Fórum Ubuntu CZ/SK
Ubuntu pro osobní počítače => Hardware => Téma založeno: JS 16 Února 2013, 17:49:06
-
Zdravim
Koupil jsem si druhy tenhle tuner z aukra, ale ouha ma jiny cip. V prvnim mam AF9015 a vse bez problemu.
Jak ale zprovoznit tenhle s IT9135?
Je mi tu nekolik veci zahadou. Pridavam informaci ze mam 12.04
1. Dle tohodle http://linuxtv.org/wiki/index.php/ITE_IT9135 (http://linuxtv.org/wiki/index.php/ITE_IT9135) by mel byt normalne podporavan od jadra 3.4. Zkousel jsem to i na 12.10 s jadrem 3.5, ale nic. Pres Additional drivers jsem aktivoval firmware ale nic. Slozka /dev/dvb neexistuje.
2. Na te strance je uvedeno ze to chce firmware dvb-usb-it9135-02.fw, ale dmesg pise ze nemuze najit dvb-usb-it9137-01.fw?!
3. I kdyz aktivuji pres pridavne ovladace firmware pro dvb-t karty tak v /lib/firmware nevypada ze by byl firmware ktery by mel v nazvu it913x.
Pomuze mi prosim nekdo se zprovoznenim tohodle tuneru. Je celkem jedno jestli pod Ubuntu/Lubuntu 12.04 (uprednostnuji) nebo 12.10.
Prikladam vypis lsusb a cast vypisu dmesg.
Predem dekuji.
lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 048d:9135 Integrated Technology Express, Inc. Zolid Mini DVB-T Stick
dmesg
[ 14.562045] it913x: Chip Version=02 Chip Type=9135
[ 14.564733] IR NEC protocol handler initialized
[ 14.564797] it913x: Dual mode=0 Remote=5 Tuner Type=7b
[ 14.566359] IR RC5(x) protocol handler initialized
[ 14.566571] dvb-usb: found a 'ITE 9135 Generic' in cold state, will try to load a firmware
[ 14.569774] IR RC6 protocol handler initialized
[ 14.571615] IR JVC protocol handler initialized
[ 14.574122] IR Sony protocol handler initialized
[ 14.576739] IR MCE Keyboard/mouse protocol handler initialized
[ 14.579385] lirc_dev: IR Remote Control driver registered, major 250
[ 14.579523] IR LIRC bridge handler initialized
[ 14.581625] dvb-usb: did not find the firmware file. (dvb-usb-it9137-01.fw) Please see linux/Documentation/dvb/ for more details on firmware-problems. (-2)
[ 14.581629] it913x: DEV it913x Error
[ 14.581777] usbcore: registered new interface driver it913x
[ 14.619072] init: failsafe main process (709) killed by TERM signal
-
from 3.3
dvb-usb-it9135-01.fw
Kernel 3.2 uses
dvb-usb-it9137-01.fw
to píšu na té stránce ...
predpokladám ,že 12.04 má kernel 3.2.x, takže potrebuješ firmware dvb-usb-it9137-01.fw. ten si stiahneš z netu napr. takto :wget https://raw.github.com/torvalds/linux/master/Documentation/dvb/get_dvb_firmware
perl get_dvb_firmware it9137 a nasledne ho skopírovať s pravami roota do /lib/firmware.
-
from 3.3
dvb-usb-it9135-01.fw
Kernel 3.2 uses
dvb-usb-it9137-01.fw
to píšu na té stránce ...
predpokladám ,že 12.04 má kernel 3.2.x, takže potrebuješ firmware dvb-usb-it9137-01.fw. ten si stiahneš z netu napr. takto :wget https://raw.github.com/torvalds/linux/master/Documentation/dvb/get_dvb_firmware
perl get_dvb_firmware it9137 a nasledne ho skopírovať s pravami roota do /lib/firmware.
Tak jsem to provedl ale Kaffeine porad pise Device not found. Chybi /dev/dvb
Delal jsem to na 12.04.
-
tak ukaž dmesg, čo vypíše ...
-
tak ukaž dmesg, čo vypíše ...
Moc dekuji. Uz tam asi neni ta chyba s firmwarem.
[ 0.450789] Registering the dns_resolver key type
[ 0.450885] PM: Hibernation image not present or could not be loaded.
[ 0.450895] registered taskstats version 1
[ 0.455696] Magic number: 1:870:946
[ 0.455741] tty tty3: hash matches
[ 0.455789] rtc_cmos 00:04: setting system clock to 2013-02-16 17:55:19 UTC (1361037319)
[ 0.456509] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.456510] EDD information not available.
