:0d.0: irq 2301 for MSI/MSI-X
[ 1.128118] pci_express 0000:00:0d.0:pcie00: allocate port service
[ 1.128128] pci_express 0000:00:0d.0:pcie03: allocate port service
[ 1.128156] pcieport-driver 0000:00:0e.0: setting latency timer to 64
[ 1.128171] pcieport-driver 0000:00:0e.0: found MSI capability
[ 1.128180] pcieport-driver 0000:00:0e.0: irq 2300 for MSI/MSI-X
[ 1.128185] pci_express 0000:00:0e.0:pcie00: allocate port service
[ 1.128195] pci_express 0000:00:0e.0:pcie03: allocate port service
[ 1.128233] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.128241] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.128374] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.128377] ACPI: Power Button (FF) [PWRF]
[ 1.128416] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.128419] ACPI: Power Button (CM) [PWRB]
[ 1.128468] fan PNP0C0B:00: registered as cooling_device0
[ 1.128475] ACPI: Fan [FAN] (on)
[ 1.129012] processor ACPI_CPU:00: registered as cooling_device1
[ 1.129046] processor ACPI_CPU:01: registered as cooling_device2
[ 1.133972] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.134433] ACPI: Thermal Zone [THRM] (40 C)
[ 1.161245] Linux agpgart interface v0.103
[ 1.161255] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.161334] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.161574] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.162230] brd: module loaded
[ 1.162499] loop: module loaded
[ 1.162570] Fixed MDIO Bus: probed
[ 1.162575] PPP generic driver version 2.4.2
[ 1.162631] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.162662] Driver 'sd' needs updating - please use bus_type methods
[ 1.162670] Driver 'sr' needs updating - please use bus_type methods
[ 1.162823] sata_nv 0000:00:07.0: version 3.5
[ 1.163301] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[ 1.163311] sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[ 1.163374] sata_nv 0000:00:07.0: setting latency timer to 64
[ 1.163441] scsi0 : sata_nv
[ 1.163551] scsi1 : sata_nv
[ 1.163726] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd400 irq 23
[ 1.163728] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd408 irq 23
[ 1.884012] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.608011] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.608437] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[ 2.608442] sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
[ 2.608481] sata_nv 0000:00:08.0: setting latency timer to 64
[ 2.608540] scsi2 : sata_nv
[ 2.608608] scsi3 : sata_nv
[ 2.608777] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc000 irq 22
[ 2.608780] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc008 irq 22
[ 3.488016] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.496195] ata3.00: ATA-7: WDC WD2500JS-00NCB1, 10.02E02, max UDMA/133
[ 3.496198] ata3.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 0/32)
[ 3.505185] ata3.00: configured for UDMA/133
[ 4.384015] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.392093] ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-H62N, CL00, max UDMA/100
[ 4.408106] ata4.00: configured for UDMA/100
[ 4.413301] isa bounce pool size: 16 pages
[ 4.413387] scsi 2:0:0:0: Direct-Access ATA WDC WD2500JS-00N 10.0 PQ: 0 ANSI: 5
[ 4.413474] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[ 4.413490] sd 2:0:0:0: [sda] Write Protect is off
[ 4.413492] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.413514] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.413584] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[ 4.413596] sd 2:0:0:0: [sda] Write Protect is off
[ 4.413598] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.413620] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.413623] sda: sda1 sda2 sda3 < sda5 sda6 >
[ 4.443749] sd 2:0:0:0: [sda] Attached SCSI disk
[ 4.443797] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 4.446698] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H62N CL00 PQ: 0 ANSI: 5
[ 4.450383] sr0: scsi3-mmc drive: 16x/16x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.450386] Uniform CD-ROM driver Revision: 3.20
[ 4.450464] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 4.450498] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 4.450575] pata_amd 0000:00:06.0: version 0.3.10
[ 4.450621] pata_amd 0000:00:06.0: setting latency timer to 64
[ 4.450700] scsi4 : pata_amd
[ 4.450765] scsi5 : pata_amd
[ 4.451394] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe800 irq 14
[ 4.451396] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe808 irq 15
[ 4.779129] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.779475] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
[ 4.779484] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21
