Fórum Ubuntu CZ/SK

Ubuntu pro osobní počítače => Hardware => Téma založeno: radimk 09 Listopadu 2011, 20:46:13

Název: Tv tuner Gigabyte 7300
Přispěvatel: radimk 09 Listopadu 2011, 20:46:13

Zdravím všechny. Mám prosbu. Minulý týden jsem odinstaloval Widle a nainstaloval Ubuntu. Jsem s ním maximálně spokojený. Jsem naprostý laik, zatím Ubuntu objevuju a potřeboval bych nějakým způsobem rozchodit Tv tuner Gigabyte 7300. Díky moc za pomoc.
Radim.

Název: Re:Tv tuner Gigabyte 7300
Přispěvatel: jAster_BA 09 Listopadu 2011, 22:27:36

Je to cez USB? Otvor terminál a napíš tam

Kód: [Vybrat]

lsusb a výpis hoď sem.

Název: Re:Tv tuner Gigabyte 7300
Přispěvatel: radimk 10 Listopadu 2011, 21:53:55

Citace: jAster_BA  09 Listopadu 2011, 22:27:36

Je to cez USB? Otvor terminál a napíš tam

Kód: [Vybrat]

lsusb a výpis hoď sem.

USB Tv Tuner jsem zasunul do USB a hodilo mi to níže uvedenou hlášku:
terminál mi napsal:

Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 045e:0084 Microsoft Corp. Basic Optical Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 1b80:d393 Afatech
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Název: Re:Tv tuner Gigabyte 7300
Přispěvatel: daysleeper 10 Listopadu 2011, 22:25:39

Zvládl bys zkusit postup podle této stránky?
http://linuxtv.org/wiki/index.php/DVB-T_USB_Devices
hledej zařízení Twintech-UT-30

Název: Re:Tv tuner Gigabyte 7300
Přispěvatel: radimk 10 Listopadu 2011, 23:02:48

Citace: daysleeper  10 Listopadu 2011, 22:25:39

Zvládl bys zkusit postup podle této stránky?
http://linuxtv.org/wiki/index.php/DVB-T_USB_Devices
hledej zařízení Twintech-UT-30

Ze stránek http://linuxtv.org/wiki/index.php/DVB-T_USB_Devices jsem si stáhl zip balíček od TwinTech TWINTECH-UT-30 a v readme.txt z balíčku mi to píše


RTL2832U Linux instalace ovladače

1 doporučujeme instalaci ovladače pomocí "root" výsada

2 Zkopírujte balík "v4l_rtl2832_install.tar.bz2" a "install.sh" do složky

3 Zadejte složku, zadejte následující příkaz k instalaci rtl2832u ovladače pro Linux:

sh. / install.sh

4. Zapojte v našem DVB-T USB zařízení;
   Typu "lsmod | grep dvb", a to ukáže
    dvb_usb_rtl2831u
    dvb_usb
    dvb_core
    i2c_core
   Váš řidič byl úspěšně nainstalován.

a moc se v tom nevyznám  ???

Název: Re:Tv tuner Gigabyte 7300
Přispěvatel: daysleeper 10 Listopadu 2011, 23:35:33

• Rozbal ten zip archiv.
• Otevři Terminál (http://wiki.ubuntu.cz/Termin%C3%A1l) a pomocí příkazu cd se přesuň do adresáře, který po rozbalení vznikl.
• Zadej příkaz k instalaci: sudo bash ./install.sh
• Pokud vidíš Installation done (=hotovo), zasuň tuner a vyzkoušej ho.

Název: Re:Tv tuner Gigabyte 7300
Přispěvatel: radimk 11 Listopadu 2011, 09:36:03

Citace: daysleeper  10 Listopadu 2011, 23:35:33

• Rozbal ten zip archiv.
• Otevři Terminál (http://wiki.ubuntu.cz/Termin%C3%A1l) a pomocí příkazu cd se přesuň do adresáře, který po rozbalení vznikl.
• Zadej příkaz k instalaci: sudo bash ./install.sh
• Pokud vidíš Installation done (=hotovo), zasuň tuner a vyzkoušej ho.

Postupoval jsem správně?


radim@radim-MSI-NOTEBOOK-VR630:~$ /home/radim/Plocha/v4l-dvb-b88d4f790cd6/
bash: /home/radim/Plocha/v4l-dvb-b88d4f790cd6/: je adresářem
radim@radim-MSI-NOTEBOOK-VR630:~$ sudo bash ./install.sh
[sudo] password for radim:
asdSorry, try again.
[sudo] password for radim:
20Sorry, try again.
[sudo] password for radim:
Sorry, try again.
sudo: 3 incorrect password attempts

Do terminálu mi nešlo napsat heslo. Nefungovala mi klávesnice ani písmena ani číslovky:(

