Fórum Ubuntu CZ/SK
Ubuntu pro osobní počítače => Obecná podpora => Téma založeno: nezik 01 Února 2010, 20:13:35
-
Stává se mi v poslední době, že mi po startu ubuntu 9.10 nejedou některé služby (cups, samba...). Jdou ale nahodit ručně v terminálu. Netušíte někdo čím by to mohlo být?
Tady je dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-18-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #55-Ubuntu SMP Fri Jan 8 14:55:26 UTC 2010 (Ubuntu 2.6.31-18.55-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000098000 (usable)
[ 0.000000] BIOS-e820: 0000000000098000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fedf800 (usable)
[ 0.000000] BIOS-e820: 000000007fedf800 - 000000007fee0000 (reserved)
[ 0.000000] BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x7fedf max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 0000000000098000 (usable)
[ 0.000000] modified: 0000000000098000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007fedf800 (usable)
[ 0.000000] modified: 000000007fedf800 - 000000007fee0000 (reserved)
[ 0.000000] modified: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
[ 0.000000] modified: 000000007fee3000 - 000000007fef0000 (ACPI data)
[ 0.000000] modified: 000000007fef0000 - 000000007ff00000 (reserved)
[ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] RAMDISK: 3789f000 - 37fefacd
[ 0.000000] Allocated new RAMDISK: 008b2000 - 01002acd
[ 0.000000] Move RAMDISK from 000000003789f000 - 0000000037fefacc to 008b2000 - 01002acc
[ 0.000000] ACPI: RSDP 000f83a0 00024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 7fee30c0 00054 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 7fee7900 000F4 (v03 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 7fee3280 0463B (v01 HPQOEM SLIC-CPC 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 7fee0000 00040
[ 0.000000] ACPI: SLIC 7fee7b40 00176 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
[ 0.000000] ACPI: HPET 7fee7d00 00038 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000098)
[ 0.000000] ACPI: MCFG 7fee7d80 0003C (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 7fee7a40 00084 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
[ 0.000000] ACPI: SSDT 7fee82e0 00304 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1158MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00011000 - 00017f00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008ad060] TEXT DATA BSS ==> [0000100000 - 00008ad060]
[ 0.000000] #4 [0000098000 - 0000100000] BIOS reserved ==> [0000098000 - 0000100000]
[ 0.000000] #5 [00008ae000 - 00008b1608] BRK ==> [00008ae000 - 00008b1608]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #7 [00008b2000 - 0001002acd] NEW RAMDISK ==> [00008b2000 - 0001002acd]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00f5f10] f5f10
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007fedf
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x00000098
[ 0.000000] 0: 0x00000100 -> 0x0007fedf
[ 0.000000] On node 0 totalpages: 523879
[ 0.000000] free_area_init_node: node 0, pgdat c0788920, node_mem_map c1003200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3944 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2318 pages used for memmap
[ 0.000000] HighMem zone: 294355 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000098000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:70100000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c200d000, static data 35612 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519785
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.31-18-generic root=UUID=e10332e7-74ff-41fd-b2a8-99a914716419 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 10479660 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007fedf)
[ 0.000000] Memory: 2051604k/2095996k available (4578k kernel code, 43068k reserved, 2146k data, 540k init, 1186692k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc0792000 - 0xc0819000 ( 540 kB)
[ 0.000000] .data : 0xc0578a34 - 0xc0791448 (2146 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0578a34 (4578 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:440
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2000.346 MHz processor.
[ 0.001453] Console: colour VGA+ 80x25
[ 0.001456] console [tty0] enabled
[ 0.001614] hpet clockevent registered
[ 0.001617] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.001623] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.69 BogoMIPS (lpj=8001384)
[ 0.001641] Security Framework initialized
[ 0.001662] AppArmor: AppArmor initialized
[ 0.001670] Mount-cache hash table entries: 512
[ 0.001803] Initializing cgroup subsys ns
[ 0.001808] Initializing cgroup subsys cpuacct
[ 0.001813] Initializing cgroup subsys memory
[ 0.001820] Initializing cgroup subsys freezer
[ 0.001822] Initializing cgroup subsys net_cls
[ 0.001837] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.001840] CPU: L2 cache: 2048K
[ 0.001842] CPU: Physical Processor ID: 0
[ 0.001844] CPU: Processor Core ID: 0
[ 0.001848] mce: CPU supports 6 MCE banks
[ 0.001856] CPU0: Thermal monitoring enabled (TM2)
[ 0.001859] using mwait in idle threads.
[ 0.001866] Performance Counters: Core2 events, Intel PMU driver.
