Fórum Ubuntu CZ/SK
Ubuntu pro osobní počítače => Hardware => Téma založeno: Gecco 05 Srpna 2009, 18:52:28
-
Zasunul jsem dnes podruhé USB s tím, že budu pokračovat na diplomce a na USB mi zůstal jen Portable Apps a veškeré soubory včetně diplomky nejsou.
Instaloval jsem Nautilus a krátce po té jsem zasunul USB... naprosto jsem z toho mimo a nevím co teď.... soubory nikde. Veškeré změny, které jse, udělal do neděle tohoto týdne jsou pryč.
Věděl by někdo jak je dostat zpět?
Děkuji
-
Ten usb disk ukazuje ze je prazdny alebo chyba miesto ako by bol obsadeny ale len nieje vidiet subory.
Aky je tam suborovy system. Odpojil si ho pred vytiahnutim alebo iba vytiahol.
Viac to popis.
-
Byl tam Portable Apps a normálně jsem ho odpojil. Zálohu mám, ale na Diplomce se mi neuložilo 46 stran, které teď musím psát znovu.
USB se teď chová dost neobvykle. Sice se načte, ukáží se složky, ale nic nejde otevřít. Je škoda 16 GB prostoru. Nedá se na to nic zkopírovat, nic otevřít. Nainstalovat nový Portable..... A při prohlížení vlastností je tam 0 MB. Nic prázdno. K dispoztici je opět 16 GB. Obsazeno bylo jen 3,5 GB.
-
Zkus se podívat na tato vlákna, mohla by Ti pomoct:
https://bugs.launchpad.net/ubuntu/+bug/123167
http://forum.corsair.com/forums/showthread.php?t=61435&page=9
Nebo dodej víc informací:
1. Vysuň zařízení fyzicky z USB zdířky, otevři Terminál (http://wiki.ubuntu.cz/Termin%C3%A1l) a zkopíruj do něj příkazycd /tmp; lsusb > l; dmesg > d; sudo fdisk -l > f(budeš muset zadat jednou heslo)
2. Pak zasuň do USB, chvíli (cca 15 sekund) počkej, a pak znovu vlož příkazylsusb | diff l -; dmesg | diff d -; sudo fdisk -l | diff f -Všechny tyto příkazy zaznamenají do souborů l, d a f seznam usb zařízení (lsusb), log kernelu (dmesg) a seznam oddílů/pamětí (fdisk -l) a porovná je.
Údaje, které to vypíše, zkopíruj sem do fóra.
-
zatím se nic neděje, kromě toho, že se mi opět ukázaly adresářové složky, ale nic nelze otevřít
-
tak tady to je, pokud je to všechno:
gymnazium@Pracovna:/tmp$ lsusb | diff l -; dmesg | diff d -; sudo fdisk -l | diff f -
1,161c1
< [ 0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00
< [ 0.000000] Initializing cgroup subsys cpuset
< [ 0.000000] Initializing cgroup subsys cpu
< [ 0.000000] Linux version 2.6.28-14-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #47-Ubuntu SMP Sat Jul 25 00:28:35 UTC 2009 (Ubuntu 2.6.28-14.47-generic)
< [ 0.000000] KERNEL supported cpus:
< [ 0.000000] Intel GenuineIntel
< [ 0.000000] AMD AuthenticAMD
< [ 0.000000] NSC Geode by NSC
< [ 0.000000] Cyrix CyrixInstead
< [ 0.000000] Centaur CentaurHauls
< [ 0.000000] Transmeta GenuineTMx86
< [ 0.000000] Transmeta TransmetaCPU
< [ 0.000000] UMC UMC UMC UMC
< [ 0.000000] BIOS-provided physical RAM map:
< [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
< [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
< [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
< [ 0.000000] BIOS-e820: 0000000000100000 - 00000000b7b6c000 (usable)
< [ 0.000000] BIOS-e820: 00000000b7b6c000 - 00000000b7bbf000 (reserved)
< [ 0.000000] BIOS-e820: 00000000b7bbf000 - 00000000b7c86000 (usable)
< [ 0.000000] BIOS-e820: 00000000b7c86000 - 00000000b7cbf000 (ACPI NVS)
< [ 0.000000] BIOS-e820: 00000000b7cbf000 - 00000000b7cee000 (usable)
< [ 0.000000] BIOS-e820: 00000000b7cee000 - 00000000b7cff000 (ACPI data)
< [ 0.000000] BIOS-e820: 00000000b7cff000 - 00000000b7d00000 (usable)
< [ 0.000000] BIOS-e820: 00000000b7d00000 - 00000000c0000000 (reserved)
< [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
< [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
< [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
< [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
< [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
< [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
< [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
< [ 0.000000] DMI 2.4 present.
