Fórum Ubuntu CZ/SK
Ostatní => Archiv => Téma založeno: Ondřej Trhoň 30 Prosince 2006, 14:37:46
-
Dobrý den mám problém s Obnovovací frekvencí monitoru v Ubuntu 6.06 Dapper. Ve Windows nebo v Suse běží 80 hz a v Ubuntu jenom nedostačujících 60 hz. Prosím pomote mi. Děkuji.
-
viz. odkazy v podpisu
-
Ještě problémek všechno jsem podle vašeho návodu nastavil a pořád jede 60 hz. Tady je obsah mého Xorg.conf:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "cz"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV18 [GeForce4 MX 440 AGP 8x]"
Driver "nvidia"
BusID "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 28-92
VertRefresh 43-160
# 1280x1024 @ 85.00 Hz (GTF) hsync: 91.38 kHz; pclk: 159.36 MHz
Modeline "1280x1024_85.00" 159.36 1280 1376 1512 1744 1024 1025 1028 1075 -HSync +Vsync
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV18 [GeForce4 MX 440 AGP 8x]"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" "1x1"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" "1x1"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" "1x1"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" "1x1"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" "1x1"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" "1x1"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
-
Este musis dat do sekcie screen tam kde mas depth 24 "1280x1024_85.00" cize bude vyzerat takto:
SubSection "Display"
Depth 24
Modes "1280x1024_85.00" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" "1x1"
EndSubSection
-
No sem resetoval xka (uplne - killall) a porad 60 hz skusim restartovat PC.
Nepovedlo se! i v system - volby - rozliseni je jen 1204 x 1280 a 60 hz.
A nemuze to byt tim ze sem nainstaloval driver nvidia-glx misto nvidia-glx-legacy? Mám Nvidii GeForce 4 440
-
Nie pre gf4 440 je to spravny ovladac a 3d akceleracia ti vlastne funguje?
glxinfo | grep direct
pise direct rendering: Yes?
este v sekcii module zakaz # load "dri"
-
Ano funguje 3D podpora (pise yes) a skusim to s tim load. a pak tom a vypadat:
# load "dri"
?
Bohužel nepomohlo to.
-
Tak uz len posledny pokus v sekcii screen skus zmenit defaultDept na 16 a
SubSection "Display"
Depth 16
Modes "1280x1024_85" "1024x768" "832x624" "800x600" "720x400" "640x480" "1x1"
Ak nepomoze ani toto tak uz neviem. A este otazka precital som si to cele a v zakladnej otazke mas vo win ide na 80 Hz a dalsie nastavenie robis na 85 Hz co by malo byt spravne? Ak tych 80 skus to nastavit znova.
-
Ja sem se spletl 80 mas pravdu zkusim. pockej.
Tak sem to zkusil vsechno prenastavit a nejde nastavit normalne (s v system - volby - rozliseni) uz ani 1280 x 1024!
Toto je nynější obsah Xorg.conf:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
# Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "cz"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV18 [GeForce4 MX 440 AGP 8x]"
Driver "nvidia"
BusID "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 28-85.76
VertRefresh 43-149.57
# 1280x1024 @ 80.00 Hz (GTF) hsync: 85.76 kHz; pclk: 149.57 MHz
Modeline "1280x1024_80.00" 149.57 1280 1376 1512 1744 1024 1025 1028 1072 -HSync +Vsync
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV18 [GeForce4 MX 440 AGP 8x]"
Monitor "Generic Monitor"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "1280x1024_80.00" "1024x768" "832x624" "800x600" "720x400" "640x480" "1x1"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024_80.00" "1024x768" "832x624" "800x600" "720x400" "640x480" "1x1"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" "1x1"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" "1x1"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024_80.00" "1024x768" "832x624" "800x600" "720x400" "640x480" "1x1"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024_80.00" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" "1x
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
Asi skusím dát tohle: sudo dpkg-reconfigure -phigh xserver-xorg.
-
Skus ale stary xorg.conf si zalohuj.
-
Supr sem to reconfiguroval a ted jede i 1204 x 768 na 60 hz. Snad pude obnovit záloha...
Zálohu sem obnovil původní stav tj.:
- nemožnost zvolit 1204 x 1280
- předtím šlo toto rozlišení na 80 hz v ubuntu jde na 60 hz
-
Hele tak nic vono se to nějak spravilo... nevim
No tak uz to zase nefacha.,,,,
-
Prosiiim pomoc....pořád stejný problém.
-
A v tom suse je ako nastaveny xorg.conf ak nieco take pouziva, neda sa to nastavit podla toho? Pripadne tie hodnoty v sekcii monitor su nastavene podla tvojho monitora alebo su generovane automaticky. Inak nechapem to v com este moze byt problem.
P.s inak od zaciatku sa mi paci to posledne rozlisenie co tam mas 1x1. :-)
A tu ti dam moj xorg.conf mozno ta nieco napadne. Ja som zmensoval zo 75Hz na 60Hz(mam LCD).Tych 75 mi nastavilo automaticky po instalacii ovladaca.
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Mon Oct 16 22:13:07 PDT 2006
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
#Section "DRI"
# Mode 0666
#EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
# Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "JT198x6"
HorizSync 30.0 - 80.0
VertRefresh 50.0 - 75.0
# 1280x1024 @ 60.00 Hz (GTF) hsync: 63.60 kHz; pclk: 108.88 MHz
ModeLine "1280x1024_60.00" 108.9 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync
ModeLine "1280x1024_75.00" 138.5 1280 1368 1504 1728 1024 1025 1028 1069 -hsync +vsync
Option "DPMS"
EndSection
Section "Device"
# Option "TripleBuffer" "true"
Identifier "NVIDIA Corporation NV40? [Unknown nVidia Card]"
Driver "nvidia"
EndSection
Section "Screen"
# Enable 32-bit ARGB GLX Visuals
# does not support rendering into the Composite
# Overlay Window, you will need to disable clipping
# of GLX rendering to the X Root window with this
# option, or you will get a blank screen after
# starting compiz:
Identifier "Default Screen"
Device "NVIDIA Corporation NV40? [Unknown nVidia Card]"
Monitor "JT198x6"
DefaultDepth 24
# Option "AddARGBGLXVisuals" "True"
# If you are using an older version of compiz that
# Option "DisableGLXRootClipping" "True"
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024_60" "1280x1024_75" "1280x1024_60" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection
-
Eh ja uz SUse nemam le mel sem v nem 80 hz fAKT.
-
Napiste presny typ vaseho monitoru. Vypada to, ze pri rozliseni 1280x1024 nepodporuje obnovovaci kmitocet 80Hz.
-
Eh no to přesně nevím protože je z firmy.. je na něm napsáno SOny Trinitron MUltiscan300sf. Snad to pomůže. Ale v SuSE opravdu tento kmitočet běžel!
-
Skutecne. Tenhle monitor by mel umet 80Hz pri rozliseni 1280x1024. Viz. http://www.abcdata.com.pl/support/sony/sony300sf.html
Muzu doporucit jedine zkusit jinou verzi ovladace pro grafickou kartu. Nekdy starsi verze ovladace muze fungovat lepe nez novejsi!
-
dobre zkusim. nejde to nějak přes repozitáře?