Fórum Ubuntu CZ/SK

Ubuntu pro osobní počítače => Internet a sítě => Téma založeno: Pit.ja 09 Listopadu 2013, 11:14:48

Název: HP 650, RT3290 Wireless 802.11n, disfunkční [vyřešeno]
Přispěvatel: Pit.ja 09 Listopadu 2013, 11:14:48: zdravím, mám začátečnický dotaz.
pravděpodobně při pokusu i nainstalování iTunes (po nainstalování playonlinux) mi přestala fungovat wifina. po přečtení několika diskusí a několika pokusech o zjištění problému jsem dospěl k názoru, že se mi asi podařilo zbavit se ovladačů pro RT3290 Wireless 802.11n
poradí mi někdo kde je najdu, jakým způsobem nainstaluju a zprovozním bezdrátové připojení?
nerad bych se vracel zpět k woknům, protože celá filosofie linuxů se mi jako pirátovi líbí daleko víc... :)
Název: Re:HP 650, RT3290 Wireless 802.11n, disfunkční
Přispěvatel: RRRadek Neužil 09 Listopadu 2013, 11:22:51: Otevři terminál a zadej do něj následující příkazy a pošli nám co ti to píše.
Kód: [Vybrat]
rfkill list
Kód: [Vybrat]
lspci -vv
Název: Re:HP 650, RT3290 Wireless 802.11n, disfunkční
Přispěvatel: Pit.ja 09 Listopadu 2013, 11:34:23: Kód: [Vybrat]
pit@pit-HP:~$ rfkill list 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no 1: hp-bluetooth: Bluetooth Soft blocked: no Hard blocked: no 2: hci0: Bluetooth Soft blocked: no Hard blocked: no pit@pit-HP:~$ lspci -vv 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) Subsystem: Hewlett-Packard Company Device 1858 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device 1858 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 43 Region 0: Memory at 52000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at 40000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 4000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04) Subsystem: Hewlett-Packard Company Device 1858 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 42 Region 0: Memory at 52604000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device 1858 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at 52609000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04) Subsystem: Hewlett-Packard Company Device 1858 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at 52600000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00003000-00003fff Prefetchable memory behind bridge: 0000000052400000-00000000524fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: 52500000-525fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=08, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: 51000000-51ffffff Prefetchable memory behind bridge: 0000000050000000-0000000050ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device 1858 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at 52608000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge: Intel Corporation 7 Series Chipset Family LPC Controller (rev 04) Subsystem: Hewlett-Packard Company Device 1858 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0]) Subsystem: Hewlett-Packard Company Device 1858 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 40 Region 0: I/O ports at 4088 [size=8] Region 1: I/O ports at 4094 [size=4] Region 2: I/O ports at 4080 [size=8] Region 3: I/O ports at 4090 [size=4] Region 4: I/O ports at 4060 [size=32] Region 5: Memory at 52607000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04) Subsystem: Hewlett-Packard Company Device 1858 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 10 Region 0: Memory at 52605000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 4040 [size=32] Kernel modules: i2c-i801 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 07) Subsystem: Hewlett-Packard Company Device 1858 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 41 Region 0: I/O ports at 3000 [size=256] Region 2: Memory at 52404000 (64-bit, prefetchable) [size=4K] Region 4: Memory at 52400000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 02:00.0 Network controller: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe Subsystem: Hewlett-Packard Company Device 18ec Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at 52510000 (32-bit, non-prefetchable) [size=64K] Capabilities: <access denied> 02:00.1 Bluetooth: Ralink corp. RT3290 Bluetooth Subsystem: Hewlett-Packard Company Device 18ec Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at 52500000 (32-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: rtbt Kernel modules: rtbth 03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01) Subsystem: Hewlett-Packard Company Device 1858 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at 51000000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: rts5229 Kernel modules: rts5229
Název: Re:HP 650, RT3290 Wireless 802.11n, disfunkční
Přispěvatel: RRRadek Neužil 09 Listopadu 2013, 11:47:57: Kód: [Vybrat]
sudo apt-get update && sudo apt-get install build-essential linux-headers-generic -y
Kód: [Vybrat]
wget http://dl.dropbox.com/u/11876059/DPO_RT3290_LinuxSTA_V2600_20120508.tar.gzpokud by nešel stáhnou tak pro jistotu přikládám do přílohy...
