Fórum Ubuntu CZ/SK
Ubuntu pro osobní počítače => Obecná podpora => Téma založeno: MartenP 22 Června 2009, 13:43:45
-
Zdravím!
Dnes jsem provedl upgrade jádra z 2.6.30-9 na 2.6.30-10 a najednou se mi v konzoli zvýšilo rozlišení z 640x480 na 1024x768, což se mi tedy zrovna dvakrát nelíbí. Hrál jsem si chvíli s Grubem, menu.lst a parametrem vga=číslo_rozlišení. Rozlišení se mi vskutku vrátí. Když se chci ale odhlásit z XFCE, Xorg se neukončí hezky a zůstane viset a do konzole se dostanu až s nový startem (nepoužívám přihlašovacího manažera - startx, ani usplash).
Jak bych měl tohle celé vyřešit, abych měl v konzoli původní rozlišení a šlo se mi v pořádku odhlásit z prostředí? Díky za případné odpovědi!
menu.lst:
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
# color cyan/blue white/blue
# Enable USB autosuspend
usbcore.autosuspend=1
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=f004e8c2-2cee-4381-ad0e-3fceafc104ef ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=f004e8c2-2cee-4381-ad0e-3fceafc104ef
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=true
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=true
## ## End Default Options ##
title Ubuntu, kernel 2.6.30-10-generic
uuid f004e8c2-2cee-4381-ad0e-3fceafc104ef
kernel /boot/vmlinuz-2.6.30-10-generic root=UUID=f004e8c2-2cee-4381-ad0e-3fceafc104ef ro quiet nosplash
initrd /boot/initrd.img-2.6.30-10-generic
quiet
title Ubuntu, kernel 2.6.30-10-generic (recovery mode)
uuid f004e8c2-2cee-4381-ad0e-3fceafc104ef
kernel /boot/vmlinuz-2.6.30-10-generic root=UUID=f004e8c2-2cee-4381-ad0e-3fceafc104ef ro single nosplash
initrd /boot/initrd.img-2.6.30-10-generic
### END DEBIAN AUTOMAGIC KERNELS LIST
-
dopln pro prislusny kernel parametr vga=0x? .. dostupne mody si jiste vyguglis
-
dopln pro prislusny kernel parametr vga=0x? .. dostupne mody si jiste vyguglis
nebo ať si je radši zjistí pomocí
# hwinfo --framebuffer
-
# hwinfo --framebuffer
wou .. thx, good to know it ;)
-
dopln pro prislusny kernel parametr vga=0x? .. dostupne mody si jiste vyguglis
Přečti si prosím ještě jednou popis mého problému. Píši tam, že jsem to už zkoušel a že se mi pak špatně odhlašuje z prostředí.
Nechápu, proč se to děje. S 2.6.30-9 se to nestávalo a s 2.6.30-10 ano. Možná to nechce nic nastavovat a jen počkat do další verze kernelu. Možná to ale není bug, ale nová vlastnost.
-
Tak jsem zjistil, že to má nějakou souvislost s KMS. Pořádně ani nevím, co to je, ale je to prý jaderná novinka pro Intel grafiky přinášející nárůst výkonu. No sláva! :(
Zpět se mi to nepodařilo hodit. Kdyby to aspoň šlo hodit na 800x600...
-
No jo, tester těžký chleba má ... ;)
-
To není věc testování, přechodem na 2.6.30 a nejnovější Xorg jsem chtěl odstranit problémy s grafikou v Jauntym (neboť zatím neplánuji přechod na 9.10 a vyšší), což se, myslím, povedlo dokonale. Tento přechod je plně podporován a umožňuje ho jeden speciální repositář.
O tom problému s rozlišením bych řekl (za základě informací z netu), že by to mělo být normální chování nových jader spolu s Intel grafikami, a mělo by to přinést zvýšení výkonu a odstranění známých dlouhodobých problémů. To, že se mi to nelíbí, je asi jen můj problém :D