Fórum Ubuntu CZ/SK
Ubuntu pro osobní počítače => Pracovní prostředí => Téma založeno: davyd 27 Září 2014, 11:29:02
-
Zkoušel jsem po delší době počítač s Ubuntu a jsem velmi znechucen! Potřeboval jsem něco vypálit a našel jsem vypalovací program Brasero a byl to jediný vypalovací program, který v tom počítači byl k dispozici. Zjistil jsem, že on umí lautr howno. Ať už vypaluji cokoliv, tak ani tu posranou rychlost pálení mi to nenabídne nastavit, ani jiné věci. To je teda úroveň jak prase. A když jsem chtěl vypálit datové CD (datové DVD), tak mi ten mrzák neumožní nastavit ani ten souborový systém. Jestli to bude čitelné v linuchu, nebo ve widlích, nebo v obojím, nebo....; zacházení s názvy; Joliet; Rock-Ridge; a další voloviny. A to já potřebuji. Protože když pálím data, tak potřebuji, aby to vypálené kolco bylo čitelné pod Linuchem, Unixem, i Widlemi. A taky aby se mi nemršily názvy souborů a složek (např velké a malé písmena, zkracování názvů, a jiné), protože moje soubory dost často navzájem odkazují, a to by se změnou názvů zkurwilo. A taky vyžaduji, aby to sneslo ve stejném umístění soubory s názvy lišící se navzájem třeba i pouze velikosti písmen, čili aby nevznikl problém, že by mi ten kripl vynechával soubory s podobnými názvy. Kde vezmu jistotu, že datové CD (datové DVD) bude dobře nastavené? Když nemám možnost navolit ani prohlédnout si souborový systém, ani dílčí věci kolem toho. Prostě při vypalování Braserem jsem jako bez ruky. To se vůbec nedá srovnat s počítačem, ve kterém mám Mandrivalinux a vypalovací program K3b, který toho umí nesrovnatelně více. Nebo s Nerem ve Windows XP.
-
Už je ti lépe? :D
Ne váženě, já s Braserem nemám sebemenší problém. Nastavit rychlost mi to nabízí vždy!
(http://2.bp.blogspot.com/-oSFbEPGlLwk/T8kBNv18U-I/AAAAAAAAAV0/Uwn_pMyIer8/s400/brasero3.png)
Potom ty ostatní věci máš možná pravdu ale nikdy jsem neměl problém že by vypálené datové CD/DVD nebylo čitelné v jakémkoliv jiném operačním systému. Brasero je jednoduchý vypalovací soft pro úplné lajky a 90% všech uživatelům na to jejich domácí vypalování stačí.
Pro ostatní je tu spousta jiných možností které si stačí doinstalovat.
https://apps.ubuntu.com/cat/applications/k3b/
http://www.nero.com/enu/promo-linux.html > kolega používá na Ubuntu 14.04 k plné spokojenosti a kupodivu je v češtině ;)
Dál asi netřeba se rozepisovat že? Schválně co ve výchozí instalaci Windows umí bez doinstalování třetích programu vypalovat?
-
K3b není náhodou jenom pro KDE? (K3b KDE Burning Tool)
-
KDE aplikace bez problémů fungují i pod Ubuntu/Gnome...
Jen tak perfektně nezapadají graficky jako GTK aplikace ale to na funkčnosti nic nemění ;)
(http://screenshots.ubuntu.com/screenshots/k/k3b/7735_large.png)
-
Brasero vždy jednou za pár let po přeinstalaci pracovní pece vyzkouším, zničený disk zahodím a pokračuju s K3b :)
-
http://www.nero.com/enu/promo-linux.html
-
Brasero vždy jednou za pár let po přeinstalaci pracovní pece vyzkouším, zničený disk zahodím a pokračuju s K3b :)
GdH, táto hláška mala byť tu >>> Vtípky okolo LINUXU :-) (http://forum.ubuntu.cz/index.php?topic=1813.msg523251#new)
;D
-
Kdysi jsem nekde zahledl projekt isofs nebo tak nejak - namountoval se adresar ktery prubezne zapisoval .iso... a to pak stacilo ddckem narvat na disk :)
-
a nebo se nauc pouzivat wodim a mkisofs z cli .. stejne tohle "pod kapotou" pouziva brasero i k3b ..
