Fórum Ubuntu CZ/SK
Ostatní => Archiv => Téma založeno: mira_mo 04 Října 2006, 15:36:34
-
Po dokončení istalace a restrtu PC se nespustí grafický režim,naskočí rozpadlý obraz.Do textového režimu lze vstoupit.
Mám grafickou kartu nVidia 6600 GT PCE.Poradí někdo tak to rozběhat?
-
Zmente nastaveni rozliseni v /etc/X11/xorg.conf.
-
ale jak to mám změnit,jsem úplný začátečník a podle tech popisů co jste mi sem dal jako odkazy mi to nejde :-(
-
jdi do textového režimu. napiš
sudo nano -w /etc/X11/xorg.confzadej heslo, otevře se ti ten xorg.conf a tam si najdi (je to až dole) Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSectionzměn si rozlišení tak jak potřebuješ. Asi bude stačit až v tom posledním řádku, to 24 je myslim hloubka barev a to se používá standardně, taky to musíš mít zadaný nahoře v tom DefaultDepth 24.
-
myslím,že to asi nebude rozlišením,bute asi něco kolem ovladačů
-
Skús tam zmeniť v Section "Monitor " poslednú hodnotu pri VertRefresh. Uber z nej zo 10 čísel. Ak je tam napr. 100 tak tam daj 90.
Je to vlastne frekvencia monitora, ak je vysoká, može sa monitor sám vypnúť.
Ak sy myslíš, že je to s drivermi, tak by tam mal byť na začiatok v Section "Device", časti Driver uvedené "nv". S týmto by ti to malo fungovať.
-
nebo sem hoď ten xorg.conf nebo proveď
sudo dpkg-reconfigure xserver-xorg
-
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "cz"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV43 [GeForce 6600 GT]"
Driver "nv"
BusID "PCI:6:0:0"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 28-64
VertRefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV43 [GeForce 6600 GT]"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
-
poradí s tím někdo?
-
neříkej, že ani jedno už uvedené nepomohlo? Zkusil jsi to? Vyzkoušej třeba to dpkg-reconfigure xserver-xorg, v rozlišeních X serveru a pod položkou MEDIUM u monitoru vyber 1024x768 nebo dokonce 800x600 při 60 Hz. Pokud to půjde, do začátku to určitě bude stačit a můžeš zkusit prostudovat nějaké návody pro lepší pochopení, třeba z uvedených odkazů.
-
fakt nejde nic.