[ 0.001874] ... version: 2
[ 0.001876] ... bit width: 40
[ 0.001878] ... generic counters: 2
[ 0.001880] ... value mask: 000000ffffffffff
[ 0.001882] ... max period: 000000007fffffff
[ 0.001884] ... fixed-purpose counters: 3
[ 0.001885] ... counter mask: 0000000700000003
[ 0.001890] Checking 'hlt' instruction... OK.
[ 0.018583] ACPI: Core revision 20090521
[ 0.028386] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.070912] CPU0: Intel(R) Core(TM)2 Duo CPU E4400 @ 2.00GHz stepping 0d
[ 0.072001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4001.09 BogoMIPS (lpj=8002188)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] mce: CPU supports 6 MCE banks
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.157495] CPU1: Intel(R) Core(TM)2 Duo CPU E4400 @ 2.00GHz stepping 0d
[ 0.157509] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.160024] Brought up 2 CPUs
[ 0.160027] Total of 2 processors activated (8001.78 BogoMIPS).
[ 0.160072] CPU0 attaching sched-domain:
[ 0.160075] domain 0: span 0-1 level MC
[ 0.160078] groups: 0 1
[ 0.160083] CPU1 attaching sched-domain:
[ 0.160085] domain 0: span 0-1 level MC
[ 0.160088] groups: 1 0
[ 0.160166] Booting paravirtualized kernel on bare hardware
[ 0.160203] regulator: core version 0.5
[ 0.160203] Time: 18:24:18 Date: 02/01/10
[ 0.160203] NET: Registered protocol family 16
[ 0.160206] EISA bus registered
[ 0.160216] ACPI: bus type pci registered
[ 0.160283] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.160286] PCI: MCFG area at f0000000 reserved in E820
[ 0.160288] PCI: Using MMCONFIG for extended config space
[ 0.160290] PCI: Using configuration type 1 for base access
[ 0.161320] bio: create slab <bio-0> at 0
[ 0.164209] ACPI: EC: Look up EC in DSDT
[ 0.170148] ACPI: Interpreter enabled
[ 0.170157] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.170187] ACPI: Using IOAPIC for interrupt routing
[ 0.174328] ACPI: No dock devices found.
[ 0.174425] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.174537] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.174541] pci 0000:00:01.0: PME# disabled
[ 0.174610] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfdff8000-0xfdffbfff]
[ 0.174655] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.174659] pci 0000:00:1b.0: PME# disabled
[ 0.174706] pci 0000:00:1d.0: reg 20 io port: [0xff00-0xff1f]
[ 0.174757] pci 0000:00:1d.1: reg 20 io port: [0xfe00-0xfe1f]
[ 0.174809] pci 0000:00:1d.2: reg 20 io port: [0xfd00-0xfd1f]
[ 0.174860] pci 0000:00:1d.3: reg 20 io port: [0xfc00-0xfc1f]
[ 0.174909] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdfff000-0xfdfff3ff]
[ 0.174958] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.174963] pci 0000:00:1d.7: PME# disabled
[ 0.175120] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.175127] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.175134] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.175141] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.175148] pci 0000:00:1f.1: reg 20 io port: [0xfb00-0xfb0f]
[ 0.175197] pci 0000:00:1f.2: reg 10 io port: [0xfa00-0xfa07]
[ 0.175203] pci 0000:00:1f.2: reg 14 io port: [0xf900-0xf903]
[ 0.175210] pci 0000:00:1f.2: reg 18 io port: [0xf800-0xf807]
[ 0.175216] pci 0000:00:1f.2: reg 1c io port: [0xf700-0xf703]
[ 0.175222] pci 0000:00:1f.2: reg 20 io port: [0xf600-0xf60f]
[ 0.175229] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfdffe000-0xfdffe3ff]
[ 0.175256] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.175260] pci 0000:00:1f.2: PME# disabled
[ 0.175309] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
[ 0.175368] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
[ 0.175378] pci 0000:01:00.0: reg 14 64bit mmio: [0xe0000000-0xefffffff]
[ 0.175388] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff]
[ 0.175394] pci 0000:01:00.0: reg 24 io port: [0xdf00-0xdf7f]
[ 0.175400] pci 0000:01:00.0: reg 30 32bit mmio: [0xfbfe0000-0xfbffffff]
[ 0.175469] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
[ 0.175473] pci 0000:00:01.0: bridge 32bit mmio: [0xf8000000-0xfbffffff]
[ 0.175478] pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
[ 0.175515] pci 0000:02:01.0: reg 10 32bit mmio: [0xfdeff000-0xfdefffff]
[ 0.175565] pci 0000:02:01.0: supports D1 D2
[ 0.175567] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot
[ 0.175572] pci 0000:02:01.0: PME# disabled
[ 0.175609] pci 0000:02:04.0: reg 10 io port: [0xef00-0xef07]
[ 0.175617] pci 0000:02:04.0: reg 14 io port: [0xee00-0xee03]
[ 0.175624] pci 0000:02:04.0: reg 18 io port: [0xed00-0xed07]
[ 0.175632] pci 0000:02:04.0: reg 1c io port: [0xec00-0xec03]
[ 0.175639] pci 0000:02:04.0: reg 20 io port: [0xeb00-0xeb0f]
[ 0.175646] pci 0000:02:04.0: reg 24 32bit mmio: [0xfdefe000-0xfdefe1ff]
[ 0.175654] pci 0000:02:04.0: reg 30 32bit mmio: [0xfde00000-0xfde7ffff]
[ 0.175674] pci 0000:02:04.0: supports D1 D2
[ 0.175713] pci 0000:02:08.0: reg 10 32bit mmio: [0xfdefd000-0xfdefdfff]