Kód: [Vybrat]
tar -xvf DPO_RT3290_LinuxSTA_V2600_20120508.tar.gz
Kód: [Vybrat]
cd ~/DPO_RT3290_LinuxSTA_V2600_20120508
Kód: [Vybrat]
sudo makePokud nějaký error tak nepokračuj a dej nám to sem, pokud bez error tak
Kód: [Vybrat]
sudo make install
Kód: [Vybrat]
sudo modprobe rt3290staFunguje?

EDIT: návod poupraven aby fungoval na poprvé ;)

[příloha smazaná administrátorem]
Název: Re:HP 650, RT3290 Wireless 802.11n, disfunkční
Přispěvatel: Pit.ja 09 Listopadu 2013, 12:10:20: hodilo mi to toto...

Kód: [Vybrat]
WARNING: modpost: missing MODULE_LICENSE() in /home/pit/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/rt3290sta.o see include/linux/module.h for more information CC /home/pit/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/rt3290sta.mod.o LD [M] /home/pit/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/rt3290sta.ko make[1]: Leaving directory `/usr/src/linux-headers-3.2.0-56-generic' cp -f /home/pit/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/rt3290sta.ko /tftpboot cp: nelze vytvořit obyčejný soubor „/tftpboot“: Operace zamítnuta make: *** [LINUX] Error 1 pit@pit-HP:~/DPO_RT3290_LinuxSTA_V2600_20120508$ ^C pit@pit-HP:~/DPO_RT3290_LinuxSTA_V2600_20120508$
Název: Re:HP 650, RT3290 Wireless 802.11n, disfunkční
Přispěvatel: RRRadek Neužil 09 Listopadu 2013, 12:16:27: Co máš za Ubuntu? Na 12.04 by to mělo jít. :-\
Název: Re:HP 650, RT3290 Wireless 802.11n, disfunkční
Přispěvatel: Pit.ja 09 Listopadu 2013, 12:22:32: 12.04 LTE mi to ukazuje v informacích o systému...
není možné, že jsem udělal někde chybu? nevím, napadá mne, že jsem měl otevřeného správce dodatečných ovladačů... tím to být nemůže?
Název: Re:HP 650, RT3290 Wireless 802.11n, disfunkční
Přispěvatel: petertomasy 09 Listopadu 2013, 12:28:21: Citace
cp: nelze vytvořit obyčejný soubor „/tftpboot“: Operace zamítnuta
musíš byť root ...
Název: Re:HP 650, RT3290 Wireless 802.11n, disfunkční
Přispěvatel: RRRadek Neužil 09 Listopadu 2013, 12:28:53: Zkus místo samotného make, sudo make.
Název: Re:HP 650, RT3290 Wireless 802.11n, disfunkční
Přispěvatel: Pit.ja 09 Listopadu 2013, 12:31:07: nerozumím "musíš být root" sorry, jsem zatím pouhý uživatel ;)
Název: Re:HP 650, RT3290 Wireless 802.11n, disfunkční
Přispěvatel: RRRadek Neužil 09 Listopadu 2013, 12:34:34: Citace: Pit.ja 09 Listopadu 2013, 12:31:07
nerozumím "musíš být root" sorry, jsem zatím pouhý uživatel ;)
Kód: [Vybrat]
sudo make *censored*
Název: Re:HP 650, RT3290 Wireless 802.11n, disfunkční
Přispěvatel: Pit.ja 09 Listopadu 2013, 12:36:53: po "sudo make" :

Kód: [Vybrat]
cp: nelze vytvořit obyčejný soubor „/tftpboot“: Operace zamítnuta make: *** [LINUX] Error 1 pit@pit-HP:~/DPO_RT3290_LinuxSTA_V2600_20120508$ ^C pit@pit-HP:~/DPO_RT3290_LinuxSTA_V2600_20120508$ sudo make [sudo] password for pit: Sorry, try again. [sudo] password for pit: sudo: 1 incorrect password attempt pit@pit-HP:~/DPO_RT3290_LinuxSTA_V2600_20120508$ sudo make [sudo] password for pit: make -C tools make[1]: Entering directory `/home/pit/DPO_RT3290_LinuxSTA_V2600_20120508/tools' gcc -g bin2h.c -o bin2h make[1]: Leaving directory `/home/pit/DPO_RT3290_LinuxSTA_V2600_20120508/tools' /home/pit/DPO_RT3290_LinuxSTA_V2600_20120508/tools/bin2h cp -f os/linux/Makefile.6 /home/pit/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/Makefile