Fórum Ubuntu CZ/SK
Ostatní => Archiv => Téma založeno: 626rs 18 Října 2010, 12:49:43
-
Poslední dobou se mi stává že najednou vylítne zničeho nic zátěž procesoru na 98% aniž by se něco s PC dělalo, a nechce klesnout i několik minut. Když pak jako root spustím TOP tak vidím že viníkem je proces apt-get který žere celý výkon procesoru. Dokud jej přes příkazový řádek nezabiju, je schopen konzumovat procesor libovolně dlouhou dobu. Nenapadá někoho proč se toto děje? Ubuntu 10.10
-
Můžeš tady dát snímek obrazovky (http://wiki.ubuntu.cz/Z%C3%ADsk%C3%A1n%C3%AD%20sn%C3%ADmku%20obrazovky) z toho topu?
-
Můžeš tady dát snímek obrazovky (http://wiki.ubuntu.cz/Z%C3%ADsk%C3%A1n%C3%AD%20sn%C3%ADmku%20obrazovky) z toho topu?
Ok, až se mi to zase stane, hodim ho sem.
-
Screen je tu
http://img259.imageshack.us/img259/3838/screenkc.png
-
Tak to bude těžké, protože budeme muset zase čekat, až to nastane... >:(
Napadá tě nějaká věc, která by mohla vést k jeho spuštění? Automatická aktualizace? Nepovedená instalace? Proces je s nice hodnotou 10, což vypadá na nějakou práci na pozadí...
Zkus se v příp. problémů podívat do výpisu pstree a zjistit, který proces ten apt-get spustil. A ten apt-get nezabíjej, ať ho můžem zkoumat :) (s nice 10 by zpomalovat nic neměl).
-
Právě že mě nenapadá nic co by to mohlo spouštět ale zkusím to schválně sledovat.
-
Tohle mi dělal jeden balík pro Mono (myslím že Nunit). Při instalaci volal něco z libc, co nedělalo, co mělo a zkoušel to pořád. Šlo to dosti blbě sestřelit.
Balík byl vždy označen jako problémový a nešel ani odinstalovat ani doinstalovat.
-
parametry má - apt-get -qq -y update
Jinak apt-get log ve var/tmp má po chvilce kolem 70 MB a je plný:
read(0, "", 1) = 0
read(0, "", 1) = 0
read(0, "", 1) = 0
read(0, "", 1) = 0
read(0, "", 1) = 0
-
Zjistils' toho rodiče? ("který proces ten apt-get spustil")
-
ne, když zkusím ten příkaz tak mi napíše - ERROR: Process ID list syntax error.
Bohužel nejsem zase tak zdatnej linuxák :(
Nicméně jsem si nainstaloval nějaký process monitor ze kterého bych měl zjistit PPID procesu, PPID by mělo být číslo procesu rodiče ne? Mohu, pokud vím ppid nějak zjistit jakému procesu ppid patří?
-
Mně osobně vyhovuje zmíněný pstree, tam je to vidět názorně, např.
├─gdm-binary─┬─gdm-simple-slav─┬─Xorg
│ │ ├─gdm-session-wor─┬─gnome-session─┬─applet.py
│ │ │ │ ├─compiz─┬─sh───gtk-window-deco───{gtk-window-dec}
│ │ │ │ │ ├─sh───gnome-terminal─┬─bash───pstree
│ │ │ │ │ │ ├─gnome-pty-helpe
│ │ │ │ │ │ └─3*[{gnome-terminal}]
│ │ │ │ │ └─{compiz}
│ │ │ │ ├─gnome-panel───{gnome-panel}
│ │ │ │ ├─gnome-power-man───{gnome-power-ma}
│ │ │ │ ├─kupfer
│ │ │ │ ├─my_cron_───my_cron─┬─sleep
│ │ │ │ │ └─zalohuj───zalohuj───sendEmail
│ │ │ │ ├─nautilus───{nautilus}
│ │ │ │ ├─polkit-gnome-au
│ │ │ │ └─2*[{gnome-session}]
│ │ │ └─{gdm-session-wo}
│ │ └─{gdm-simple-sla}
│ ├─gdm-simple-slav─┬─Xorg
│ │ ├─gdm-session-wor─┬─gnome-session─┬─applet.py
│ │ │ │ ├─gnome-panel───{gnome-panel}
│ │ │ │ ├─gnome-power-man───{gnome-power-ma}
│ │ │ │ ├─metacity───{metacity}
│ │ │ │ ├─nautilus───{nautilus}
│ │ │ │ ├─polkit-gnome-au
│ │ │ │ └─2*[{gnome-session}]
│ │ │ └─{gdm-session-wo}
│ │ └─{gdm-simple-sla}
│ └─{gdm-binary}
Všechny informace jsou ale vidět i v Sledování systému (http://wiki.ubuntu.cz/Sledov%C3%A1n%C3%AD%20syst%C3%A9mu), pokud zmáčkneš Ctrl+d, jsou vidět i závislosti (rodič - potomek).