[ 0.175721] pci 0000:02:08.0: reg 14 io port: [0xea00-0xea3f]
[ 0.175764] pci 0000:02:08.0: supports D1 D2
[ 0.175766] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.175771] pci 0000:02:08.0: PME# disabled
[ 0.175809] pci 0000:00:1e.0: transparent bridge
[ 0.175814] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
[ 0.175818] pci 0000:00:1e.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.175832] pci_bus 0000:00: on NUMA node 0
[ 0.175837] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.176022] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.186706] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.186817] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.186928] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.187036] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.187144] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.187252] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.187361] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.187471] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 *7 9 10 11 12 14 15)
[ 0.187661] SCSI subsystem initialized
[ 0.187696] libata version 3.00 loaded.
[ 0.187696] usbcore: registered new interface driver usbfs
[ 0.187696] usbcore: registered new interface driver hub
[ 0.187696] usbcore: registered new device driver usb
[ 0.187696] ACPI: WMI: Mapper loaded
[ 0.187696] PCI: Using ACPI for IRQ routing
[ 0.200011] Bluetooth: Core ver 2.15
[ 0.200033] NET: Registered protocol family 31
[ 0.200033] Bluetooth: HCI device and connection manager initialized
[ 0.200033] Bluetooth: HCI socket layer initialized
[ 0.200033] NetLabel: Initializing
[ 0.200033] NetLabel: domain hash size = 128
[ 0.200033] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.200052] NetLabel: unlabeled traffic allowed by default
[ 0.200098] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.200103] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.216054] pnp: PnP ACPI init
[ 0.216072] ACPI: bus type pnp registered
[ 0.217690] ACPI Error: Field [ASSM] at 524320 exceeds Buffer [BUF0] size 688 (bits) 20090521 dsopcode-596
[ 0.217698] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.MEM_._CRS] (Node f7015990), AE_AML_BUFFER_LIMIT
[ 0.217722] ACPI Error (uteval-0256): Method execution failed [\_SB_.MEM_._CRS] (Node f7015990), AE_AML_BUFFER_LIMIT
[ 0.217730] pnp 00:0b: can't evaluate _CRS: 12298
[ 0.217783] pnp: PnP ACPI: found 12 devices
[ 0.217785] ACPI: ACPI bus type pnp unregistered
[ 0.217790] PnPBIOS: Disabled by ACPI PNP
[ 0.217800] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.217803] system 00:01: ioport range 0x800-0x87f has been reserved
[ 0.217806] system 00:01: ioport range 0x294-0x297 has been reserved
[ 0.217809] system 00:01: ioport range 0x880-0x88f has been reserved
[ 0.217817] system 00:08: ioport range 0x400-0x4bf has been reserved
[ 0.217823] system 00:0a: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.252481] AppArmor: AppArmor Filesystem Enabled
[ 0.252497] pci 0000:02:04.0: BAR 6: address space collision on of device [0xfde00000-0xfde7ffff]
[ 0.252518] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.252521] pci 0000:00:01.0: IO window: 0xd000-0xdfff
[ 0.252525] pci 0000:00:01.0: MEM window: 0xf8000000-0xfbffffff
[ 0.252529] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff
[ 0.252535] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.252538] pci 0000:00:1e.0: IO window: 0xe000-0xefff
[ 0.252544] pci 0000:00:1e.0: MEM window: 0xfde00000-0xfdefffff
[ 0.252548] pci 0000:00:1e.0: PREFETCH window: 0x80000000-0x800fffff
[ 0.252558] alloc irq_desc for 16 on node -1
[ 0.252560] alloc kstat_irqs on node -1
[ 0.252565] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.252570] pci 0000:00:01.0: setting latency timer to 64
[ 0.252576] pci 0000:00:1e.0: setting latency timer to 64
[ 0.252580] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.252583] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.252585] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff]
[ 0.252588] pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfbffffff]
[ 0.252590] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff]
[ 0.252593] pci_bus 0000:02: resource 0 io: [0xe000-0xefff]
[ 0.252595] pci_bus 0000:02: resource 1 mem: [0xfde00000-0xfdefffff]
[ 0.252598] pci_bus 0000:02: resource 2 pref mem [0x80000000-0x800fffff]
[ 0.252601] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.252603] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.252635] NET: Registered protocol family 2
[ 0.252733] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.253042] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.253569] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.253801] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.253804] TCP reno registered
[ 0.253882] NET: Registered protocol family 1
[ 0.253944] Trying to unpack rootfs image as initramfs...