make -C /lib/modules/3.2.0-56-generic/build SUBDIRS=/home/pit/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux modules make[1]: Entering directory `/usr/src/linux-headers-3.2.0-56-generic' CC [M] /home/pit/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../common/rtmp_mcu.o /home/pit/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../common/rtmp_mcu.c: In function ‘RtmpAsicSendCommandToMcu’: /home/pit/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../common/rtmp_mcu.c:464:8: warning: unused variable ‘offset’ [-Wunused-variable] /home/pit/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../common/rtmp_mcu.c:463:8: warning: unused variable ‘Configuration’ [-Wunused-variable] LD [M] /home/pit/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/rt3290sta.o Building modules, stage 2. MODPOST 1 modules WARNING: modpost: missing MODULE_LICENSE() in /home/pit/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/rt3290sta.o see include/linux/module.h for more information LD [M] /home/pit/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/rt3290sta.ko make[1]: Leaving directory `/usr/src/linux-headers-3.2.0-56-generic' cp -f /home/pit/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/rt3290sta.ko /tftpboot pit@pit-HP:~/DPO_RT3290_LinuxSTA_V2600_20120508$
jak mam teda pokracovat?
Název: Re:HP 650, RT3290 Wireless 802.11n, disfunkční
Přispěvatel: petertomasy 09 Listopadu 2013, 12:44:44: 100 %
Název: Re:HP 650, RT3290 Wireless 802.11n, disfunkční
Přispěvatel: RRRadek Neužil 09 Listopadu 2013, 12:47:41: Citace: Pit.ja 09 Listopadu 2013, 12:36:53
jak mam teda pokracovat?

Citace: RRadek Neužil 09 Listopadu 2013, 11:47:57
Kód: [Vybrat]
sudo make install
Kód: [Vybrat]
sudo modprobe rt3290staFunguje?
Název: Re:HP 650, RT3290 Wireless 802.11n, disfunkční
Přispěvatel: Pit.ja 09 Listopadu 2013, 12:56:17: Kód: [Vybrat]
pit@pit-HP:~/DPO_RT3290_LinuxSTA_V2600_20120508$ sudo make install [sudo] password for pit: make -C /home/pit/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux -f Makefile.6 install mkdir: adresář „/etc/Wireless“ nelze vytvořit: Soubor již existuje make[1]: Entering directory `/home/pit/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux' rm -rf /etc/Wireless/RT2860STA mkdir /etc/Wireless/RT2860STA cp /home/pit/DPO_RT3290_LinuxSTA_V2600_20120508/RT2860STA.dat /etc/Wireless/RT2860STA/. install -d /lib/modules/3.2.0-56-generic/kernel/drivers/net/wireless/ install -m 644 -c rt3290sta.ko /lib/modules/3.2.0-56-generic/kernel/drivers/net/wireless/ /sbin/depmod -a 3.2.0-56-generic make[1]: Leaving directory `/home/pit/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux' pit@pit-HP:~/DPO_RT3290_LinuxSTA_V2600_20120508$ sudo modprobe rt3290sta pit@pit-HP:~/DPO_RT3290_LinuxSTA_V2600_20120508$
zatim podle moznosti pripojeni v horni liste to vypada, ze pujde... jdu to vyzkouset ;-)
Název: Re:HP 650, RT3290 Wireless 802.11n, disfunkční
Přispěvatel: Pit.ja 09 Listopadu 2013, 12:59:29: pane Neužil, potlesk největší!!! tohle bych sám nedal dokupy...
díky moc, zachránili jste mne před zběhnutím do spárů Microsoftu ;-)
Název: Re:HP 650, RT3290 Wireless 802.11n, disfunkční
Přispěvatel: RRRadek Neužil 09 Listopadu 2013, 13:12:03: Citace: Pit.ja 09 Listopadu 2013, 11:14:48
nerad bych se vracel zpět k woknům...