< [ 0.000000] last_pfn = 0xb7d00 max_arch_pfn = 0x100000
< [ 0.000000] Scanning 2 areas for low memory corruption
< [ 0.000000] modified physical RAM map:
< [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
< [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
< [ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable)
< [ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved)
< [ 0.000000] modified: 0000000000010000 - 0000000000092c00 (usable)
< [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
< [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
< [ 0.000000] modified: 0000000000100000 - 00000000b7b6c000 (usable)
< [ 0.000000] modified: 00000000b7b6c000 - 00000000b7bbf000 (reserved)
< [ 0.000000] modified: 00000000b7bbf000 - 00000000b7c86000 (usable)
< [ 0.000000] modified: 00000000b7c86000 - 00000000b7cbf000 (ACPI NVS)
< [ 0.000000] modified: 00000000b7cbf000 - 00000000b7cee000 (usable)
< [ 0.000000] modified: 00000000b7cee000 - 00000000b7cff000 (ACPI data)
< [ 0.000000] modified: 00000000b7cff000 - 00000000b7d00000 (usable)
< [ 0.000000] modified: 00000000b7d00000 - 00000000c0000000 (reserved)
< [ 0.000000] modified: 00000000f8000000 - 00000000fc000000 (reserved)
< [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
< [ 0.000000] modified: 00000000fed10000 - 00000000fed14000 (reserved)
< [ 0.000000] modified: 00000000fed18000 - 00000000fed1a000 (reserved)
< [ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved)
< [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
< [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)
< [ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
< [ 0.000000] RAMDISK: 37880000 - 37fef01c
< [ 0.000000] Allocated new RAMDISK: 0087b000 - 00fea01c
< [ 0.000000] Move RAMDISK from 0000000037880000 - 0000000037fef01b to 0087b000 - 00fea01b
< [ 0.000000] ACPI: RSDP 000FE020, 0024 (r2 TOSINV)
< [ 0.000000] ACPI: XSDT B7CFE120, 0064 (r1 TOSINV TOSINV00 1 1000013)
< [ 0.000000] ACPI: FACP B7CFD000, 00F4 (r4 TOSINV TOSINV00 1 MSFT 1000013)
< [ 0.000000] ACPI: DSDT B7CF1000, 763F (r1 TOSINV TOSINV00 1 MSFT 1000013)
< [ 0.000000] ACPI: FACS B7C93000, 0040
< [ 0.000000] ACPI: HPET B7CFC000, 0038 (r1 TOSINV TOSINV00 1 MSFT 1000013)
< [ 0.000000] ACPI: APIC B7CFB000, 006C (r2 TOSINV TOSINV00 1 MSFT 1000013)
< [ 0.000000] ACPI: MCFG B7CFA000, 003C (r1 TOSINV TOSINV00 1 MSFT 1000013)
< [ 0.000000] ACPI: ASF! B7CF9000, 00A5 (r32 TOSINV TOSINV00 1 MSFT 1000013)
< [ 0.000000] ACPI: SLIC B7CF0000, 0176 (r1 TOSINV TOSINV00 1 MSFT 1000013)
< [ 0.000000] ACPI: BOOT B7CEF000, 0028 (r1 TOSINV TOSINV00 1 MSFT 1000013)
< [ 0.000000] ACPI: SSDT B7CEE000, 0655 (r1 PmRef CpuPm 3000 INTL 20051117)
< [ 0.000000] ACPI: Local APIC address 0xfee00000
< [ 0.000000] 2057MB HIGHMEM available.