[ 4.779502] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 4.779505] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 4.779561] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 4.779591] ehci_hcd 0000:00:02.1: debug port 1
[ 4.779594] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 4.779612] ehci_hcd 0000:00:02.1: irq 21, io mem 0xfeb00000
[ 4.788013] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 4.788083] usb usb1: configuration #1 chosen from 1 choice
[ 4.788108] hub 1-0:1.0: USB hub found
[ 4.788117] hub 1-0:1.0: 9 ports detected
[ 4.788220] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.788564] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
[ 4.788571] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20
[ 4.788582] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 4.788584] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 4.788625] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 4.788644] ohci_hcd 0000:00:02.0: irq 20, io mem 0xfe02f000
[ 4.846045] usb usb2: configuration #1 chosen from 1 choice
[ 4.846074] hub 2-0:1.0: USB hub found
[ 4.846081] hub 2-0:1.0: 9 ports detected
[ 4.846157] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.846216] usbcore: registered new interface driver libusual
[ 4.846247] usbcore: registered new interface driver usbserial
[ 4.846256] USB Serial support registered for generic
[ 4.846266] usbcore: registered new interface driver usbserial_generic
[ 4.846268] usbserial: USB Serial Driver core
[ 4.846306] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 4.846308] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 4.846375] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.857038] mice: PS/2 mouse device common for all mice
[ 4.893059] rtc_cmos 00:05: RTC can wake from S4
[ 4.893094] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 4.893118] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 4.893171] device-mapper: uevent: version 1.0.3
[ 4.893250] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 4.893369] device-mapper: multipath: version 1.0.5 loaded
[ 4.893372] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 4.893507] cpuidle: using governor ladder
[ 4.893509] cpuidle: using governor menu
[ 4.893880] TCP cubic registered
[ 4.893943] NET: Registered protocol family 10
[ 4.894280] lo: Disabled Privacy Extensions
[ 4.894523] NET: Registered protocol family 17
[ 4.894542] Bluetooth: L2CAP ver 2.11
[ 4.894543] Bluetooth: L2CAP socket layer initialized
[ 4.894546] Bluetooth: SCO (Voice Link) ver 0.6
[ 4.894547] Bluetooth: SCO socket layer initialized
[ 4.894587] Bluetooth: RFCOMM socket layer initialized
[ 4.894593] Bluetooth: RFCOMM TTY layer initialized
[ 4.894594] Bluetooth: RFCOMM ver 1.10
[ 4.894641] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (2 cpu cores) (version 2.20.00)
[ 4.894705] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0xc
[ 4.894707] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xe
[ 4.894709] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x10
[ 4.894710] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12
[ 4.894864] registered taskstats version 1
[ 4.895006] Magic number: 13:551:65
[ 4.895105] rtc_cmos 00:05: setting system clock to 2009-06-04 07:03:50 UTC (1244099030)
[ 4.895108] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 4.895109] EDD information not available.
[ 4.895151] Freeing unused kernel memory: 536k freed
[ 4.895442] Write protecting the kernel read-only data: 6708k
[ 4.910885] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 5.151154] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 5.151578] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[ 5.151583] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
[ 5.151587] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 5.151634] nv_probe: set workaround bit for reversed mac addr
[ 5.170346] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 5.170361] ohci1394 0000:01:01.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
[ 5.223113] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fdfff000-fdfff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 5.397365] usb 1-8: new high speed USB device using ehci_hcd and address 5
[ 5.533596] usb 1-8: configuration #1 chosen from 1 choice
[ 5.556507] Initializing USB Mass Storage driver...
[ 5.569023] scsi6 : SCSI emulation for USB Mass Storage devices
[ 5.570205] usbcore: registered new interface driver usb-storage
[ 5.570210] USB Mass Storage support registered.
[ 5.570332] usb-storage: device found at 5
[ 5.570334] usb-storage: waiting for device to settle before scanning
[ 5.673783] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x1374 @ 0, addr 00:1b:fc:ac:1a:e9
[ 5.673788] forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3
[ 5.712818] PM: Starting manual resume from disk
[ 5.712822] PM: Resume from partition 8:6
[ 5.712823] PM: Checking hibernation image.
[ 5.712953] PM: Resume from disk failed.