-
ok, zkusím ten pstree a dohledám toho rodiče a pak jsem hodím výsledek + třeba screen toho pstree
-
Tu je Výpis pstre
patrně tedy půjde o ├─anacron───sh───run-parts───apt───apt-get─┬─bzip2 ale nic mi to neříká :(
root@jirka-book:~# pstree
init─┬─NetworkManager─┬─dhclient
│ └─{NetworkManager}
├─acpid
├─anacron───sh───run-parts───apt───apt-get─┬─bzip2
│ ├─cdrom
│ ├─gpgv
│ └─4*[http]
├─apache2───5*[apache2]
├─aptd
├─atd
├─avahi-daemon───avahi-daemon
├─bonobo-activati───2*[{bonobo-activat}]
├─chrome─┬─chrome
│ └─18*[{chrome}]
├─chrome───chrome───{chrome}
├─clock-applet───{clock-applet}
├─console-kit-dae───63*[{console-kit-da}]
├─cron
├─cupsd
├─2*[dbus-daemon]
├─2*[dbus-launch]
├─gconfd-2
├─gdm-binary─┬─gdm-simple-slav─┬─Xorg
│ │ ├─gdm-session-wor─┬─gnome-session─┬─applet.+
│ │ │ │ ├─compiz─+++
│ │ │ │ │ +++
│ │ │ │ ├─gdu-not+
│ │ │ │ ├─gnome-p+
│ │ │ │ ├─gnome-p+
│ │ │ │ ├─nautilu+
│ │ │ │ ├─nm-appl+
│ │ │ │ ├─polkit-+
│ │ │ │ ├─ssh-age+
│ │ │ │ ├─vino-se+
│ │ │ │ └─2*[{gno+
│ │ │ └─{gdm-session-wo}
│ │ └─{gdm-simple-sla}
│ └─{gdm-binary}
├─6*[getty]
├─gnome-keyring-d───2*[{gnome-keyring-}]
├─2*[gnome-screensav]
├─gnome-settings-───{gnome-settings}
├─gnome-terminal─┬─bash───bash───pstree
│ ├─gnome-pty-helpe
│ └─2*[{gnome-terminal}]
├─gvfs-afc-volume───{gvfs-afc-volum}
├─gvfs-fuse-daemo───3*[{gvfs-fuse-daem}]
├─gvfs-gdu-volume
├─gvfs-gphoto2-vo
├─gvfsd
├─gvfsd-burn
├─gvfsd-http───{gvfsd-http}
├─gvfsd-metadata
├─gvfsd-trash
├─2*[indicator-apple───{indicator-appl}]
├─indicator-appli
├─indicator-me-se───{indicator-me-s}
├─indicator-messa
├─indicator-sessi───{indicator-sess}
├─indicator-sound
├─mission-control
├─modem-manager
├─multiload-apple───{multiload-appl}
├─mysqld───10*[{mysqld}]
├─notification-ar───{notification-a}
├─notify-osd───{notify-osd}
├─polkitd
├─pulseaudio─┬─gconf-helper───{gconf-helper}
│ └─2*[{pulseaudio}]
├─python───{python}
├─rsyslogd───3*[{rsyslogd}]
├─rtkit-daemon───2*[{rtkit-daemon}]
├─sshd
├─syndaemon
├─ubuntu-sso-logi
├─udevd───2*[udevd]
├─udisks-daemon─┬─udisks-daemon
│ └─{udisks-daemon}
├─update-apt-xapi
├─upowerd
├─upstart-udev-br
├─wnck-applet───{wnck-applet}
└─wpa_supplicant
-
Jsem laik co se linuxu týče ale ještě jsem dohledal že by run-parts měl mít něco společného s etc/cron.daily což by mělo být automatický spouštění příkazů? Pokud se totiž podívám do etc/cron.daily tak tam mám položku apt. Není tedy možný že by se to spouštělo tady odtud? Soubor obsahuje tohle.
