Fórum Ubuntu CZ/SK
Ubuntu pro osobní počítače => Instalace, aktualizace a spouštění => Téma založeno: tejo 29 Června 2010, 22:07:09
-
Zdravím,
mám potíže při instalaci Kubuntu Netbook 10.04. Koupil jsem si netbook Gigabyte TouchNote T1028X, kde jsou předinstalovány W7 Starter. Samozřejmě, že si tam chci hned dát Linux. Proto jsem postupoval přesně podle návodu pro instalaci z flash disku (http://wiki.ubuntu.cz/Instalace/z%20flash%20disku). Když spustím instalaci, tak bez problémů projde nastavení jazyka, časového pásma. Celý proces se zasekne po nastavení klávesnice, po čemž má následovat nastavení disku. Nahoře se mi zobrazuje průběh "Prohledávají se disky", který se vždycky zastaví na 47% a dál se to nehne ani když tomu dávám opravdu hodně času.
Nevíte někdo, co by s tím mohlo být a případně jak na to? Předem díky.
Martin
-
Jsi schopen třeba v LiveUSB spustit GParted/Editor diskových oddílů (http://wiki.ubuntu.cz/GParted) a podívat se, jestli ty "disky" vidí správně?
Případně tady dej výpis z Terminál (http://wiki.ubuntu.cz/Termin%C3%A1l)usudo fdisk -l
sudo parted -l
-
Jsi schopen třeba v LiveUSB spustit GParted/Editor diskových oddílů (http://wiki.ubuntu.cz/GParted) a podívat se, jestli ty "disky" vidí správně?
Případně tady dej výpis z Terminál (http://wiki.ubuntu.cz/Termin%C3%A1l)usudo fdisk -l
sudo parted -l
Tak zatim jsem schopen dostat pouze ty vypisy. Gparted se mi nedari rozchodit.
Tady je vypis z sudo fdisk -l:
ubuntu@ubuntu:~$ sudo fdisk -l
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x6583aa7e
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 102400 7 HPFS/NTFS
Partition 1 does not end on cylinder boundary.
/dev/sda2 13 13068 104857600 7 HPFS/NTFS
Partition 2 does not end on cylinder boundary.
/dev/sda3 13068 29328 130611892+ b W95 FAT32
/dev/sda4 29328 30402 8625667+ de Dell Utility
Disk /dev/sdb: 4009 MB, 4009754624 bytes
23 heads, 23 sectors/track, 14804 cylinders
Units = cylinders of 529 * 512 = 270848 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x85d0456f
Device Boot Start End Blocks Id System
/dev/sdb1 * 16 14805 3911744 c W95 FAT32 (LBA)
Disk /dev/sdc: 130 MB, 130809856 bytes
5 heads, 50 sectors/track, 1021 cylinders
Units = cylinders of 250 * 512 = 128000 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x6f20736b
This doesn't look like a partition table
Probably you selected the wrong device.
Device Boot Start End Blocks Id System
/dev/sdc1 ? 3112544 7678583 570754815+ 72 Unknown
Partition 1 has different physical/logical beginnings (non-Linux?):
phys=(357, 116, 40) logical=(3112543, 3, 9)
Partition 1 has different physical/logical endings:
phys=(357, 32, 45) logical=(7678582, 0, 39)
Partition 1 does not end on cylinder boundary.
/dev/sdc2 ? 674759 8418872 968014120 65 Novell Netware 386
Partition 2 has different physical/logical beginnings (non-Linux?):
phys=(288, 115, 43) logical=(674758, 0, 23)
Partition 2 has different physical/logical endings:
phys=(367, 114, 50) logical=(8418871, 0, 12)
Partition 2 does not end on cylinder boundary.
/dev/sdc3 ? 7479526 15223639 968014096 79 Unknown
Partition 3 has different physical/logical beginnings (non-Linux?):
phys=(366, 32, 33) logical=(7479525, 4, 16)
Partition 3 has different physical/logical endings:
phys=(357, 32, 43) logical=(15223638, 3, 7)
Partition 3 does not end on cylinder boundary.
/dev/sdc4 ? 1 14548906 1818613248 d Unknown
Partition 4 has different physical/logical beginnings (non-Linux?):
phys=(372, 97, 50) logical=(0, 0, 1)
Partition 4 has different physical/logical endings:
phys=(0, 10, 0) logical=(14548905, 4, 46)
Partition 4 does not end on cylinder boundary.
Partition table entries are not in disk order
A vypis z sudo parted -l je tady:
ubuntu@ubuntu:~$ sudo fdisk -l
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x6583aa7e
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 102400 7 HPFS/NTFS
Partition 1 does not end on cylinder boundary.
