Fórum Ubuntu CZ/SK
Ubuntu pro osobní počítače => Hardware => Téma založeno: Ujorobot 14 Srpna 2010, 15:08:36
-
Som uplny zaciatocnik v Linuxe. Skusal som ju rozbehat podla navodu vo Wiki,no nepodarilo sa. Moje fungovanie pod Linuxom stoji a pada na rozbehani tejto karty,hlavne dialkoveho ovladania. Ak sa mi to nepodar,budem sa musiet nextiac vratit k Windowsu.
Ubuntu 10.04 sa mi velmi pozdava,nerad byx ho opustil... Takze privitam vase rady a rad sa naucim nieco nove.
Dikes
-
Málo info... veľmi málo
Skusal som ju rozbehat podla navodu vo Wiki,no nepodarilo sa.
Kde bol problém, presne popíš kde, ako, čo... ak sa mi to nepodar,budem sa musiet nextiac vratit k Windowsu.
Nehádž hneď flintu do žita.
Inak, karta by mala pracovať "out of box". Chce to nejaké výpisy , minimálne uname -r
dmesg
lspci
lsmod | grep cx
-
Takze podla navodu http://wiki.ubuntu.cz/Hauppauge%20HVR-1100
som postupoval bez problemov az po RADIO FM. Karta funguje, Tvtime naladil dostupne stanice,no nejde zvuk. To by mi az tak nevadilo,nakolko je prioritou FM Radio a dialkove ovladanie.
Prvy zadrhel nastal pri radiu.
ujorobot@ujorobot-desktop:~$ ln -s /dev/video0 /dev/radio0
ln: vytvára sa symbolický odkaz `/dev/radio0': File exists
ujorobot@ujorobot-desktop:~$ sox -t alsa hw:1,0 -t alsa hw:0,0
sox FAIL formats: can't open input `hw:1,0': snd_pcm_open error: No such file or directory
Dalej som skusil rozbehat dialkove ovladanie http://wiki.ubuntu.cz/D%C3%A1lkov%C3%A9%20ovl%C3%A1d%C3%A1n%C3%AD
ujorobot@ujorobot-desktop:~$ sudo apt-get install lirc
[sudo] password for ujorobot:
Načítavajú sa zoznamy balíkov... Hotovo
Vytvára sa strom závislostí
Načítavajú sa stavové informácie... Hotovo
lirc je už najnovšej verzie.
Nasledovné balíky boli nainštalované automaticky a už viac nie sú potrebné:
libhtml-template-perl mysql-server-core-5.1 mysql-client-core-5.1
mysql-server-5.1 mysql-client-5.1
Na ich odstránenie použite „apt-get autoremove“.
0 aktualizovaných, 0 nových nainštalovaných, 0 na odstránenie a 16 neaktualizovaných.
ujorobot@ujorobot-desktop:~$ sudo service lirc restart
* Stopping remote control daemon(s): LIRC [fail]
* Loading LIRC modules [ OK ]
* Unable to load LIRC kernel modules. Verify your
* selected kernel modules in /etc/lirc/hardware.conf
-
Tu su tie vypisy:
ujorobot@ujorobot-desktop:~$ uname -r
2.6.32-24-generic
ujorobot@ujorobot-desktop:~$ dmesg
[ 0.368770] pci 0000:00:0b.0: IO window: disabled
[ 0.368770] pci 0000:00:0b.0: MEM window: disabled
[ 0.368770] pci 0000:00:0b.0: PREFETCH window: disabled
[ 0.368770] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04
[ 0.368770] pci 0000:00:0c.0: IO window: disabled
[ 0.368770] pci 0000:00:0c.0: MEM window: disabled
[ 0.368770] pci 0000:00:0c.0: PREFETCH window: disabled
[ 0.368770] pci 0000:00:04.0: setting latency timer to 64
[ 0.368770] pci 0000:00:09.0: setting latency timer to 64
[ 0.368770] pci 0000:00:0b.0: setting latency timer to 64
[ 0.368770] pci 0000:00:0c.0: setting latency timer to 64
[ 0.368770] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.368770] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.368770] pci_bus 0000:01: resource 1 mem: [0xdfe00000-0xdfefffff]
[ 0.368770] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.368770] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.368770] pci_bus 0000:02: resource 0 io: [0xe000-0xefff]
[ 0.368770] pci_bus 0000:02: resource 1 mem: [0xdff00000-0xdfffffff]
[ 0.368770] pci_bus 0000:02: resource 2 pref mem [0xc0000000-0xcfffffff]
[ 0.368770] NET: Registered protocol family 2
[ 0.368770] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.368770] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.368770] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.368770] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.368770] TCP reno registered
[ 0.368770] NET: Registered protocol family 1
[ 0.390092] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.390143] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.390205] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.390265] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.390325] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.390391] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.390462] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.390537] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.390554] pci 0000:02:00.0: Boot video device
[ 0.390923] Scanning for low memory corruption every 60 seconds
[ 0.391062] audit: initializing netlink socket (disabled)
[ 0.391075] type=2000 audit(1281979341.390:1): initialized
[ 0.399736] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.401185] VFS: Disk quotas dquot_6.5.2
[ 0.401243] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.401888] fuse init (API version 7.13)
[ 0.401973] msgmni has been set to 4000
[ 0.402243] alg: No test for stdrng (krng)
[ 0.402307] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.402310] io scheduler noop registered
[ 0.402312] io scheduler anticipatory registered
[ 0.402314] io scheduler deadline registered
[ 0.402351] io scheduler cfq registered (default)
[ 0.402520] alloc irq_desc for 24 on node 0
[ 0.402523] alloc kstat_irqs on node 0