Název: Re:Tv tuner Gigabyte 7300
Přispěvatel: macu 11 Listopadu 2011, 09:38:59

v terminálu se heslo nezobrazuje, musíš psát po paměti

Název: Re:Tv tuner Gigabyte 7300
Přispěvatel: radimk 11 Listopadu 2011, 09:56:43

Citace: macu  11 Listopadu 2011, 09:38:59

v terminálu se heslo nezobrazuje, musíš psát po paměti

po zadání hesla mi terminál napsal následující:


radim@radim-MSI-NOTEBOOK-VR630:~$ '/home/radim/Stažené/DVBT-DAB_LinuxDriver'
bash: /home/radim/Stažené/DVBT-DAB_LinuxDriver: je adresářem
radim@radim-MSI-NOTEBOOK-VR630:~$ sudo sh. / install.sh
[sudo] password for radim:
sudo: sh.: command not found
radim@radim-MSI-NOTEBOOK-VR630:~$

Mám zadanou správnou adresu? V adresáři DVBT-DAB_LinuxDriver mám ještě jeden nerozbalený balíček.

Název: Re:Tv tuner Gigabyte 7300
Přispěvatel: daysleeper 11 Listopadu 2011, 16:13:21

Citace: radimk  11 Listopadu 2011, 09:56:43

...
radim@radim-MSI-NOTEBOOK-VR630:~$ sudo sh. / install.sh
...

Tento příkaz v mém návodu nikde není, kde jsi ho vzal?
Vždy je asi bezpečnější příkazy kopírovat, ne přepisovat.

Název: Re:Tv tuner Gigabyte 7300
Přispěvatel: jAster_BA 11 Listopadu 2011, 16:36:14

A ešte k tomu je to aj zle napísané ;)

Název: Re:Tv tuner Gigabyte 7300
Přispěvatel: radimk 11 Listopadu 2011, 20:20:39

Citace: jAster_BA  11 Listopadu 2011, 16:36:14

A ešte k tomu je to aj zle napísané ;)

tak už opravdu nevím co s tím do terminálu jsem napsal následující:
1 pokus
radim@radim-MSI-NOTEBOOK-VR630:~$ cd /
radim@radim-MSI-NOTEBOOK-VR630:/$ '/home/radim/Stažené/DVBT-DAB_LinuxDriver' sudo bash ./install.sh
bash: /home/radim/Stažené/DVBT-DAB_LinuxDriver: je adresářem
2 pokus
radim@radim-MSI-NOTEBOOK-VR630:/$ '/home/radim/Stažené/DVBT-DAB_LinuxDriver' sudo bash ./install.sh
bash: /home/radim/Stažené/DVBT-DAB_LinuxDriver: je adresářem
radim@radim-MSI-NOTEBOOK-VR630:/$

a vždycky mě to pošle k šípku

když otevřu terminál mám vepsaný tento text: radim@radim-MSI-NOTEBOOK-VR630:~$
a instalační ovládače mám na adrese: '/home/radim/Stažené/DVBT-DAB_LinuxDriver'

Název: Re:Tv tuner Gigabyte 7300
Přispěvatel: daysleeper 12 Listopadu 2011, 01:04:30

Nejdřív přejít do adresáře, pak spustit.

Kód: [Vybrat]

cd /home/radim/Stažené/DVBT-DAB_LinuxDriver
sudo bash ./install.sh


Název: Re:Tv tuner Gigabyte 7300
Přispěvatel: radimk 12 Listopadu 2011, 08:26:07

Pro všechny případy jsem zkopíroval text z terminálu:

Kód: [Vybrat]

