Fórum Ubuntu CZ/SK
Ubuntu pro osobní počítače => Obecná podpora => Téma založeno: Sesijama 11 Května 2010, 21:21:44
-
Dobrý den
existuje pro Ubuntu 10.04 (Linux) software na architektonické návrhy a na návrhy rozvodů vody, elektřiny, plynu,...
Předem děkuji za tipy
Sesijama
-
No nevím ale na 3D je dobrý Blender a něco jako AutoCAD zase Qcad, oba jsou česky.
Qcad nainstaluješ příkazem v terminálu
sudo apt-get install qcad qcad-datapoté doporučuji poprvé spustit z termínálu se sudo aby tě furt neotravovalo s uvodní otázkou
sudo qcada pak už normálně bez sudo a můžeš si vytvořit spouštěč na ploše ;)
Snad ti to trochu pomůže. :-\
-
mozes skusit aj archimedes, ten by mal byt primarne urceny pre architektov, ale ci je v repozitaroch to netusim..
http://archimedes.iv.org.br/portal/project/archimedes-project
-
Ještě tu existuje možnost instalace windows verze pod wine nebo lépe CrossOver-> lepší wine
Já tak provozuji Microsoft Office a Corel Draw a funguje úplně všechno a rychleji než pod windows a dokonce šlape i tisk ;D
-
Blender
Blender je na animaci, ne na návrhy schémat.
Je to výpis z jiné distribuce, dávám to sem abych Vám ušetřil hledání.
Musíte se na to mrknout sám. Je to kompletní, jak mi to vyjelo.
* sci-electronics/alliance [ Masked ]
Latest version available: 5.0.20070718
Latest version installed: [ Not Installed ]
Size of files: 10,669 kB
Homepage: http://www-asim.lip6.fr/recherche/alliance/
Description: Digital IC design tools (simulation, synthesis, place/route, etc...).
License: GPL-2 LGPL-2
* sci-electronics/balsa [ Masked ]
Latest version available: 3.5
Latest version installed: [ Not Installed ]
Size of files: 7,392 kB
Homepage: http://www.cs.manchester.ac.uk/apt/projects/tools/balsa/
Description: The Balsa asynchronous synthesis system
License: GPL-2
* sci-electronics/chipmunksystem [ Masked ]
Latest version available: 20060624
Latest version installed: [ Not Installed ]
Size of files: 4,520 kB
Homepage: http://www.cs.berkeley.edu/~lazzaro/chipmunk/
Description: Chipmunk System - circuit schematic and simulation environment
License: GPL-1
* sci-electronics/cirkuit [ Masked ]
Latest version available: 0.2.2
Latest version installed: [ Not Installed ]
Size of files: 420 kB
Homepage: http://wwwu.uni-klu.ac.at/magostin/cirkuit.html
Description: An application to generate publication-ready figures
License: GPL-2
* sci-electronics/eagle
Latest version available: 5.6.0
Latest version installed: [ Not Installed ]
Size of files: 26,012 kB
Homepage: http://www.cadsoft.de
Description: CadSoft EAGLE schematic and printed circuit board (PCB) layout editor
License: cadsoft
* sci-electronics/electric
Latest version available: 8.09
Latest version installed: [ Not Installed ]
Size of files: 10,842 kB
Homepage: http://www.gnu.org/software/electric/electric.html
Description: Complete Electronic Design Automation (EDA) system that can handle many forms of circuit design
License: GPL-2
* sci-electronics/electronics-menu
Latest version available: 1.0
Latest version installed: [ Not Installed ]
Size of files: 11 kB
Homepage: http://www.gpleda.org/
Description: Creates an "Electronics" desktop menu
License: GPL-2
* sci-electronics/espresso-ab [ Masked ]
Latest version available: 1.0
Latest version installed: [ Not Installed ]
Size of files: 143 kB
Homepage: http://www.cs.man.ac.uk/apt/projects/balsa/
Description: POSIX compliant version of the espresso logic minimization tool
License: BSD
* sci-electronics/freehdl [ Masked ]
Latest version available: 0.0.7
Latest version installed: [ Not Installed ]
Size of files: 1,361 kB
Homepage: http://freehdl.seul.org/
Description: A free VHDL simulator.