[ 5.733361] kjournald starting. Commit interval 5 seconds
[ 5.733372] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.848669] usb 2-1: new full speed USB device using ohci_hcd and address 2
[ 6.060122] usb 2-1: configuration #1 chosen from 1 choice
[ 6.369022] usb 2-2: new low speed USB device using ohci_hcd and address 3
[ 6.560133] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80001332fb2]
[ 6.602100] usb 2-2: configuration #1 chosen from 1 choice
[ 6.909019] usb 2-7: new full speed USB device using ohci_hcd and address 4
[ 7.119107] usb 2-7: configuration #1 chosen from 1 choice
[ 9.726366] udev: starting version 141
[ 9.857944] usbcore: registered new interface driver hiddev
[ 9.887464] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input4
[ 9.913186] generic-usb 0003:09DA:0080.0001: input,hidraw0: USB HID v1.11 Mouse [A4Tech USB Mouse] on usb-0000:00:02.0-1/input0
[ 9.919444] input: MOSART Semi. Wireless Keyboard & Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input5
[ 9.953201] generic-usb 0003:062A:0102.0002: input,hidraw1: USB HID v1.10 Keyboard [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:02.0-2/input0
[ 9.962825] input: MOSART Semi. Wireless Keyboard & Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.1/input/input6
[ 10.009378] generic-usb 0003:062A:0102.0003: input,hiddev96,hidraw2: USB HID v1.10 Mouse [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:02.0-2/input1
[ 10.009407] usbcore: registered new interface driver usbhid
[ 10.009425] usbhid: v2.6:USB HID core driver
[ 10.054990] parport_pc 00:09: reported by Plug and Play ACPI
[ 10.055058] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 10.136520] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
[ 10.136541] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
[ 10.355798] nvidia: module license 'NVIDIA' taints kernel.
[ 10.402874] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 10.506073] ppdev: user-space parallel port driver
[ 10.569171] usb-storage: device scan complete
[ 10.572129] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 10.575557] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 10.576201] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 10.576779] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 10.578864] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 10.578971] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 10.580708] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 10.580809] sd 6:0:0:1: Attached scsi generic sg3 type 0
[ 10.590161] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[ 10.590266] sd 6:0:0:2: Attached scsi generic sg4 type 0
[ 10.592345] sd 6:0:0:3: [sde] Attached SCSI removable disk
[ 10.592455] sd 6:0:0:3: Attached scsi generic sg5 type 0
[ 10.618660] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 10.618674] nvidia 0000:05:00.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
[ 10.618682] nvidia 0000:05:00.0: setting latency timer to 64
[ 10.619043] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 180.44 Tue Mar 24 05:46:32 PST 2009
[ 11.123552] usbcore: registered new interface driver snd-usb-audio
[ 11.259149] lp0: using parport0 (interrupt-driven).
[ 11.389424] Adding 915664k swap on /dev/sda6. Priority:-1 extents:1 across:915664k
[ 11.946124] EXT3 FS on sda5, internal journal
[ 13.266901] type=1505 audit(1244091838.868:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2171
[ 13.312890] type=1505 audit(1244091838.916:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2175
[ 13.313039] type=1505 audit(1244091838.916:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2175
[ 13.313083] type=1505 audit(1244091838.916:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2175
[ 13.313122] type=1505 audit(1244091838.916:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2175
[ 13.439203] type=1505 audit(1244091839.040:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2180
[ 13.439394] type=1505 audit(1244091839.040:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2180
[ 13.470035] type=1505 audit(1244091839.072:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2184
[ 15.924601] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.924605] Bluetooth: BNEP filters: protocol multicast
[ 15.941849] Bridge firewalling registered
[ 31.784009] eth0: no IPv6 routers present
[ 32.214460] UDF-fs: No VRS found
[ 32.228370] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 32.229630] ISOFS: changing to secondary root
[ 81.000020] Clocksource tsc unstable (delta = -271228286 ns)
[ 202.228048] usb 1-8: reset high speed USB device using ehci_hcd and address 5
-
myslel jsem co vypise po tom co tam tu kartu strcis (vloz ji tam , par vterin pockej a pak ten dmesg) a taky staci poslednich rekneme 50 radku
-
okej tka posilam
2
[25330.661598] usb 1-8: can't restore configuration #1 (error=-71)
[25330.661869] usb 1-8: USB disconnect, address 92
[25330.663698] scsi 91:0:0:1: [sdc] READ CAPACITY failed
[25330.663708] scsi 91:0:0:1: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
[25330.663716] scsi 91:0:0:1: [sdc] Sense not available.