[ 0.402533] pcieport 0000:00:09.0: irq 24 for MSI/MSI-X
[ 0.402539] pcieport 0000:00:09.0: setting latency timer to 64
[ 0.402645] alloc irq_desc for 25 on node 0
[ 0.402647] alloc kstat_irqs on node 0
[ 0.402652] pcieport 0000:00:0b.0: irq 25 for MSI/MSI-X
[ 0.402656] pcieport 0000:00:0b.0: setting latency timer to 64
[ 0.402761] alloc irq_desc for 26 on node 0
[ 0.402762] alloc kstat_irqs on node 0
[ 0.402767] pcieport 0000:00:0c.0: irq 26 for MSI/MSI-X
[ 0.402771] pcieport 0000:00:0c.0: setting latency timer to 64
[ 0.402836] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.402861] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.402984] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.402989] ACPI: Power Button [PWRB]
[ 0.403037] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.403039] ACPI: Power Button [PWRF]
[ 0.403370] processor LNXCPU:00: registered as cooling_device0
[ 0.403410] processor LNXCPU:01: registered as cooling_device1
[ 0.408305] Linux agpgart interface v0.103
[ 0.408346] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.408452] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.408552] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.408841] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.409859] brd: module loaded
[ 0.410375] loop: module loaded
[ 0.410480] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.410765] pata_acpi 0000:00:06.0: setting latency timer to 64
[ 0.411209] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[ 0.411215] alloc irq_desc for 23 on node 0
[ 0.411217] alloc kstat_irqs on node 0
[ 0.411228] pata_acpi 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[ 0.411245] pata_acpi 0000:00:08.0: setting latency timer to 64
[ 0.411253] pata_acpi 0000:00:08.0: PCI INT A disabled
[ 0.411583] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22
[ 0.411586] alloc irq_desc for 22 on node 0
[ 0.411587] alloc kstat_irqs on node 0
[ 0.411595] pata_acpi 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 22 (level, low) -> IRQ 22
[ 0.411628] pata_acpi 0000:00:08.1: setting latency timer to 64
[ 0.411635] pata_acpi 0000:00:08.1: PCI INT B disabled
[ 0.412061] Fixed MDIO Bus: probed
[ 0.412101] PPP generic driver version 2.4.2
[ 0.412156] tun: Universal TUN/TAP device driver, 1.6
[ 0.412158] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.412266] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.412624] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 21
[ 0.412627] alloc irq_desc for 21 on node 0
[ 0.412629] alloc kstat_irqs on node 0
[ 0.412637] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21
[ 0.412655] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 0.412658] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 0.412694] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 0.412726] ehci_hcd 0000:00:02.1: debug port 1
[ 0.412734] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 0.412760] ehci_hcd 0000:00:02.1: irq 21, io mem 0xdfdfec00
[ 0.430023] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 0.430113] usb usb1: configuration #1 chosen from 1 choice
[ 0.430142] hub 1-0:1.0: USB hub found
[ 0.430152] hub 1-0:1.0: 10 ports detected
[ 0.430239] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.430579] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20
[ 0.430582] alloc irq_desc for 20 on node 0
[ 0.430583] alloc kstat_irqs on node 0
[ 0.430591] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20
[ 0.430603] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 0.430606] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 0.430647] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 0.430672] ohci_hcd 0000:00:02.0: irq 20, io mem 0xdfdff000
[ 0.492095] usb usb2: configuration #1 chosen from 1 choice
[ 0.492120] hub 2-0:1.0: USB hub found
[ 0.492129] hub 2-0:1.0: 10 ports detected
[ 0.492197] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.492286] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.495179] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.495185] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.495319] mice: PS/2 mouse device common for all mice
[ 0.495440] rtc_cmos 00:02: RTC can wake from S4
[ 0.495493] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.495527] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 0.495665] device-mapper: uevent: version 1.0.3
[ 0.495791] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.495877] device-mapper: multipath: version 1.1.0 loaded
[ 0.495880] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.496055] cpuidle: using governor ladder
[ 0.496058] cpuidle: using governor menu
[ 0.496444] TCP cubic registered
[ 0.496577] NET: Registered protocol family 10
[ 0.497133] lo: Disabled Privacy Extensions
[ 0.497479] NET: Registered protocol family 17
[ 0.497526] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (2 cpu cores) (version 2.20.00)
[ 0.497577] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x9
[ 0.497579] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xb
[ 0.497581] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xd
[ 0.497583] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12
[ 0.497725] PM: Resume from disk failed.
[ 0.497749] registered taskstats version 1
[ 0.498090] Magic number: 6:839:390
[ 0.498202] rtc_cmos 00:02: setting system clock to 2010-08-16 17:22:21 UTC (1281979341)
[ 0.498205] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.498206] EDD information not available.
[ 0.509235] Freeing initrd memory: 8152k freed
[ 0.513741] Freeing unused kernel memory: 880k freed
[ 0.514201] Write protecting the kernel read-only data: 7696k
[ 0.536051] udev: starting version 151
[ 0.659810] Floppy drive(s): fd0 is 1.44M
[ 0.666627] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 0.667008] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
[ 0.667015] forcedeth 0000:00:07.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
[ 0.667019] forcedeth 0000:00:07.0: setting latency timer to 64
[ 0.672474] FDC 0 is a post-1991 82077
[ 0.810020] usb 1-9: new high speed USB device using ehci_hcd and address 3
[ 0.962513] usb 1-9: configuration #1 chosen from 1 choice
[ 0.970461] Initializing USB Mass Storage driver...
[ 0.970646] scsi0 : SCSI emulation for USB Mass Storage devices
[ 0.970806] usbcore: registered new interface driver usb-storage
[ 0.970809] USB Mass Storage support registered.
[ 0.970968] usb-storage: device found at 3
[ 0.970970] usb-storage: waiting for device to settle before scanning
[ 1.191169] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:19:66:71:b3:8e
[ 1.191174] forcedeth 0000:00:07.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
[ 1.191265] pata_amd 0000:00:06.0: version 0.4.1
[ 1.191318] pata_amd 0000:00:06.0: setting latency timer to 64
[ 1.191461] scsi1 : pata_amd
[ 1.191546] scsi2 : pata_amd
[ 1.193501] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.193504] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.193610] sata_nv 0000:00:08.0: version 3.5
[ 1.193620] sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[ 1.193670] sata_nv 0000:00:08.0: setting latency timer to 64
[ 1.193732] scsi3 : sata_nv
[ 1.193804] scsi4 : sata_nv
[ 1.194026] ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 23
[ 1.194029] ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 23
[ 1.194126] sata_nv 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 22 (level, low) -> IRQ 22
[ 1.194161] sata_nv 0000:00:08.1: setting latency timer to 64
[ 1.194224] scsi5 : sata_nv
[ 1.194306] scsi6 : sata_nv
[ 1.194619] ata5: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc000 irq 22
[ 1.194622] ata6: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xc008 irq 22
[ 1.301288] usb 2-4: new low speed USB device using ohci_hcd and address 2
[ 1.370298] ata1.00: ATAPI: TSSTcorp CDDVDW SH-S202H, SB00, max UDMA/66
[ 1.370321] ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:900:0x11)
[ 1.410240] ata1.00: configured for UDMA/66
[ 1.411369] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S202H SB00 PQ: 0 ANSI: 5
[ 1.414818] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.414822] Uniform CD-ROM driver Revision: 3.20
[ 1.414964] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.415039] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 1.415143] ata2: port disabled. ignoring.