License: GPL-2
* sci-electronics/geda
Latest version available: 1.4.0-r1
Latest version installed: [ Not Installed ]
Size of files: 5,165 kB
Homepage: http://www.geda.seul.org
Description: Core metapackage for all the necessary components you would need for a minimal gEDA/gaf system
License: GPL-2
* sci-electronics/geda-docs [ Masked ]
Latest version available: 1.4.3
Latest version installed: [ Not Installed ]
Size of files: 1,795 kB
Homepage: http://www.gpleda.org/
Description: GPL Electronic Design Automation: documentation
License: GPL-2
* sci-electronics/geda-examples [ Masked ]
Latest version available: 1.4.3
Latest version installed: [ Not Installed ]
Size of files: 256 kB
Homepage: http://www.gpleda.org/
Description: GPL Electronic Design Automation: examples
License: GPL-2
* sci-electronics/geda-gattrib [ Masked ]
Latest version available: 1.4.3
Latest version installed: [ Not Installed ]
Size of files: 318 kB
Homepage: http://www.gpleda.org/
Description: GPL Electronic Design Automation: attribute editor
License: GPL-2
* sci-electronics/geda-gnetlist [ Masked ]
Latest version available: 1.4.3
Latest version installed: [ Not Installed ]
Size of files: 398 kB
Homepage: http://www.gpleda.org/
Description: GPL Electronic Design Automation: netlist generator
License: GPL-2
* sci-electronics/geda-gschem [ Masked ]
Latest version available: 1.4.3
Latest version installed: [ Not Installed ]
Size of files: 1,118 kB
Homepage: http://www.gpleda.org/
Description: GPL Electronic Design Automation: schematic editor
License: GPL-2
* sci-electronics/geda-gsymcheck [ Masked ]
Latest version available: 1.4.3
Latest version installed: [ Not Installed ]
Size of files: 169 kB
Homepage: http://www.gpleda.org/
Description: GPL Electronic Design Automation: symbol checker
License: GPL-2
* sci-electronics/geda-suite [ Masked ]
Latest version available: 20050820
Latest version installed: [ Not Installed ]
Size of files: 0 kB
Homepage: http://www.geda.seul.org
Description: Metapackage which installs all the components required for a full-featured gEDA/gaf system
License: GPL-2
* sci-electronics/geda-symbols [ Masked ]
Latest version available: 1.4.3
Latest version installed: [ Not Installed ]
Size of files: 823 kB
Homepage: http://www.gpleda.org/
Description: GPL Electronic Design Automation: symbols
License: GPL-2
* sci-electronics/geda-utils [ Masked ]
Latest version available: 1.4.3
Latest version installed: [ Not Installed ]
Size of files: 321 kB
Homepage: http://www.gpleda.org/
Description: GPL Electronic Design Automation: utilities
License: GPL-2
* sci-electronics/geda-xgsch2pcb [ Masked ]
Latest version available: 0.1.3
Latest version installed: [ Not Installed ]
Size of files: 156 kB
Homepage: http://www.gpleda.org/tools/xgsch2pcb/index.html
Description: A graphical front-end for the gschem -> pcb workflow
License: GPL-2
* sci-electronics/gerbv
Latest version available: 1.0.1-r1
Latest version installed: [ Not Installed ]
Size of files: 1,009 kB
Homepage: http://www.geda.seul.org
Description: gerbv - The gEDA Gerber Viewer
License: GPL-2
* sci-electronics/ghdl [ Masked ]
Latest version available: 0.29
Latest version installed: [ Not Installed ]
Size of files: 24,525 kB
Homepage: http://ghdl.free.fr
Description: Complete VHDL simulator using the GCC technology
License: GPL-2
* sci-electronics/gnetman [ Masked ]
Latest version available: 0.0.1_pre20060522-r1
Latest version installed: [ Not Installed ]
Size of files: 740 kB
Homepage: http://www.viasic.com/opensource/
Description: A GNU Netlist Manipulation Library
License: GPL-2
* sci-electronics/gnucap
Latest version available: 0.35
Latest version installed: [ Not Installed ]
Size of files: 985 kB
Homepage: http://www.gnucap.org/
Description: GNUCap is the GNU Circuit Analysis Package
License: GPL-2
* sci-electronics/gplcver [ Masked ]
Latest version available: 2.12a
Latest version installed: [ Not Installed ]
Size of files: 1,195 kB
Homepage: http://www.pragmatic-c.com/gpl-cver
Description: Verilog simulator
License: GPL-2
* sci-electronics/gresistor [ Masked ]
Latest version available: 0.0.1
Latest version installed: [ Not Installed ]
Size of files: 24 kB
Homepage: http://www.roroid.ro/index.php?option=com_content&view=article&id=1:gresistor&catid=1:software-projects&Itemid=2
Description: Translate a resistor color codes into a readable value
License: || ( GPL-3 LGPL-3 )
* sci-electronics/gspeakers
Latest version available: 0.11
Latest version installed: [ Not Installed ]
Size of files: 533 kB
Homepage: http://gspeakers.sourceforge.net/
Description: GTK based loudspeaker enclosure and crossovernetwork designer
License: LGPL-2.1
* sci-electronics/gtkwave
Latest version available: 3.1.1
Latest version installed: [ Not Installed ]
Size of files: 3,859 kB
Homepage: http://home.nc.rr.com/gtkwave/
Description: A wave viewer for LXT, LXT2, VZT, GHW and standard Verilog VCD/EVCD files
License: GPL-2 MIT
* sci-electronics/gwave [ Masked ]
Latest version available: 20090213
Latest version installed: [ Not Installed ]
Size of files: 394 kB
Homepage: http://www.geda.seul.org/tools/gwave/
Description: Analog waveform viewer for SPICE-like simulations
License: GPL-2
* sci-electronics/iverilog
Latest version available: 0.9.1
Latest version installed: [ Not Installed ]
Size of files: 1,087 kB
Homepage: http://www.icarus.com/eda/verilog/
Description: A Verilog simulation and synthesis tool
License: GPL-2
* sci-electronics/kicad
Latest version available: 20090320.1666-r2
Latest version installed: [ Not Installed ]
Size of files: 35,100 kB
Homepage: http://kicad.sourceforge.net
Description: Electronic Schematic and PCB design tools.
