Fórum Ubuntu CZ/SK
Ubuntu pro osobní počítače => Instalace, aktualizace a spouštění => Téma založeno: Rostislav 02 Března 2010, 10:10:29
-
Po korektní instalaci Ubuntu 9.10 na pevný disk společný s Windows XP se při opětovném spuštění neustále nabízí GRUB tabulka, ale systém nenaběhne a PC restartuje a znova se objeví GRUB tabulka a tak pořád dokola, prosím co s tím?
tady je info boot script
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #5 for /boot/grub.
sda1: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows XP
Boot files/dirs: /boot.ini /ntldr /NTDETECT.COM
sda2: _________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 9.10
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda6: _________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ _____________________________________________________
Disk /dev/sda: 120,0 GB, 120 034 123 776 bajtů
hlav: 255, sektorů na stopu: 63, cylindrů: 14 593, celkem 234 441 648 sektorů
Jednotky = sektory po 1 * 512 = 512 bajtech
Identifikátor disku: 0x7bc57bc5
Partition Boot Start End Size Id System
/dev/sda1 * 63 139,315,679 139,315,617 7 HPFS/NTFS
/dev/sda2 139,315,680 234,436,544 95,120,865 5 Extended
/dev/sda5 139,315,743 230,452,424 91,136,682 83 Linux
/dev/sda6 230,452,488 234,436,544 3,984,057 82 Linux swap / Solaris
blkid -c /dev/null: ____________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 683C1FF13C1FB950 ntfs WINXP
/dev/sda5 7c445838-a6bf-4f46-91a3-f452086d082f ext4
/dev/sda6 c8bcb06a-98bf-4c7c-847b-2f4636bbed4f swap
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
aufs / aufs (rw)
/dev/sr0 /cdrom iso9660 (rw)
/dev/loop0 /rofs squashfs (rw)
================================ sda1/boot.ini: ================================
[Boot Loader]
Timeout=5
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[Operating Systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect
=========================== sda5/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s /boot/grub/grubenv ]; then
have_grubenv=true
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
saved_entry=${prev_saved_entry}
save_env saved_entry
prev_saved_entry=
save_env prev_saved_entry
fi
insmod ext2
set root=(hd0,5)
search --no-floppy --fs-uuid --set 7c445838-a6bf-4f46-91a3-f452086d082f
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/white
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry "Ubuntu, Linux 2.6.31-19-generic" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,5)
search --no-floppy --fs-uuid --set 7c445838-a6bf-4f46-91a3-f452086d082f
linux /boot/vmlinuz-2.6.31-19-generic root=UUID=7c445838-a6bf-4f46-91a3-f452086d082f ro quiet splash
initrd /boot/initrd.img-2.6.31-19-generic
}
menuentry "Ubuntu, Linux 2.6.31-19-generic (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd0,5)
search --no-floppy --fs-uuid --set 7c445838-a6bf-4f46-91a3-f452086d082f
linux /boot/vmlinuz-2.6.31-19-generic root=UUID=7c445838-a6bf-4f46-91a3-f452086d082f ro single
initrd /boot/initrd.img-2.6.31-19-generic
}
menuentry "Ubuntu, Linux 2.6.31-14-generic" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,5)
search --no-floppy --fs-uuid --set 7c445838-a6bf-4f46-91a3-f452086d082f
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=7c445838-a6bf-4f46-91a3-f452086d082f ro quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
}
menuentry "Ubuntu, Linux 2.6.31-14-generic (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd0,5)
search --no-floppy --fs-uuid --set 7c445838-a6bf-4f46-91a3-f452086d082f
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=7c445838-a6bf-4f46-91a3-f452086d082f ro single
initrd /boot/initrd.img-2.6.31-14-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Microsoft Windows XP Professional (on /dev/sda1)" {
insmod ntfs
set root=(hd0,1)
search --no-floppy --fs-uuid --set 683c1ff13c1fb950
drivemap -s (hd0) ${root}
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sda5/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda5 during installation
UUID=7c445838-a6bf-4f46-91a3-f452086d082f / ext4 errors=remount-ro 0 1
# swap was on /dev/sda6 during installation
UUID=c8bcb06a-98bf-4c7c-847b-2f4636bbed4f none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
=================== sda5: Location of files loaded by Grub: ===================
77.3GB: boot/grub/core.img
77.2GB: boot/grub/grub.cfg
71.7GB: boot/initrd.img-2.6.31-14-generic
72.0GB: boot/initrd.img-2.6.31-19-generic
71.7GB: boot/vmlinuz-2.6.31-14-generic
71.9GB: boot/vmlinuz-2.6.31-19-generic
72.0GB: initrd.img
71.7GB: initrd.img.old
71.9GB: vmlinuz
71.7GB: vmlinuz.old
-
jsem ve stejné situaci - presel jsem z ubuntu 9 na 10 a ted mi to dela tohle. existuje nejake reseni?
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #7 for /boot/grub.
sda1: _________________________________________________________________________
File system: ntfs
Boot sector type: Grub 2
Boot sector info: Grub 2 is installed in the boot sector of sda1 and
looks at sector 69348746 of the same hard drive for
core.img, but core.img can not be found at this
location. No errors found in the Boot Parameter Block.
Operating System: Windows XP
Boot files/dirs: /boot.ini /ntldr /NTDETECT.COM
sda2: _________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: _________________________________________________________________________
File system: ntfs
Boot sector type: Grub 2
Boot sector info: Grub 2 is installed in the boot sector of sda5 and
looks at sector 69237026 of the same hard drive for
core.img, but core.img can not be found at this
location. According to the info in the boot sector,
sda5 starts at sector 59697603. But according to the
info from fdisk, sda5 starts at sector 122094063.
Operating System:
Boot files/dirs:
sda6: _________________________________________________________________________
File system: ntfs
Boot sector type: Grub 2
Boot sector info: Grub 2 is installed in the boot sector of sda6 and
looks at sector 69239946 of the same hard drive for
core.img, but core.img can not be found at this
location. According to the info in the boot sector,
sda6 starts at sector 63.
Operating System:
Boot files/dirs:
sda7: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04 LTS
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda8: _________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info: