Fórum Ubuntu CZ/SK
Ostatní => Archiv => Téma založeno: emko1 04 Října 2006, 11:34:21
-
předem se omlouvám za stupidní dotazy, jsem na začátku nové éry
- nevím kam rozbalit ovladače sdílené grafiky Intel-3.4.3006-20051209.i386.tar.gz
- po instalaci Firestarter nevidím na ostatní počítače v síti, a to i když zastavím firewall, před instalací firestarter bylo vše v pořádku
díky za každou pomoc
-
Ovladace rozbalte do libovolneho prazdneho adresare, postup dalsi instalace bude uvedeny v souboru README nebo INSTALL.
Po zastaveni firewallu nejsou zadne pakety filtrovany. Ze se skutecne nic nefiltruje, zjistite ve vypisu souboru /var/log/kern.log. Spise nez Firestarter doporucuji FireHOL. Nema sice graficke rozhrani, ale poskytuje vice moznosti nastaveni.
-
INSTALL tam není a z README jsem svou špatnou angličtinou nic nevyčetl:
README for X11R6.8.1
The X.Org Foundation
17 September 2004
Abstract
X11R6.8.1 is an Open Source version of the X Window System that
supports many UNIX(R) and UNIX-like operating systems (such as
Linux, FreeBSD, NetBSD, OpenBSD and Solaris x86) on Intel and other
platforms. This version is compatible with X11R6.8 and other X
window system implementations which support the X11R6 standard.
1. What is X11R6.8.1?
X11R6.8.1 is the eighth full release in the X11R6 series.
X11R6.8.1 is the current X.Org Foundation release series. The core of
X11R6.8.1 is a modular X server. The 6.8.1 version is a new release that
includes additional hardware support, functional enhancements and bug fixes.
Specific release enhancements can be viewed in the Release Notes.
Most modern PC video hardware is supported in X11R6.8.1, and most PC video
hardware that isn't supported explicitly can be used with the "vesa" driver.
The Release Notes has a table showing the drivers provided with X11R6.8.1,
and links to related documentation.
The X.Org Foundation X releases are produced by the X.Org Foundation. The
X.Org Foundation has been formed as a Delaware corporation organized to oper-
ate as a scientific charity under IRS code 501(c)(3) to chartered to develop
and execute effective strategies which provide world-wide stewardship of the
X Window System technology and standards. Membership in the X.Org Foundation
is free to all participants. Applications for Membership are now being
accepted, and active participants in the further development of the X Window
Technology are invited to complete a membership application
. The X11R6.8.1 code-
base forms the second X window system release since the formation of the
X.org foundataion and includes code from the X Consortium, the Open Group and
the XFree86[tm] project. This release is dedicated to the greater X commu-
nity, developers and users alike.
2. Licensing
X Window System source code is covered by many licenses. All of these
licenses have in common the fact that they do not impose significant condi-
tions on the modification or redistribution or either source code or binaries
beyond requiring one or more of the following:
1. Copyright and/or license notices are left intact.
2. Copyright and/or license notices are reproduced verbatim in documenta-
tion accompanying binary distributions.
3. Attributions are included with documentation accompanying binaries.
Most of these licenses are based on the MIT, X Consortium, or BSD (original
and revised) licenses. All of them are consistent with the Open Source Defi-
nition, and most are consistent with the Free Software Foundation's Free
Software Definition.
Copyright and Licensing information for X, including the reproduction of
copyright and/or license notices and attributions required by some of the
licenses for binary distributions, can be found in the License Document. If
you find any omissions in that document, please contact us with details at
. While the current licenses are all open source licenses,
the X.Org Foundation is attempting, with time, to bring as much as possible
of the code's licenses in the distribution into compliance with the Debian
Free Software Guidelines.
3. Pointers to additional information
The documentation for this release can be found online at the X.Org web site
. Information about binary distributions and the
attendant installation instructions can be found in the Installation Docu-
ment.
The X11 version numbering system (including historical information) can be
found in the Versions Document.
Additional information may be available at the X.Org Foundation Wiki
.
4. The Public Mailing Lists
Current information about the X.Org Foundation public mailing lists is avail-
able on the X.Org mailing list page tion_Join_OpenLists.html> and related desktop technology mailing lists can be
found on Freedesktop.org's mailing list page top.org/mailman/listinfo>.
5. Contributing to the X.Org Foundation's X efforts.
If you have any new work or enhancements/bug fixes for existing work, please
send them to or to our bug tracking system
using the xorg component. This will
ensure that they are included in future releases.
6. How to get X11R6.8.1
X11R6.8.1 can be found from the X.Org Foundation wiki at
, and at mirrors of this server. Information about
obtaining and installing binary distributions of this release can be found in
the Installation Document. Information about obtaining the release in source
form is given below.
The source for version 6.8.1 is split into seven tarballs:
X11R6.8.1-src1.tar.gz
X11R6.8.1-src2.tar.gz
X11R6.8.1-src3.tar.gz
X11R6.8.1-src4.tar.gz
X11R6.8.1-src5.tar.gz
X11R6.8.1-src6.tar.gz
X11R6.8.1-src7.tar.gz
The first three contain everything except the fonts and general X11 documen-
tation. Those three are sufficient for building X11R6.8.1 if you already
have a set of fonts. The fourth and fifth contain the fonts. The sixth con-
tains the source for the general X11 documentation. The seventh contains the
general X11 documentation in hardcopy format.
To format the X11R6.8.1 documentation use the latest version of our doctools
package available from the Xorg CVS repository's "doctools" module.
The X source code for this and all releases/snapshots as well as development
versions can also be accessed via the Freedesktop.org CVS repository. It's
also possible to browse the freedesktop CVS repository
. The CVS tag for this version is
"XORG-6_8_1". The CVS tag for the stable branch for this release is
"XORG-6_8-branch". To check out the latest development version, don't spec-
ify any tag.
7. Reporting Bugs
Bugs should be reported to bug tracking system top.org/> using the xorg compoent. Before reporting bugs, please check the
server log file, which can be found at /var/log/Xorg.0.log on most platforms.
If you can't resolve the problem yourself, send the entire log file with your
bug report but not the operating system core dump. Do not edit the log file
as our developers use it to reproduce and debug your problem. Please attach
it to your bug report.
$Id: README,v 1.1.1.1 2004/12/14 16:13:50 alanh Exp $.
$XdotOrg: $
-
To je readme od Xorg, ne od ovladacu ke grafice. Ovladace pro vasi grafickou kartu nejsou primo v Ubuntu?
-
Balíček jsem našel na CD s ovladači k desce PC, též na stránkách Intelu. Jde o desku s integrovanou grafikou - INTEL 855GME.
zda jsou přímo v Ubuntu nevím?, fakt je že monitor nezobrazuje moc hezky
-
Ohledně Firestarteru, měl jsem stejný problém a vyřešil ho takto:
V souboru /etc/firestarter/inbound/setup jsem našel řádky
# Allow response traffic
$IPT -A INBOUND -p tcp -m state --state ESTABLISHED,RELATED -j ACCEPT
$IPT -A INBOUND -p udp -m state --state ESTABLISHED,RELATED -j ACCEPT
a změnil je na
# Allow response traffic
$IPT -A INBOUND -p tcp -m state --state ESTABLISHED,RELATED -j ACCEPT
$IPT -A INBOUND -p udp -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT
Prostě se přidá NEW pro udp. Nevím jestli je to nejlepší způsob ale funguje. Thread o tom je zde: http://www.ubuntuforums.org/archive/index.php/t-190542.html.
Ohledně monitoru, jaký je problém? Špatná frekvence? Nepoužíval bych ovladač z cédéčka. Ten v Ubuntu by měl být oukej.
-
# Allow response traffic
$IPT -A INBOUND -p tcp -m state --state ESTABLISHED,RELATED -j ACCEPT
$IPT -A INBOUND -p udp -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT
Tohle je ale velmi nerestriktivni nastaveni. Jestli tomu dobre rozumim, povoluje se prichozi spojeni na vsech portech ze vsech adres. NEW navic povoli vsechny broadcast pakety, tim se muze docela zadelat na problemy. Domnivam se, ze ve Firestarteru je blokovani tohoto typu paketu nastaveno umyslne, stejne jako u FireHOLu - viz. http://firehol.sourceforge.net/services.html#samba
I kdyz vam nefunguje prochazeni obsahem site pres menu Places -> Network, pripojeni k jednotlivym serverum bude fungovat spravne, jen je nutne rucne zadat jmeno nebo IP adresu serveru, ke kteremu se chcete pripojit. To je rozhodne bezpecnejsi a doporucovane reseni.
-
Díky Vám za odpovědi, k restarteru - chování prochazeni obsahem site pres menu Places -> Network je velmi podivne, chvíli se mi okolní zobrazují, chvíli zase ne, a to bez ohledu na zapnutý či vypnutý firewall, zkusím firestarter odinstalovat a uvidíme?