[ 0.462751] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.592417] ata2.00: ATAPI: TSSTcorp CDDVDW SH-S202N, SB01, max UDMA/66
[ 0.592508] ata1.00: ATA-7: SAMSUNG HD502IJ, 1AA01113, max UDMA7
[ 0.592511] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.600292] ata1.00: configured for UDMA/133
[ 0.600425] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5
[ 0.600580] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 0.600613] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.600649] sd 0:0:0:0: [sda] Write Protect is off
[ 0.600651] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.600668] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.608184] ata2.00: configured for UDMA/66
[ 0.609115] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S202N SB01 PQ: 0 ANSI: 5
[ 0.611611] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.611615] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.611750] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 0.611862] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 0.638589] sda: sda1 sda2 < sda5 sda6 >
[ 0.638925] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.640173] Freeing unused kernel memory: 924k freed
[ 0.640384] Write protecting the kernel read-only data: 12288k
[ 0.644600] Freeing unused kernel memory: 1604k freed
[ 0.648123] Freeing unused kernel memory: 1196k freed
[ 0.660244] udevd[89]: starting version 175
[ 0.715962] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.715982] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.716056] r8169 0000:02:00.0: setting latency timer to 64
[ 0.716135] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
[ 0.716682] r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xffffc9000064e000, 1c:6f:65:53:71:51, XID 083000c0 IRQ 42
[ 0.716685] r8169 0000:02:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 0.719606] firewire_ohci 0000:03:07.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.738929] Floppy drive(s): fd0 is 1.44M
[ 0.755856] FDC 0 is a post-1991 82077
[ 0.760029] usb 1-8: new high-speed USB device number 2 using ehci_hcd
[ 0.772061] firewire_ohci: Added fw-ohci device 0000:03:07.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 0.997278] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.248020] Refined TSC clocksource calibration: 2933.437 MHz.
[ 1.248027] Switching to clocksource tsc
[ 1.272125] firewire_core: created device fw0: GUID 0022c400006cf049, S400
[ 13.861188] Adding 9763836k swap on /dev/sda6. Priority:-1 extents:1 across:9763836k
[ 13.866557] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.905066] udevd[390]: starting version 175
[ 13.953401] lp: driver loaded but no devices found
[ 13.954289] [drm] Initialized drm 1.1.0 20060810
[ 13.964423] type=1400 audit(1361037333.006:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=436 comm="apparmor_parser"
[ 13.964738] type=1400 audit(1361037333.006:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=436 comm="apparmor_parser"
[ 13.964919] type=1400 audit(1361037333.006:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=436 comm="apparmor_parser"
[ 13.967541] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.967547] i915 0000:00:02.0: setting latency timer to 64
[ 14.000615] intel_rng: FWH not detected
[ 14.015363] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 14.015367] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 14.040599] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[ 14.040605] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 14.040607] [drm] Driver supports precise vblank timestamp query.
[ 14.040640] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 14.045924] leds_ss4200: no LED devices found
[ 14.059528] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 14.135422] IR NEC protocol handler initialized
[ 14.136559] IR RC5(x) protocol handler initialized
[ 14.160816] IR RC6 protocol handler initialized
[ 14.166319] IR JVC protocol handler initialized
[ 14.181668] IR Sony protocol handler initialized
[ 14.238994] IR MCE Keyboard/mouse protocol handler initialized
[ 14.242845] lirc_dev: IR Remote Control driver registered, major 250
[ 14.243652] IR LIRC bridge handler initialized
[ 14.283086] RPC: Registered named UNIX socket transport module.
[ 14.283089] RPC: Registered udp transport module.
[ 14.283090] RPC: Registered tcp transport module.