#!/bin/sh
#set -e
#
# This file understands the following apt configuration variables:
# Values here are the default.
# Create /etc/apt/apt.conf.d/02periodic file to set your preference.
#
# Dir "/";
# - RootDir for all configuration files
#
# Dir::Cache "var/apt/cache/";
# - Set apt package cache directory
#
# Dir::Cache::Archive "archives/";
# - Set package archive directory
#
# APT::Periodic::Enable "1";
# - Enable the update/upgrade script (0=disable)
#
# APT::Periodic::BackupArchiveInterval "0";
# - Backup after n-days if archive contents changed.(0=disable)
#
# APT::Periodic::BackupLevel "3";
# - Backup level.(0=disable), 1 is invalid.
#
# Dir::Cache::Backup "backup/";
# - Set periodic package backup directory
#
# APT::Archives::MaxAge "0"; (old, deprecated)
# APT::Periodic::MaxAge "0"; (new)
# - Set maximum allowed age of a cache package file. If a cache
# package file is older it is deleted (0=disable)
#
# APT::Archives::MinAge "2"; (old, deprecated)
# APT::Periodic::MinAge "2"; (new)
# - Set minimum age of a package file. If a file is younger it
# will not be deleted (0=disable). Usefull to prevent races
# and to keep backups of the packages for emergency.
#
# APT::Archives::MaxSize "0"; (old, deprecated)
# APT::Periodic::MaxSize "0"; (new)
# - Set maximum size of the cache in MB (0=disable). If the cache
# is bigger, cached package files are deleted until the size
# requirement is met (the biggest packages will be deleted
# first).
#
# APT::Periodic::Update-Package-Lists "0";
# - Do "apt-get update" automatically every n-days (0=disable)
#
# APT::Periodic::Download-Upgradeable-Packages "0";
# - Do "apt-get upgrade --download-only" every n-days (0=disable)
#
# APT::Periodic::Download-Upgradeable-Packages-Debdelta "1";
# - Use debdelta-upgrade to download updates if available (0=disable)
#
# APT::Periodic::Unattended-Upgrade "0";
# - Run the "unattended-upgrade" security upgrade script
# every n-days (0=disabled)
# Requires the package "unattended-upgrades" and will write
# a log in /var/log/unattended-upgrades
#
# APT::Periodic::AutocleanInterval "0";
# - Do "apt-get autoclean" every n-days (0=disable)
#
# APT::Periodic::Verbose "0";
# - Send report mail to root
# 0: no report (or null string)
# 1: progress report (actually any string)
# 2: + command outputs (remove -qq, remove 2>/dev/null, add -d)
# 3: + trace on
check_stamp()
{
stamp="$1"
interval="$2"
if [ $interval -eq 0 ]; then
debug_echo "check_stamp: interval=0"
# treat as no time has passed
return 1
fi
if [ ! -f $stamp ]; then
debug_echo "check_stamp: missing time stamp file: $stamp."
# treat as enough time has passed
return 0
fi
# compare midnight today to midnight the day the stamp was updated
stamp_file="$stamp"
stamp=$(date --date=$(date -r $stamp_file --iso-8601) +%s 2>/dev/null)
if [ "$?" != "0" ]; then
# Due to some timezones returning 'invalid date' for midnight on
# certain dates (eg America/Sao_Paulo), if date returns with error
# remove the stamp file and return 0. See coreutils bug:
# http://lists.gnu.org/archive/html/bug-coreutils/2007-09/msg00176.html
rm -f "$stamp_file"
return 0
fi
now=$(date --date=$(date --iso-8601) +%s 2>/dev/null)