[25330.663730] scsi 91:0:0:1: rejecting I/O to dead device
[25330.663741] scsi 91:0:0:1: [sdc] Write Protect is off
[25330.663745] scsi 91:0:0:1: [sdc] Mode Sense: 00 00 00 00
[25330.663750] scsi 91:0:0:1: [sdc] Assuming drive cache: write through
[25330.663778] scsi 91:0:0:1: rejecting I/O to dead device
[25330.663788] scsi 91:0:0:1: rejecting I/O to dead device
[25330.663798] scsi 91:0:0:1: rejecting I/O to dead device
[25330.663808] scsi 91:0:0:1: rejecting I/O to dead device
[25330.663815] scsi 91:0:0:1: [sdc] READ CAPACITY failed
[25330.663818] scsi 91:0:0:1: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
[25330.663824] scsi 91:0:0:1: [sdc] Sense not available.
[25330.663831] scsi 91:0:0:1: rejecting I/O to dead device
[25330.663838] scsi 91:0:0:1: [sdc] Write Protect is off
[25330.663842] scsi 91:0:0:1: [sdc] Mode Sense: 00 00 00 00
[25330.663845] scsi 91:0:0:1: [sdc] Assuming drive cache: write through
[25330.668554] sd 91:0:0:3: [sde] READ CAPACITY failed
[25330.668564] sd 91:0:0:3: [sde] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
[25330.668572] sd 91:0:0:3: [sde] Sense not available.
[25330.668644] sd 91:0:0:2: [sdd] READ CAPACITY failed
[25330.668648] sd 91:0:0:2: [sdd] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
[25330.668654] sd 91:0:0:2: [sdd] Sense not available.
[25330.670970] sd 91:0:0:2: [sdd] Write Protect is off
[25330.670979] sd 91:0:0:2: [sdd] Mode Sense: 00 00 00 00
[25330.670984] sd 91:0:0:2: [sdd] Assuming drive cache: write through
[25330.671035] sd 91:0:0:3: [sde] Write Protect is off
[25330.671039] sd 91:0:0:3: [sde] Mode Sense: 00 00 00 00
[25330.671042] sd 91:0:0:3: [sde] Assuming drive cache: write through
[25330.671973] sd 91:0:0:2: [sdd] READ CAPACITY failed
[25330.671977] sd 91:0:0:2: [sdd] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
[25330.671984] sd 91:0:0:2: [sdd] Sense not available.
[25330.672056] sd 91:0:0:3: [sde] READ CAPACITY failed
[25330.672059] sd 91:0:0:3: [sde] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
[25330.672065] sd 91:0:0:3: [sde] Sense not available.
[25330.672081] sd 91:0:0:2: [sdd] Write Protect is off
[25330.672085] sd 91:0:0:2: [sdd] Mode Sense: 00 00 00 00
[25330.672089] sd 91:0:0:2: [sdd] Assuming drive cache: write through
[25330.673496] sd 91:0:0:3: [sde] Write Protect is off
[25330.673502] sd 91:0:0:3: [sde] Mode Sense: 00 00 00 00
[25330.673506] sd 91:0:0:3: [sde] Assuming drive cache: write through
[25330.889071] usb 1-8: new high speed USB device using ehci_hcd and address 93
[25331.097651] usb 1-8: configuration #1 chosen from 1 choice
[25331.180460] scsi92 : SCSI emulation for USB Mass Storage devices
[25331.329306] usb-storage: device found at 93
[25331.329312] usb-storage: waiting for device to settle before scanning
[25336.328307] usb-storage: device scan complete
[25336.330766] scsi 92:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[25336.331371] scsi 92:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[25336.331994] scsi 92:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[25336.332493] scsi 92:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[25336.333900] sd 92:0:0:0: [sdb] Attached SCSI removable disk
[25336.334023] sd 92:0:0:0: Attached scsi generic sg2 type 0
[25336.335221] sd 92:0:0:1: [sdc] Attached SCSI removable disk
[25336.335302] sd 92:0:0:1: Attached scsi generic sg3 type 0
[25336.336210] sd 92:0:0:2: [sdd] Attached SCSI removable disk
[25336.336287] sd 92:0:0:2: Attached scsi generic sg4 type 0
[25336.337203] sd 92:0:0:3: [sde] Attached SCSI removable disk
[25336.337270] sd 92:0:0:3: Attached scsi generic sg5 type 0
[25348.509087] usb 1-8: reset high speed USB device using ehci_hcd and address 93
[25361.512443] usb 1-8: reset high speed USB device using ehci_hcd and address 93
[25386.508031] usb 1-8: reset high speed USB device using ehci_hcd and address 93
[25401.876814] usb 1-8: reset high speed USB device using ehci_hcd and address 93
[25402.381623] sd 92:0:0:0: [sdb] 3932160 512-byte hardware sectors: (2.01 GB/1.87 GiB)
[25402.383608] sd 92:0:0:0: [sdb] Write Protect is off
[25402.383614] sd 92:0:0:0: [sdb] Mode Sense: 03 00 00 00