radim@radim-MSI-NOTEBOOK-VR630:~$ cd /home/radim/Stažené/DVBT-DAB_LinuxDriver
radim@radim-MSI-NOTEBOOK-VR630:~/Stažené/DVBT-DAB_LinuxDriver$ sudo bash ./install.sh
[sudo] password for radim:
Starting to install
make -C /home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l clean
make[1]: Entering directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l'
No version yet, using 3.0.0-12-generic
make[1]: Leaving directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l'
make[1]: Entering directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l'
rm -f *~ *.o *.ko .*.o.cmd .*.ko.cmd *.mod.c av7110_firm.h fdump \
config-compat.h Module.symvers Module.markers modules.order
make -C firmware clean
make[2]: Entering directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l/firmware'
rm -f ihex2fw
rm -f vicam/firmware.fw dabusb/firmware.fw dabusb/bitstream.bin ttusb-budget/dspbootcode.bin cpia2/stv0672_vp4.bin av7110/bootcode.bin
make[2]: Leaving directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l/firmware'
make -C ../v4l2-spec clean
make[2]: Entering directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-spec'
rm -f *.stamp
rm -f videodev2.h.xml
rm -f capture.c.xml
rm -f v4l2grab.c.xml
rm -f capture
rm -f indices.xml entities.xml
rm -rf v4l2 v4l2-single v4l2.pdf man
find . -type l -exec rm '{}' \;
make[2]: Leaving directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-spec'
make -C ../dvb-spec/dvbapi clean
make[2]: Entering directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/dvb-spec/dvbapi'
rm -f *.stamp
rm -f indices.xml entities.xml
find . -type l -exec rm '{}' \;
make[2]: Leaving directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/dvb-spec/dvbapi'
make -C ../v4l2-apps clean
make[2]: Entering directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps'
make -C libv4l clean
make[3]: Entering directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/libv4l'
rm -f *~ include/*~ DEADJOE include/DEADJOE
make -C libv4lconvert V4L2_LIB_VERSION=0.6.2-test clean
make[4]: Entering directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/libv4l/libv4lconvert'
rm -f *.a *.so* *.o *.d */*.o */*.d libv4lconvert.pc log *~ */*~
rm -f *.orig *.rej */*.orig */*.rej DEADJOE */DEADJOE *-decomp
make[4]: Leaving directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/libv4l/libv4lconvert'
make -C libv4l2 V4L2_LIB_VERSION=0.6.2-test clean
make[4]: Entering directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/libv4l/libv4l2'
rm -f *.a *.so* *.o *.d libv4l2.pc log *~ *.orig *.rej DEADJOE
make[4]: Leaving directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/libv4l/libv4l2'
make -C libv4l1 V4L2_LIB_VERSION=0.6.2-test clean
make[4]: Entering directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/libv4l/libv4l1'
rm -f *.a *.so* *.o *.d libv4l1.pc log *~ *.orig *.rej DEADJOE
make[4]: Leaving directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/libv4l/libv4l1'
make[3]: Leaving directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/libv4l'
make -C libv4l2util clean
make[3]: Entering directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/libv4l2util'
rm -f frequencies.o v4l2_driver.o libv4l2util.so libv4l2util.a
rm -f core core.[0123456789]* *~ *.o
rm -f *.d
make[3]: Leaving directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/libv4l2util'
make -C util clean
make[3]: Entering directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/util'
rm -f v4l2-ctl v4l2-dbg v4l2-compliance ivtv-ctl cx18-ctl v4l2-sysfs-path decode_tm6000 v4l2-chipids.cpp
if [ -f qv4l2/Makefile ]; then make -C qv4l2 clean; fi
rm -f qv4l2/qv4l2 qv4l2/Makefile
make -C xc3028-firmware clean
make[4]: Entering directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/util/xc3028-firmware'
rm -f firmware-tool
rm -f core core.[0123456789]* *~ *.o
rm -f *.d
make[4]: Leaving directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/util/xc3028-firmware'
rm -f v4l2-chipids.cpp
rm -rf keycodes parse.h keytable
rm -f core core.[0123456789]* *~ *.o
rm -f *.d
make[3]: Leaving directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/util'
make -C test clean
make[3]: Entering directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/test'
rm -f ioctl-test sliced-vbi-test sliced-vbi-detect vbi-test v4lgrab v4l2grab driver-test pixfmt-test stress-buffer capture-example
rm -f core core.[0123456789]* *~ *.o
rm -f *.d
make[3]: Leaving directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/test'
rm -f -rf include
make[2]: Leaving directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps'
make[1]: Leaving directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l'
make -C /home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l
make[1]: Entering directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l'
scripts/make_makefile.pl
Updating/Creating .config
Preparing to compile for kernel version 3.0.0

***WARNING:*** You do not have the full kernel sources installed.
This does not prevent you from building the v4l-dvb tree if you have the
kernel headers, but the full kernel source may be required in order to use
make menuconfig / xconfig / qconfig.

If you are experiencing problems building the v4l-dvb tree, please try
building against a vanilla kernel before reporting a bug.

Vanilla kernels are available at http://kernel.org.
On most distros, this will compile a newly downloaded kernel:

cp /boot/config-`uname -r` <your kernel dir>/.config
cd <your kernel dir>
make all modules_install install

Please see your distro's web site for instructions to build a new kernel.

Created default (all yes) .config file
./scripts/make_myconfig.pl
make[1]: Leaving directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l'
make[1]: Entering directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l'
perl scripts/make_config_compat.pl /lib/modules/3.0.0-12-generic/build ./.myconfig ./config-compat.h
creating symbolic links...
ln -sf . oss
make -C firmware prep
make[2]: Entering directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l/firmware'
make[2]: Leaving directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l/firmware'
make -C firmware
make[2]: Entering directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l/firmware'
  CC  ihex2fw
Generating vicam/firmware.fw
Generating dabusb/firmware.fw
Generating dabusb/bitstream.bin
Generating ttusb-budget/dspbootcode.bin
Generating cpia2/stv0672_vp4.bin
Generating av7110/bootcode.bin
make[2]: Leaving directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l/firmware'
Kernel build directory is /lib/modules/3.0.0-12-generic/build
make -C /lib/modules/3.0.0-12-generic/build SUBDIRS=/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l CFLAGS="-I../linux/include -D__KERNEL__ -I/include -DEXPORT_SYMTAB" modules
make[2]: Entering directory `/usr/src/linux-headers-3.0.0-12-generic'
  CC [M]  /home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l/tuner-xc2028.o
In file included from <command-line>:0:0:
/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l/config-compat.h:4:28: fatal error: linux/autoconf.h: No such file or directory
compilation terminated.
make[3]: *** [/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l/tuner-xc2028.o] Error 1
make[2]: *** [_module_/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l] Error 2
make[2]: Leaving directory `/usr/src/linux-headers-3.0.0-12-generic'
make[1]: *** [default] Error 2
make[1]: Leaving directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l'
make: *** [all] Error 2
make -C /home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l install
make[1]: Entering directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l'
-e
Removing obsolete files from /lib/modules/3.0.0-12-generic/kernel/drivers/media/video:

