Fórum Ubuntu CZ/SK
Ubuntu pro osobní počítače => Hardware => Téma založeno: Ajpi 08 Července 2014, 12:46:13
-
Ahoj,
po zapnutí mi naběhne obrazovka, ve které mám na výběr mezi *Ubuntu, Advanced option for Ubuntu, anebo memory testy.
Zvolím ubunutu a na černé obrazovce bílým písmem na mě vyběhne:
/sbin/init: eror while loading shared libraries: /lib/i386-linux-gnu/libjson-c . so . 2 : cannot read file data : Eror 21
[ 2.776457] Kernel panic - not syncing : Attempted to kill init! exitcode=0x00007f00
[ 2.776504] CPU: 1 PID: 1 Comm: init not tained 3.13.0-30-generic #54-Ubuntu
[ 2. 776544] Hardware name: MICRO-STAR INTERNATIONAL CO. ,LTD MS-7368/MS-7368, BIOS V1.5 10/15/2007
[ 2.776585] 00000000 00000000 f705df1c c164f6f3 c1933e00 f705df3c c164a82c c182ba58
[ 2.761419] c1aa9c80 f705df28 c1933e00 f681780 f 7090000 f705df8c c105911f c182bd7c
[ 2.761752] 00007f00 00000004 b76e0f08 00000001 00000020 00000000 00000000 f6861c08
[ 2.762085] call Trace:
[ 2.762130] [<c164f6f3>] dump_stack+0x41/0x52
[ 2.762172] [<c164a82c>] panic+0x87/0x181
[ 2.762214] [<c105911f>] do_exit+0x8ef/0x8f0
[ 2.829247] [<c1059194>] do_group_exit+0x34/0xa0
[ 2.828287] [<c1059216>] Sys_exit_group+0x16/0x20
[ 2.829329] [<c16567c7>] syscall_call+0x7/0xb
Protože mi to pořád blbne, mám podezření na špatný HW, je to možné?
Vždy nainstaluji Ubuntu, nebo v tomto případě Xubuntu a počítač pár dní jde a pak se objeví něco takového.
Děkuju za pomoc
-
/sbin/init: eror while loading shared libraries: /lib/i386-linux-gnu/libjson-c . so . 2 : cannot read file data : Eror 21
zkus prosim nabootovat z cd a udelat nejaky test na HDD
http://askubuntu.com/questions/317241/can-i-use-ubuntu-to-diagnose-hard-drive-or-ram-problems-in-windows
-
Jo, vypadá to na problém se čtením z disku
-
tak jsem zkontroloval disk pres gsmartcontrol
v eror logu je
Complete error log:
SMART Error Log Version: 1
ATA Error Count: 2389 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2389 occurred at disk power-on lifetime: 20808 hours (867 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 39 ca 7f e0 Error: UNC at LBA = 0x007fca39 = 8374841
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 00 39 ca 7f e0 00 00:34:48.369 READ DMA EXT
25 00 08 7f fc 76 e0 00 00:34:48.369 READ DMA EXT
25 00 20 5f 03 75 e0 00 00:34:48.367 READ DMA EXT
25 00 18 ff 89 40 e0 00 00:34:48.360 READ DMA EXT
25 00 60 0f 56 54 e0 00 00:34:48.359 READ DMA EXT
Error 2388 occurred at disk power-on lifetime: 20808 hours (867 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 39 ca 7f e0 Error: UNC at LBA = 0x007fca39 = 8374841
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 00 31 ca 7f e0 00 00:34:34.407 READ DMA EXT
25 00 80 b1 c9 7f e0 00 00:34:34.415 READ DMA EXT
25 00 80 31 c9 7f e0 00 00:34:34.414 READ DMA EXT
25 00 80 b1 c8 7f e0 00 00:34:34.414 READ DMA EXT
25 00 80 31 c8 7f e0 00 00:34:34.413 READ DMA EXT
Error 2387 occurred at disk power-on lifetime: 20807 hours (866 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 39 ca 7f e0 Error: UNC at LBA = 0x007fca39 = 8374841
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 00 39 ca 7f e0 00 00:07:03.854 READ DMA EXT
25 00 40 0f 7a 54 e0 00 00:07:03.854 READ DMA EXT
25 00 20 ef 79 54 e0 00 00:07:03.917 READ DMA EXT
25 00 60 0f 56 54 e0 00 00:07:03.902 READ DMA EXT
25 00 80 8f 55 54 e0 00 00:07:03.895 READ DMA EXT
Error 2386 occurred at disk power-on lifetime: 20807 hours (866 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 39 ca 7f e0 Error: UNC at LBA = 0x007fca39 = 8374841
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 00 21 ca 7f e0 00 00:06:43.330 READ DMA EXT
25 00 40 0f 4b 54 e0 00 00:06:43.303 READ DMA EXT
25 00 08 67 36 75 e0 00 00:06:43.289 READ DMA EXT
25 00 66 27 04 03 e0 00 00:06:43.278 READ DMA EXT
25 00 60 87 64 44 e0 00 00:06:43.277 READ DMA EXT
Error 2385 occurred at disk power-on lifetime: 20807 hours (866 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 39 ca 7f e0 Error: UNC at LBA = 0x007fca39 = 8374841
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 40 21 ca 7f e0 00 00:03:16.822 READ DMA EXT
25 00 08 6f 44 62 e0 00 00:03:16.820 READ DMA EXT
35 00 08 97 79 5d e0 00 00:03:16.819 WRITE DMA EXT
25 00 08 07 1a 13 e0 00 00:03:16.790 READ DMA EXT
25 00 08 c7 55 00 e0 00 00:03:16.898 READ DMA EXTv attributes a self test log je: viz obrazek
tak nevim, vubec se v tom nevyznam....
Diky za pomoc
[příloha smazaná administrátorem]
-
Ten disk jde do křemíkového nebe, zálohuj co se dá a vyměň.
-
Takze koupit novy jo? Poradil bys mi prosim jaky?
Diky
-
A jak to, ze to vzdycky par dnu jde a pak toto?
Jak to, ze to vubec funguje? I kdyz jen par dni....
Dekuju
-
Elektronika to vzdává, to se projevuje takhle