[25402.383618] sd 92:0:0:0: [sdb] Assuming drive cache: write through
[25402.384557] sd 92:0:0:0: [sdb] 3932160 512-byte hardware sectors: (2.01 GB/1.87 GiB)
[25402.386612] sd 92:0:0:0: [sdb] Write Protect is off
[25402.386617] sd 92:0:0:0: [sdb] Mode Sense: 03 00 00 00
[25402.386621] sd 92:0:0:0: [sdb] Assuming drive cache: write through
[25402.386630] sdb:<6>usb 1-8: reset high speed USB device using ehci_hcd and address 93
[25403.125038] usb 1-8: reset high speed USB device using ehci_hcd and address 93
[25403.745563] usb 1-8: reset high speed USB device using ehci_hcd and address 93
[25404.248869] end_request: I/O error, dev sdb, sector 0
[25404.248884] Buffer I/O error on device sdb, logical block 0
[25404.248983] Buffer I/O error on device sdb, logical block 0
[25404.249028] Buffer I/O error on device sdb, logical block 0
[25404.249048] Buffer I/O error on device sdb, logical block 0
[25404.249072] Buffer I/O error on device sdb, logical block 0
[25404.249083] ldm_validate_partition_table(): Disk read failed.
[25404.249096] Buffer I/O error on device sdb, logical block 0
[25404.249112] Buffer I/O error on device sdb, logical block 0
[25404.249128] Buffer I/O error on device sdb, logical block 0
[25404.249143] Buffer I/O error on device sdb, logical block 0
[25404.249153] Dev sdb: unable to read RDB block 0
[25404.249166] Buffer I/O error on device sdb, logical block 0
[25404.249239] unable to read partition table
[25404.258494] sd 92:0:0:0: [sdb] 3932160 512-byte hardware sectors: (2.01 GB/1.87 GiB)
[25404.260602] sd 92:0:0:0: [sdb] Write Protect is off
[25404.260607] sd 92:0:0:0: [sdb] Mode Sense: 03 00 00 00
[25404.260612] sd 92:0:0:0: [sdb] Assuming drive cache: write through
[25404.269090] sd 92:0:0:0: [sdb] 3932160 512-byte hardware sectors: (2.01 GB/1.87 GiB)
[25404.271601] sd 92:0:0:0: [sdb] Write Protect is off
[25404.271606] sd 92:0:0:0: [sdb] Mode Sense: 03 00 00 00
[25404.271611] sd 92:0:0:0: [sdb] Assuming drive cache: write through
[25404.271622] sdb:<6>usb 1-8: reset high speed USB device using ehci_hcd and address 93
[25404.538595] usb 1-8: can't restore configuration #1 (error=-71)
[25404.538655] usb 1-8: USB disconnect, address 93
[25404.538755] sd 92:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[25404.538764] end_request: I/O error, dev sdb, sector 0
[25404.538984] sd 92:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[25404.538990] end_request: I/O error, dev sdb, sector 0
[25404.539166] sd 92:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[25404.539172] end_request: I/O error, dev sdb, sector 0
[25404.539333] sd 92:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[25404.539339] end_request: I/O error, dev sdb, sector 0
[25404.539494] sd 92:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[25404.539500] end_request: I/O error, dev sdb, sector 0
[25404.539518] ldm_validate_partition_table(): Disk read failed.
[25404.539552] sd 92:0:0:2: [sdd] READ CAPACITY failed
[25404.539556] sd 92:0:0:2: [sdd] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[25404.539562] sd 92:0:0:2: [sdd] Sense not available.
[25404.539678] sd 92:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[25404.539684] end_request: I/O error, dev sdb, sector 0
[25404.539730] sd 92:0:0:2: [sdd] Write Protect is off
[25404.539735] sd 92:0:0:2: [sdd] Mode Sense: 00 00 00 00
[25404.539739] sd 92:0:0:2: [sdd] Assuming drive cache: write through
[25404.539860] sd 92:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[25404.539867] end_request: I/O error, dev sdb, sector 0
[25404.540024] sd 92:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[25404.540030] end_request: I/O error, dev sdb, sector 0
[25404.540376] sd 92:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[25404.540382] end_request: I/O error, dev sdb, sector 0
[25404.540401] Dev sdb: unable to read RDB block 0
[25404.541247] sd 92:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[25404.541257] end_request: I/O error, dev sdb, sector 0
[25404.541309] sd 92:0:0:2: [sdd] READ CAPACITY failed
[25404.541313] sd 92:0:0:2: [sdd] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[25404.541322] sd 92:0:0:2: [sdd] Sense not available.
