Fórum Ubuntu CZ/SK
Ostatní => Archiv => Téma založeno: gallyleo 05 Ledna 2007, 11:54:44
-
mam taky zvlastny problem, prave som presiel s Dappera na Edgy Eft. Mam bluetooth set logitech MX 5000. nikdy predtym mi to nerobilo, ani v daperovi, ani v inom distre, ale ked nabehne login obrazovka tak mi NEFUNGUJE ani klavesnica ani mys. musim odpojit a zapojit USB bleutooth modul do USB portu. Viete si asi predstavit aka je to otrava zakazdym ked zapnem pocitac toto robit, nehovoriac ze ked s niecim tolko manipuluje a moze sa to pokazit, tak sa to casom pokazi. Neviete niekto poradit, pls. Este som sa s tym nestretol. rozmyslal som ci to nema nieco spolocne s tym novy startom....neviem, nie som zrovna linux GURU. dakujem
-
Take pouzivam bluetooth mys v edgy, nastaveni mam takto:
1/ do souboru /etc/modules jsem pridal automaticke nacitani modulu hidp (Human Interface Device Protocol)
# Load the HIDP module automatically
hidp2/ v souboru /etc/default/bluetooth jsem nastavil
BLUETOOTH_ENABLED=1
HIDD_ENABLED=1
HIDD_OPTIONS="--master --server"3/ do souboru /etc/rc.local jsem o radek nad "exit 0" pridal
# Start the Bluetooth HID daemon and search for available devices
hidd --searchPo restartu pocitac (notebook s vestavenym bluetooth rozhranim) hleda dostupnou bluetooth mys, pokud najde, tak ji pripoji. Pokud v momentu startu neni zadna bluetooth mys nalezena (zapomenu ji zapnout), zustane demon bezet a mys pripoji az po zapnuti mysi.
-
prave som to urobil tak ako ste mi napisali, bohuzial sa nic nezmenilo a musim vysunut a opat zasunut bluetooth modul.... mozno treba zmenit este nieco v tych konfigurakoch. preposielam moje konfigy ako som ich upravil: /etc/default/bluetooth
# Defaults for bluez-utils
# This file supersedes /etc/default/bluez-pan. If
# that exists on your system, you should use this
# file instead and remove the old one. Until you
# do so, the contents of this file will be ignored.
# start bluetooth on boot?
# compatibility note: If this variable is not found bluetooth will
# start
BLUETOOTH_ENABLED=1
############ HIDD
#
# To have Bluetooth mouse and keyboard support, get the
# Linux 2.6.6 patch or better from bluez.org, and set
# HIDD_ENABLED to 1.
HIDD_ENABLED=1
HIDD_OPTIONS="--master --server"
# to make hidd always use a particular interface, use something
# like this, substituting the bdaddr of the interface:
# HIDD_OPTIONS="-i AA:BB:CC:DD:EE:FF --server"
#
# remove '--master' if you're having trouble working with Ericsson
# T630 phones with hidd operational at the same time.
############ COMPATIBILITY WITH OLD BLUEZ-PAN
# Compatibility: if old PAN config exists, use it
# rather than this file.
if test -f /etc/default/bluez-pan; then
. /etc/default/bluez-pan
return
fi
############
############ DUND
#
# Run dund -- this allows ppp logins. 1 for enabled, 0 for disabled.
DUND_ENABLED=0
# Arguments to dund: defaults to acting as a server
DUND_OPTIONS="--listen --persist"