< [ 0.000000] 883MB LOWMEM available.
< [ 0.000000] mapped low ram: 0 - 373fe000
< [ 0.000000] low ram: 00000000 - 373fe000
< [ 0.000000] bootmap 00012000 - 00018e80
< [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
< [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
< [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
< [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
< [ 0.000000] #3 [0000100000 - 00008760ac] TEXT DATA BSS ==> [0000100000 - 00008760ac]
< [ 0.000000] #4 [0000877000 - 000087b000] INIT_PG_TABLE ==> [0000877000 - 000087b000]
< [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
< [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
< [ 0.000000] #7 [000087b000 - 0000fea01c] NEW RAMDISK ==> [000087b000 - 0000fea01c]
< [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
< [ 0.000000] Zone PFN ranges:
< [ 0.000000] DMA 0x00000000 -> 0x00001000
< [ 0.000000] Normal 0x00001000 -> 0x000373fe
< [ 0.000000] HighMem 0x000373fe -> 0x000b7d00
< [ 0.000000] Movable zone start PFN for each node
< [ 0.000000] early_node_map[7] active PFN ranges
< [ 0.000000] 0: 0x00000000 -> 0x00000002
< [ 0.000000] 0: 0x00000006 -> 0x00000007
< [ 0.000000] 0: 0x00000010 -> 0x00000092
< [ 0.000000] 0: 0x00000100 -> 0x000b7b6c
< [ 0.000000] 0: 0x000b7bbf -> 0x000b7c86
< [ 0.000000] 0: 0x000b7cbf -> 0x000b7cee
< [ 0.000000] 0: 0x000b7cff -> 0x000b7d00
< [ 0.000000] On node 0 totalpages: 752616
< [ 0.000000] free_area_init_node: node 0, pgdat c06ca500, node_mem_map c1000000
< [ 0.000000] DMA zone: 32 pages used for memmap
< [ 0.000000] DMA zone: 0 pages reserved
< [ 0.000000] DMA zone: 3941 pages, LIFO batch:0
< [ 0.000000] Normal zone: 1736 pages used for memmap
< [ 0.000000] Normal zone: 220470 pages, LIFO batch:31
< [ 0.000000] HighMem zone: 4115 pages used for memmap
< [ 0.000000] HighMem zone: 522322 pages, LIFO batch:31
< [ 0.000000] Movable zone: 0 pages used for memmap
< [ 0.000000] ACPI: PM-Timer IO Port: 0x408
< [ 0.000000] ACPI: Local APIC address 0xfee00000
< [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
< [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
< [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
< [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
< [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
< [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
< [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
< [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
< [ 0.000000] ACPI: IRQ0 used by override.
< [ 0.000000] ACPI: IRQ2 used by override.
< [ 0.000000] ACPI: IRQ9 used by override.
< [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
< [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
< [ 0.000000] Using ACPI (MADT) for SMP configuration information
< [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
< [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
< [ 0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000
< [ 0.000000] PM: Registered nosave memory: 0000000000092000 - 00000000000a0000
< [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
< [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
< [ 0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:38000000)
< [ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
< [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1
< [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 746733
< [ 0.000000] Kernel command line: root=UUID=25e23e03-4581-4c85-8e06-49def9e90418 ro quiet splash
< [ 0.000000] Enabling fast FPU save and restore... done.
< [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
< [ 0.000000] Initializing CPU#0
< [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
< [ 0.000000] Fast TSC calibration using PIT
< [ 0.000000] Detected 1995.245 MHz processor.
< [ 0.004000] Console: colour VGA+ 80x25
< [ 0.004000] console [tty0] enabled
< [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
< [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
< [ 0.004000] allocated 15057920 bytes of page_cgroup
< [ 0.004000] please try cgroup_disable=memory option if you don't want
< [ 0.004000] Scanning for low memory corruption every 60 seconds
< [ 0.004000] Memory: 2955008k/3011584k available (4115k kernel code, 54608k reserved, 2196k data, 532k init, 2105748k highmem)
< [ 0.004000] virtual kernel memory layout:
< [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
< [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
< [ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
< [ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
< [ 0.004000] .init : 0xc0731000 - 0xc07b6000 ( 532 kB)
< [ 0.004000] .data : 0xc0504def - 0xc0729e60 (2196 kB)
---
> .004000] .data : 0xc0504def - 0xc0729e60 (2196 kB)
2038a1879,2066
> [12594.608049] usb 2-3: new high speed USB device using ehci_hcd and address 16
> [12594.746846] usb 2-3: configuration #1 chosen from 1 choice
> [12594.752217] scsi7 : SCSI emulation for USB Mass Storage devices
> [12594.753164] usb-storage: device found at 16
> [12594.753168] usb-storage: waiting for device to settle before scanning
> [12599.752767] usb-storage: device scan complete
> [12599.754100] scsi 7:0:0:0: Direct-Access Corsair VoyagerGT 1100 PQ: 0 ANSI: 0 CCS
> [12599.760077] sd 7:0:0:0: [sdb] 31784960 512-byte hardware sectors: (16.2 GB/15.1 GiB)
> [12599.767113] sd 7:0:0:0: [sdb] Write Protect is off
> [12599.767120] sd 7:0:0:0: [sdb] Mode Sense: 43 00 00 00
> [12599.767125] sd 7:0:0:0: [sdb] Assuming drive cache: write through
> [12599.771837] sd 7:0:0:0: [sdb] 31784960 512-byte hardware sectors: (16.2 GB/15.1 GiB)
> [12599.773781] sd 7:0:0:0: [sdb] Write Protect is off
> [12599.773788] sd 7:0:0:0: [sdb] Mode Sense: 43 00 00 00
> [12599.773793] sd 7:0:0:0: [sdb] Assuming drive cache: write through
> [12599.773804] sdb: sdb1
> [12599.810455] sd 7:0:0:0: [sdb] Attached SCSI removable disk
> [12599.810584] sd 7:0:0:0: Attached scsi generic sg2 type 0
> [12632.100056] usb 2-3: reset high speed USB device using ehci_hcd and address 16
> [12647.212063] usb 2-3: device descriptor read/64, error -110
> [12662.428053] usb 2-3: device descriptor read/64, error -110
> [12662.644057] usb 2-3: reset high speed USB device using ehci_hcd and address 16
> [12677.756038] usb 2-3: device descriptor read/64, error -110
> [12692.973093] usb 2-3: device descriptor read/64, error -110
> [12693.188549] usb 2-3: reset high speed USB device using ehci_hcd and address 16
> [12703.596052] usb 2-3: device not accepting address 16, error -110
> [12703.708059] usb 2-3: reset high speed USB device using ehci_hcd and address 16
> [12714.128544] usb 2-3: device not accepting address 16, error -110
> [12714.128613] sd 7:0:0:0: Device offlined - not ready after error recovery
> [12714.128631] sd 7:0:0:0: [sdb] Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK,SUGGEST_OK
> [12714.128640] end_request: I/O error, dev sdb, sector 4416816
> [12714.128674] sd 7:0:0:0: rejecting I/O to offline device
> [12714.128713] sd 7:0:0:0: rejecting I/O to offline device
> [12714.128725] FAT: Directory bread(block 4416776) failed
> [12714.128743] sd 7:0:0:0: rejecting I/O to offline device
> [12714.128753] FAT: Directory bread(block 4416777) failed
> [12714.128763] sd 7:0:0:0: rejecting I/O to offline device
> [12714.128772] FAT: Directory bread(block 4416778) failed
> [12714.128783] sd 7:0:0:0: rejecting I/O to offline device
> [12714.128791] FAT: Directory bread(block 4416779) failed
> [12714.128801] sd 7:0:0:0: rejecting I/O to offline device
> [12714.128811] FAT: Directory bread(block 4416780) failed