-e
Removing obsolete files from /lib/modules/3.0.0-12-generic/kernel/drivers/media/dvb/cinergyT2:

-e
Removing obsolete files from /lib/modules/3.0.0-12-generic/kernel/drivers/media/dvb/frontends:

Installing kernel modules under /lib/modules/3.0.0-12-generic/kernel/drivers/media/:
/sbin/depmod -a 3.0.0-12-generic
make -C firmware install
make[2]: Entering directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l/firmware'
Installing firmwares at /lib/firmware: vicam/firmware.fw dabusb/firmware.fw dabusb/bitstream.bin ttusb-budget/dspbootcode.bin cpia2/stv0672_vp4.bin av7110/bootcode.bin
make[2]: Leaving directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l/firmware'
make[1]: Leaving directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l'
Installation Done
radim@radim-MSI-NOTEBOOK-VR630:~/Stažené/DVBT-DAB_LinuxDriver$ sudo bash ./install.sh
Starting to install
make -C /home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l clean
make[1]: Entering directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l'
No version yet, using 3.0.0-12-generic
make[1]: Leaving directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l'
make[1]: Entering directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l'
rm -f *~ *.o *.ko .*.o.cmd .*.ko.cmd *.mod.c av7110_firm.h fdump \
config-compat.h Module.symvers Module.markers modules.order
make -C firmware clean
make[2]: Entering directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l/firmware'
rm -f ihex2fw
rm -f vicam/firmware.fw dabusb/firmware.fw dabusb/bitstream.bin ttusb-budget/dspbootcode.bin cpia2/stv0672_vp4.bin av7110/bootcode.bin
make[2]: Leaving directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l/firmware'
make -C ../v4l2-spec clean
make[2]: Entering directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-spec'
rm -f *.stamp
rm -f videodev2.h.xml
rm -f capture.c.xml
rm -f v4l2grab.c.xml
rm -f capture
rm -f indices.xml entities.xml
rm -rf v4l2 v4l2-single v4l2.pdf man
find . -type l -exec rm '{}' \;
make[2]: Leaving directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-spec'
make -C ../dvb-spec/dvbapi clean
make[2]: Entering directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/dvb-spec/dvbapi'
rm -f *.stamp
rm -f indices.xml entities.xml
find . -type l -exec rm '{}' \;
make[2]: Leaving directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/dvb-spec/dvbapi'
make -C ../v4l2-apps clean
make[2]: Entering directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps'
make -C libv4l clean
make[3]: Entering directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/libv4l'
rm -f *~ include/*~ DEADJOE include/DEADJOE
make -C libv4lconvert V4L2_LIB_VERSION=0.6.2-test clean
make[4]: Entering directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/libv4l/libv4lconvert'
rm -f *.a *.so* *.o *.d */*.o */*.d libv4lconvert.pc log *~ */*~
rm -f *.orig *.rej */*.orig */*.rej DEADJOE */DEADJOE *-decomp
make[4]: Leaving directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/libv4l/libv4lconvert'
make -C libv4l2 V4L2_LIB_VERSION=0.6.2-test clean
make[4]: Entering directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/libv4l/libv4l2'
rm -f *.a *.so* *.o *.d libv4l2.pc log *~ *.orig *.rej DEADJOE
make[4]: Leaving directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/libv4l/libv4l2'
make -C libv4l1 V4L2_LIB_VERSION=0.6.2-test clean
make[4]: Entering directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/libv4l/libv4l1'
rm -f *.a *.so* *.o *.d libv4l1.pc log *~ *.orig *.rej DEADJOE
make[4]: Leaving directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/libv4l/libv4l1'
make[3]: Leaving directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/libv4l'
make -C libv4l2util clean
make[3]: Entering directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/libv4l2util'
rm -f frequencies.o v4l2_driver.o libv4l2util.so libv4l2util.a
rm -f core core.[0123456789]* *~ *.o
rm -f *.d
make[3]: Leaving directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/libv4l2util'
make -C util clean
make[3]: Entering directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/util'
rm -f v4l2-ctl v4l2-dbg v4l2-compliance ivtv-ctl cx18-ctl v4l2-sysfs-path decode_tm6000 v4l2-chipids.cpp
if [ -f qv4l2/Makefile ]; then make -C qv4l2 clean; fi
rm -f qv4l2/qv4l2 qv4l2/Makefile
make -C xc3028-firmware clean
make[4]: Entering directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/util/xc3028-firmware'
rm -f firmware-tool
rm -f core core.[0123456789]* *~ *.o
rm -f *.d
make[4]: Leaving directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/util/xc3028-firmware'
rm -f v4l2-chipids.cpp
rm -rf keycodes parse.h keytable
rm -f core core.[0123456789]* *~ *.o
rm -f *.d
make[3]: Leaving directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/util'
make -C test clean
make[3]: Entering directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/test'
rm -f ioctl-test sliced-vbi-test sliced-vbi-detect vbi-test v4lgrab v4l2grab driver-test pixfmt-test stress-buffer capture-example
rm -f core core.[0123456789]* *~ *.o
rm -f *.d
make[3]: Leaving directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/test'
rm -f -rf include
make[2]: Leaving directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps'
make[1]: Leaving directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l'
make -C /home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l
make[1]: Entering directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l'
scripts/make_makefile.pl
Updating/Creating .config
Preparing to compile for kernel version 3.0.0