[25404.541432] sd 92:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[25404.541441] end_request: I/O error, dev sdb, sector 0
[25404.541503] sd 92:0:0:2: [sdd] Write Protect is off
[25404.541509] sd 92:0:0:2: [sdd] Mode Sense: 00 00 00 00
[25404.541514] sd 92:0:0:2: [sdd] Assuming drive cache: write through
[25404.574506] scsi 92:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
[25404.574517] end_request: I/O error, dev sdb, sector 24
[25404.574651] unable to read partition table
[25404.700784] usb 1-8: new high speed USB device using ehci_hcd and address 94
[25404.846529] usb 1-8: configuration #1 chosen from 1 choice
[25404.887016] scsi93 : SCSI emulation for USB Mass Storage devices
[25404.913201] usb-storage: device found at 94
[25404.913208] usb-storage: waiting for device to settle before scanning
[25409.917050] usb-storage: device scan complete
[25409.918296] scsi 93:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[25409.919129] scsi 93:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[25409.919754] scsi 93:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[25409.921317] scsi 93:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[25410.286757] sd 93:0:0:0: [sdb] 3932160 512-byte hardware sectors: (2.01 GB/1.87 GiB)
[25410.288637] sd 93:0:0:0: [sdb] Write Protect is off
[25410.288644] sd 93:0:0:0: [sdb] Mode Sense: 03 00 00 00
[25410.288648] sd 93:0:0:0: [sdb] Assuming drive cache: write through
[25410.292780] sd 93:0:0:0: [sdb] 3932160 512-byte hardware sectors: (2.01 GB/1.87 GiB)
[25410.294620] sd 93:0:0:0: [sdb] Write Protect is off
[25410.294624] sd 93:0:0:0: [sdb] Mode Sense: 03 00 00 00
[25410.294629] sd 93:0:0:0: [sdb] Assuming drive cache: write through
[25410.294638] sdb:<6>usb 1-8: reset high speed USB device using ehci_hcd and address 94
[25411.032049] usb 1-8: reset high speed USB device using ehci_hcd and address 94
[25411.652031] usb 1-8: reset high speed USB device using ehci_hcd and address 94
[25412.152868] end_request: I/O error, dev sdb, sector 0
[25412.152880] __ratelimit: 21 callbacks suppressed
[25412.152886] Buffer I/O error on device sdb, logical block 0
[25412.152979] Buffer I/O error on device sdb, logical block 0
[25412.153021] Buffer I/O error on device sdb, logical block 0
[25412.153045] Buffer I/O error on device sdb, logical block 0
[25412.153060] Buffer I/O error on device sdb, logical block 0
[25412.153071] ldm_validate_partition_table(): Disk read failed.