Příště bez tohoto prosím ;)
Název: Re:HP 650, RT3290 Wireless 802.11n, disfunkční [vyřešeno]
Přispěvatel: Pit.ja 09 Listopadu 2013, 13:15:34: beru na vědomí ;)
Název: Re:HP 650, RT3290 Wireless 802.11n, nefunkční wifi
Přispěvatel: finuchy 09 Prosince 2013, 01:20:38: Dobrý den,
mám také ntb HP 650. Ze začátku ubuntu bylo fajn, ale pak se něco pokazilo. Nevím co přesně, ale ntb nešel spustit. Tak jsem si řekl, že nahraju wokna. No, i na ně došlo a chtěl bych se teď vrátit na ubuntu.
Po instalaci 12.04 LTS, dle Vašeho návoduna instalaci wifi mi ntb zamrzal a hlásil chybu v kernelu. Jsem amatér, tak neřeknu víc.
Dá se tento problém nějak odstranit?
Děkuji.
Název: Re:HP 650, RT3290 Wireless 802.11n, disfunkční [vyřešeno]
Přispěvatel: RRRadek Neužil 09 Prosince 2013, 18:34:15: A máte naprosto stejnou Wifi modul? To že máte třeba stejný ntb HP 650 neznamená že máte i stejnou wifi.
Název: Re:HP 650, RT3290 Wireless 802.11n, disfunkční [vyřešeno]
Přispěvatel: Desolator 16 Ledna 2014, 11:21:20: Ahoj.
Mám podobný problém s ovladači RT3290 RaLink. WiFi funguje, ale Bluetooth ne. Ubuntu 13.10 Pokoušel jsem se o stažení a kompilaci.
Sudo make hlásil chyby, přikládám výpisy.
Prosím o radu.
Děkuji.

lscpi
Kód: [Vybrat]
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c) 04:00.0 Network controller: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe 04:00.1 Bluetooth: Ralink corp. RT3290 Bluetoothrfkill
Kód: [Vybrat]
lak@lak-notes:~$ sudo rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no
sudo make
Kód: [Vybrat]
from include/linux/time.h:5, from include/linux/stat.h:18, from include/linux/module.h:10, from /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/include/os/rt_linux.h:18, from /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/include/rtmp_os.h:42, from /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/include/rtmp_comm.h:56, from /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../os/linux/rt_linux.c:35: /usr/src/linux-headers-3.11.0-15-generic/arch/x86/include/asm/string_64.h:58:7: note: expected ‘void *’ but argument is of type ‘sk_buff_data_t’ void *memmove(void *dest, const void *src, size_t count); ^ /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../os/linux/rt_linux.c: In function ‘ClonePacket’: /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../os/linux/rt_linux.c:662:20: warning: assignment makes integer from pointer without a cast [enabled by default] pClonedPkt->tail = pClonedPkt->data + pClonedPkt->len; ^ In file included from /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/include/rtmp_os.h:42:0, from /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/include/rtmp_comm.h:56, from /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../os/linux/rt_linux.c:35: /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../os/linux/rt_linux.c: In function ‘RtmpOsPktInit’: /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/include/os/rt_linux.h:992:34: warning: assignment makes integer from pointer without a cast [enabled by default] ((RTPKT_TO_OSPKT(_pkt))->tail) = (PUCHAR)((_start) + (_len)) ^ /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../os/linux/rt_linux.c:681:2: note: in expansion of macro ‘SET_OS_PKT_DATATAIL’ SET_OS_PKT_DATATAIL(pRxPkt, pData, DataSize); ^ /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../os/linux/rt_linux.c: In function ‘wlan_802_11_to_802_3_packet’: /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../os/linux/rt_linux.c:708:15: warning: assignment makes integer from pointer without a cast [enabled by default] pOSPkt->tail = pOSPkt->data + pOSPkt->len; ^ CC [M] /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../os/linux/rt_main_dev.o CC [M] /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../common/ba_action.o In file included from /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/include/rtmp_os.h:42:0, from /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/include/rtmp_comm.h:56, from /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/include/rt_config.h:36, from /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../common/ba_action.c:3: /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../common/ba_action.c: In function ‘convert_reordering_packet_to_preAMSDU_or_802_3_packet’: /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/include/os/rt_linux.h:992:34: warning: assignment makes integer from pointer without a cast [enabled by default] ((RTPKT_TO_OSPKT(_pkt))->tail) = (PUCHAR)((_start) + (_len)) ^ /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/include/os/rt_linux.h:1035:2: note: in expansion of macro ‘SET_OS_PKT_DATATAIL’ SET_OS_PKT_DATATAIL(__pRxPkt, __pData, __DataSize); \ ^ /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../common/ba_action.c:1550:2: note: in expansion of macro ‘RTMP_OS_PKT_INIT’ RTMP_OS_PKT_INIT(pRxBlk->pRxPacket, ^ CC [M] /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../common/rt_led.o CC [M] /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../common/cmm_mac_pci.o /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../common/cmm_mac_pci.c: In function ‘RT28xxPciMlmeRadioOn’: /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../common/cmm_mac_pci.c:2245:13: warning: unused variable ‘Cancelled’ [-Wunused-variable] BOOLEAN Cancelled; ^ CC [M] /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../common/cmm_data_pci.o /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../common/cmm_data_pci.c: In function ‘RTMPFreeTXDUponTxDmaDone’: /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../common/cmm_data_pci.c:543:8: warning: unused variable ‘TXWISize’ [-Wunused-variable] UINT8 TXWISize = pAd->chipCap.TXWISize; ^ /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../common/cmm_data_pci.c: In function ‘RTMPHandleMgmtRingDmaDoneInterrupt’: /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../common/cmm_data_pci.c:738:8: warning: unused variable ‘TXWISize’ [-Wunused-variable] UINT8 TXWISize = pAd->chipCap.TXWISize; ^ CC [M] /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../os/linux/rt_rbus_pci_drv.o /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../os/linux/rt_rbus_pci_drv.c: In function ‘RTMPInitPCIeDevice’: /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../os/linux/rt_rbus_pci_drv.c:1349:22: warning: unused variable ‘Index’ [-Wunused-variable] UINT32 MacCsr0 = 0, Index= 0; ^ CC [M] /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../common/rtmp_mcu.o /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../common/rtmp_mcu.c: In function ‘RtmpAsicSendCommandToMcu’: /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../common/rtmp_mcu.c:464:8: warning: unused variable ‘offset’ [-Wunused-variable] ULONG offset; ^ /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../common/rtmp_mcu.c:463:8: warning: unused variable ‘Configuration’ [-Wunused-variable] ULONG Configuration; ^ CC [M] /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../common/ee_prom.o CC [M] /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../common/ee_efuse.o CC [M] /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../common/rt_rf.o CC [M] /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../chips/rt30xx.o CC [M] /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../chips/rt3290.o /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../chips/rt3290.c: In function ‘RT3290_AsicTxAlcGetAutoAgcOffset’: /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../chips/rt3290.c:1564:25: warning: assignment discards ‘const’ qualifier from pointer target type [enabled by default] pTxPowerTuningEntry = &(TxPowerTuningTable[TuningTableIndex + TX_POWER_TUNING_ENTRY_OFFSET]); ^ /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../chips/rt3290.c: In function ‘MlmeAntSelection’: /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../chips/rt3290.c:2489:4: warning: format ‘%d’ expects argument of type ‘int’, but argument 2 has type ‘ULONG’ [-Wformat=] DBGPRINT(RT_DEBUG_TRACE,("AntS: AvgTxErrorRatio = %d , TxErrorRatio = %d, AccuTxTotalCnt = %d, Rssi = %d\n",AvgTxErrorRatio, TxErrorRatio, AccuTxTotalCnt, Rssi)); ^ /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../chips/rt3290.c:2489:4: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘ULONG’ [-Wformat=] /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../chips/rt3290.c:2489:4: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘ULONG’ [-Wformat=] /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../chips/rt3290.c:2507:5: warning: format ‘%d’ expects argument of type ‘int’, but argument 2 has type ‘ULONG’ [-Wformat=] DBGPRINT(RT_DEBUG_TRACE, ("AntS: Train State: AntennaDiversityCount = %d\n", pAd->AntennaDiversityInfo.AntennaDiversityCount)); ^ /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../chips/rt3290.c:2522:5: warning: format ‘%d’ expects argument of type ‘int’, but argument 2 has type ‘ULONG’ [-Wformat=] DBGPRINT(RT_DEBUG_TRACE,("AntS, Ant 0, Tx: %d, Rx: %d\n",pAd->AntennaDiversityInfo.AntennaDiversityTxPacketCount[0],pAd->AntennaDiversityInfo.AntennaDiversityRxPacketCount[0])); ^ /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../chips/rt3290.c:2522:5: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘ULONG’ [-Wformat=] /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../chips/rt3290.c:2523:5: warning: format ‘%d’ expects argument of type ‘int’, but argument 2 has type ‘ULONG’ [-Wformat=] DBGPRINT(RT_DEBUG_TRACE,("AntS, Ant 1, Tx: %d, Rx: %d\n",pAd->AntennaDiversityInfo.AntennaDiversityTxPacketCount[1],pAd->AntennaDiversityInfo.AntennaDiversityRxPacketCount[1])); ^ /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../chips/rt3290.c:2523:5: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘ULONG’ [-Wformat=] /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../chips/rt3290.c:2526:5: warning: format ‘%d’ expects argument of type ‘int’, but argument 2 has type ‘ULONG’ [-Wformat=] DBGPRINT(RT_DEBUG_TRACE,("AntS: Train State: PER[Main] = %d, PER[Aux] = %d\n",pAd->AntennaDiversityInfo.AntennaDiversityPER[0],pAd->AntennaDiversityInfo.AntennaDiversityPER[1])); ^ /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../chips/rt3290.c:2526:5: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘ULONG’ [-Wformat=] /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../chips/rt3290.c:2527:5: warning: format ‘%d’ expects argument of type ‘int’, but argument 2 has type ‘ULONG’ [-Wformat=] DBGPRINT(RT_DEBUG_TRACE,("AntS: TotalTxCount[Main] = %d, TotalTxCount[Aux] = %d\n",pAd->AntennaDiversityInfo.AntennaDiversityTxPacketCount[0],pAd->AntennaDiversityInfo.AntennaDiversityTxPacketCount[1])); ^ /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../chips/rt3290.c:2527:5: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘ULONG’ [-Wformat=] /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../chips/rt3290.c:2528:5: warning: format ‘%d’ expects argument of type ‘int’, but argument 2 has type ‘ULONG’ [-Wformat=] DBGPRINT(RT_DEBUG_TRACE,("AntS: TotalRxCount[Main] = %d, TotalRxCount[Aux] = %d\n",pAd->AntennaDiversityInfo.AntennaDiversityRxPacketCount[0],pAd->AntennaDiversityInfo.AntennaDiversityRxPacketCount[1])); ^ /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../chips/rt3290.c:2528:5: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘ULONG’ [-Wformat=] /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../chips/rt3290.c:2545:6: warning: format ‘%d’ expects argument of type ‘int’, but argument 2 has type ‘ULONG’ [-Wformat=] DBGPRINT(RT_DEBUG_TRACE,("AntS: AntSAuxDelta = %d, AntSRssiFactor = %d, AntSPERFactor = %d\n", ^ /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../chips/rt3290.c:2545:6: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘ULONG’ [-Wformat=] /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../chips/rt3290.c:2545:6: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘ULONG’ [-Wformat=] /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../chips/rt3290.c:2559:9: warning: format ‘%d’ expects argument of type ‘int’, but argument 2 has type ‘ULONG’ [-Wformat=] DBGPRINT(RT_DEBUG_TRACE,("AntS: Good Rssi is at Main !! ++%d\n",(diffRssi*Ant0TotalPacket/pAd->StaCfg.AntSRssiFactor))); ^ /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../chips/rt3290.c:2565:9: warning: format ‘%d’ expects argument of type ‘int’, but argument 2 has type ‘ULONG’ [-Wformat=] DBGPRINT(RT_DEBUG_TRACE,("AntS: Good Rssi is at Aux !!