# wodim --help
Usage: wodim [options] track1...trackn
Options:
-version print version information and exit
dev=target SCSI target to use as CD/DVD-Recorder
gracetime=# set the grace time before starting to write to #.
timeout=# set the default SCSI command timeout to #.
debug=#,-d Set to # or increment misc debug level
kdebug=#,kd=# do Kernel debugging
-verbose,-v increment general verbose level by one
-Verbose,-V increment SCSI command transport verbose level by one
-silent,-s do not print status of failed SCSI commands
driver=name user supplied driver name, use with extreme care
driveropts=opt a comma separated list of driver specific options
-setdropts set driver specific options and exit
-checkdrive check if a driver for the drive is present
-prcap print drive capabilities for MMC compliant drives
-inq do an inquiry for the drive and exit
-scanbus scan the SCSI and IDE buses and exit
-reset reset the SCSI bus with the cdrecorder (if possible)
-abort send an abort sequence to the drive (may help if hung)
-overburn allow to write more than the official size of a medium
-ignsize ignore the known size of a medium (may cause problems)
-useinfo use *.inf files to overwrite audio options.
speed=# set speed of drive
blank=type blank a CD-RW disc (see blank=help)
-format format a CD-RW/DVD-RW/DVD+RW disc
formattype=# select the format method for DVD+RW disc
fs=# Set fifo size to # (0 to disable, default is 4 MB)
ts=# set maximum transfer size for a single SCSI command
-load load the disk and exit (works only with tray loader)
-lock load and lock the disk and exit (works only with tray loader)
-eject eject the disk after doing the work
-dummy do everything with laser turned off
-msinfo retrieve multi-session info for genisoimage
-msifile=path run -msinfo and copy output to file
-toc retrieve and print TOC/PMA data
-atip retrieve and print ATIP data
-multi generate a TOC that allows multi session
In this case default track type is CD-ROM XA mode 2 form 1 - 2048 bytes
-fix fixate a corrupt or unfixated disk (generate a TOC)
-nofix do not fixate disk after writing tracks
-waiti wait until input is available before opening SCSI
-immed Try to use the SCSI IMMED flag with certain long lasting commands
-force force to continue on some errors to allow blanking bad disks
-tao Write disk in TAO mode.
-dao Write disk in SAO mode.
-sao Write disk in SAO mode.
-raw Write disk in RAW mode.
-raw96r Write disk in RAW/RAW96R mode.
-raw96p Write disk in RAW/RAW96P mode.
-raw16 Write disk in RAW/RAW16 mode.
-clone Write disk in clone write mode.
tsize=# Length of valid data in next track
padsize=# Amount of padding for next track
pregap=# Amount of pre-gap sectors before next track
defpregap=# Amount of pre-gap sectors for all but track #1
mcn=text Set the media catalog number for this CD to 'text'
isrc=text Set the ISRC number for the next track to 'text'
index=list Set the index list for the next track to 'list'
-text Write CD-Text from information from *.inf or *.cue files
textfile=name Set the file with CD-Text data to 'name'
cuefile=name Set the file with CDRWIN CUE data to 'name'
-audio Subsequent tracks are CD-DA audio tracks
-data Subsequent tracks are CD-ROM data mode 1 - 2048 bytes (default)
-mode2 Subsequent tracks are CD-ROM data mode 2 - 2336 bytes
-xa Subsequent tracks are CD-ROM XA mode 2 form 1 - 2048 bytes
-xa1 Subsequent tracks are CD-ROM XA mode 2 form 1 - 2056 bytes
-xa2 Subsequent tracks are CD-ROM XA mode 2 form 2 - 2324 bytes
-xamix Subsequent tracks are CD-ROM XA mode 2 form 1/2 - 2332 bytes
-cdi Subsequent tracks are CDI tracks
-isosize Use iso9660 file system size for next data track
-preemp Audio tracks are mastered with 50/15 microseconds preemphasis
-nopreemp Audio tracks are mastered with no preemphasis (default)
-copy Audio tracks have unlimited copy permission
-nocopy Audio tracks may only be copied once for personal use (default)
-scms Audio tracks will not have any copy permission at all
-pad Pad data tracks with 15 zeroed sectors
Pad audio tracks to a multiple of 2352 bytes
-nopad Do not pad data tracks (default)
-shorttrack Subsequent tracks may be non Red Book < 4 seconds if in SAO or RAW mode
-noshorttrack Subsequent tracks must be >= 4 seconds
-swab Audio data source is byte-swapped (little-endian/Intel)
The type of the first track is used for the toc type.