License: GPL-2
* sci-electronics/magic
Latest version available: 7.4.46-r1
Latest version installed: [ Not Installed ]
Size of files: 9,968 kB
Homepage: http://www.opencircuitdesign.com/magic/index.html
Description: The VLSI design CAD tool.
License: as-is GPL-2
* sci-electronics/ng-spice-rework [ Masked ]
Latest version available: 9999
Latest version installed: [ Not Installed ]
Size of files: 0 kB
Homepage: http://ngspice.sourceforge.net
Description: The Next Generation Spice (Electronic Circuit Simulator) from CVS HEAD.
License: BSD GPL-2
* sci-electronics/oregano
Latest version available: 0.40.5
Latest version installed: [ Not Installed ]
Size of files: 853 kB
Homepage: http://oregano.gforge.lug.fi.uba.ar/
Description: Oregano is an application for schematic capture and simulation of electrical circuits.
License: GPL-2
* sci-electronics/pcb
Latest version available: 20081128-r1
Latest version installed: [ Not Installed ]
Size of files: 4,418 kB
Homepage: http://www.gpleda.org/
Description: GPL Electronic Design Automation: Printed Circuit Board editor
License: GPL-2
* sci-electronics/petrify [ Masked ]
Latest version available: 4.2
Latest version installed: [ Not Installed ]
Size of files: 1,090 kB
Homepage: http://www.lsi.upc.edu/~jordicf/petrify/
Description: Synthesize Petri nets into asynchronous circuits
License: petrify
* sci-electronics/plcedit [ Masked ]
Latest version available: 2.1.2
Latest version installed: [ Not Installed ]
Size of files: 1,046 kB
Homepage: http://www.qt-apps.org/content/show.php/PLCEdit?content=78380
Description: Qt4 notepad for PLC programming
License: GPL-2
* sci-electronics/qelectrotech [ Masked ]
Latest version available: 0.22
Latest version installed: [ Not Installed ]
Size of files: 2,234 kB
Homepage: http://www.qt-apps.org/content/show.php?content=90198
Description: Qt4 application to design electric diagrams
License: GPL-3
* sci-electronics/qucs [ Masked ]
Latest version available: 0.0.15_p20100115
Latest version installed: [ Not Installed ]
Size of files: 1,886 kB
Homepage: http://qucs.sourceforge.net/
Description: Quite Universal Circuit Simulator is a Qt based circuit simulator
License: GPL-2
* sci-electronics/spice
Latest version available: 3.5.5-r1
Latest version installed: [ Not Installed ]
Size of files: 1,344 kB
Homepage: http://bwrc.eecs.berkeley.edu/Classes/IcBook/SPICE/
Description: general-purpose circuit simulation program
License: BSD
* sci-electronics/splat [ Masked ]
Latest version available: 1.2.2-r1
Latest version installed: [ Not Installed ]
Size of files: 294 kB
Homepage: http://www.qsl.net/kd2bd/splat.html
Description: SPLAT! is an RF Signal Propagation, Loss, And Terrain analysis tool for the spectrum between 20 MHz and 20 GHz.