[ 0.441269] Freeing initrd memory: 7490k freed
[ 0.445046] cpufreq-nforce2: No nForce2 chipset.
[ 0.445079] Scanning for low memory corruption every 60 seconds
[ 0.445186] audit: initializing netlink socket (disabled)
[ 0.445204] type=2000 audit(1265048657.444:1): initialized
[ 0.453952] highmem bounce pool size: 64 pages
[ 0.453957] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.455442] VFS: Disk quotas dquot_6.5.2
[ 0.455503] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.456051] fuse init (API version 7.12)
[ 0.456140] msgmni has been set to 1705
[ 0.456352] alg: No test for stdrng (krng)
[ 0.456367] io scheduler noop registered
[ 0.456369] io scheduler anticipatory registered
[ 0.456371] io scheduler deadline registered
[ 0.456412] io scheduler cfq registered (default)
[ 0.456516] pci 0000:01:00.0: Boot video device
[ 0.456530] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[ 0.456640] alloc irq_desc for 24 on node -1
díky moc za radu.
-
pokračování dmesg:
[ 0.456642] alloc kstat_irqs on node -1
[ 0.456652] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.456659] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 0.456736] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.456764] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.456898] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.456902] ACPI: Power Button [PWRF]
[ 0.456953] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.456955] ACPI: Power Button [PWRB]
[ 0.457013] fan PNP0C0B:00: registered as cooling_device0
[ 0.457019] ACPI: Fan [FAN] (on)
[ 0.457484] ACPI: SSDT 7fee7e00 001B7 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
[ 0.457705] processor LNXCPU:00: registered as cooling_device1
[ 0.457878] ACPI: SSDT 7fee8210 000CE (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
[ 0.458083] processor LNXCPU:01: registered as cooling_device2
[ 0.460095] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.460104] ACPI: Thermal Zone [THRM] (10 C)
[ 0.460156] isapnp: Scanning for PnP cards...
[ 0.501609] Switched to high resolution mode on CPU 1
[ 0.504075] Switched to high resolution mode on CPU 0
[ 0.813211] isapnp: No Plug & Play device found
[ 0.814315] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.815617] brd: module loaded
[ 0.816084] loop: module loaded
[ 0.816149] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.816221] ahci 0000:00:1f.2: version 3.0
[ 0.816234] alloc irq_desc for 19 on node -1
[ 0.816236] alloc kstat_irqs on node -1
[ 0.816241] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.816265] alloc irq_desc for 25 on node -1
[ 0.816266] alloc kstat_irqs on node -1
[ 0.816274] ahci 0000:00:1f.2: irq 25 for MSI/MSI-X
[ 0.816335] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl RAID mode
[ 0.816338] ahci 0000:00:1f.2: flags: 64bit ncq led clo
[ 0.816342] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.816588] scsi0 : ahci
[ 0.816672] scsi1 : ahci
[ 0.816722] scsi2 : ahci
[ 0.816771] scsi3 : ahci
[ 0.816880] ata1: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe100 irq 25
[ 0.816883] ata2: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe180 irq 25
[ 0.816886] ata3: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe200 irq 25
[ 0.816889] ata4: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe280 irq 25
[ 0.816938] ata_piix 0000:00:1f.1: version 2.13
[ 0.816946] alloc irq_desc for 18 on node -1
[ 0.816948] alloc kstat_irqs on node -1
[ 0.816952] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.816983] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.817045] scsi4 : ata_piix
[ 0.817100] scsi5 : ata_piix
[ 0.817477] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfb00 irq 14
[ 0.817480] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfb08 irq 15
[ 0.817541] sata_sil 0000:02:04.0: version 2.4
[ 0.817563] sata_sil 0000:02:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.817624] scsi6 : sata_sil
[ 0.817685] scsi7 : sata_sil
[ 0.817731] ata7: SATA max UDMA/100 mmio m512@0xfdefe000 tf 0xfdefe080 irq 16
[ 0.817735] ata8: SATA max UDMA/100 mmio m512@0xfdefe000 tf 0xfdefe0c0 irq 16
[ 0.817789] ata6: port disabled. ignoring.