++%d\n",(diffRssi*Ant1TotalPacket/pAd->StaCfg.AntSRssiFactor))); ^ /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../chips/rt3290.c:2574:8: warning: format ‘%d’ expects argument of type ‘int’, but argument 2 has type ‘ULONG’ [-Wformat=] DBGPRINT(RT_DEBUG_TRACE,("AntS: Good PER is at Main !! ++%d\n", (diffPER*Ant0TotalPacket/pAd->StaCfg.AntSPERFactor))); ^ /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../chips/rt3290.c:2581:8: warning: format ‘%d’ expects argument of type ‘int’, but argument 2 has type ‘ULONG’ [-Wformat=] DBGPRINT(RT_DEBUG_TRACE,("AntS: Good PER is at Aux !! ++%d\n", (diffPER*Ant1TotalPacket/pAd->StaCfg.AntSPERFactor))); ^ /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../chips/rt3290.c:2583:7: warning: format ‘%d’ expects argument of type ‘int’, but argument 2 has type ‘ULONG’ [-Wformat=] DBGPRINT(RT_DEBUG_TRACE,("AntS: Delta Packet = %d,%d, diffRssi = %d, diffPER = %d\n",(diffRssi*Ant0TotalPacket/pAd->StaCfg.AntSRssiFactor),(diffPER*Ant1TotalPacket/pAd->StaCfg.AntSPERFactor),diffRssi, diffPER)); ^ /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../chips/rt3290.c:2583:7: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘ULONG’ [-Wformat=] /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../chips/rt3290.c:2595:6: warning: format ‘%d’ expects argument of type ‘int’, but argument 2 has type ‘ULONG’ [-Wformat=] DBGPRINT(RT_DEBUG_TRACE,("AntS: Stop Train State: PER[Main] = %d, PER[Aux] = %d\n",pAd->AntennaDiversityInfo.AntennaDiversityPER[0],pAd->AntennaDiversityInfo.AntennaDiversityPER[1])); ^ /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../chips/rt3290.c:2595:6: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘ULONG’ [-Wformat=] /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../chips/rt3290.c:2596:6: warning: format ‘%d’ expects argument of type ‘int’, but argument 2 has type ‘ULONG’ [-Wformat=] DBGPRINT(RT_DEBUG_TRACE,("AntS: TotalTxCount[Main] = %d, TotalTxCount[Aux] = %d\n",pAd->AntennaDiversityInfo.AntennaDiversityTxPacketCount[0],pAd->AntennaDiversityInfo.AntennaDiversityTxPacketCount[1])); ^ /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../chips/rt3290.c:2596:6: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘ULONG’ [-Wformat=] /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../chips/rt3290.c:2597:6: warning: format ‘%d’ expects argument of type ‘int’, but argument 2 has type ‘ULONG’ [-Wformat=] DBGPRINT(RT_DEBUG_TRACE,("AntS: TotalRxCount[Main] = %d, TotalRxCount[Aux] = %d\n",pAd->AntennaDiversityInfo.AntennaDiversityRxPacketCount[0],pAd->AntennaDiversityInfo.AntennaDiversityRxPacketCount[1])); ^ /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../chips/rt3290.c:2597:6: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘ULONG’ [-Wformat=] /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../chips/rt3290.c: In function ‘BtCoexSetting’: /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../chips/rt3290.c:3244:4: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘ULONG’ [-Wformat=] DBGPRINT(RT_DEBUG_TRACE, ("%s:COEX_MODE is active(Two Antenna Mode)!!! CoexMode = %d, BBPCurrentBW = %d, Rssi = %d, RfR49Value = 0x%x\n", ^ /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../chips/rt3290.c: In function ‘Profile_TwoAnt’: /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../chips/rt3290.c:4097:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘CMB_CTRL_STRUC’ [-Wformat=] printk("cmbCtrl = %x\n",cmbCtrl); ^ CC [M] /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../os/linux/rt_pci_rbus.o CC [M] /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../os/linux/rt_rbus_pci_util.o CC [M] /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../os/linux/pci_main_dev.o /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../os/linux/pci_main_dev.c:43:23: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘rt2860_remove_one’ static VOID __devexit rt2860_remove_one(struct pci_dev *pci_dev); ^ /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../os/linux/pci_main_dev.c:44:22: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘rt2860_probe’ static INT __devinit rt2860_probe(struct pci_dev *pci_dev, const struct pci_device_id *ent); ^ /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../os/linux/pci_main_dev.c:63:46: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘__devinitdata’ static struct pci_device_id rt2860_pci_tbl[] __devinitdata = ^ /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../os/linux/pci_main_dev.c:85:17: error: ‘rt2860_pci_tbl’ undeclared here (not in a function) id_table: rt2860_pci_tbl, ^ /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../os/linux/pci_main_dev.c:86:17: error: ‘rt2860_probe’ undeclared here (not in a function) probe: rt2860_probe, ^ /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../os/linux/pci_main_dev.c:88:5: error: implicit declaration of function ‘__devexit_p’ [-Werror=implicit-function-declaration] remove: __devexit_p(rt2860_remove_one), ^ /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../os/linux/pci_main_dev.c:88:29: error: ‘rt2860_remove_one’ undeclared here (not in a function) remove: __devexit_p(rt2860_remove_one), ^ /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../os/linux/pci_main_dev.c:292:24: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘rt2860_probe’ static INT __devinit rt2860_probe( ^ /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../os/linux/pci_main_dev.c:463:23: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘rt2860_remove_one’ static VOID __devexit rt2860_remove_one( ^ In file included from /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/include/os/rt_linux.h:18:0, from /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/include/rtmp_os.h:42, from /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/include/rtmp_comm.h:56, from /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../os/linux/pci_main_dev.c:32: include/linux/module.h:87:32: error: ‘__mod_pci_device_table’ aliased to undefined symbol ‘rt2860_pci_tbl’ extern const struct gtype##_id __mod_##gtype##_table \ ^ include/linux/module.h:145:3: note: in expansion of macro ‘MODULE_GENERIC_TABLE’ MODULE_GENERIC_TABLE(type##_device,name) ^ /home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../os/linux/pci_main_dev.c:71:1: note: in expansion of macro ‘MODULE_DEVICE_TABLE’ MODULE_DEVICE_TABLE(pci, rt2860_pci_tbl); ^ cc1: some warnings being treated as errors make[2]: *** [/home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../os/linux/pci_main_dev.o] Error 1 make[1]: *** [_module_/home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-3.11.0-15-generic' make: *** [LINUX] Error 2
Název: Re:HP 650, RT3290 Wireless 802.11n, disfunkční [vyřešeno]
Přispěvatel: RRRadek Neužil 16 Ledna 2014, 12:32:11: Testoval jsem pouze na LTS 12.04 a u 13.xx to může být jinak... zkuste guuglit...
http://askubuntu.com/questions/324115/ralink-bluetooth-not-working-in-ubuntu-13-04 (http://askubuntu.com/questions/324115/ralink-bluetooth-not-working-in-ubuntu-13-04)
Název: Re:HP 650, RT3290 Wireless 802.11n, disfunkční [vyřešeno]
Přispěvatel: petertomasy 16 Ledna 2014, 14:00:00: Citace
/home/lak/Stažené/ralink/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../os/linux/pci_main_dev.c:43:23: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘rt2860_remove_one’
static VOID __devexit rt2860_remove_one(struct pci_dev *pci_dev);

pri jadre väčšom ako > 3.8.0 musíš upraviť pred kompiláciou ešte súbor DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/pci_main_dev.c

viz http://forum.ubuntu.cz/index.php?topic=68959.msg495386#msg495386 (http://forum.ubuntu.cz/index.php?topic=68959.msg495386#msg495386)
Název: Re:HP 650, RT3290 Wireless 802.11n, disfunkční [vyřešeno]
Přispěvatel: Desolator 16 Ledna 2014, 14:13:28: Děkuju za odpovědi.

Vyřešeno podle: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1189721 Uživatel James Dafoe.