License: GPL-2
* sci-electronics/systemc [ Masked ]
Latest version available: 2.2.0-r1
Latest version installed: [ Not Installed ]
Size of files: 2,002 kB
Homepage: http://www.systemc.org/
Description: A C++ based modeling platform for VLSI and system-level co-design
License: SOPLA-2.3
* sci-electronics/vbs [ Masked ]
Latest version available: 1.4.0
Latest version installed: [ Not Installed ]
Size of files: 269 kB
Homepage: http://www.geda.seul.org/tools/vbs/index.html
Description: vbs - the Verilog Behavioral Simulator
License: GPL-2
* sci-electronics/xcircuit
Latest version available: 3.4.30
Latest version installed: [ Not Installed ]
Size of files: 1,030 kB
Homepage: http://opencircuitdesign.com/xcircuit
Description: Circuit drawing and schematic capture program.
License: GPL-2
-
Ještě tu existuje možnost instalace windows verze pod wine nebo lépe CrossOver-> lepší wine
Já tak provozuji Microsoft Office a Corel Draw a funguje úplně všechno a rychleji než pod windows a dokonce šlape i tisk ;D
Widows verze jakého softu???
Dík
-
Widows verze jakého softu???
No to jsem čekal že mi řekneš ty. Měl jsem tušení že už jsi nějaký podobný soft používal třeba na windows. :-\
-
Widows verze jakého softu???
No to jsem čekal že mi řekneš ty. Měl jsem tušení že už jsi nějaký podobný soft používal třeba na windows. :-\
Já neznám žádný pro linux natož pro windows
-
Blender
Blender je na animaci, ne na návrhy schémat.
Je to výpis z jiné distribuce, dávám to sem abych Vám ušetřil hledání.
Musíte se na to mrknout sám. Je to kompletní, jak mi to vyjelo.
* sci-electronics/alliance [ Masked ]
Latest version available: 5.0.20070718
Latest version installed: [ Not Installed ]
Size of files: 10,669 kB
Homepage: http://www-asim.lip6.fr/recherche/alliance/
Description: Digital IC design tools (simulation, synthesis, place/route, etc...).
License: GPL-2 LGPL-2
Díky za snahu ale jsem z toho úplně makovej. Vůbec nevim o co jde :)
-
No nevím ale na 3D je dobrý Blender a něco jako AutoCAD zase Qcad, oba jsou česky.
Qcad nainstaluješ příkazem v terminálu
sudo apt-get install qcad qcad-datapoté doporučuji poprvé spustit z termínálu se sudo aby tě furt neotravovalo s uvodní otázkou
sudo qcada pak už normálně bez sudo a můžeš si vytvořit spouštěč na ploše ;)
Snad ti to trochu pomůže. :-\
Velice se omlouvám, ale tohle jsou dobré tipy, a odkazuji na http://www.ribbonsoft.com/cz/ (http://www.ribbonsoft.com/cz/)
Alternativa:http://www.freebyte.com/cad/cad.htm (http://www.freebyte.com/cad/cad.htm)
-
Velice se omlouvám, ale tohle jsou dobré tipy, a odkazuji na http://www.ribbonsoft.com/cz/ (http://www.ribbonsoft.com/cz/)
Tento program Qcad jsem již zmiňoval již v první odpovědi. Nemusíš ho stahovat ze stránek pač je v repozitářích.
-
Dobrý den,
z Vašeho dotazu není zřejmé co byste vlastně chtěl. Na architektonické návrhy... Prosím blíže specifikujte, co máte na mysli.
Zkusím Vám dát pár tipů:
Na Vážnou práci obecně můžete použít jakýkoli CAD - např zde zmiňovaný QCAD, v tom nakreslíte vše, na TZB jsou pak různé specializované CADy, které se odlišují pohodlností práce právě s různými objektu typu elektroinstalace, neznám přímo nativní program pro Linux, ale pod wine funguje http://www.elmer.cz a je vcelku dost rozšířený a mezi projektanty užívaný.
Pokud Vám jde o to udělat si spíše nějaké 3D modely, abyste věděl, jak bude Váš barák, byt vypadat, vřele doporučuji google Sketch-up, je to spíše malovátko s velmi nestandardním přístupem k malování, ale pokud se v něm trochu zběhnete, je velice efektivní, pěkné tutoriály na http://www.mikac.cz/3D-free-cad-sketchup-frame.html. Opět funguje pod wine.
-
Vše co potřebuji tak kreslím v Inkscape. Kreslím hlavně elektrorozvody. Možno kreslit ve vrstvách. Vřele doporučuji ;)
-
CAD programy pro návrhy vody, elektřiny, plynu atd pro Linux Ubuntu jsou celkem přehledně zde:
http://wiki.ubuntu.cz/CAD%20programy
-
CAD programy pro návrhy vody, elektřiny, plynu atd pro Linux Ubuntu jsou celkem přehledně zde:
http://wiki.ubuntu.cz/CAD%20programy
Chvilku se na wiki nepodívám a ono je tam zas tolik užitečných věcí :D Je to prostě parádička 8)