[ 0.818539] Fixed MDIO Bus: probed
[ 0.818575] PPP generic driver version 2.4.2
[ 0.818675] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.818693] alloc irq_desc for 23 on node -1
[ 0.818695] alloc kstat_irqs on node -1
[ 0.818699] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.818708] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.818712] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.818741] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.818746] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.822637] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.822650] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000
[ 0.836532] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.836650] usb usb1: configuration #1 chosen from 1 choice
[ 0.836679] hub 1-0:1.0: USB hub found
[ 0.836687] hub 1-0:1.0: 8 ports detected
[ 0.836749] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.836765] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.836792] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.836798] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.836802] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.836830] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.836852] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff00
[ 0.836933] usb usb2: configuration #1 chosen from 1 choice
[ 0.836958] hub 2-0:1.0: USB hub found
[ 0.836964] hub 2-0:1.0: 2 ports detected
[ 0.837006] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.837011] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.837015] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.837041] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.837070] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fe00
[ 0.837145] usb usb3: configuration #1 chosen from 1 choice
[ 0.837170] hub 3-0:1.0: USB hub found
[ 0.837176] hub 3-0:1.0: 2 ports detected
[ 0.837215] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.837221] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.837224] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.837256] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.837284] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fd00
[ 0.837356] usb usb4: configuration #1 chosen from 1 choice
[ 0.837381] hub 4-0:1.0: USB hub found
[ 0.837387] hub 4-0:1.0: 2 ports detected
[ 0.837430] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.837436] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.837439] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.837466] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.837488] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fc00
[ 0.837558] usb usb5: configuration #1 chosen from 1 choice
[ 0.837583] hub 5-0:1.0: USB hub found
[ 0.837589] hub 5-0:1.0: 2 ports detected
[ 0.837679] PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
[ 0.837681] PNP: PS/2 controller doesn't have KBD irq; using default 1
[ 0.839913] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.839919] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.839978] mice: PS/2 mouse device common for all mice
[ 0.840085] rtc_cmos 00:04: RTC can wake from S4
[ 0.840115] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.840139] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.840237] device-mapper: uevent: version 1.0.3
[ 0.840318] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.840380] device-mapper: multipath: version 1.1.0 loaded
[ 0.840382] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.840487] EISA: Probing bus 0 at eisa.0
[ 0.840514] EISA: Detected 0 cards.
[ 0.840592] cpuidle: using governor ladder
[ 0.840594] cpuidle: using governor menu
[ 0.841090] TCP cubic registered
[ 0.841245] NET: Registered protocol family 10
[ 0.841714] lo: Disabled Privacy Extensions
[ 0.842055] NET: Registered protocol family 17
[ 0.842072] Bluetooth: L2CAP ver 2.13
[ 0.842073] Bluetooth: L2CAP socket layer initialized
[ 0.842076] Bluetooth: SCO (Voice Link) ver 0.6
[ 0.842078] Bluetooth: SCO socket layer initialized
[ 0.842105] Bluetooth: RFCOMM TTY layer initialized
[ 0.842109] Bluetooth: RFCOMM socket layer initialized
[ 0.842111] Bluetooth: RFCOMM ver 1.11
[ 0.843122] Using IPI No-Shortcut mode
[ 0.843207] PM: Resume from disk failed.
[ 0.843219] registered taskstats version 1
[ 0.843341] Magic number: 14:332:442
[ 0.843412] rtc_cmos 00:04: setting system clock to 2010-02-01 18:24:18 UTC (1265048658)
[ 0.843416] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.843417] EDD information not available.