/dev/sda2 13 13068 104857600 7 HPFS/NTFS
Partition 2 does not end on cylinder boundary.
/dev/sda3 13068 29328 130611892+ b W95 FAT32
/dev/sda4 29328 30402 8625667+ de Dell Utility
Disk /dev/sdb: 4009 MB, 4009754624 bytes
23 heads, 23 sectors/track, 14804 cylinders
Units = cylinders of 529 * 512 = 270848 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x85d0456f
Device Boot Start End Blocks Id System
/dev/sdb1 * 16 14805 3911744 c W95 FAT32 (LBA)
Disk /dev/sdc: 130 MB, 130809856 bytes
5 heads, 50 sectors/track, 1021 cylinders
Units = cylinders of 250 * 512 = 128000 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x6f20736b
This doesn't look like a partition table
Probably you selected the wrong device.
Device Boot Start End Blocks Id System
/dev/sdc1 ? 3112544 7678583 570754815+ 72 Unknown
Partition 1 has different physical/logical beginnings (non-Linux?):
phys=(357, 116, 40) logical=(3112543, 3, 9)
Partition 1 has different physical/logical endings:
phys=(357, 32, 45) logical=(7678582, 0, 39)
Partition 1 does not end on cylinder boundary.
/dev/sdc2 ? 674759 8418872 968014120 65 Novell Netware 386
Partition 2 has different physical/logical beginnings (non-Linux?):
phys=(288, 115, 43) logical=(674758, 0, 23)
Partition 2 has different physical/logical endings:
phys=(367, 114, 50) logical=(8418871, 0, 12)
Partition 2 does not end on cylinder boundary.
/dev/sdc3 ? 7479526 15223639 968014096 79 Unknown
Partition 3 has different physical/logical beginnings (non-Linux?):
phys=(366, 32, 33) logical=(7479525, 4, 16)
Partition 3 has different physical/logical endings:
phys=(357, 32, 43) logical=(15223638, 3, 7)
Partition 3 does not end on cylinder boundary.
/dev/sdc4 ? 1 14548906 1818613248 d Unknown
Partition 4 has different physical/logical beginnings (non-Linux?):
phys=(372, 97, 50) logical=(0, 0, 1)
Partition 4 has different physical/logical endings:
phys=(0, 10, 0) logical=(14548905, 4, 46)
Partition 4 does not end on cylinder boundary.
Partition table entries are not in disk order
ubuntu@ubuntu:~$ ^C
ubuntu@ubuntu:~$ clear
ubuntu@ubuntu:~$ sudo parted -l
Model: ATA TOSHIBA MK2555GS (scsi)
Disk /dev/sda: 250GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 106MB 105MB primary ntfs boot
2 106MB 107GB 107GB primary ntfs
3 107GB 241GB 134GB primary fat32
4 241GB 250GB 8833MB primary
Backtrace has 16 calls on stack:
16: /lib/libparted.so.0(ped_assert+0x2a) [0xddcf4a]
15: /lib/libparted.so.0(+0x424b7) [0xe144b7]
14: /lib/libparted.so.0(+0x432c7) [0xe152c7]
13: /lib/libparted.so.0(+0x445bc) [0xe165bc]
12: /lib/libparted.so.0(+0xf7f1) [0xde17f1]
11: /lib/libparted.so.0(ped_disk_add_partition+0x262) [0xde5072]
10: /lib/libparted.so.0(+0x45f53) [0xe17f53]
9: /lib/libparted.so.0(+0x4614f) [0xe1814f]
8: /lib/libparted.so.0(ped_disk_new+0x75) [0xde5e55]
7: parted() [0x804e389]
6: parted() [0x804f553]
5: parted() [0x80517da]
4: parted() [0x8052e51]
3: parted(main+0x2e) [0x8052f5e]
2: /lib/tls/i686/cmov/libc.so.6(__libc_start_main+0xe6) [0x63dbd6]
1: parted() [0x804c3f1]
You found a bug in GNU Parted! Here's what you have to do:
Don't panic! The bug has most likely not affected any of your data.
Help us to fix this bug by doing the following:
Check whether the bug has already been fixed by checking
the last version of GNU Parted that you can find at:
http://ftp.gnu.org/gnu/parted/
Please check this version prior to bug reporting.
If this has not been fixed yet or if you don't know how to check,
please visit the GNU Parted website:
http://www.gnu.org/software/parted
for further information.
Your report should contain the version of this release (2.2)
along with the error message below, the output of
parted DEVICE unit co print unit s print
and the following history of commands you entered.
Also include any additional information about your setup you
consider important.
Assertion (head_size <= 63) at ../../../libparted/labels/dos.c:659 in function
probe_partition_for_geom() failed.