***WARNING:*** You do not have the full kernel sources installed.
This does not prevent you from building the v4l-dvb tree if you have the
kernel headers, but the full kernel source may be required in order to use
make menuconfig / xconfig / qconfig.

If you are experiencing problems building the v4l-dvb tree, please try
building against a vanilla kernel before reporting a bug.

Vanilla kernels are available at http://kernel.org.
On most distros, this will compile a newly downloaded kernel:

cp /boot/config-`uname -r` <your kernel dir>/.config
cd <your kernel dir>
make all modules_install install

Please see your distro's web site for instructions to build a new kernel.

Created default (all yes) .config file
./scripts/make_myconfig.pl
make[1]: Leaving directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l'
make[1]: Entering directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l'
perl scripts/make_config_compat.pl /lib/modules/3.0.0-12-generic/build ./.myconfig ./config-compat.h
creating symbolic links...
ln -sf . oss
make -C firmware prep
make[2]: Entering directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l/firmware'
make[2]: Leaving directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l/firmware'
make -C firmware
make[2]: Entering directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l/firmware'
  CC  ihex2fw
Generating vicam/firmware.fw
Generating dabusb/firmware.fw
Generating dabusb/bitstream.bin
Generating ttusb-budget/dspbootcode.bin
Generating cpia2/stv0672_vp4.bin
Generating av7110/bootcode.bin
make[2]: Leaving directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l/firmware'
Kernel build directory is /lib/modules/3.0.0-12-generic/build
make -C /lib/modules/3.0.0-12-generic/build SUBDIRS=/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l CFLAGS="-I../linux/include -D__KERNEL__ -I/include -DEXPORT_SYMTAB" modules
make[2]: Entering directory `/usr/src/linux-headers-3.0.0-12-generic'
  CC [M]  /home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l/tuner-xc2028.o
In file included from <command-line>:0:0:
/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l/config-compat.h:4:28: fatal error: linux/autoconf.h: No such file or directory
compilation terminated.
make[3]: *** [/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l/tuner-xc2028.o] Error 1
make[2]: *** [_module_/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l] Error 2
make[2]: Leaving directory `/usr/src/linux-headers-3.0.0-12-generic'
make[1]: *** [default] Error 2
make[1]: Leaving directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l'
make: *** [all] Error 2
make -C /home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l install
make[1]: Entering directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l'
-e
Removing obsolete files from /lib/modules/3.0.0-12-generic/kernel/drivers/media/video:

-e
Removing obsolete files from /lib/modules/3.0.0-12-generic/kernel/drivers/media/dvb/cinergyT2:

-e
Removing obsolete files from /lib/modules/3.0.0-12-generic/kernel/drivers/media/dvb/frontends:

Installing kernel modules under /lib/modules/3.0.0-12-generic/kernel/drivers/media/:
/sbin/depmod -a 3.0.0-12-generic
make -C firmware install
make[2]: Entering directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l/firmware'
Installing firmwares at /lib/firmware: vicam/firmware.fw dabusb/firmware.fw dabusb/bitstream.bin ttusb-budget/dspbootcode.bin cpia2/stv0672_vp4.bin av7110/bootcode.bin
make[2]: Leaving directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l/firmware'
make[1]: Leaving directory `/home/radim/Stažené/DVBT-DAB_LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l'
Installation Done

Po instalaci jsem zasunul do USB TV tuner, USB mi nenahlásilo připojení TV tuneru a program Me TV hlásí "žádné DVB zařízení".