[ 1.527139] usb 2-4: configuration #1 chosen from 1 choice
[ 1.530358] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.542561] usbcore: registered new interface driver hiddev
[ 1.548349] input: Device USB Device as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input3
[ 1.548449] generic-usb 0003:05FE:1011.0001: input,hidraw0: USB HID v1.00 Keyboard [Device USB Device] on usb-0000:00:02.0-4/input0
[ 1.558539] input: Device USB Device as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.1/input/input4
[ 1.558627] generic-usb 0003:05FE:1011.0002: input,hidraw1: USB HID v1.00 Mouse [Device USB Device] on usb-0000:00:02.0-4/input1
[ 1.558651] usbcore: registered new interface driver usbhid
[ 1.558654] usbhid: v2.6:USB HID core driver
[ 1.680060] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.700278] ata5.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133
[ 1.700281] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.720280] ata5.00: configured for UDMA/133
[ 1.870358] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.870500] scsi 5:0:0:0: Direct-Access ATA WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5
[ 1.870675] sd 5:0:0:0: Attached scsi generic sg1 type 0
[ 1.870696] sd 5:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.870763] sd 5:0:0:0: [sda] Write Protect is off
[ 1.870766] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.870793] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.871016] sda: sda1 sda2 sda3 sda4
[ 1.902401] sd 5:0:0:0: [sda] Attached SCSI disk
[ 2.210356] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.609014] EXT4-fs (sda2): mounted filesystem with ordered data mode
[ 3.585614] Adding 4192956k swap on /dev/sda3. Priority:-1 extents:1 across:4192956k
[ 3.927012] udev: starting version 151
[ 4.576146] type=1505 audit(1281972145.571:2): operation="profile_load" pid=482 name="/sbin/dhclient3"
[ 4.576407] type=1505 audit(1281972145.571:3): operation="profile_load" pid=482 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 4.576555] type=1505 audit(1281972145.571:4): operation="profile_load" pid=482 name="/usr/lib/connman/scripts/dhclient-script"
[ 5.093213] i2c i2c-0: nForce2 SMBus adapter at 0x5000
[ 5.093305] i2c i2c-1: nForce2 SMBus adapter at 0x6000
[ 5.110573] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 5.175447] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.194248] EDAC MC: Ver: 2.1.0 Jul 28 2010
[ 5.225805] parport_pc 00:07: reported by Plug and Play ACPI
[ 5.225863] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 5.240943] Linux video capture interface: v2.00
[ 5.267505] EDAC amd64_edac: Ver: 3.2.0 Jul 28 2010
[ 5.267620] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[ 5.267630] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 5.267632] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 5.267633] (Note that use of the override may cause unknown side effects.)
[ 5.267655] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 5.269954] ppdev: user-space parallel port driver
[ 5.285447] lp: driver loaded but no devices found
[ 5.295340] vga16fb: initializing
[ 5.295345] vga16fb: mapped to 0xffff8800000a0000
[ 5.295438] fb0: VGA16 VGA frame buffer device
[ 5.300247] lp0: using parport0 (interrupt-driven).
[ 5.571648] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 5.571654] Disabling lock debugging due to kernel taint
[ 5.637992] [fglrx] Maximum main memory to use for locked dma buffers: 1882 MBytes.
[ 5.638116] [fglrx] vendor: 1002 device: 9589 count: 1
[ 5.638422] [fglrx] ioport: bar 4, base 0xe000, size: 0x100
[ 5.638806] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 19
[ 5.638811] alloc irq_desc for 19 on node 0
[ 5.638813] alloc kstat_irqs on node 0
[ 5.638825] pci 0000:02:00.0: PCI INT A -> Link[LNED] -> GSI 19 (level, low) -> IRQ 19
[ 5.638831] pci 0000:02:00.0: setting latency timer to 64
[ 5.639061] [fglrx] Kernel PAT support is enabled
[ 5.639091] [fglrx] module loaded - fglrx 8.72.11 [Apr 8 2010] with 1 minors
[ 5.650089] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 5.651874] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 5.651880] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 5.651882] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 5.712379] saa7130/34: v4l2 driver version 0.2.15 loaded
[ 5.717145] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 18
[ 5.717153] alloc irq_desc for 18 on node 0
[ 5.717156] alloc kstat_irqs on node 0
[ 5.717169] saa7134 0000:01:08.0: PCI INT A -> Link[LNKA] -> GSI 18 (level, low) -> IRQ 18
[ 5.717176] saa7133[0]: found at 0000:01:08.0, rev: 209, irq: 18, latency: 32, mmio: 0xdfeff800
[ 5.717183] saa7133[0]: subsystem: 0070:6701, board: Hauppauge WinTV-HVR1110 DVB-T/Hybrid [card=104,autodetected]
[ 5.717210] saa7133[0]: board init: gpio is 6400000
[ 5.717221] IRQ 18/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 5.937830] Console: switching to colour frame buffer device 80x30