> [12714.128820] sd 7:0:0:0: rejecting I/O to offline device
> [12714.128830] FAT: Directory bread(block 4416781) failed
> [12714.128840] sd 7:0:0:0: rejecting I/O to offline device
> [12714.128850] FAT: Directory bread(block 4416782) failed
> [12714.128859] sd 7:0:0:0: rejecting I/O to offline device
> [12714.128868] FAT: Directory bread(block 4416783) failed
> [12714.128880] sd 7:0:0:0: rejecting I/O to offline device
> [12714.128886] usb 2-3: USB disconnect, address 16
> [12714.128897] FAT: Directory bread(block 4416784) failed
> [12714.128907] sd 7:0:0:0: rejecting I/O to offline device
> [12714.128916] FAT: Directory bread(block 4416785) failed
> [12714.128926] sd 7:0:0:0: rejecting I/O to offline device
> [12714.128936] FAT: Directory bread(block 4416786) failed
> [12714.128945] sd 7:0:0:0: rejecting I/O to offline device
> [12714.128955] FAT: Directory bread(block 4416787) failed
> [12714.128964] sd 7:0:0:0: rejecting I/O to offline device
> [12714.128974] FAT: Directory bread(block 4416788) failed
> [12714.128983] sd 7:0:0:0: rejecting I/O to offline device
> [12714.128993] FAT: Directory bread(block 4416789) failed
> [12714.129003] sd 7:0:0:0: rejecting I/O to offline device
> [12714.129012] FAT: Directory bread(block 4416790) failed
> [12714.129023] sd 7:0:0:0: rejecting I/O to offline device
> [12714.129032] FAT: Directory bread(block 4416791) failed
> [12714.129096] sd 7:0:0:0: rejecting I/O to offline device
> [12714.129123] sd 7:0:0:0: rejecting I/O to offline device
> [12714.129132] FAT: Directory bread(block 4447240) failed
> [12714.129143] sd 7:0:0:0: rejecting I/O to offline device
> [12714.129152] FAT: Directory bread(block 4447241) failed
> [12714.129167] FAT: Directory bread(block 4447242) failed
> [12714.129183] FAT: Directory bread(block 4447243) failed
> [12714.129198] FAT: Directory bread(block 4447244) failed
> [12714.129214] FAT: Directory bread(block 4447245) failed
> [12714.129228] FAT: Directory bread(block 4447246) failed
> [12714.129241] FAT: Directory bread(block 4447247) failed
> [12714.129253] FAT: Directory bread(block 4447248) failed
> [12714.129266] FAT: Directory bread(block 4447249) failed
> [12714.129278] FAT: Directory bread(block 4447250) failed
> [12714.129290] FAT: Directory bread(block 4447251) failed
> [12714.129302] FAT: Directory bread(block 4447252) failed
> [12714.129314] FAT: Directory bread(block 4447253) failed
> [12714.129327] FAT: Directory bread(block 4447254) failed
> [12714.129339] FAT: Directory bread(block 4447255) failed
> [12714.131568] sd 7:0:0:0: [sdb] READ CAPACITY failed
> [12714.131575] sd 7:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
> [12714.131583] sd 7:0:0:0: [sdb] Sense not available.
> [12714.131610] sd 7:0:0:0: [sdb] Write Protect is off
> [12714.131614] sd 7:0:0:0: [sdb] Mode Sense: 00 00 00 00
> [12714.131619] sd 7:0:0:0: [sdb] Assuming drive cache: write through
> [12714.138446] __ratelimit: 80 callbacks suppressed
> [12714.138456] Buffer I/O error on device sdb1, logical block 31052
> [12714.138463] lost page write due to I/O error on sdb1
> [12714.138487] Buffer I/O error on device sdb1, logical block 31056
> [12714.138491] lost page write due to I/O error on sdb1
> [12714.140136] FAT: Directory bread(block 74200) failed
> [12714.141601] sd 7:0:0:0: [sdb] READ CAPACITY failed
> [12714.141607] sd 7:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
> [12714.141617] sd 7:0:0:0: [sdb] Sense not available.
> [12714.141643] sd 7:0:0:0: [sdb] Write Protect is off
> [12714.141649] sd 7:0:0:0: [sdb] Mode Sense: 00 00 00 00
> [12714.141655] sd 7:0:0:0: [sdb] Assuming drive cache: write through
> [12714.141913] sd 7:0:0:0: [sdb] READ CAPACITY failed
> [12714.141918] sd 7:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
> [12714.141925] sd 7:0:0:0: [sdb] Sense not available.