Aborted (core dumped)
To je zatim vse. Az zprovoznim GParted, dam vedet, co to ukazuje.
Diky moc.
-
Nevíš co to tam máš za disk?
Disk /dev/sdc: 130 MB, 130809856 bytes
5 heads, 50 sectors/track, 1021 cylinders
Units = cylinders of 250 * 512 = 128000 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x6f20736b
sda je interní, sdb je ta USB klíčenka, ale ten třetí sdc 130MB? Ten se zdá dělat problémy.
-
To je jen další klíčenka. Měl jsem jí tam připojenou, protože jsem si na ní něco stahoval. Ty potíže jsem ale měl i když tam tahle klíčenka nebyla a byla tam jen ta s instalací + interní HDD
-
Můžeš tady dát tedy výpis z parted -l BEZ toho, že by byla připojena ta malá klíčenka?
-
Tak tady je to bez té klíčenky.
ubuntu@ubuntu:~$ sudo parted -l
Model: ATA TOSHIBA MK2555GS (scsi)
Disk /dev/sda: 250GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 106MB 105MB primary ntfs boot
2 106MB 107GB 107GB primary ntfs
3 107GB 241GB 134GB primary fat32
4 241GB 250GB 8833MB primary
Backtrace has 16 calls on stack:
16: /lib/libparted.so.0(ped_assert+0x2a) [0x8dcf4a]
15: /lib/libparted.so.0(+0x424b7) [0x9144b7]
14: /lib/libparted.so.0(+0x432c7) [0x9152c7]
13: /lib/libparted.so.0(+0x445bc) [0x9165bc]
12: /lib/libparted.so.0(+0xf7f1) [0x8e17f1]
11: /lib/libparted.so.0(ped_disk_add_partition+0x262) [0x8e5072]
10: /lib/libparted.so.0(+0x45f53) [0x917f53]
9: /lib/libparted.so.0(+0x4614f) [0x91814f]
8: /lib/libparted.so.0(ped_disk_new+0x75) [0x8e5e55]
7: parted() [0x804e389]
6: parted() [0x804f553]
5: parted() [0x80517da]
4: parted() [0x8052e51]
3: parted(main+0x2e) [0x8052f5e]
2: /lib/tls/i686/cmov/libc.so.6(__libc_start_main+0xe6) [0x54ebd6]
1: parted() [0x804c3f1]
You found a bug in GNU Parted! Here's what you have to do:
Don't panic! The bug has most likely not affected any of your data.
Help us to fix this bug by doing the following:
Check whether the bug has already been fixed by checking
the last version of GNU Parted that you can find at:
http://ftp.gnu.org/gnu/parted/
Please check this version prior to bug reporting.
If this has not been fixed yet or if you don't know how to check,
please visit the GNU Parted website:
http://www.gnu.org/software/parted
for further information.
Your report should contain the version of this release (2.2)
along with the error message below, the output of
parted DEVICE unit co print unit s print
and the following history of commands you entered.
Also include any additional information about your setup you
consider important.
Assertion (head_size <= 63) at ../../../libparted/labels/dos.c:659 in function
probe_partition_for_geom() failed.
Aborted (core dumped)
A pro jistotu i fdisk:
ubuntu@ubuntu:~$ sudo fdisk -l
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x6583aa7e
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 102400 7 HPFS/NTFS
Partition 1 does not end on cylinder boundary.
/dev/sda2 13 13068 104857600 7 HPFS/NTFS
Partition 2 does not end on cylinder boundary.
/dev/sda3 13068 29328 130611892+ b W95 FAT32
/dev/sda4 29328 30402 8625667+ de Dell Utility
Disk /dev/sdb: 4009 MB, 4009754624 bytes
23 heads, 23 sectors/track, 14804 cylinders
Units = cylinders of 529 * 512 = 270848 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x85d0456f
Device Boot Start End Blocks Id System
/dev/sdb1 * 16 14805 3911744 c W95 FAT32 (LBA)
Díky
-
Podle mě má parted (a potažmo instalátor) problém se zpracováním údajů z klíčenky, kde máš nainstalované Ubuntu. Může to být chyba v programu, nebo chyba na klíčence samotné. Máš tyto možnosti:
* zkusit jinou klíčenku
* zkusit nainstalovat systém na klíčenku jiným způsobem (viz ten návod) nebo ji prostě přeformátovat a přeinstalovat načisto
* zkusit LiveUSB: http://wiki.ubuntu.cz/LiveUSB
-
Tak jsem to zkusil s LiveUSB a pomohlo to. Teď už mám nainstalováno a řeším zprovoznění touchscreenu a touchpadu. Ale to už patří jinam.
Díky.