Název: Re:Tv tuner Gigabyte 7300
Přispěvatel: Rover623 12 Listopadu 2011, 10:15:07

Já tam vidím 2 chyby, ta první je, že by bylo dobré ten instalátor přesunout do složky která nemá v názvu diakritiku. Za druhé ti chybí zdrojové kódy jádra, nainstaluješ je takhle

Kód: [Vybrat]

sudo apt-get install build-essential linux-headers-`uname -r`

Název: Re:Tv tuner Gigabyte 7300
Přispěvatel: radimk 12 Listopadu 2011, 16:38:20

Citace: Rover623  12 Listopadu 2011, 10:15:07

Já tam vidím 2 chyby, ta první je, že by bylo dobré ten instalátor přesunout do složky která nemá v názvu diakritiku. Za druhé ti chybí zdrojové kódy jádra, nainstaluješ je takhle

Kód: [Vybrat]

sudo apt-get install build-essential linux-headers-`uname -r`

nainstaloval jsem zdrojové kódy jádra:
text z terminálu:

Kód: [Vybrat]

radim@radim-MSI-NOTEBOOK-VR630:~$ cd
radim@radim-MSI-NOTEBOOK-VR630:~$ sudo apt-get install build-essential linux-headers-`uname -r`
[sudo] password for radim:
Čtu seznamy balíků... Hotovo
Vytvářím strom závislostí       
Čtu stavové informace... Hotovo
build-essential je již nejnovější verze.
linux-headers-3.0.0-12-generic je již nejnovější verze.
linux-headers-3.0.0-12-generic nastaven jako instalovaný ručně.
Následující balík byl nainstalován automaticky a již není potřeba:
  libreadline5
Pro jejich odstranění použijte „apt-get autoremove“.
0 aktualizováno, 0 nově instalováno, 0 k odstranění a 4 neaktualizováno.
radim@radim-MSI-NOTEBOOK-VR630:~$
ovladače jsem dal bez diakritiky na /home/radim/Dokumenty/LinuxDriver

Kód: [Vybrat]

radim@radim-MSI-NOTEBOOK-VR630:~/Dokumenty/LinuxDriver$ sudo bash ./install.sh
[sudo] password for radim:
Starting to install
make -C /home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l clean
make[1]: Entering directory `/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l'
No version yet, using 3.0.0-12-generic
make[1]: Leaving directory `/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l'
make[1]: Entering directory `/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l'
rm -f *~ *.o *.ko .*.o.cmd .*.ko.cmd *.mod.c av7110_firm.h fdump \
config-compat.h Module.symvers Module.markers modules.order
make -C firmware clean
make[2]: Entering directory `/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l/firmware'
rm -f ihex2fw
rm -f vicam/firmware.fw dabusb/firmware.fw dabusb/bitstream.bin ttusb-budget/dspbootcode.bin cpia2/stv0672_vp4.bin av7110/bootcode.bin
make[2]: Leaving directory `/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l/firmware'
make -C ../v4l2-spec clean
make[2]: Entering directory `/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-spec'
rm -f *.stamp
rm -f videodev2.h.xml
rm -f capture.c.xml
rm -f v4l2grab.c.xml
rm -f capture
rm -f indices.xml entities.xml
rm -rf v4l2 v4l2-single v4l2.pdf man
find . -type l -exec rm '{}' \;
make[2]: Leaving directory `/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-spec'
make -C ../dvb-spec/dvbapi clean
make[2]: Entering directory `/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/dvb-spec/dvbapi'
rm -f *.stamp
rm -f indices.xml entities.xml
find . -type l -exec rm '{}' \;
make[2]: Leaving directory `/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/dvb-spec/dvbapi'
make -C ../v4l2-apps clean
make[2]: Entering directory `/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps'
make -C libv4l clean
make[3]: Entering directory `/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/libv4l'
rm -f *~ include/*~ DEADJOE include/DEADJOE
make -C libv4lconvert V4L2_LIB_VERSION=0.6.2-test clean
make[4]: Entering directory `/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/libv4l/libv4lconvert'
rm -f *.a *.so* *.o *.d */*.o */*.d libv4lconvert.pc log *~ */*~
rm -f *.orig *.rej */*.orig */*.rej DEADJOE */DEADJOE *-decomp
make[4]: Leaving directory `/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/libv4l/libv4lconvert'
make -C libv4l2 V4L2_LIB_VERSION=0.6.2-test clean
make[4]: Entering directory `/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/libv4l/libv4l2'
rm -f *.a *.so* *.o *.d libv4l2.pc log *~ *.orig *.rej DEADJOE
make[4]: Leaving directory `/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/libv4l/libv4l2'
make -C libv4l1 V4L2_LIB_VERSION=0.6.2-test clean
make[4]: Entering directory `/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/libv4l/libv4l1'
rm -f *.a *.so* *.o *.d libv4l1.pc log *~ *.orig *.rej DEADJOE
make[4]: Leaving directory `/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/libv4l/libv4l1'
make[3]: Leaving directory `/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/libv4l'
make -C libv4l2util clean
make[3]: Entering directory `/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/libv4l2util'
rm -f frequencies.o v4l2_driver.o libv4l2util.so libv4l2util.a
rm -f core core.[0123456789]* *~ *.o
rm -f *.d
make[3]: Leaving directory `/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/libv4l2util'
make -C util clean
make[3]: Entering directory `/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/util'
rm -f v4l2-ctl v4l2-dbg v4l2-compliance ivtv-ctl cx18-ctl v4l2-sysfs-path decode_tm6000 v4l2-chipids.cpp
if [ -f qv4l2/Makefile ]; then make -C qv4l2 clean; fi
rm -f qv4l2/qv4l2 qv4l2/Makefile
make -C xc3028-firmware clean
make[4]: Entering directory `/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/util/xc3028-firmware'
rm -f firmware-tool
rm -f core core.[0123456789]* *~ *.o
rm -f *.d
make[4]: Leaving directory `/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/util/xc3028-firmware'
rm -f v4l2-chipids.cpp
rm -rf keycodes parse.h keytable
rm -f core core.[0123456789]* *~ *.o
rm -f *.d
make[3]: Leaving directory `/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/util'
make -C test clean
make[3]: Entering directory `/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/test'
rm -f ioctl-test sliced-vbi-test sliced-vbi-detect vbi-test v4lgrab v4l2grab driver-test pixfmt-test stress-buffer capture-example
rm -f core core.[0123456789]* *~ *.o
rm -f *.d
make[3]: Leaving directory `/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps/test'
rm -f -rf include
make[2]: Leaving directory `/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l2-apps'
make[1]: Leaving directory `/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l'
make -C /home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l
make[1]: Entering directory `/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l'
scripts/make_makefile.pl
Updating/Creating .config
Preparing to compile for kernel version 3.0.0