if [ "$?" != "0" ]; then
# As above, due to some timezones returning 'invalid date' for midnight
# on certain dates (eg America/Sao_Paulo), if date returns with error
# return 0.
return 0
fi
delta=$(($now-$stamp))
# intervall is in days, convert to sec.
interval=$(($interval*60*60*24))
debug_echo "check_stamp: interval=$interval, now=$now, stamp=$stamp, delta=$delta (sec)"
# remove timestamps a day (or more) in the future and force re-check
if [ $stamp -gt $(($now+86400)) ]; then
echo "WARNING: file $stamp_file has a timestamp in the future: $stamp"
rm -f "$stamp_file"
return 0
fi
if [ $delta -ge $interval ]; then
return 0
fi
return 1
}
update_stamp()
{
stamp="$1"
touch $stamp
}
# we check here if autoclean was enough sizewise
check_size_constraints()
{
MaxAge=0
eval $(apt-config shell MaxAge APT::Archives::MaxAge)
eval $(apt-config shell MaxAge APT::Periodic::MaxAge)
MinAge=2
eval $(apt-config shell MinAge APT::Archives::MinAge)
eval $(apt-config shell MinAge APT::Periodic::MinAge)
MaxSize=0
eval $(apt-config shell MaxSize APT::Archives::MaxSize)
eval $(apt-config shell MaxSize APT::Periodic::MaxSize)
CacheDir="var/cache/apt/"
eval $(apt-config shell CacheDir Dir::Cache)
CacheDir=${CacheDir%/}
CacheArchive="archives/"
eval $(apt-config shell CacheArchive Dir::Cache::archives)
CacheArchive=${CacheArchive%/}
# sanity check
if [ -z "$CacheDir" -o -z "$CacheArchive" ]; then
echo "empty Dir::Cache or Dir::Cache::archives, exiting"
exit
fi
Cache="${Dir%/}/${CacheDir%/}/${CacheArchive%/}/"
# check age
if [ ! $MaxAge -eq 0 ] && [ ! $MinAge -eq 0 ]; then
debug_echo "aged: ctime <$MaxAge and mtime <$MaxAge and ctime>$MinAge and mtime>$MinAge"
find $Cache -name "*.deb" \( -mtime +$MaxAge -and -ctime +$MaxAge \) -and -not \( -mtime -$MinAge -or -ctime -$MinAge \) -print0 | xargs -r -0 rm -f
elif [ ! $MaxAge -eq 0 ]; then
debug_echo "aged: ctime <$MaxAge and mtime <$MaxAge only"
find $Cache -name "*.deb" -ctime +$MaxAge -and -mtime +$MaxAge -print0 | xargs -r -0 rm -f
else
debug_echo "skip aging since MaxAge is 0"
fi
# check size
if [ ! $MaxSize -eq 0 ]; then
# maxSize is in MB
MaxSize=$(($MaxSize*1024))
#get current time
now=$(date --date=$(date --iso-8601) +%s)
MinAge=$(($MinAge*24*60*60))
# reverse-sort by mtime
for file in $(ls -rt $Cache/*.deb 2>/dev/null); do
du=$(du -s $Cache)
size=${du%%/*}
# check if the cache is small enough
if [ $size -lt $MaxSize ]; then
debug_echo "end remove by archive size: size=$size < $MaxSize"
break
fi
# check for MinAge of the file
if [ $MinAge -ne 0 ]; then
# check both ctime and mtime
mtime=$(stat -c %Y $file)
ctime=$(stat -c %Z $file)
if [ $mtime -gt $ctime ]; then
delta=$(($now-$mtime))
else
delta=$(($now-$ctime))
fi
if [ $delta -le $MinAge ]; then
debug_echo "skip remove by archive size: $file, delta=$delta < $MinAgeSec"
break
else
# delete oldest file
debug_echo "remove by archive size: $file, delta=$delta >= $MinAgeSec (sec), size=$size >= $MaxSize"
rm -f $file
fi
fi
done
fi
}
# deal with the Apt::Periodic::BackupArchiveInterval
do_cache_backup()
{
BackupArchiveInterval="$1"
if [ $BackupArchiveInterval -eq 0 ]; then
return
fi
# Set default values and normalize
Dir="/"
eval $(apt-config shell Dir Dir)
Dir=${Dir%/}
CacheDir="var/cache/apt/"
eval $(apt-config shell CacheDir Dir::Cache)
CacheDir=${CacheDir%/}
if [ -z "$CacheDir" ]; then
debug_echo "practically empty Dir::Cache, exiting"
return 0
fi
CacheArchive="archives/"
eval $(apt-config shell CacheArchive Dir::Cache::Archives)
CacheArchive=${CacheArchive%/}
if [ -z "$CacheArchive" ]; then
debug_echo "practically empty Dir::Cache::archives, exiting"
return 0
fi
BackupLevel=3
eval $(apt-config shell BackupLevel APT::Periodic::BackupLevel)
if [ $BackupLevel -le 1 ]; then
BackupLevel=2 ;
fi
CacheBackup="backup/"
eval $(apt-config shell CacheBackup Dir::Cache::Backup)
CacheBackup=${CacheBackup%/}
if [ -z "$CacheBackup" ]; then
echo "practically empty Dir::Cache::Backup, exiting" 1>&2
return
fi
Cache="${Dir}/${CacheDir}/${CacheArchive}/"
Back="${Dir}/${CacheDir}/${CacheBackup}/"
BackX="${Back}${CacheArchive}/"
for x in $(seq 0 1 $((${BackupLevel}-1))); do
eval "Back${x}=${Back}${x}/"