[ 1.136044] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.136067] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.136092] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.136109] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.136474] ata4.00: ATA-8: ST3750528AS, HP21, max UDMA/100
[ 1.136479] ata4.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.136775] ata1.00: ATA-7: ST3400820AS, 3.AHG, max UDMA/100
[ 1.136780] ata1.00: 781422768 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.136838] ata2.00: ATA-7: ST3400820AS, 3.AHG, max UDMA/100
[ 1.136843] ata2.00: 781422768 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.136883] ata3.00: ATA-7: ST3250820AS, 3.CHL, max UDMA/100
[ 1.136886] ata3.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.137094] ata4.00: configured for UDMA/100
[ 1.137761] ata1.00: configured for UDMA/100
[ 1.137809] ata2.00: configured for UDMA/100
[ 1.137826] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xf t4
[ 1.137828] ata2: irq_stat 0x00400040, connection status changed
[ 1.137833] ata2: hard resetting link
[ 1.137884] ata3.00: configured for UDMA/100
[ 1.137893] ata3: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xf t4
[ 1.137895] ata3: irq_stat 0x00400040, connection status changed
[ 1.137899] ata3: hard resetting link
[ 1.137946] scsi 0:0:0:0: Direct-Access ATA ST3400820AS 3.AH PQ: 0 ANSI: 5
[ 1.138069] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.138106] sd 0:0:0:0: [sda] 781422768 512-byte logical blocks: (400 GB/372 GiB)
[ 1.138151] sd 0:0:0:0: [sda] Write Protect is off
[ 1.138154] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.138177] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.138303] sda:
[ 1.144056] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1.145739] sda1 sda2 <
[ 1.152254] ata7.00: ATAPI: TSSTcorpCD/DVDW TS-H653L, 0514, max UDMA/33
[ 1.152267] ata7.00: applying bridge limits
[ 1.154708] sda5 sda6 >
[ 1.162500] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.168276] ata7.00: configured for UDMA/33
[ 1.428026] usb 1-7: new high speed USB device using ehci_hcd and address 5
[ 1.577766] usb 1-7: configuration #1 chosen from 1 choice
[ 1.820031] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 1.860037] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.860042] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.861749] ata2.00: configured for UDMA/100
[ 1.861754] ata2: EH complete
[ 1.861854] scsi 1:0:0:0: Direct-Access ATA ST3400820AS 3.AH PQ: 0 ANSI: 5
[ 1.861870] ata3.00: configured for UDMA/100
[ 1.861872] ata3: EH complete
[ 1.861954] sd 1:0:0:0: [sdb] 781422768 512-byte logical blocks: (400 GB/372 GiB)
[ 1.861959] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.861999] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.862002] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.862025] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.862042] scsi 2:0:0:0: Direct-Access ATA ST3250820AS 3.CH PQ: 0 ANSI: 5
[ 1.862141] sdb:
[ 1.862143] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.862174] sd 2:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.862217] sd 2:0:0:0: [sdc] Write Protect is off
[ 1.862220] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.862243] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.862349] sdc:
[ 1.862430] scsi 3:0:0:0: Direct-Access ATA ST3750528AS HP21 PQ: 0 ANSI: 5
[ 1.862529] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 1.862562] sd 3:0:0:0: [sdd] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 1.862607] sd 3:0:0:0: [sdd] Write Protect is off
[ 1.862609] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 1.862632] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.862740] sdd:
[ 1.863674] scsi 6:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-H653L 0514 PQ: 0 ANSI: 5
[ 1.865028] sdd1
[ 1.865215] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 1.870256] sdc1 sdc2
[ 1.870395] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.870399] Uniform CD-ROM driver Revision: 3.20
[ 1.870514] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 1.870578] sr 6:0:0:0: Attached scsi generic sg4 type 5
[ 1.876105] sdb1
[ 1.876292] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.892716] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 2.054136] usb 2-1: configuration #1 chosen from 1 choice
[ 2.188058] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2.196237] ata8.00: ATA-8: ST31500341AS, HP22, max UDMA/100
[ 2.196239] ata8.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.228256] ata8.00: configured for UDMA/100
[ 2.228335] scsi 7:0:0:0: Direct-Access ATA ST31500341AS HP22 PQ: 0 ANSI: 5
[ 2.228430] sd 7:0:0:0: [sde] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 2.228440] sd 7:0:0:0: Attached scsi generic sg5 type 0
[ 2.228476] sd 7:0:0:0: [sde] Write Protect is off
[ 2.228479] sd 7:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 2.228503] sd 7:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.228616] sde: sde1
[ 2.253767] sd 7:0:0:0: [sde] Attached SCSI disk
[ 2.253787] Freeing unused kernel memory: 540k freed
[ 2.254061] Write protecting the kernel text: 4580k
[ 2.254107] Write protecting the kernel read-only data: 1840k
[ 2.300033] usb 2-2: new low speed USB device using uhci_hcd and address 3
[ 2.359637] Linux agpgart interface v0.103
[ 2.444027] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 2.444031] e100: Copyright(c) 1999-2006 Intel Corporation
[ 2.444083] alloc irq_desc for 20 on node -1
[ 2.444085] alloc kstat_irqs on node -1
[ 2.444093] e100 0000:02:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.469136] e100 0000:02:08.0: PME# disabled
[ 2.472433] e100: eth0: e100_probe: addr 0xfdefd000, irq 20, MAC addr 00:1d:60:12:e5:58
[ 2.477771] ohci1394 0000:02:01.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.486332] Initializing USB Mass Storage driver...