[ 5.950071] saa7133[0]: i2c eeprom 00: 70 00 01 67 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[ 5.950081] saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff ff ff ff ff ff ff
[ 5.950089] saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 33 88 ff 00 aa ff ff ff ff
[ 5.950097] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5.950104] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 60 ff ff ff ff ff ff
[ 5.950111] saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5.950119] saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5.950126] saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5.950133] saa7133[0]: i2c eeprom 80: 84 09 00 04 20 77 00 40 3a f8 38 f0 73 05 29 00
[ 5.950141] saa7133[0]: i2c eeprom 90: 84 08 00 06 cb 05 01 00 94 48 89 72 07 70 73 09
[ 5.950148] saa7133[0]: i2c eeprom a0: 23 5f 73 0a fc 72 72 0b 2f 72 0e 01 72 0f 03 72
[ 5.950156] saa7133[0]: i2c eeprom b0: 10 01 72 11 ff 79 d4 00 00 00 00 00 00 00 00 00
[ 5.950163] saa7133[0]: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5.950170] saa7133[0]: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5.950177] saa7133[0]: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5.950185] saa7133[0]: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5.950195] i2c i2c-2: Invalid 7-bit address 0x7a
[ 5.970126] tveeprom 2-0050: Hauppauge model 67019, rev B4B4, serial# 3733562
[ 5.970131] tveeprom 2-0050: MAC address is 00-0D-FE-38-F8-3A
[ 5.970134] tveeprom 2-0050: tuner model is Philips 8275A (idx 114, type 4)
[ 5.970137] tveeprom 2-0050: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc)
[ 5.970140] tveeprom 2-0050: audio processor is SAA7131 (idx 41)
[ 5.970143] tveeprom 2-0050: decoder processor is SAA7131 (idx 35)
[ 5.970145] tveeprom 2-0050: has radio, has IR receiver, has IR transmitter
[ 5.970147] saa7133[0]: hauppauge eeprom: model=67019
[ 5.971481] usb-storage: device scan complete
[ 5.972068] scsi 0:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 5.972556] scsi 0:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 5.973178] scsi 0:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 5.973677] scsi 0:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 5.974591] sd 0:0:0:0: Attached scsi generic sg2 type 0
[ 5.977044] sd 0:0:0:1: Attached scsi generic sg3 type 0
[ 5.977883] sd 0:0:0:2: Attached scsi generic sg4 type 0
[ 5.979049] sd 0:0:0:3: Attached scsi generic sg5 type 0
[ 5.983007] sd 0:0:0:1: [sdc] Attached SCSI removable disk
[ 5.985699] sd 0:0:0:2: [sdd] Attached SCSI removable disk
[ 5.988341] sd 0:0:0:0: [sdb] Attached SCSI removable disk
[ 5.989143] sd 0:0:0:3: [sde] Attached SCSI removable disk
[ 6.118123] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[ 6.118131] HDA Intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
[ 6.118136] hda_intel: Disable MSI for Nvidia chipset
[ 6.118163] HDA Intel 0000:00:05.0: setting latency timer to 64
[ 6.680152] tuner 2-004b: chip found @ 0x96 (saa7133[0])
[ 6.850018] tda829x 2-004b: setting tuner address to 61
[ 6.899246] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 7.160046] tda829x 2-004b: type set to tda8290+75a
[ 7.540032] hda_codec: ALC662 rev1: BIOS auto-probing.
[ 8.160122] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:05.0/input/input5
[ 8.413946] EXT4-fs (sda4): mounted filesystem with ordered data mode
[ 8.746707] ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 17
[ 8.746715] alloc irq_desc for 17 on node 0
[ 8.746718] alloc kstat_irqs on node 0
[ 8.746730] HDA Intel 0000:02:00.1: PCI INT B -> Link[LNEA] -> GSI 17 (level, low) -> IRQ 17
[ 8.746781] HDA Intel 0000:02:00.1: setting latency timer to 64
[ 10.072141] type=1505 audit(1281972151.071:5): operation="profile_load" pid=1068 name="/usr/share/gdm/guest-session/Xsession"
[ 10.074179] type=1505 audit(1281972151.071:6): operation="profile_replace" pid=1071 name="/sbin/dhclient3"
[ 10.074453] type=1505 audit(1281972151.071:7): operation="profile_replace" pid=1071 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 10.074606] type=1505 audit(1281972151.071:8): operation="profile_replace" pid=1071 name="/usr/lib/connman/scripts/dhclient-script"
[ 10.192204] type=1505 audit(1281972151.191:9): operation="profile_load" pid=1072 name="/usr/bin/evince"
[ 10.195606] type=1505 audit(1281972151.191:10): operation="profile_load" pid=1072 name="/usr/bin/evince-previewer"
[ 10.197753] type=1505 audit(1281972151.191:11): operation="profile_load" pid=1072 name="/usr/bin/evince-thumbnailer"
[ 10.354120] type=1505 audit(1281972151.351:12): operation="profile_load" pid=1077 name="/usr/lib/cups/backend/cups-pdf"
[ 10.354455] type=1505 audit(1281972151.351:13): operation="profile_load" pid=1077 name="/usr/sbin/cupsd"
[ 10.416579] type=1505 audit(1281972151.411:14): operation="profile_load" pid=1078 name="/usr/sbin/mysqld"
[ 10.659069] alloc irq_desc for 27 on node 0
[ 10.659073] alloc kstat_irqs on node 0
[ 10.659084] forcedeth 0000:00:07.0: irq 27 for MSI/MSI-X
[ 10.659276] eth0: no link during initialization.
[ 10.659940] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.987834] alloc irq_desc for 28 on node 0
[ 11.987839] alloc kstat_irqs on node 0
[ 11.987852] fglrx_pci 0000:02:00.0: irq 28 for MSI/MSI-X
[ 11.988753] [fglrx] Firegl kernel thread PID: 1236
[ 11.988962] [fglrx] IRQ 28 Enabled
[ 12.639863] lirc_dev: IR Remote Control driver registered, major 61
[ 12.937135] input: i2c IR (HVR 1110) as /devices/virtual/input/input6
[ 12.937342] ir-kbd-i2c: i2c IR (HVR 1110) detected at i2c-2/2-0071/ir0 [saa7133[0]]
[ 13.080124] saa7133[0]: registered device video0 [v4l2]
[ 13.080157] saa7133[0]: registered device vbi0
[ 13.080193] saa7133[0]: registered device radio0
[ 13.218164] dvb_init() allocating 1 frontend
[ 13.253482] saa7134 ALSA driver for DMA sound loaded
[ 13.253502] IRQ 18/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 13.253533] saa7133[0]/alsa: saa7133[0] at 0xdfeff800 irq 18 registered as card -2
[ 13.450113] DVB: registering new adapter (saa7133[0])
[ 13.450121] DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
[ 13.630064] tda1004x: setting up plls for 48MHz sampling clock
[ 13.782196] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 13.782202] vboxdrv: Successfully done.
[ 13.782204] vboxdrv: Found 2 processor cores.
[ 13.782816] VBoxDrv: dbg - g_abExecMemory=ffffffffa05d6ca0
[ 13.782834] vboxdrv: fAsync=1 offMin=0x3b906d offMax=0x3b906d
[ 13.783474] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
[ 13.783478] vboxdrv: Successfully loaded version 3.2.8 (interface 0x00140001).
[ 14.486454] [fglrx] Gart USWC size:626 M.
[ 14.486459] [fglrx] Gart cacheable size:247 M.
[ 14.486465] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 14.486468] [fglrx] Reserved FB block: Unshared offset:fe07000, size:1f9000
[ 14.486471] [fglrx] Reserved FB block: Unshared offset:1fffc000, size:4000
[ 16.100019] tda1004x: timeout waiting for DSP ready
[ 16.200023] tda1004x: found firmware revision 0 -- invalid
[ 16.200027] tda1004x: trying to boot from eeprom
[ 17.261001] CPU0 attaching NULL sched-domain.
[ 17.261010] CPU1 attaching NULL sched-domain.
[ 17.320125] CPU0 attaching sched-domain:
[ 17.320131] domain 0: span 0-1 level MC
[ 17.320134] groups: 0 1
[ 17.320140] CPU1 attaching sched-domain:
[ 17.320142] domain 0: span 0-1 level MC
[ 17.320144] groups: 1 0
[ 18.590020] tda1004x: timeout waiting for DSP ready
[ 18.619652] eth0: link up.
[ 18.620636] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 18.690023] tda1004x: found firmware revision 0 -- invalid
[ 18.690028] tda1004x: waiting for firmware upload...
[ 18.690033] saa7134 0000:01:08.0: firmware: requesting dvb-fe-tda10046.fw
[ 18.833578] saa7134 0000:01:08.0: firmware: requesting dvb-fe-tda10045.fw
[ 18.836310] tda1004x: no firmware upload (timeout or file not found?)
[ 18.836316] tda1004x: firmware upload failed
[ 19.481468] eth0: link down.
[ 21.343549] eth0: link up.
[ 21.847035] CPU0 attaching NULL sched-domain.
[ 21.847044] CPU1 attaching NULL sched-domain.
[ 21.910424] CPU0 attaching sched-domain:
[ 21.910429] domain 0: span 0-1 level MC
[ 21.910432] groups: 0 1
[ 21.910438] CPU1 attaching sched-domain:
[ 21.910440] domain 0: span 0-1 level MC
[ 21.910442] groups: 1 0
[ 22.035697] eth0: link down.
[ 28.840017] eth0: no IPv6 routers present
[ 34.112757] eth0: link up.
[ 37.536789] eth0: link down.