done
# backup after n-days if archive contents changed.
# (This uses hardlink to save disk space)
BACKUP_ARCHIVE_STAMP=/var/lib/apt/periodic/backup-archive-stamp
if check_stamp $BACKUP_ARCHIVE_STAMP $BackupArchiveInterval; then
if [ $({(cd $Cache 2>/dev/null; find . -name "*.deb"); (cd $Back0 2>/dev/null;find . -name "*.deb") ;}| sort|uniq -u|wc -l) -ne 0 ]; then
mkdir -p $Back
rm -rf $Back$((${BackupLevel}-1))
for y in $(seq $((${BackupLevel}-1)) -1 1); do
eval BackY=${Back}$y
eval BackZ=${Back}$(($y-1))
if [ -e $BackZ ]; then
mv -f $BackZ $BackY ;
fi
done
cp -la $Cache $Back ; mv -f $BackX $Back0
update_stamp $BACKUP_ARCHIVE_STAMP
debug_echo "backup with hardlinks. (success)"
else
debug_echo "skip backup since same content."
fi
else
debug_echo "skip backup since too new."
fi
}
# sleep for a random interval of time (default 30min)
# (some code taken from cron-apt, thanks)
random_sleep()
{
RandomSleep=1800
eval $(apt-config shell RandomSleep APT::Periodic::RandomSleep)
if [ $RandomSleep -eq 0 ]; then
return
fi
if [ -z "$RANDOM" ] ; then
# A fix for shells that do not have this bash feature.
RANDOM=$(dd if=/dev/urandom count=1 2> /dev/null | cksum | cut -c"1-5")
fi
TIME=$(($RANDOM % $RandomSleep))
debug_echo "sleeping for $TIME seconds"
sleep $TIME
}
debug_echo()
{
# Display message if $VERBOSE >= 1
if [ "$VERBOSE" -ge 1 ]; then
echo $1 1>&2
fi
}
# ------------------------ main ----------------------------
# Backup the 7 last versions of APT's extended_states file
# shameless copy from dpkg cron
if cd /var/backups ; then
if ! cmp -s apt.extended_states.0 /var/lib/apt/extended_states; then
cp -p /var/lib/apt/extended_states apt.extended_states
savelog -c 7 apt.extended_states >/dev/null
fi
fi
# check apt-config exstance
if ! which apt-config >/dev/null ; then
exit 0
fi
# check if the user really wants to do something
AutoAptEnable=1 # default is yes
eval $(apt-config shell AutoAptEnable APT::Periodic::Enable)
if [ $AutoAptEnable -eq 0 ]; then
exit 0
fi
# Set VERBOSE mode from apt-config (or inherit from environment)
VERBOSE=0
eval $(apt-config shell VERBOSE APT::Periodic::Verbose)
debug_echo "verbose level $VERBOSE"
if [ "$VERBOSE" -le 2 ]; then
# quiet for 0,1,2
XSTDOUT=">/dev/null"
XSTDERR="2>/dev/null"
XAPTOPT="-qq"
XUUPOPT=""
else
XSTDOUT=""
XSTDERR=""
XAPTOPT=""
XUUPOPT="-d"
fi
if [ "$VERBOSE" -ge 3 ]; then
# trace output
set -x
fi
# laptop check, on_ac_power returns:
# 0 (true) System is on main power
# 1 (false) System is not on main power
# 255 (false) Power status could not be determined
# Desktop systems always return 255 it seems
if which on_ac_power >/dev/null; then
on_ac_power
POWER=$?