[25412.153084] Buffer I/O error on device sdb, logical block 0
[25412.153100] Buffer I/O error on device sdb, logical block 0
[25412.153115] Buffer I/O error on device sdb, logical block 0
[25412.153131] Buffer I/O error on device sdb, logical block 0
[25412.153142] Dev sdb: unable to read RDB block 0
[25412.153154] Buffer I/O error on device sdb, logical block 0
[25412.153225] unable to read partition table
[25412.157247] sd 93:0:0:0: [sdb] Attached SCSI removable disk
[25412.157386] sd 93:0:0:0: Attached scsi generic sg2 type 0
[25412.162096] sd 93:0:0:1: [sdc] Attached SCSI removable disk
[25412.162222] sd 93:0:0:1: Attached scsi generic sg3 type 0
[25412.164493] sd 93:0:0:2: [sdd] Attached SCSI removable disk
[25412.164620] sd 93:0:0:2: Attached scsi generic sg4 type 0
[25412.199146] sd 93:0:0:3: [sde] Attached SCSI removable disk
[25412.199281] sd 93:0:0:3: Attached scsi generic sg5 type 0
[25412.200493] sd 93:0:0:0: [sdb] 3932160 512-byte hardware sectors: (2.01 GB/1.87 GiB)
[25412.202612] sd 93:0:0:0: [sdb] Write Protect is off
[25412.202618] sd 93:0:0:0: [sdb] Mode Sense: 03 00 00 00
[25412.202622] sd 93:0:0:0: [sdb] Assuming drive cache: write through
[25412.203615] sd 93:0:0:0: [sdb] 3932160 512-byte hardware sectors: (2.01 GB/1.87 GiB)
[25412.232690] sd 93:0:0:0: [sdb] Write Protect is off
[25412.232701] sd 93:0:0:0: [sdb] Mode Sense: 03 00 00 00
[25412.232705] sd 93:0:0:0: [sdb] Assuming drive cache: write through
[25412.232717] sdb:<6>usb 1-8: reset high speed USB device using ehci_hcd and address 94
[25412.974404] usb 1-8: reset high speed USB device using ehci_hcd and address 94
[25413.589091] usb 1-8: reset high speed USB device using ehci_hcd and address 94
[25414.220046] usb 1-8: reset high speed USB device using ehci_hcd and address 94
[25419.353107] usb 1-8: device descriptor read/all, error -110
[25419.465045] usb 1-8: reset high speed USB device using ehci_hcd and address 94
[25419.599876] sd 93:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[25419.599888] end_request: I/O error, dev sdb, sector 0
[25419.599897] __ratelimit: 5 callbacks suppressed
[25419.599903] Buffer I/O error on device sdb, logical block 0
[25420.085114] usb 1-8: reset high speed USB device using ehci_hcd and address 94
[25420.701055] usb 1-8: reset high speed USB device using ehci_hcd and address 94
[25421.330933] usb 1-8: reset high speed USB device using ehci_hcd and address 94
[25421.831864] end_request: I/O error, dev sdb, sector 0
[25421.831877] Buffer I/O error on device sdb, logical block 0
[25421.831981] Buffer I/O error on device sdb, logical block 0
[25421.832036] Buffer I/O error on device sdb, logical block 0
[25421.832052] Buffer I/O error on device sdb, logical block 0
[25421.832063] ldm_validate_partition_table(): Disk read failed.
[25421.832075] Buffer I/O error on device sdb, logical block 0
[25421.832089] Buffer I/O error on device sdb, logical block 0
[25421.832104] Buffer I/O error on device sdb, logical block 0
[25421.832119] Buffer I/O error on device sdb, logical block 0
[25421.832128] Dev sdb: unable to read RDB block 0
[25421.832140] Buffer I/O error on device sdb, logical block 0
[25421.832215] unable to read partition table
[25421.895170] sd 93:0:0:0: [sdb] 3932160 512-byte hardware sectors: (2.01 GB/1.87 GiB)
[25421.908978] sd 93:0:0:0: [sdb] Write Protect is off
[25421.908989] sd 93:0:0:0: [sdb] Mode Sense: 03 00 00 00
[25421.908994] sd 93:0:0:0: [sdb] Assuming drive cache: write through
[25421.910870] sd 93:0:0:0: [sdb] 3932160 512-byte hardware sectors: (2.01 GB/1.87 GiB)
[25421.916072] sd 93:0:0:0: [sdb] Write Protect is off
[25421.916083] sd 93:0:0:0: [sdb] Mode Sense: 03 00 00 00
[25421.916088] sd 93:0:0:0: [sdb] Assuming drive cache: write through
[25421.916101] sdb:<6>usb 1-8: reset high speed USB device using ehci_hcd and address 94
[25422.676035] usb 1-8: reset high speed USB device using ehci_hcd and address 94
[25423.292033] usb 1-8: reset high speed USB device using ehci_hcd and address 94
[25423.795866] end_request: I/O error, dev sdb, sector 0
[25423.796029] ldm_validate_partition_table(): Disk read failed.