> [12714.141950] sd 7:0:0:0: [sdb] Write Protect is off
> [12714.141955] sd 7:0:0:0: [sdb] Mode Sense: 00 00 00 00
> [12714.141961] sd 7:0:0:0: [sdb] Assuming drive cache: write through
> [12714.142012] Buffer I/O error on device sdb, logical block 0
> [12714.142021] Buffer I/O error on device sdb, logical block 1
> [12714.142028] Buffer I/O error on device sdb, logical block 2
> [12714.142034] Buffer I/O error on device sdb, logical block 3
> [12714.142055] Buffer I/O error on device sdb, logical block 0
> [12714.142104] Buffer I/O error on device sdb, logical block 0
> [12714.148965] FAT: Directory bread(block 74201) failed
> [12714.149007] FAT: Directory bread(block 74202) failed
> [12714.149023] FAT: Directory bread(block 74203) failed
> [12714.149039] FAT: Directory bread(block 74204) failed
> [12714.149054] FAT: Directory bread(block 74205) failed
> [12714.149067] FAT: Directory bread(block 74206) failed
> [12714.149080] FAT: Directory bread(block 74207) failed
> [12714.149095] FAT: Directory bread(block 74208) failed
> [12714.149107] FAT: Directory bread(block 74209) failed
> [12714.149119] FAT: Directory bread(block 74210) failed
> [12714.149131] FAT: Directory bread(block 74211) failed
> [12714.149142] FAT: Directory bread(block 74212) failed
> [12714.149154] FAT: Directory bread(block 74213) failed
> [12714.149166] FAT: Directory bread(block 74214) failed
> [12714.149177] FAT: Directory bread(block 74215) failed
> [12714.149810] FAT: Directory bread(block 74200) failed
> [12714.149824] FAT: Directory bread(block 74201) failed
> [12714.149836] FAT: Directory bread(block 74202) failed
> [12714.149847] FAT: Directory bread(block 74203) failed
> [12714.149859] FAT: Directory bread(block 74204) failed
> [12714.149871] FAT: Directory bread(block 74205) failed
> [12714.149883] FAT: Directory bread(block 74206) failed
> [12714.149895] FAT: Directory bread(block 74207) failed
> [12714.149906] FAT: Directory bread(block 74208) failed
> [12714.149918] FAT: Directory bread(block 74209) failed
> [12714.149929] FAT: Directory bread(block 74210) failed
> [12714.149941] FAT: Directory bread(block 74211) failed
> [12714.149952] FAT: Directory bread(block 74212) failed
> [12714.149964] FAT: Directory bread(block 74213) failed
> [12714.149976] FAT: Directory bread(block 74214) failed
> [12714.149987] FAT: Directory bread(block 74215) failed
> [12714.151823] sd 7:0:0:0: [sdb] READ CAPACITY failed
> [12714.151829] sd 7:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
> [12714.151836] sd 7:0:0:0: [sdb] Sense not available.