if [ $POWER -eq 1 ]; then
debug_echo "exit: system NOT on main power"
exit 0
elif [ $POWER -ne 0 ]; then
debug_echo "power status ($POWER) undetermined, continuing"
fi
debug_echo "system is on main power."
fi
# check if we can lock the cache and if the cache is clean
if which apt-get >/dev/null && ! eval apt-get check -f $XAPTOPT $XSTDERR ; then
debug_echo "error encountered in cron job with \"apt-get check\"."
exit 0
fi
# Global current time in seconds since 1970-01-01 00:00:00 UTC
now=$(date +%s)
# Support old Archive for compatibility.
# Document only Periodic for all controling parameters of this script.
UpdateInterval=0
eval $(apt-config shell UpdateInterval APT::Periodic::Update-Package-Lists)
DownloadUpgradeableInterval=0
eval $(apt-config shell DownloadUpgradeableInterval APT::Periodic::Download-Upgradeable-Packages)
UnattendedUpgradeInterval=0
eval $(apt-config shell UnattendedUpgradeInterval APT::Periodic::Unattended-Upgrade)
AutocleanInterval=0
eval $(apt-config shell AutocleanInterval APT::Periodic::AutocleanInterval)
BackupArchiveInterval=0
eval $(apt-config shell BackupArchiveInterval APT::Periodic::BackupArchiveInterval)
Debdelta=1
eval $(apt-config shell Debdelta APT::Periodic::Download-Upgradeable-Packages-Debdelta)
# check if we actually have to do anything that requires locking the cache
if [ $UpdateInterval -eq 0 ] &&
[ $DownloadUpgradeableInterval -eq 0 ] &&
[ $UnattendedUpgradeInterval -eq 0 ] &&
[ $BackupArchiveInterval -eq 0 ] &&
[ $AutocleanInterval -eq 0 ]; then
# check cache size
check_size_constraints
exit 0
fi
# deal with BackupArchiveInterval
do_cache_backup $BackupArchiveInterval
# sleep random amount of time to avoid hitting the
# mirrors at the same time
random_sleep
# include default system language so that "apt-get update" will
# fetch the right translated package descriptions
if [ -r /etc/default/locale ]; then
. /etc/default/locale
export LANG LANGUAGE LC_MESSAGES LC_ALL
fi
# update package lists
UPDATED=0
UPDATE_STAMP=/var/lib/apt/periodic/update-stamp
if check_stamp $UPDATE_STAMP $UpdateInterval; then
# check for a new archive signing key (against the master keyring)
if eval apt-key net-update $XSTDERR; then
debug_echo "apt-key net-update (success)"
else
debug_echo "apt-key net-update (failure)"
fi
# run apt-get update
if eval apt-get $XAPTOPT -y update $XSTDERR; then
debug_echo "download updated metadata (success)."
if which dbus-send >/dev/null && pidof dbus-daemon >/dev/null; then
if dbus-send --system / app.apt.dbus.updated boolean:true ; then
debug_echo "send dbus signal (success)"
else
debug_echo "send dbus signal (error)"
fi
else
debug_echo "dbus signal not send (command not available)"
fi
update_stamp $UPDATE_STAMP
UPDATED=1
# now run apt-xapian-index if it is installed to ensure the index
# is up-to-date
if [ -x /usr/sbin/update-apt-xapian-index ]; then
nice ionice -c3 update-apt-xapian-index -q
fi
else
debug_echo "download updated metadata (error)"
fi
else
debug_echo "download updated metadata (not run)."