[ 14.283092] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 14.284600] FS-Cache: Loaded
[ 14.296187] FS-Cache: Netfs 'nfs' registered for caching
[ 14.308225] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 14.333685] it913x: Chip Version=69 Chip Type=2073
[ 14.418210] init: failsafe main process (753) killed by TERM signal
[ 14.507570] ppdev: user-space parallel port driver
[ 14.574346] Bluetooth: Core ver 2.16
[ 14.574379] NET: Registered protocol family 31
[ 14.574381] Bluetooth: HCI device and connection manager initialized
[ 14.574383] Bluetooth: HCI socket layer initialized
[ 14.574385] Bluetooth: L2CAP socket layer initialized
[ 14.574752] Bluetooth: SCO socket layer initialized
[ 14.593855] type=1400 audit(1361037333.634:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=896 comm="apparmor_parser"
[ 14.594264] type=1400 audit(1361037333.634:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=896 comm="apparmor_parser"
[ 14.600224] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 14.600227] Bluetooth: BNEP filters: protocol multicast
[ 14.603705] Bluetooth: RFCOMM TTY layer initialized
[ 14.603711] Bluetooth: RFCOMM socket layer initialized
[ 14.603713] Bluetooth: RFCOMM ver 1.11
[ 14.619862] fbcon: inteldrmfb (fb0) is primary device
[ 14.620299] Console: switching to colour frame buffer device 160x64
[ 14.620325] fb0: inteldrmfb frame buffer device
[ 14.620326] drm: registered panic notifier
[ 14.620681] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 14.620721] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.620781] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 14.620803] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 14.625552] type=1400 audit(1361037333.666:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=921 comm="apparmor_parser"
[ 14.629041] type=1400 audit(1361037333.670:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=921 comm="apparmor_parser"
[ 14.629227] type=1400 audit(1361037333.670:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=921 comm="apparmor_parser"
[ 14.636102] type=1400 audit(1361037333.678:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=920 comm="apparmor_parser"
[ 14.658640] type=1400 audit(1361037333.698:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=924 comm="apparmor_parser"
[ 14.693684] hda_codec: ALC888: BIOS auto-probing.
[ 14.696958] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 14.702492] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3
[ 14.702602] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[ 14.702691] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 14.702780] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 14.702869] input: HDA Intel Line-Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 14.702956] input: HDA Intel Line-Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 14.703042] input: HDA Intel Line-Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 14.703134] input: HDA Intel Line-Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 14.703222] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 14.708493] HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 14.708539] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 14.711241] HDMI: detected monitor SONY TV at connection type HDMI
[ 14.711242] HDMI: available speakers: FL/FR
[ 14.711245] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[ 14.711248] HDMI: supports coding type AC-3: channels = 6, rates = 32000 44100 48000, max bitrate = 640000
[ 14.733903] r8169 0000:02:00.0: eth0: link down
[ 14.733911] r8169 0000:02:00.0: eth0: link down
[ 14.738541] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.739507] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.828524] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input12
[ 15.132164] it913x: Dual mode=ed Remote=ed Tuner Type=ed
[ 15.230190] vboxdrv: Found 2 processor cores.
[ 15.230862] vboxdrv: fAsync=0 offMin=0x1a2 offMax=0x7c7
[ 15.230921] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 15.230922] vboxdrv: Successfully loaded version 4.1.12_Ubuntu (interface 0x00190000).
[ 15.242976] vboxpci: IOMMU not found (not registered)
[ 16.084152] HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=1
[ 16.084211] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 16.156064] HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 16.156120] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 16.158829] HDMI: detected monitor SONY TV at connection type HDMI
[ 16.158831] HDMI: available speakers: FL/FR
[ 16.158834] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[ 16.158836] HDMI: supports coding type AC-3: channels = 6, rates = 32000 44100 48000, max bitrate = 640000
[ 17.044149] dvb-usb: found a 'ITE 9135 Generic' in cold state, will try to load a firmware
[ 17.053033] dvb-usb: downloading firmware from file 'dvb-usb-it9137-01.fw'
[ 17.256155] it913x: FRM Starting Firmware Download
[ 17.328749] r8169 0000:02:00.0: eth0: link up
[ 17.329135] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 17.418170] HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=1
[ 17.418229] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 27.552011] eth0: no IPv6 routers present
[ 37.760023] it913x: FRM Firmware Download Failed (ffffffed)
[ 37.960907] it913x: Chip Version=75 Chip Type=0203
[ 39.396133] it913x: DEV it913x Error
[ 39.396448] usbcore: registered new interface driver it913x
-
Na konci si všimni co to píše.
Bude třeba buď jiný firmware pro kernel 3.2 nebo celkově novější utilitky. Viz:
http://forum.ubuntuusers.de/topic/fernseh-schauen-und-aufnehmen-unter-ubuntu/3/ (http://forum.ubuntuusers.de/topic/fernseh-schauen-und-aufnehmen-unter-ubuntu/3/)
http://linuxtv.org/wiki/index.php/ITE_IT9135 (http://linuxtv.org/wiki/index.php/ITE_IT9135)
Polský návod s anglickými příkazy.
http://damiango.wordpress.com/2012/06/ (http://damiango.wordpress.com/2012/06/)
Umíš anglicky?
-
Bude třeba buď jiný firmware pro kernel 3.2 nebo celkově novější utilitky. Viz:
http://forum.ubuntuusers.de/topic/fernseh-schauen-und-aufnehmen-unter-ubuntu/3/ (http://forum.ubuntuusers.de/topic/fernseh-schauen-und-aufnehmen-unter-ubuntu/3/)
http://linuxtv.org/wiki/index.php/ITE_IT9135 (http://linuxtv.org/wiki/index.php/ITE_IT9135)
http://damiango.wordpress.com/2012/06/ (http://damiango.wordpress.com/2012/06/)
Umíš anglicky?