[ 2.486497] scsi8 : SCSI emulation for USB Mass Storage devices
[ 2.486644] usbcore: registered new interface driver usb-storage
[ 2.486647] USB Mass Storage support registered.
[ 2.486821] usb-storage: device found at 5
[ 2.486823] usb-storage: waiting for device to settle before scanning
[ 2.497239] usb 2-2: configuration #1 chosen from 1 choice
[ 2.505353] usbcore: registered new interface driver hiddev
[ 2.505436] usbcore: registered new interface driver usbhid
[ 2.505439] usbhid: v2.6:USB HID core driver
[ 2.521546] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input3
[ 2.521621] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-2/input0
[ 2.534152] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20] MMIO=[fdeff000-fdeff7ff] Max Packet=[1024] IR/IT contexts=[8/8]
[ 2.553285] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
[ 2.554018] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input4
[ 2.554150] logitech 0003:046D:C517.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2/input1
[ 2.752017] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 3.010484] usb 3-1: configuration #1 chosen from 1 choice
[ 3.840609] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80001673c1f]
[ 7.484184] usb-storage: device scan complete
[ 7.490683] scsi 8:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
[ 7.497174] scsi 8:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
[ 7.503799] scsi 8:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
[ 7.510425] scsi 8:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
[ 7.510851] sd 8:0:0:0: Attached scsi generic sg6 type 0
[ 7.510948] sd 8:0:0:1: Attached scsi generic sg7 type 0
[ 7.511038] sd 8:0:0:2: Attached scsi generic sg8 type 0
[ 7.511131] sd 8:0:0:3: Attached scsi generic sg9 type 0
[ 7.519177] sd 8:0:0:0: [sdf] Attached SCSI removable disk
[ 7.519917] sd 8:0:0:1: [sdg] Attached SCSI removable disk
[ 7.520665] sd 8:0:0:2: [sdh] Attached SCSI removable disk
[ 7.524879] sd 8:0:0:3: [sdi] Attached SCSI removable disk
[ 9.012264] EXT4-fs (sda5): barriers enabled
[ 9.022426] kjournald2 starting: pid 517, dev sda5:8, commit interval 5 seconds
[ 9.022486] EXT4-fs (sda5): delayed allocation enabled
[ 9.022492] EXT4-fs: file extents enabled
[ 9.023348] EXT4-fs: mballoc enabled
[ 9.023363] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 9.686987] type=1505 audit(1265048667.340:2): operation="profile_load" pid=542 name=/usr/share/gdm/guest-session/Xsession
[ 9.689389] type=1505 audit(1265048667.344:3): operation="profile_load" pid=543 name=/sbin/dhclient3
[ 9.690120] type=1505 audit(1265048667.344:4): operation="profile_load" pid=543 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 9.690515] type=1505 audit(1265048667.344:5): operation="profile_load" pid=543 name=/usr/lib/connman/scripts/dhclient-script
[ 9.712813] type=1505 audit(1265048667.368:6): operation="profile_load" pid=544 name=/usr/bin/evince
[ 9.724627] type=1505 audit(1265048667.380:7): operation="profile_load" pid=544 name=/usr/bin/evince-previewer
[ 9.731545] type=1505 audit(1265048667.384:8): operation="profile_load" pid=544 name=/usr/bin/evince-thumbnailer
[ 9.748256] type=1505 audit(1265048667.404:9): operation="profile_load" pid=546 name=/usr/lib/cups/backend/cups-pdf
[ 9.749108] type=1505 audit(1265048667.404:10): operation="profile_load" pid=546 name=/usr/sbin/cupsd
[ 9.763099] type=1505 audit(1265048667.416:11): operation="profile_load" pid=547 name=/usr/sbin/tcpdump
[ 24.228175] udev: starting version 147
[ 24.237897] Adding 4096564k swap on /dev/sdc2. Priority:-1 extents:1 across:4096564k
[ 24.461816] nvidia: module license 'NVIDIA' taints kernel.