fi
# download all upgradeable packages (if it is requested)
DOWNLOAD_UPGRADEABLE_STAMP=/var/lib/apt/periodic/download-upgradeable-stamp
if [ $UPDATED -eq 1 ] && check_stamp $DOWNLOAD_UPGRADEABLE_STAMP $DownloadUpgradeableInterval; then
if [ $Debdelta -eq 1 ]; then
debdelta-upgrade >/dev/null 2>&1 || true
fi
if eval apt-get $XAPTOPT -y -d dist-upgrade $XSTDERR; then
update_stamp $DOWNLOAD_UPGRADEABLE_STAMP
debug_echo "download upgradable (success)"
else
debug_echo "download upgradable (error)"
fi
else
debug_echo "download upgradable (not run)"
fi
# auto upgrade all upgradeable packages
UPGRADE_STAMP=/var/lib/apt/periodic/upgrade-stamp
if [ $UPDATED -eq 1 ] && which unattended-upgrade >/dev/null && check_stamp $UPGRADE_STAMP $UnattendedUpgradeInterval; then
if unattended-upgrade $XUUPOPT; then
update_stamp $UPGRADE_STAMP
debug_echo "unattended-upgrade (success)"
else
debug_echo "unattended-upgrade (error)"
fi
else
debug_echo "unattended-upgrade (not run)"
fi
# autoclean package archive
AUTOCLEAN_STAMP=/var/lib/apt/periodic/autoclean-stamp
if check_stamp $AUTOCLEAN_STAMP $AutocleanInterval; then
if eval apt-get $XAPTOPT -y autoclean $XSTDERR; then
debug_echo "autoclean (success)."
update_stamp $AUTOCLEAN_STAMP
else
debug_echo "autoclean (error)"
fi
else
debug_echo "autoclean (not run)"
fi
# check cache size
check_size_constraints
#
# vim: set sts=4 ai :
#
-
Hmm, tak už je to jasnější, zkus ten cron job spustit přímo z Terminál (http://wiki.ubuntu.cz/Termin%C3%A1l)u, a zkopíruj tu, co to vypíše... (Tedy pokud se to zasekne, což by mělo. Pokud se to nezasekne, počkej do druhého dne, a pak to zkus znova (do 5 minut od startu počítače, tehdy anacron spouští cron.daily joby)).
sudo sh -x /etc/cron.daily/apt
-
Co je na mé radě prosím špatného?
-
uff, to je ciry amaterismus ..
Však od začáku tvrdím že s linuxem začínám. Mám ho na notebooku teprve 2 měsíce a něco, tak bohužel nebudu zrovna z těch, co si budou sami kompilovat jádro.
Byť plno věcí hledám na googlu než se zeptám, tak si taky plno věcí domýšlím. A proto jsem čekal že třeba zrovna někdo zkušenější mě vyvede z omylu.
-
Myslím, že to bylo spíš na mě... ;)
Když dáš klasický update z Terminál (http://wiki.ubuntu.cz/Termin%C3%A1l)u, tak ten funguje?sudo apt-get update
-
Myslím, že to bylo spíš na mě... ;)
Když dáš klasický update z Terminál (http://wiki.ubuntu.cz/Termin%C3%A1l)u, tak ten funguje?sudo apt-get update
JJ, ten funguje ok. Jinak jsem z cron daily zazálohoval soubor apt-get a taky soubor pro aktualizaci google chrome a následně jsem oba soubory z cron daily smazal. Zatím se zátěž procesoru jeví jako v pořádku tak to budu sledovat a je možný že to opravdu způsoboval CRON.
-
Cron samotný ne, ale asi ten /etc/cron.daily/apt skript...
Vymazáním si pomůžeš jen částečně, protože:
- při každé aktualizaci aptu se ti ten soubor /etc/cron.daily/apt obnoví
- přijdeš o ostatní věci, které ten skript dělá, např. vytváření záloh apt souborů, nebo update-apt-xapian-index
- taky nezjistíme, proč to vlastně blblo
-
Jinak když spustím ten apt-get skritp z cron daily samostatně sám tak se neděje vůbec nic, tak si zatim nejsem jist jetli to dělá on. Zatím ještě budusledovat zatížení systému a budu pozorovat zda to dělal on.
-
Tak po dlouhém sledoávní musím říct, že to opravdu musel být ten skript apt-get. Po jeho odstranění z CRONa už zátěž procesoru neroste. Jinak soubor se sám zatím v CRON neobnovil ani po aktualizaci tak to zatim asi necham takhle.