***WARNING:*** You do not have the full kernel sources installed.
This does not prevent you from building the v4l-dvb tree if you have the
kernel headers, but the full kernel source may be required in order to use
make menuconfig / xconfig / qconfig.

If you are experiencing problems building the v4l-dvb tree, please try
building against a vanilla kernel before reporting a bug.

Vanilla kernels are available at http://kernel.org.
On most distros, this will compile a newly downloaded kernel:

cp /boot/config-`uname -r` <your kernel dir>/.config
cd <your kernel dir>
make all modules_install install

Please see your distro's web site for instructions to build a new kernel.

Created default (all yes) .config file
./scripts/make_myconfig.pl
make[1]: Leaving directory `/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l'
make[1]: Entering directory `/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l'
perl scripts/make_config_compat.pl /lib/modules/3.0.0-12-generic/build ./.myconfig ./config-compat.h
creating symbolic links...
ln -sf . oss
make -C firmware prep
make[2]: Entering directory `/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l/firmware'
make[2]: Leaving directory `/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l/firmware'
make -C firmware
make[2]: Entering directory `/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l/firmware'
  CC  ihex2fw
Generating vicam/firmware.fw
Generating dabusb/firmware.fw
Generating dabusb/bitstream.bin
Generating ttusb-budget/dspbootcode.bin
Generating cpia2/stv0672_vp4.bin
Generating av7110/bootcode.bin
make[2]: Leaving directory `/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l/firmware'
Kernel build directory is /lib/modules/3.0.0-12-generic/build
make -C /lib/modules/3.0.0-12-generic/build SUBDIRS=/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l CFLAGS="-I../linux/include -D__KERNEL__ -I/include -DEXPORT_SYMTAB" modules
make[2]: Entering directory `/usr/src/linux-headers-3.0.0-12-generic'
  CC [M]  /home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l/tuner-xc2028.o
In file included from <command-line>:0:0:
/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l/config-compat.h:4:28: fatal error: linux/autoconf.h: No such file or directory
compilation terminated.
make[3]: *** [/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l/tuner-xc2028.o] Error 1
make[2]: *** [_module_/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l] Error 2
make[2]: Leaving directory `/usr/src/linux-headers-3.0.0-12-generic'
make[1]: *** [default] Error 2
make[1]: Leaving directory `/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l'
make: *** [all] Error 2
make -C /home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l install
make[1]: Entering directory `/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l'
-e
Removing obsolete files from /lib/modules/3.0.0-12-generic/kernel/drivers/media/video:

-e
Removing obsolete files from /lib/modules/3.0.0-12-generic/kernel/drivers/media/dvb/cinergyT2:

-e
Removing obsolete files from /lib/modules/3.0.0-12-generic/kernel/drivers/media/dvb/frontends:

Installing kernel modules under /lib/modules/3.0.0-12-generic/kernel/drivers/media/:
/sbin/depmod -a 3.0.0-12-generic
make -C firmware install
make[2]: Entering directory `/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l/firmware'
Installing firmwares at /lib/firmware: vicam/firmware.fw dabusb/firmware.fw dabusb/bitstream.bin ttusb-budget/dspbootcode.bin cpia2/stv0672_vp4.bin av7110/bootcode.bin
make[2]: Leaving directory `/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l/firmware'
make[1]: Leaving directory `/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l'
Installation Done
Tuner jsem dal do USB, žádná reakce a Tvme píše žádné zařízení.

Nemůžu být problém v tom, že Ubuntu tento typ karty nepodporuje?