[ 78.300025] Clocksource tsc unstable (delta = -270919900 ns)
[ 145.143565] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 188.050038] usb 1-3: new high speed USB device using ehci_hcd and address 4
[ 188.214222] usb 1-3: configuration #1 chosen from 1 choice
[ 188.460773] cdc_acm 1-3:1.1: ttyACM0: USB ACM device
[ 188.468562] cdc_wdm 1-3:1.7: cdc-wdm0: USB WDM device
[ 188.468605] usbcore: registered new interface driver cdc_wdm
[ 188.469665] cdc_acm 1-3:1.3: ttyACM1: USB ACM device
[ 188.474747] usbcore: registered new interface driver cdc_ether
[ 188.484482] usbcore: registered new interface driver cdc_acm
[ 188.484491] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 188.487375] usb 1-3: unsupported MDLM descriptors
[ 188.488994] usbcore: registered new interface driver zaurus
[ 245.728605] PPP BSD Compression module registered
[ 245.736606] PPP Deflate Compression module registered
ujorobot@ujorobot-desktop:~$ lspci
00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1)
00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2)
00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3)
00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3)
00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1)
00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2)
00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2)
00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2)
00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2)
00:08.1 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2)
00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:08.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1)
02:00.0 VGA compatible controller: ATI Technologies Inc RV630 [Radeon HD 2600 Series]
02:00.1 Audio device: ATI Technologies Inc RV630/M76 audio device [Radeon HD 2600 Series]
ujorobot@ujorobot-desktop:~$ lsmod
Module Size Used by
ppp_deflate 4426 0
zlib_deflate 21834 1 ppp_deflate
bsd_comp 5283 0
ppp_async 8174 1
crc_ccitt 1675 1 ppp_async
zaurus 3284 0
cdc_ether 4309 1 zaurus
cdc_wdm 10114 0
cdc_acm 16546 3
usbnet 18052 2 zaurus,cdc_ether
mii 5237 1 usbnet
binfmt_misc 7960 1
vboxnetadp 5171 0
vboxnetflt 14998 0
vboxdrv 1792472 2 vboxnetadp,vboxnetflt
tda1004x 16962 1
saa7134_alsa 12370 1
saa7134_dvb 26179 0
videobuf_dvb 6203 1 saa7134_dvb
dvb_core 102993 1 videobuf_dvb
ir_kbd_i2c 6703 0
lirc_dev 11302 0
snd_hda_codec_atihdmi 3023 1
iptable_nat 5219 0
iptable_mangle 3315 0
ipt_REJECT 2384 0
ipt_LOG 5370 0
xt_limit 2180 0
xt_tcpudp 2667 0
ipt_addrtype 2151 0
xt_state 1490 0
snd_hda_codec_realtek 279040 1
tda827x 10532 2
ip6table_filter 2887 1
ip6_tables 19618 1 ip6table_filter
nf_nat_irc 1577 0
tda8290 14720 1
tuner 23256 1
nf_conntrack_irc 4429 1 nf_nat_irc
snd_hda_intel 25677 3
nf_nat_ftp 2513 0
snd_hda_codec 85759 3 snd_hda_codec_atihdmi,snd_hda_codec_realtek,snd_hda_intel
nf_nat 19501 3 iptable_nat,nf_nat_irc,nf_nat_ftp
nf_conntrack_ipv4 12980 3 iptable_nat,nf_nat
snd_hwdep 6924 1 snd_hda_codec
nf_defrag_ipv4 1481 1 nf_conntrack_ipv4
fbcon 39270 71
tileblit 2487 1 fbcon
snd_pcm_oss 41394 0
snd_mixer_oss 16299 2 snd_pcm_oss
nf_conntrack_ftp 7126 1 nf_nat_ftp
font 8053 1 fbcon
snd_pcm 87882 4 saa7134_alsa,snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy 1782 0
snd_seq_oss 31219 0
snd_seq_midi 5829 0
bitblit 5811 1 fbcon
saa7134 166706 3 saa7134_alsa,saa7134_dvb
snd_rawmidi 23420 1 snd_seq_midi
nf_conntrack 73966 8 iptable_nat,xt_state,nf_nat_irc,nf_conntrack_irc,nf_nat_ftp,nf_nat,nf_conntrack_ipv4,nf_conntrack_ftp
softcursor 1565 1 bitblit
fglrx 2353422 33
snd_seq_midi_event 7267 2 snd_seq_oss,snd_seq_midi
vga16fb 12757 1
iptable_filter 2791 0
lp 9336 0
ppdev 6375 0
ir_common 43415 2 ir_kbd_i2c,saa7134
v4l2_common 18357 2 tuner,saa7134
videodev 40518 4 tuner,saa7134,v4l2_common
v4l1_compat 15495 1 videodev
v4l2_compat_ioctl32 12020 1 videodev
videobuf_dma_sg 12370 3 saa7134_alsa,saa7134_dvb,saa7134
snd_seq 57481 7 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
parport_pc 29958 1
vgastate 9857 1 vga16fb
snd_timer 23649 2 snd_pcm,snd_seq
edac_core 45423 0
edac_mce_amd 9278 0
ip_tables 18390 3 iptable_nat,iptable_mangle,iptable_filter
snd_seq_device 6888 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
x_tables 22461 9 iptable_nat,ipt_REJECT,ipt_LOG,xt_limit,xt_tcpudp,ipt_addrtype,xt_state,ip6_tables,ip_tables
videobuf_core 19301 3 videobuf_dvb,saa7134,videobuf_dma_sg
tveeprom 13882 1 saa7134
k8temp 3912 0
i2c_nforce2 6099 0
parport 37160 3 lp,ppdev,parport_pc
snd 71106 20 saa7134_alsa,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 8052 2 snd
snd_page_alloc 8500 2 snd_hda_intel,snd_pcm
psmouse 64576 0
serio_raw 4918 0
usbhid 41084 0
hid 83440 1 usbhid
usb_storage 49833 0
floppy 63156 0
forcedeth 55592 0
sata_nv 23778 3
pata_amd 11962 0
-
[ 18.690033] saa7134 0000:01:08.0: firmware: requesting dvb-fe-tda10046.fw
[ 18.833578] saa7134 0000:01:08.0: firmware: requesting dvb-fe-tda10045.fw
[ 18.836310] tda1004x: no firmware upload (timeout or file not found?)