# Run dund --help to see the full array of options.
# Here are some examples:
#
# Connect to any nearby host offering access
# DUND_OPTIONS="--search"
#
# Connect to host 00:11:22:33:44:55
# DUND_OPTIONS="--connect 00:11:22:33:44:55"
#
# Listen on channel 3
# DUND_OPTIONS="--listen --channel 3"
# Special consideration is needed for certain devices. Microsoft
# users see the --msdun option. Ericsson P800 users will need to
# listen on channel 3 and also run 'sdptool add --channel=3 SP'
############ PAND
#
# Run pand -- ethernet: creates new network interfaces bnep
# that can be configured in /etc/network/interfaces
# set to 1 for enabled, 0 for disabled
PAND_ENABLED=0
# Arguments to pand
# Read the PAN howto for ways to set this up
# http://bluez.sourceforge.net/contrib/HOWTO-PAN
PAND_OPTIONS=""
# example pand lines
#
# Act as the controller of an ad-hoc network
# PAND_OPTIONS="--listen --role GN"
#
# Act as a network access point: routes to other networks
# PAND_OPTIONS="--listen --role NAP"
#
# Act as a client of an ad-hoc controller with number 00:11:22:33:44:55
# PAND_OPTIONS="--role PANU --connect 00:11:22:33:44:55"
#
# Connect to any nearby network controller (access point or ad-hoc)
# PAND_OPTIONS="--role PANU --search"
############ SDPTOOL
# this variable controls the options passed to sdptool on boot, useful if you
# need to setup sdpd on boot.
# options are ;-separated, i.e. for every ; an sdptool instance will be
# launched
#
# examples:
# SDPTOOL_OPTIONS="add --channel=3 SP" # ericsson P800 serial profile
# SDPTOOL_OPTIONS="add --channel=8 OPUSH ; add --channel=9 FTRN" # motorola
# # object push and file transfer
SDPTOOL_OPTIONS=""/etc/modules
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.
lp
sbp2
hidp/etc/rc.local
#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.
# Start the Bluetooth HID daemon and search for available devices
hidd --search
exit 0
-
Mam to presne takto. Funguje bez problemu. Vic poradit bohuzel neumim.
Ten USB Bluetooth modul ma ovladac primo v jadre? Mozna bude problem v tom. Znate presnou znacku a typ toho modulu?
-
logitech bluetooth 2.0 EDR , divne mi je to, ze este predtym ani v dapperovi ani v inej distro som takyto problem nemal....
-
este som zistil jeden zaujimavy moment: asi 3s na prihlasovacej obrazovke to ide, potom sa to zasekne. fakt netusim co teraz... :(
-
Koukam ze je to nahlasene na launchpadu jako bug #29506 (https://bugs.launchpad.net/ubuntu/+source/bluez-utils/+bug/29506/), doporucuji zkusit toto (https://bugs.launchpad.net/ubuntu/+source/bluez-utils/+bug/29506/comments/8).
-
dakujem za pomoc, bohuzial zase neuspesne. pomocou hcitool scan som nedostal nic, len No device.
a ked som tam zadal cisla ktore som nasiel na zadnej strane klavesnice a mysi (nanestatie na myske to mam dost osuchane, takze neviem isto ci som zadal spravnu mac) tak sa nic nezmenilo. A ani hidd --search mi nenasiel zariadenia. asi rezignujem a vratim sa k Dapperovi, len sa mi to nechce znovu preinstalovat, ale ani zakazdym sa hrat s modulom. nerozumiem tomu...
-
tak som presiel spat k Dapperovi a pockam az na Feisty Fawn...:( ked si predstavim kolko som s tym zabil casu a kym vsetko dokonfigurujem....looool :) s linuxom sa clovek nenudi ;)
-
potvrzuji funkcnost postupu z prispevku #2 i ve feisty
-
měl jsem stejný problém jako v #1, postupoval jsem podle #2, ale zase nic. Všimnul jsem si že po restartu chvíli myš(set MX5000) běží, ale po přehátí login zvuku přestane. Experimentálně jsem zkusil v /etc/default/bluetooth vypnout BLUETOOTH_ENABLED=1 na 0, a ono to jede jako po másle.
mám to takhle:
# start bluetooth on boot?
# compatibility note: If this variable is not found bluetooth will
# start
BLUETOOTH_ENABLED=0
############ HIDD
#
# To have Bluetooth mouse and keyboard support, get the
# Linux 2.6.6 patch or better from bluez.org, and set
# HIDD_ENABLED to 1.
HIDD_ENABLED=1
HIDD_OPTIONS="--master --server"
# to make hidd always use a particular interface, use something
# like this, substituting the bdaddr of the interface:
# HIDD_OPTIONS="-i AA:BB:CC:DD:EE:FF --server"
#Na linuxu jedu teprve tři týdny, takže nevím, jestli jsem tím neudělal nějakou botu. Zatím jsem spokojený.