Fórum Ubuntu CZ/SK
Ubuntu pro osobní počítače => Internet a sítě => Téma založeno: keeema 04 Prosince 2010, 13:28:49
-
Ahoj, po dlouhe dobe jsem vytahl notebook a nainstaloval jsem si na nej Ubuntu 10.10 a mam problem s wifi pripojenim. Pokud na routeru vypnu zabezpeceni, tak se pripojim, ale jakmile pouziji zabezpeceni (zkusil jsem jakekoliv, ale jinak pouzivam WPA) tak sit sice vidim, ale nepripojim se, a znovu se mi objevi zadani hesla... Ve Windows vse ok. Vim ze jsem jiz kdysi tento problem mel, ale nevim jak jsem ho vyresil, jestli vubec. Bohuzel si nepamatuji jakou verzi Ubuntu jsem mel v dobe funkcnosti nainstalovanou. Podle lspci mam Atheros AR2413. Cista instalace, vsechny updaty, zadne dodatecne nataveni.
Dekuji za pomoc
-
Tak jen doplnění, ze svého profilu jsem si všiml, že jsem měl 9.04 a tam mi to šlo. Ale nevím, jestli to bylo tak, že jsem to v této verze nějak rozchodil, a nebo že jsem se to snažil rozchodit ve vyšší verzi bez úspěchu a v této mi to šlapalo tak jsem se k ní vrátil.
-
zkus sem hodit vypis "dmesg | tail" po tom, co se nepovedlo pripojit. typ sitovky/chipset by se taky hodil
-
a balík wpasupplicant(či ako sa to píše) nainštalovaný máš?
-
Sitovka: Atheros AR5005G / dle lspci AR2413
wpasupplicant mam
Vypis:
xxxx@xxxx-NOTEBOOK:~$ dmesg | tail
[ 107.640190] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 107.640207] cfg80211: Restoring regulatory settings
[ 107.640216] cfg80211: Calling CRDA to update world regulatory domain
[ 107.652199] cfg80211: World regulatory domain updated:
[ 107.652210] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 107.652219] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 107.652227] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 107.652234] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 107.652241] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 107.652248] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
-
Nainstaloval jsem Ubuntu 9.04 a tam wifi beha... Trochu zvlastni no... Rad bych pouzival posledni verzi...
-
Nikdo žádný nápad?
-
Pridam se k tematu. Reseni nemam, spis jen par zkusenosti s pcmcia kartou belkin s cipem atheros (presne oznaceni pripadne dopisu, az budu doma - je to AR5007G).
Chovalo se to podobne - kdysi ve starsi verzi (asi 9.04) v pohode slapala s WPA, ale pak po povyseni se nepripojila.
Zkousel jsem i WICD misto NM a stejny vysledek, jen s tim rozdilem, ze to aspon vyhodilo hlasku, ze se nepodarilo ziskat IP adresu. Bez zabezpeceni se v pohode pripoji a funguje.
Nepamatuji si uz, jestli v 9.10 jeste fungovala, ale v 10.04 a 10.10 popsany problem je.
2 starenka: po neuspesnem pokusu o pripojeni je v dmesg vic radku, nez se vejde do tail... Prikladam, jestli z toho pujde neco vykoukat.[ 843.688409] wlan0: authenticate with 00:27:19:19:42:18 (try 1)
[ 843.693180] wlan0: authenticated
[ 843.693262] wlan0: associate with 00:27:19:19:42:18 (try 1)
[ 843.697240] wlan0: RX AssocResp from 00:27:19:19:42:18 (capab=0x431 status=0 aid=1)
[ 843.697252] wlan0: associated
[ 849.869198] wlan0: deauthenticated from 00:27:19:19:42:18 (Reason: 1)
[ 849.870160] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 849.870174] cfg80211: Restoring regulatory settings
[ 849.870183] cfg80211: Calling CRDA to update world regulatory domain
[ 849.892438] cfg80211: World regulatory domain updated:
[ 849.892453] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 849.892461] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 849.892469] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 849.892476] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 849.892483] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 849.892490] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 851.053009] wlan0: authenticate with 00:27:19:19:42:18 (try 1)
[ 851.054737] wlan0: authenticated
[ 851.054807] wlan0: associate with 00:27:19:19:42:18 (try 1)
[ 851.058448] wlan0: RX AssocResp from 00:27:19:19:42:18 (capab=0x431 status=0 aid=1)
[ 851.058458] wlan0: associated
[ 880.849754] wlan0: deauthenticated from 00:27:19:19:42:18 (Reason: 1)
[ 880.850753] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 880.850768] cfg80211: Restoring regulatory settings
[ 880.850777] cfg80211: Calling CRDA to update world regulatory domain
[ 880.864741] cfg80211: World regulatory domain updated:
[ 880.864757] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 880.864765] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 880.864773] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 880.864780] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 880.864787] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 880.864794] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 882.032353] wlan0: authenticate with 00:27:19:19:42:18 (try 1)
[ 882.033890] wlan0: authenticated
[ 882.033948] wlan0: associate with 00:27:19:19:42:18 (try 1)
[ 882.037307] wlan0: RX AssocResp from 00:27:19:19:42:18 (capab=0x431 status=0 aid=1)
[ 882.037317] wlan0: associated
[ 890.688689] wlan0: deauthenticating from 00:27:19:19:42:18 by local choice (reason=3)
[ 890.690380] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 890.690457] cfg80211: Restoring regulatory settings
[ 890.690467] cfg80211: Calling CRDA to update world regulatory domain
[ 890.717138] cfg80211: World regulatory domain updated:
[ 890.717154] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 890.717163] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 890.717170] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 890.717177] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 890.717184] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 890.717191] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)