Fórum Ubuntu CZ/SK
Ostatní => Archiv => Téma založeno: shrek69 31 Října 2006, 20:22:28
-
Zdravim na vyse uvede graficke karte tv vystup. Upravil jsem xorg.conf a doplnil tam toto:
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NV17 [GeForce4 MX 440]"
BusID "PCI:1:0:0"
Option "TwinView"
Option "SecondMonitorHorizSync" "30-50"
Option "SecondMonitorVertRefresh" "60"
Option "TwinViewOrientation" "Clone"
Option "MetaModes" "1024x768,1024x768;800x600,800x600;640x480,640x480;320x200,NULL"
Option "TVStandard" "PAL-G"
Option "ConnectedMonitor" "CRT,TV"
EndSection
TV vystup funguje, akorad bez barev. Vse je cernobile (coz mi popravde malinko vadi :) ). Tak jsem hledal, zkousel a nakonec jsem misto PAL-G nastavil NTSC, kdy byl obraz po te sice barevny, ale obraz byl zase silene rozmazany. Jako tv vystup z karty mam konektor svideo a vstup do tv (Mascom) mam scart....
Drive na stare karte GeForce 440MX mi ve fungovalo jak melo, ale nevim jak rozbehnout obraz tak, aby se na nej dalo koukat...
diky za nejake napady....
-
Hoď sem celej xorg.
-
Tady je:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
# Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "NVIDIA Corporation NVIDIA Default Card"
Driver "nvidia"
BusID "PCI:7:0:0"
Option "TwinView"
Option "SecondMonitorHorizSync" "30-50"
Option "SecondMonitorVertRefresh" "60"
Option "TwinViewOrientation" "Clone"
Option "MetaModes" "1280x1024, 1024x768,1024x768;800x600,800x600;640x480,640x480;320x200,NULL"
Option "TVStandard" "PAL-G"
Option "ConnectedMonitor" "CRT,TV"
EndSection
Section "Monitor"
Identifier "BenQ FP71G+"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NVIDIA Default Card"
Monitor "BenQ FP71G+"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
-
v tom sectio device ti chybí toto:
Option "TVOutFormat" "COMPOSITE"
Option "TVStandard" "PAL-D"compisite znamená, že to je přes svideo-divný co? Ale fachá to.
-
mno ja to musel upravit na svideo, me to jinak nejde.... :(
a i kdyz jsem tam dal ten PAL-D, tak je obraz sice barevnej, ale rozmazanej....
-
Zkus mi please poslat svuj xorg.conf .. staci jen to co se tyka karty a tv vystupu ...
diky :)
-
Section "Device"
Identifier "Generic Video Card"
Driver "nvidia"
BusID "PCI:1:0:0"
Option "TwinView" "true"
Option "TwinViewOrientation" "Clone"
Option "TVOutFormat" "COMPOSITE"
Option "TVStandard" "PAL-D"
Option "SecondMonitorHorizSync" "30-50"
Option "SecondMonitorVertRefresh" "60"
Option "MetaModes" "1024x768,1024x768;800x600,800x600"
Option "UseFBDev" "true"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 28-64
VertRefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
Jen mě štve, že neumim udělat rozlišení monitoru 1280x1024, bere mi to jen 1024x768, takže když chci koukat na video v telce měnim xorg.conf :( Jo a mam to připojený přes svideo a funguje to tak jak má.
-
Diky, hned vyzkousim ;)
-
Mno tak take nepomohlo .... :(
Jdu skocit z okna :)
-
já tam mam SVIDEO a PAL-G. funguje úžasně.
-
Me to fungovalo take dobre na GF 440MX, ale s touto kartou mam jen neprijemnosti... :(
-
Doporučuji vytáhnout z televize přívod od antény:) Návodů, jak rozchodit výstup na televizi je spousta, ale tohle se v nich obvykle vůbec nedozvíte.
Jinak k tomu černobílému obrazu - pokud byste měl správný kabel, tj. skutečnou redukci z SVidea na kompozitní video, nemusel byste tam tu volbu COMPOSITE vůbec dávat. Výrobcům kabelu je nicméně líto koruny za kondenzátor, takže takový kabel těžko seženete.
-
v televizi mam rozhodně i kabel od antény. funguje to stejně.
-
Mimochodem nedavno jsem si poridil karu s TV-vystupem a mel sem taky problem s CB obrazem a tim mazlim obrazem (byli strasne mazli barvy) vyresil sem to tak ze na me TV (Hundai) mam dva scart a zkusil sem ten druhy(je mozne ze u prvniho spatny kontakt,slo to tam podezrelke tezko) a pak kdyz dam na tv AV, tak jedna volba je RGB a tam je ten obraz ostry,ale CB a kdyz pokracuju v mackani tlacitka AV, tak najdu volbu SVHS (nebo tak nejak,ted nejsem doma) a tam uz je obraz OK barevny ostry,takze mozna nastaveni TV .
-
Jeste upresnim ze ze zacatku sel bud ostry CB nebo hodne mazli Barevny (volba RGB a SVHS) a jeste ma karta je GF7300GT , ale snad je to stejny problem jak u 7600. Takze hodne stesti
-
Premer si vsechny kabely mezi PC a TV(myslim ze to je stineni). Uz sem dostkrat cet, ze neni zapojeny a pak to dela neco podobnyho :( jestli to je softwarem, tak kdyztak mrkni na muj xorg
http://forum.ubuntu.cz/viewtopic.php?id=12083
Je to hodne predelavany ;)
dneska sem akorat menil tohle kuli TV Outu:
Section "Device"
Identifier "NVIDIA Corporation NVIDIA Default Card"
Driver "nvidia"
Option "TVOutFormat" "Composite"
Option "TVStandard" "NTSC"
Option "TwinView"
Option "MetaModes" "1024x768,1024x768;800x600,800x600;640x480,640x480"
Option "HorizSync" "DFP-0: 30-75; TV-0: 30-50"
Option "VertRefresh" "DFP-0: 50-85; TV-0: 60"
Option "TwinViewOrientation" "Clone"
Option "ConnetedMonitor" "CRT, TV"
EndSection