No s anglictinou si moc netykam. Rusky by neco nebylo :-)
Ale ten polsky navod mozna zvladnu.
Mam ho zkusit nebo mi radsi poradis postup?
Dik
Edit: takze koukam ze ten polsky navod je na verzi chipu 1 a ja mam 2...to asi nebude ono
-
No z té verze čipu jsem taky jelen.
-
No z té verze čipu jsem taky jelen.
No prave ja taky. :-)
-
Mně tu trvá načtení stránek i minuty. Vytížená linka :-)
Jestli máš verzi 2, tak ta je podporována až od kernelu 3.4, takže z repozitáře nainstaluj 3 balíky jako má Tibor zde:
http://forum.ubuntu.cz/index.php?topic=66759.msg476816#msg476816 (http://forum.ubuntu.cz/index.php?topic=66759.msg476816#msg476816)
Potom stáhni firmware dvb-usb-it9135-02.fw a mělo by to chodit. Když nebude, postni zase dmesg.
-
Mně tu trvá načtení stránek i minuty. Vytížená linka :-)
Jestli máš verzi 2, tak ta je podporována až od kernelu 3.4, takže z repozitáře nainstaluj 3 balíky jako má Tibor zde:
http://forum.ubuntu.cz/index.php?topic=66759.msg476816#msg476816 (http://forum.ubuntu.cz/index.php?topic=66759.msg476816#msg476816)
Potom stáhni firmware dvb-usb-it9135-02.fw a mělo by to chodit. Když nebude, postni zase dmesg.
Myslis asi jen ten spodni obrazek ze?
-
Ano. Jen ty tři balíky začínající linux.
Teoreticky však by měli stačit i tři spodní balíky z horního obrázku, které by měly zajistit plynulou aktualizaci na v budoucnu vydané verze kernelu a též nainstalovat shodné 3 balíky.
Snad jsem tě moc nezmátl :-)
Balík linux-image reprezentují jádro zaváděné při startu. A vedlejší balíky, které mají pomocnou funkci.
-
Ano. Jen ty tři balíky začínající linux.
Teoreticky však by měli stačit i tři spodní balíky z horního obrázku, které by měly zajistit plynulou aktualizaci na v budoucnu vydané verze kernelu a též nainstalovat shodné 3 balíky.
Snad jsem tě moc nezmátl :-)
Balík linux-image reprezentují jádro zaváděné při startu. A vedlejší balíky, které mají pomocnou funkci.
Tak jsem pres prikaz dd vypreparoval ten firmware xxxxx-02.fw a kopnul ho do /lib/firmare.
Vypada ze se to rozjelo!!! :-)
V kaffeine uz ho vidim a vytvoril se i adresar /dev/dvb/. Ted probiha ladeni. Uz to naslo i nejake stanice.
Musim rici ze oproti tomu prvnimu s AF9013 je ladeni pomale a i tuner se mi zda mene citlivy.
To ladeni je fakt des. V kaffeine to spadlo tak jsem nainstalil dvb-apps a spustil scan pro cz-all. Zatim co s tim AF9013 to je do max. peti minut (v kaffeine jeste rychleji) tak ted to trva uz 10 minut a do konce jeste hodne chybi.
Myslis ze ten firmware jak jsem ho vypreparoval je optimalni?
-
To nevím. Zkus ladit v Kaffeine ne na cz předvolbu, ale automatické prohledávání. Je to druhé z vrchu.
-
To nevím. Zkus ladit v Kaffeine ne na cz předvolbu, ale automatické prohledávání. Je to druhé z vrchu.
Tak jsem zkusil dat to automaticke ladeni. Ale ladi to nejak divne. Viditelne tam nekolikrat naskocil signal, ale nerozpoznal sluzby. Je zajimave ze vyhledal sluzby jen u stanic s nizkym signalem.
Zkusim jeste to cz_all.
-
Takze rozchozeno. S jadrem 3.5 to jeste nechodi jak ma. Nenaladi to nektere multiplexy. Asi jeste neni dobry ovladac. Udelal jsem upgrade na jadro 3.8 a tam uz to beha bez problemu. Nutno pouze do /lib/firmware nahrat spravny firmware. Pozor na verzi chipu it9135.
Viz. http://linuxtv.org/wiki/index.php/ITE_IT9135
Vsem zucastnenym dekuji za pomoc.
Mozno oznacit za vyreseno.