> [12714.152171] sd 7:0:0:0: [sdb] Write Protect is off
> [12714.152176] sd 7:0:0:0: [sdb] Mode Sense: 00 00 00 00
> [12714.152180] sd 7:0:0:0: [sdb] Assuming drive cache: write through
> [12714.176551] Buffer I/O error on device sdb1, logical block 1
> [12714.176557] lost page write due to I/O error on sdb1
> [12714.176872] Buffer I/O error on device sdb1, logical block 1967
> [12714.176879] lost page write due to I/O error on sdb1
> [12714.209579] FAT: Directory bread(block 31048) failed
> [12714.209598] FAT: Directory bread(block 31049) failed
> [12714.209614] FAT: Directory bread(block 31050) failed
> [12714.209627] FAT: Directory bread(block 31051) failed
> [12714.209639] FAT: Directory bread(block 31052) failed
> [12714.209650] FAT: Directory bread(block 31053) failed
> [12714.209679] FAT: Directory bread(block 31054) failed
> [12714.209693] FAT: Directory bread(block 31055) failed
> [12714.209704] FAT: Directory bread(block 31056) failed
> [12714.209716] FAT: Directory bread(block 31057) failed
> [12714.209727] FAT: Directory bread(block 31058) failed
> [12714.209739] FAT: Directory bread(block 31059) failed
> [12714.209750] FAT: Directory bread(block 31060) failed
> [12714.209762] FAT: Directory bread(block 31061) failed
> [12714.209774] FAT: Directory bread(block 31062) failed
> [12714.209786] FAT: Directory bread(block 31063) failed
> [12714.212401] FAT: Directory bread(block 31048) failed
> [12714.212417] FAT: Directory bread(block 31049) failed
> [12714.212430] FAT: Directory bread(block 31050) failed
> [12714.212443] FAT: Directory bread(block 31051) failed
> [12714.212455] FAT: Directory bread(block 31052) failed
> [12714.212468] FAT: Directory bread(block 31053) failed
> [12714.212480] FAT: Directory bread(block 31054) failed
> [12714.212493] FAT: Directory bread(block 31055) failed
> [12714.212505] FAT: Directory bread(block 31056) failed
> [12714.212516] FAT: Directory bread(block 31057) failed
> [12714.212528] FAT: Directory bread(block 31058) failed
> [12714.212540] FAT: Directory bread(block 31059) failed
> [12714.212552] FAT: Directory bread(block 31060) failed
> [12714.212564] FAT: Directory bread(block 31061) failed
> [12714.212577] FAT: Directory bread(block 31062) failed
> [12714.212589] FAT: Directory bread(block 31063) failed
> [12714.257948] FAT: bread failed in fat_clusters_flush
gymnazium@Pracovna:/tmp$
-
a co ted s tím?
-
hlášky kolem usb 2-3
neinstaloval jste nové jádro? neměnil nastavení USB v biosu? Na jiném počítači flash jde otevřít?
-
google
TESTDISK
http://www.cgsecurity.org/wiki/TestDisk_Download
-
hlášky kolem usb 2-3
neinstaloval jste nové jádro? neměnil nastavení USB v biosu? Na jiném počítači flash jde otevřít?
toto asi bude ono...! Instaloval jsem nové jádro a USB disk jsem zapoměl před tím vyjmout. Na jiném PC se otevře jsko prázdné. Na ntb, kde mám UBUNTU , se mi otevře se všemi složkami, které na něm byly původně, ale po kliknutí na složku se zobrazí USB corsair nelze najít.
-
google
TESTDISK
http://www.cgsecurity.org/wiki/TestDisk_Download
složky se půodařilo zobrazit, ale ne otevřít.
Na USB mi jde jen o diplomovou práci, ostatní složky mám zachované v zálohách asi měsíc staré. Smiřuji se s tím, že USB vyhodím a diplomku již přepisuji .
Děkuji za pomoc.
-
Používáš aktuální verzi Ubuntu nebo starší?
-
Používáš aktuální verzi Ubuntu nebo starší?
používán aktuální, ale to myslím na to nemá vliv...
-
Ale má...
"Spousta problému lze vyřešit tím že se používají předchozí nebo LTS verze"
Kvůli novému jádru mi přestalo fungovat připojení mobilu k počítači přes usb,prostě ho to nevidí.
-
Ale má...
"Spousta problému lze vyřešit tím že se používají předchozí nebo LTS verze"
Kvůli novému jádru mi přestalo fungovat připojení mobilu k počítači přes usb,prostě ho to nevidí.
Co si budem povídat. Je nutné odolat pokušení, když vše funguje a nové jádra nezkoušet ;-) :p
-
Už to znova neudělám,takovej šok a spousta nefungujících věcí,to radši poběžím na commodorovi :)
-
Ale to by potom byla děsná nuda :D Sláva Commodore 64 a Basicu :)
-
Krom toho ze se na tom strasne psalo a klavesy se zadrhavaly protoze byly odporne vysoke tak to byl uzasny stroj :P ale zpet k topicu,do poledne se asi nedockame odpovedi.