Název: Re:Tv tuner Gigabyte 7300
Přispěvatel: petertomasy 12 Listopadu 2011, 17:45:30

Citace

/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l/config-compat.h:4:28: fatal error: linux/autoconf.h: No such file or directory
compilation terminated.
make[3]: *** [/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l/tuner-xc2028.o] Error 1
make[2]: *** [_module_/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l] Error 2
make[2]: Leaving directory `/usr/src/linux-headers-3.0.0-12-generic'
make[1]: *** [default] Error 2
make[1]: Leaving directory `/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l'
make: *** [all] Error 2

malo by ti pomôcť asi toto:

Citace

/home/Software/EzyCap/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l/config-compat .h:4:28:
 > fatal error: linux/autoconf.h: No such file or directory
 > compilation terminated.
 >
 yes , the autoconf.h file is now in generated directory in the new
 linux kernel, and I the
 driver for linux is written for old kernel . So , just go into the
 config-compat.h
 and then change all the linux/autoconf.h to generated/autoconf.h ,
 then build it again

teda po slovensky niečo ako:
zmeniť v súbore "config-compact.h v riadku 4 celý.

Kód: [Vybrat]

linux/autoconf.h # vymazať   
generated/autoconf.h   # prepísať  a preveď compiláciu odznova.
je to preto , že driver je písaný pre staršie jadrá.

Název: Re:Tv tuner Gigabyte 7300
Přispěvatel: radimk 12 Listopadu 2011, 18:35:20

Citace: petertomasy  12 Listopadu 2011, 17:45:30

Citace

/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l/config-compat.h:4:28: fatal error: linux/autoconf.h: No such file or directory
compilation terminated.
make[3]: *** [/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l/tuner-xc2028.o] Error 1
make[2]: *** [_module_/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l] Error 2
make[2]: Leaving directory `/usr/src/linux-headers-3.0.0-12-generic'
make[1]: *** [default] Error 2
make[1]: Leaving directory `/home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l'
make: *** [all] Error 2

malo by ti pomôcť asi toto:

Citace

/home/Software/EzyCap/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l/config-compat .h:4:28:
 > fatal error: linux/autoconf.h: No such file or directory
 > compilation terminated.
 >
 yes , the autoconf.h file is now in generated directory in the new
 linux kernel, and I the
 driver for linux is written for old kernel . So , just go into the
 config-compat.h
 and then change all the linux/autoconf.h to generated/autoconf.h ,
 then build it again

teda po slovensky niečo ako:
zmeniť v súbore "config-compact.h v riadku 4 celý.

Kód: [Vybrat]

linux/autoconf.h # vymazať   
generated/autoconf.h   # prepísať  a preveď compiláciu odznova.
je to preto , že driver je písaný pre staršie jadrá.

Krapet se ztrácim.  ::)
A jak ten soubor najdu? Je v terminálu, na disku, nebo v ovládačích, které budu instalovat?

Název: Re:Tv tuner Gigabyte 7300
Přispěvatel: petertomasy 12 Listopadu 2011, 18:53:39

Kód: [Vybrat]

gedit /home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l/config-compat.h    nalistuj riadok č.4 a zameniť "linux/autoconf.h za generated/autoconf.h , uložiť a ísť odznova...

Název: Re:Tv tuner Gigabyte 7300
Přispěvatel: radimk 12 Listopadu 2011, 19:27:53

Citace: petertomasy  12 Listopadu 2011, 18:53:39

Kód: [Vybrat]

gedit /home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l/config-compat.h    nalistuj riadok č.4 a zameniť "linux/autoconf.h za generated/autoconf.h , uložiť a ísť odznova...

použil jsem v terminálu cestu gedit /home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l/config-compat.h, ubuntu mi otevřelo soubor v textovém editoru a soubor je prázdný. díval jsem se do adresáře V4l a soubor config-compat.h jsem nenašel

Název: Re:Tv tuner Gigabyte 7300
Přispěvatel: petertomasy 12 Listopadu 2011, 20:22:18

aha, tak teda použijeme klasiku:

Kód: [Vybrat]

cd /home/radim/Dokumenty/LinuxDriver
tar -jxv -f v4l_rtl2832_install.tar.bz2
cd v4l-dvb-b88d4f790cd6
make # vypíše chybu error
gedit /home/radim/Dokumenty/LinuxDriver/v4l_rtl2832_install/v4l-dvb-b88d4f790cd6/v4l/config-compat.h # upraviť  a opakovať
make
sudo make install
sudo reboot
edit : ten súbor install.sh automaticky po ukončení,  a teda aj po chybe všetko vymaže .

Citace

rm -rf $TMP_DIR

tak teda nemaš možnosť ten subor upraviť .

Název: Re:Tv tuner Gigabyte 7300
Přispěvatel: Rover623 13 Listopadu 2011, 20:57:36

Tak bych prostě tohle "rm -rf $TMP_DIR" z toho souboru install.sh odebral, pak to tam zůstane a provést to lze dodatečně ručně