[25423.796081] Dev sdb: unable to read RDB block 0
[25423.796158] unable to read partition table
[25423.809131] sd 93:0:0:0: [sdb] 3932160 512-byte hardware sectors: (2.01 GB/1.87 GiB)
[25423.811654] sd 93:0:0:0: [sdb] Write Protect is off
[25423.811663] sd 93:0:0:0: [sdb] Mode Sense: 03 00 00 00
[25423.811668] sd 93:0:0:0: [sdb] Assuming drive cache: write through
[25423.812485] sd 93:0:0:0: [sdb] 3932160 512-byte hardware sectors: (2.01 GB/1.87 GiB)
[25423.814613] sd 93:0:0:0: [sdb] Write Protect is off
[25423.814618] sd 93:0:0:0: [sdb] Mode Sense: 03 00 00 00
[25423.814622] sd 93:0:0:0: [sdb] Assuming drive cache: write through
[25423.814630] sdb:<6>usb 1-8: reset high speed USB device using ehci_hcd and address 94
[25424.086596] usb 1-8: can't restore configuration #1 (error=-71)
[25424.086762] sd 93:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[25424.086772] end_request: I/O error, dev sdb, sector 0
[25424.086840] usb 1-8: USB disconnect, address 94
[25424.088825] scsi 93:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
[25424.088833] end_request: I/O error, dev sdb, sector 0
[25424.088906] scsi 93:0:0:2: rejecting I/O to dead device
[25424.088935] scsi 93:0:0:2: rejecting I/O to dead device
[25424.088946] scsi 93:0:0:2: rejecting I/O to dead device
[25424.088953] scsi 93:0:0:2: [sdd] READ CAPACITY failed
[25424.088957] scsi 93:0:0:2: [sdd] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
[25424.088965] scsi 93:0:0:2: [sdd] Sense not available.
[25424.088976] scsi 93:0:0:2: rejecting I/O to dead device
[25424.088984] scsi 93:0:0:2: [sdd] Write Protect is off
[25424.088988] scsi 93:0:0:2: [sdd] Mode Sense: 00 00 00 00
[25424.088993] scsi 93:0:0:2: [sdd] Assuming drive cache: write through
[25424.089002] scsi 93:0:0:2: rejecting I/O to dead device
[25424.089028] scsi 93:0:0:2: rejecting I/O to dead device
[25424.089038] scsi 93:0:0:2: rejecting I/O to dead device
[25424.089048] scsi 93:0:0:2: rejecting I/O to dead device
[25424.089059] scsi 93:0:0:2: rejecting I/O to dead device
[25424.089065] scsi 93:0:0:2: [sdd] READ CAPACITY failed
[25424.089071] scsi 93:0:0:2: [sdd] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
[25424.089078] scsi 93:0:0:2: [sdd] Sense not available.
[25424.089088] scsi 93:0:0:2: rejecting I/O to dead device
[25424.089096] scsi 93:0:0:2: [sdd] Write Protect is off
[25424.089102] scsi 93:0:0:2: [sdd] Mode Sense: 00 00 00 00
[25424.089107] scsi 93:0:0:2: [sdd] Assuming drive cache: write through
[25424.089154] scsi 93:0:0:2: rejecting I/O to dead device
[25424.089166] scsi 93:0:0:2: rejecting I/O to dead device
[25424.089177] scsi 93:0:0:2: rejecting I/O to dead device
[25424.089189] scsi 93:0:0:2: rejecting I/O to dead device
[25424.089197] scsi 93:0:0:2: [sdd] READ CAPACITY failed
[25424.089201] scsi 93:0:0:2: [sdd] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
[25424.089211] scsi 93:0:0:2: [sdd] Sense not available.
[25424.089220] scsi 93:0:0:2: rejecting I/O to dead device
[25424.089228] scsi 93:0:0:2: [sdd] Write Protect is off
[25424.089233] scsi 93:0:0:2: [sdd] Mode Sense: 00 00 00 00
[25424.089238] scsi 93:0:0:2: [sdd] Assuming drive cache: write through
[25424.089254] scsi 93:0:0:2: rejecting I/O to dead device
[25424.090325] ldm_validate_partition_table(): Disk read failed.
[25424.090366] Dev sdb: unable to read RDB block 0
[25424.090424] unable to read partition table
[25424.251590] usb 1-8: new high speed USB device using ehci_hcd and address 95
[25424.445546] usb 1-8: configuration #1 chosen from 1 choice
[25424.512137] scsi94 : SCSI emulation for USB Mass Storage devices
[25424.512702] usb-storage: device found at 95
[25424.512709] usb-storage: waiting for device to settle before scanning
-
hm, tak to je zahada... ani google nevi...
-
hm :( ani to nedetekuje mobil (HP Ipaq 514) ma to Windows Mobile...je na to nejaka aplikace??
-
hm :( ani to nedetekuje mobil (HP Ipaq 514) ma to Windows Mobile...je na to nejaka aplikace??
na synchronizaci s win mobile je aplikace SynCE , mela by byt v repozitarich (nejsem zrovna v buntu, takze si nejsem uplne jisty), mozna existuje i neco dalsiho