[ 18.836316] tda1004x: firmware upload failed
podľa všetkého ti chýba firmware dvb-fe-tda10046.fw
dvb-fe-tda10045.fwtakže urob nasledovnésudo apt-get install linux-firmware-nonfree inak tam nevidím žiadny problém
dalej tvoja karta je nie TV karta HAUPPAUGE WinTV HVR 1100 ,ale saa7133[0]: subsystem: 0070:6701, board: Hauppauge WinTV-HVR1110 DVB-T/Hybrid [card=104,autodetected]
[ 5.717210] saa7133[0]: board init: gpio is 6400000
s tým sox, najprv si zisti zberacie zariadenia arecord -l
a podľa toho hw:x,x -t alsa hw:x,xale , asi jednoduchšie je proste prepojiť vystup zvuku z tv karty do pc káblikom. S tym diaľkovým ti neporadím, ale pozri sa do /etc/lirc/hardware.conf
a pošli to sem, inak google ...
-
# /etc/lirc/hardware.conf
#
#Chosen Remote Control
REMOTE="Hauppauge HVR-1100"
REMOTE_MODULES=""
REMOTE_DRIVER="devinput"
REMOTE_DEVICE="name=i2c\?IR\?\(HVR\?1110\)"
REMOTE_SOCKET=""
REMOTE_LIRCD_CONF=""
REMOTE_LIRCD_ARGS=""
#Chosen IR Transmitter
TRANSMITTER="Command IR : Direct TV Receiver"
TRANSMITTER_MODULES="lirc_dev lirc_cmdir"
TRANSMITTER_DRIVER=""
TRANSMITTER_DEVICE="/dev/lirc1"
TRANSMITTER_SOCKET=""
TRANSMITTER_LIRCD_CONF="directtv/general.conf"
TRANSMITTER_LIRCD_ARGS=""
#Enable lircd
START_LIRCD=true
#Don't start lircmd even if there seems to be a good config file
#START_LIRCMD="false"
#Try to load appropriate kernel modules
LOAD_MODULES="true"
# Default configuration files for your hardware if any
LIRCMD_CONF=""
#Forcing noninteractive reconfiguration
#If lirc is to be reconfigured by an external application
#that doesn't have a debconf frontend available, the noninteractive
#frontend can be invoked and set to parse REMOTE and TRANSMITTER
#It will then populate all other variables without any user input
#If you would like to configure lirc via standard methods, be sure
#to leave this set to "false"
FORCE_NONINTERACTIVE_RECONFIGURATION="false"
START_LIRCMD=""
# Receiver settings required by gnome-lirc-properties
RECEIVER_MODEL="i2c\ IR\ \(HVR\ 1110\)"
RECEIVER_VENDOR="Linux\ Input\ Device"
# Remote settings required by gnome-lirc-properties
REMOTE_MODEL="Linux\ Input\ Layer\ compatible\ Remote"
REMOTE_VENDOR="Generic"
-
Mozes ozrejmit to prepojenie kablikom? Zvonka su zasuvky: TV, FM , Chinch , S Video , 3.5mm jack line IN , IR
Sorry,fakt som zaciatocnik. Kamos ma ukecal na Ubuntu,ze mi stym pomoze,no musel odcestovat dlhodobo. Tak mam teraz uplne novy stroj ktory sa xcem a musim naucit ovladat :)
-
Takze vdaka googlu uz dialkove funguje. Pravdepodobne medzi sebou kolidovali rozne nastavenia zabezpecene programami vyuzivajucimi LIRC,ktore som skusal. Odstranil som vsetko co suvisi s LIRC a pouceny skusenostami nanovo LIRC nainstaloval. Bezia sice len zakladne ovladacie funkcie,no zatial mi to postacuje. Stym zvukom z karty si stale neviem poradit...