Fórum Ubuntu CZ/SK
Ubuntu pro osobní počítače => Obecná podpora => Téma založeno: Übermensch 14 Září 2010, 20:50:19
-
Nedávno jsem aktualizoval systém a stáhlo mi to novou verzi jádra. Instalace se však nezdařila a od té doby mi to vyhazuje chybovou hlášku při instalaci nového softwaru.
(http://vydrus.ic.cz/b/chyba127.png)
Dneska jsem se rozhodl inkriminované balíčky přeinstalovat... a zase to nešlo.
(Čtu databázi ... nyní je nainstalováno 187777 souborů a adresářů.)
Připravuji nahrazení linux-generic 2.6.32.24.25 (pomocí .../linux-generic_2.6.32.24.25_amd64.deb) ...
Rozbaluji náhradu linux-generic ...
Připravuji nahrazení linux-headers-2.6.32-24-generic 2.6.32-24.42 (pomocí .../linux-headers-2.6.32-24-generic_2.6.32-24.42_amd64.deb) ...
Rozbaluji náhradu linux-headers-2.6.32-24-generic ...
Připravuji nahrazení linux-headers-generic 2.6.32.24.25 (pomocí .../linux-headers-generic_2.6.32.24.25_amd64.deb) ...
Rozbaluji náhradu linux-headers-generic ...
Připravuji nahrazení linux-image-generic 2.6.32.24.25 (pomocí .../linux-image-generic_2.6.32.24.25_amd64.deb) ...
Rozbaluji náhradu linux-image-generic ...
Nastavuji balík linux-image-2.6.32-24-generic (2.6.32-24.42) ...
Running depmod.
update-initramfs: Generating /boot/initrd.img-2.6.32-24-generic
Not updating initrd symbolic links since we are being updated/reinstalled
(2.6.32-24.41 was configured last, according to dpkg)
Not updating image symbolic links since we are being updated/reinstalled
(2.6.32-24.41 was configured last, according to dpkg)
Running postinst hook script /usr/sbin/update-grub.
/etc/default/grub: 10: i915.powersave=0: not found
User postinst hook script [/usr/sbin/update-grub] exited with value 127
dpkg: chyba při zpracovávání linux-image-2.6.32-24-generic (--configure):
podproces instalovaný post-installation skript vrátil chybový status 127
Nastavuji balík linux-headers-2.6.32-24-generic (2.6.32-24.42) ...
Examining /etc/kernel/header_postinst.d.
run-parts: executing /etc/kernel/header_postinst.d/dkms 2.6.32-24-generic /boot/vmlinuz-2.6.32-24-generic
run-parts: executing /etc/kernel/header_postinst.d/nvidia-common 2.6.32-24-generic /boot/vmlinuz-2.6.32-24-generic
Nastavuji balík linux-headers-generic (2.6.32.24.25) ...
dpkg: nesplněné závislosti zamezily konfiguraci balíku linux-image-generic:
linux-image-generic závisí na linux-image-2.6.32-24-generic; avšak:
Balík linux-image-2.6.32-24-generic zatím není zkonfigurován.
dpkg: chyba při zpracovávání linux-image-generic (--configure):
problém se závislostmi - nechávám nezkonfigurované
dpkg: nesplněné závislosti zamezily konfiguraci balíku linux-generic:
linux-generic závisí na linux-image-generic (= 2.6.32.24.25); avšak:
Balík linux-image-generic zatím není zkonfigurován.
dpkg: chyba při zpracovávání linux-generic (--configure):
problém se závislostmi - nechávám nezkonfigurované
No apport report written because the error message indicates its a followup error from a previous failure.
No apport report written because the error message indicates its a followup error from a previous failure.
Při zpracování nastaly chyby:
linux-image-2.6.32-24-generic
linux-image-generic
linux-generic
E: Sub-process /usr/bin/dpkg returned an error code (1)
Instalace balíku selhala. Probíhá pokus o zotavení:
Nastavuji balík linux-image-2.6.32-24-generic (2.6.32-24.42) ...
Running depmod.
update-initramfs: Generating /boot/initrd.img-2.6.32-24-generic
Not updating initrd symbolic links since we are being updated/reinstalled
(2.6.32-24.41 was configured last, according to dpkg)
Not updating image symbolic links since we are being updated/reinstalled
(2.6.32-24.41 was configured last, according to dpkg)
Running postinst hook script /usr/sbin/update-grub.
/etc/default/grub: 10: i915.powersave=0: not found
User postinst hook script [/usr/sbin/update-grub] exited with value 127
dpkg: chyba při zpracovávání linux-image-2.6.32-24-generic (--configure):
podproces instalovaný post-installation skript vrátil chybový status 127
dpkg: nesplněné závislosti zamezily konfiguraci balíku linux-image-generic:
linux-image-generic závisí na linux-image-2.6.32-24-generic; avšak:
Balík linux-image-2.6.32-24-generic zatím není zkonfigurován.
dpkg: chyba při zpracovávání linux-image-generic (--configure):
problém se závislostmi - nechávám nezkonfigurované
dpkg: nesplněné závislosti zamezily konfiguraci balíku linux-generic:
linux-generic závisí na linux-image-generic (= 2.6.32.24.25); avšak:
Balík linux-image-generic zatím není zkonfigurován.
dpkg: chyba při zpracovávání linux-generic (--configure):
problém se závislostmi - nechávám nezkonfigurované
Při zpracování nastaly chyby:
linux-image-2.6.32-24-generic
linux-image-generic
linux-generic
Ví někdo, co s tím?
Dík.
-
Dáš tady obsah souboru /etc/default/grub?
cat /etc/default/grub
-
Tady to je:
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
i915.powersave=0
GRUB_CMDLINE_LINUX=""
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_LINUX_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
-
i915.powersave=0
Co to je?!
-
Mám inteláckou grafickou kartu, která mi způsobovala občasné blikání spodní části obrazovky. Tohle mi někdo poradil (a funguje to).
-
Nevím, tady v tom vlákně píšeš, že ti to nefunguje...
http://forum.ubuntu.cz/index.php/topic,49311
?Můžeš tu ještě dátcat /boot/grub/grub.cfg
-
Teď už to z nějakého důvodu nezlobí. :)
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set c69e7b68-65e3-409f-8dd3-42a3ea5085de
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set c69e7b68-65e3-409f-8dd3-42a3ea5085de
set locale_dir=($root)/boot/grub/locale
set lang=cs
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.32-24-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set c69e7b68-65e3-409f-8dd3-42a3ea5085de
linux /boot/vmlinuz-2.6.32-24-generic root=UUID=c69e7b68-65e3-409f-8dd3-42a3ea5085de ro quiet splash
initrd /boot/initrd.img-2.6.32-24-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set c69e7b68-65e3-409f-8dd3-42a3ea5085de
echo 'Loading Linux 2.6.32-24-generic ...'
linux /boot/vmlinuz-2.6.32-24-generic root=UUID=c69e7b68-65e3-409f-8dd3-42a3ea5085de ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-24-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-21-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set c69e7b68-65e3-409f-8dd3-42a3ea5085de
linux /boot/vmlinuz-2.6.32-21-generic root=UUID=c69e7b68-65e3-409f-8dd3-42a3ea5085de ro quiet splash
initrd /boot/initrd.img-2.6.32-21-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-21-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set c69e7b68-65e3-409f-8dd3-42a3ea5085de
echo 'Loading Linux 2.6.32-21-generic ...'
linux /boot/vmlinuz-2.6.32-21-generic root=UUID=c69e7b68-65e3-409f-8dd3-42a3ea5085de ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-21-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set c69e7b68-65e3-409f-8dd3-42a3ea5085de
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set c69e7b68-65e3-409f-8dd3-42a3ea5085de
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
if [ ${timeout} != -1 ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
-
Z toho výpisu vidím, že ti je ten parametr k ničemu (není použit), takže ten řádek
i915.powersave=0můžeš klidně ze souboru /etc/default/grub vymazat. Pak by měla aktualizace jet.
-
Máš recht, díky.
Nicméně v tom případě nechápu, proč mi nebliká dispej. To jsem z toho jelen...
-
Uvěř, a budeš spasen. ;D