[ 24.461821] Disabling lock debugging due to kernel taint
[ 24.673518] Bluetooth: Generic Bluetooth USB driver ver 0.5
[ 24.673621] usbcore: registered new interface driver btusb
[ 24.677927] Linux video capture interface: v2.00
[ 24.679852] gspca: main v2.6.0 registered
[ 24.680675] gspca: probing 093a:2471
[ 24.684176] pac207: Pixart Sensor ID 0x27 Chips ID 0x00
[ 24.684179] pac207: Pixart PAC207BCA Image Processor and Control Chip detected (vid/pid 0x093A:0x2471)
[ 24.685160] lp: driver loaded but no devices found
[ 24.692959] gspca: probe ok
[ 24.692985] usbcore: registered new interface driver pac207
[ 24.692988] pac207: registered
[ 24.698735] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.747121] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 24.777714] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 24.777742] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 24.784329] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 24.784338] nvidia 0000:01:00.0: setting latency timer to 64
[ 24.784534] NVRM: loading NVIDIA UNIX x86 Kernel Module 185.18.36 Fri Aug 14 17:18:04 PDT 2009
[ 24.847713] hda_codec: Unknown model for ALC1200, trying auto-probe from BIOS...
[ 24.847982] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[ 25.123284] EXT4-fs (sda5): internal journal on sda5:8
[ 25.513043] kjournald starting. Commit interval 5 seconds
[ 25.513205] EXT3 FS on sda1, internal journal
[ 25.513213] EXT3-fs: mounted filesystem with writeback data mode.
[ 25.821324] EXT4-fs (sdc1): barriers enabled
[ 25.842902] kjournald2 starting: pid 1120, dev sdc1:8, commit interval 5 seconds
[ 25.843199] EXT4-fs (sdc1): internal journal on sdc1:8
[ 25.843205] EXT4-fs (sdc1): delayed allocation enabled
[ 25.843210] EXT4-fs: file extents enabled
[ 25.844618] EXT4-fs: mballoc enabled
[ 25.844633] EXT4-fs (sdc1): mounted filesystem with ordered data mode
[ 25.971207] EXT4-fs (sdd1): barriers enabled
[ 25.973019] kjournald2 starting: pid 1256, dev sdd1:8, commit interval 5 seconds
[ 25.977032] EXT4-fs (sdd1): internal journal on sdd1:8
[ 25.977038] EXT4-fs (sdd1): delayed allocation enabled
[ 25.977042] EXT4-fs: file extents enabled
[ 26.027304] type=1505 audit(1265048683.680:12): operation="profile_replace" pid=1282 name=/usr/share/gdm/guest-session/Xsession
[ 26.028956] type=1505 audit(1265048683.684:13): operation="profile_replace" pid=1283 name=/sbin/dhclient3
[ 26.029690] type=1505 audit(1265048683.684:14): operation="profile_replace" pid=1283 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 26.030088] type=1505 audit(1265048683.684:15): operation="profile_replace" pid=1283 name=/usr/lib/connman/scripts/dhclient-script
[ 26.038281] type=1505 audit(1265048683.692:16): operation="profile_replace" pid=1285 name=/usr/bin/evince
[ 26.050278] type=1505 audit(1265048683.704:17): operation="profile_replace" pid=1285 name=/usr/bin/evince-previewer
[ 26.059857] type=1505 audit(1265048683.712:18): operation="profile_replace" pid=1285 name=/usr/bin/evince-thumbnailer
[ 26.066528] EXT4-fs: mballoc enabled
[ 26.066552] EXT4-fs (sdd1): mounted filesystem with ordered data mode
[ 26.076352] type=1505 audit(1265048683.732:19): operation="profile_replace" pid=1294 name=/usr/lib/cups/backend/cups-pdf
[ 26.077244] type=1505 audit(1265048683.732:20): operation="profile_replace" pid=1294 name=/usr/sbin/cupsd
[ 26.079788] type=1505 audit(1265048683.732:21): operation="profile_replace" pid=1298 name=/usr/sbin/tcpdump
[ 26.089523] EXT4-fs (sdb1): barriers enabled
[ 26.109345] kjournald2 starting: pid 1317, dev sdb1:8, commit interval 5 seconds
[ 26.116027] EXT4-fs (sdb1): internal journal on sdb1:8
[ 26.116033] EXT4-fs (sdb1): delayed allocation enabled
[ 26.116037] EXT4-fs: file extents enabled
[ 26.171595] EXT4-fs: mballoc enabled
[ 26.171615] EXT4-fs (sdb1): mounted filesystem with ordered data mode
-
Vyznáš se v těchto odkazech?
http://ohioloco.ubuntuforums.org/showthread.php?t=1359292
http://ubuntuforums.org/showthread.php?t=1305226&page=4
-
děkuju k+
pomohl ten první odkaz a v něm změna CONCURRENCY=shell na none
jestli jsem to dobře pochopil, tak v KK je nějakej bug, kterej znemožňuje používat tuhle fintu.