Nicméně teď řeším problém s monitorem, Unbuntu jsem nainstaloval s LCD (vypůjčeným) monitorem a v xorb.conf mám nastaveno:
SubSection "Display"
Depth 24
Modes "1280x1024_60.00"
EndSubSection
Dnes jsem monitor vrátil a připojil nový 17" LCD s rozlišením 1280x1024 60Hz a při startu systému obdržím hlášku od monitoru:
ANALOG
OUT OF RANGE
81,3 kHz / 65 Hz
a je tma, poraďte co stím dělat. moc díky
-
Ak mas parametre k monitoru zmen podla nich section "monitor" a v subsection display odstran tych 60 (nechaj iba "1280x1024") a skus ci nabehne.
-
Díky Lukáši za info. Koukal jsem jak to teda v mém /etc/firestarter/inbound vlastně mám. Místo toho co jsem zde napsal jsem tam je řádek který by měl povolit odpovědi na netbios name broadcasts jen v místní síti.
# Allow response to netbios name broadcasts from the local network.
$IPT -A INBOUND -s $NET -p udp -m state --state NEW -j ACCEPT
Další komentář uvítám.
-
Tenhle radek IMHO povoluje vsechny prichozi broadcasty, aby tam bylo omezeni jen na vasi sit, muselo by tam byt jeste -s xxx.xxx.xxx.xxx/yyy.yyy.yyy.yyy kde xxx.xxx.xxx.xxx je prvni adresa ve vasem IP rozsahu a yyy.yyy.yyy.yyy je sitova maska. Ve skutecnosti by k vam zadny broadcast z cizi site nemel dojit, ale uz jsem v lozich videl i horsi pr@s@rny.
Osobne bych byl te rady, pokud to neni naprosto bezvyhradne absolutne smrtelne nutne, tyto pakety nepovolovat.
-
Ak mas parametre k monitoru zmen podla nich section "monitor" a v subsection display odstran tych 60 (nechaj iba "1280x1024") a skus ci nabehne.
V dodaném manuálu je uvedeno pouze:
1280x1024/60Hz
Na cybex.cz je uvedeno:
Horizontální frekvence: 30-83kHz
Vertikální frekvence: 56-75Hz
Doporučené rozlišení: 1280x1024/75Hz analog
xorg.conf jsem změnil na:
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 30-83
VertRefresh 56-75
# 1280x1024 @ 60.00 Hz (GTF) hsync: 63.60 kHz; pclk: 108.88 MHz
Modeline "1280x1024_60.00" 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -HSync +Vsync
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation 82852/855GM Integrated Graphics Device"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024"
EndSubSection
a přesto nový monitor (LG L1760tQ) nenaběhne
-
...přesto nový monitor (LG L1760tQ) nenaběhne
Jaky ovladac ted mate nastaveny v xorg.conf? Zkuste zmenit na vesa.
-
Chápu dobře, že mám změnit "i810" na "vesa" ?
v xorg.conf mám:
Section "Device"
Identifier "Intel Corporation 82852/855GM Integrated Graphics Device"
Driver "i810"
BusID "PCI:0:2:0"
EndSection
-
Tak jsem změnil "i810" na "vesa" a postupně zkusil frekvence 60, 65, 70 Hz - původní monitor bez změn v zobrazování, nový monitor naběhne, ale s cca 1cm posunem vlevo a zobrazení je neostré, dá se říci rozmazané, už fakt nevím co stím..
-
Posun vpravo nebo vlevo je otazka nastaveni monitoru.
Neostre zobrazeni je v pripade chybne nastaveneho rozliseni a/nebo obnovovaciho kmitoctu.
-
Zkus nastavit sekci monitor pouze takto (a ovladač vrať zpátky na i810):
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
EndSection
-
jj - jsem blb, ty tlačítka jsem našel až po prostudování USER GUIDE, monitor ukazuje pěkně - díky
Můžete mi ještě poradit, jak se zbavit toho firestarteru?
-
...jak se zbavit toho firestarteru?
sudo apt-get remove --purge firestarter
-
jakási chybka:
Odinstalování balíku firestarter ...
* Stopping the Firestarter firewall... [ ok ]
Odstraňuji konfigurační soubory balíku firestarter ...
dpkg: chyba při zpracovávání firestarter (--purge):
podproces post-removal script vrátil chybový status 1
Při zpracování nastaly chyby:
firestarter
E: Sub-process /usr/bin/dpkg returned an error code (1)
-
sudo updatedb
locate firestarter
smazte vsechny vypsane soubory
-
OK smazáno, složkami okolní sítě lze procházet.
díky