Currently only form 1 tracks are supported.
# mkisofs --help
Usage: genisoimage [options] file...
Options:
-nobak Do not include backup files
-no-bak Do not include backup files
-abstract FILE Set Abstract filename
-A ID, -appid ID Set Application ID
-biblio FILE Set Bibliographic filename
-cache-inodes Cache inodes (needed to detect hard links)
-no-cache-inodes Do not cache inodes (if filesystem has no unique unides)
-check-oldnames Check all imported ISO9660 names from old session
-check-session FILE Check all ISO9660 names from previous session
-copyright FILE Set Copyright filename
-debug Set debug flag
-b FILE, -eltorito-boot FILE
Set El Torito boot image name
-eltorito-alt-boot Start specifying alternative El Torito boot parameters
-B FILES, -sparc-boot FILES Set sparc boot image names
-sunx86-boot FILES Set sunx86 boot image names
-G FILE, -generic-boot FILE Set generic boot image name
-sparc-label label text Set sparc boot disk label
-sunx86-label label text Set sunx86 boot disk label
-c FILE, -eltorito-catalog FILE
Set El Torito boot catalog name
-C PARAMS, -cdrecord-params PARAMS
Magic paramters from cdrecord
-d, -omit-period Omit trailing periods from filenames (violates ISO9660)
-dir-mode mode Make the mode of all directories this mode.
-D, -disable-deep-relocation
Disable deep directory relocation (violates ISO9660)
-file-mode mode Make the mode of all plain files this mode.
-f, -follow-links Follow symbolic links
-gid gid Make the group owner of all files this gid.
-graft-points Allow to use graft points for filenames
-root DIR Set root directory for all new files and directories
-old-root DIR Set root directory in previous session that is searched for files
-help Print option help
-hide GLOBFILE Hide ISO9660/RR file
-hide-list FILE File with list of ISO9660/RR files to hide
-hidden GLOBFILE Set hidden attribute on ISO9660 file
-hidden-list FILE File with list of ISO9660 files with hidden attribute
-hide-joliet GLOBFILE Hide Joliet file
-hide-joliet-list FILE File with list of Joliet files to hide
-hide-joliet-trans-tbl Hide TRANS.TBL from Joliet tree
-hide-rr-moved Rename RR_MOVED to .rr_moved in Rock Ridge tree
-gui Switch behaviour for GUI
-i ADD_FILES No longer supported
-input-charset CHARSET Local input charset for file name conversion
-output-charset CHARSET Output charset for file name conversion
-iso-level LEVEL Set ISO9660 conformance level (1..3) or 4 for ISO9660 version 2
-J, -joliet Generate Joliet directory information
-joliet-long Allow Joliet file names to be 103 Unicode characters
-jcharset CHARSET Local charset for Joliet directory information
-l, -full-iso9660-filenames Allow full 31 character filenames for ISO9660 names
-max-iso9660-filenames Allow 37 character filenames for ISO9660 names (violates ISO9660)
-allow-limited-size Allow different file sizes in ISO9660/UDF on large files
-allow-leading-dots Allow ISO9660 filenames to start with '.' (violates ISO9660)
-ldots Allow ISO9660 filenames to start with '.' (violates ISO9660)
-L, -allow-leading-dots Allow ISO9660 filenames to start with '.' (violates ISO9660)
-log-file LOG_FILE Re-direct messages to LOG_FILE
-m GLOBFILE, -exclude GLOBFILE
Exclude file name
-exclude-list FILE File with list of file names to exclude
-pad Pad output to a multiple of 32k (default)
-no-pad Do not pad output to a multiple of 32k
-M FILE, -prev-session FILE Set path to previous session to merge
-dev SCSIdev Set path to previous session to merge
-N, -omit-version-number Omit version number from ISO9660 filename (violates ISO9660)
-new-dir-mode mode Mode used when creating new directories.
-force-rr Inhibit automatic Rock Ridge detection for previous session
-no-rr Inhibit reading of Rock Ridge attributes from previous session
-no-split-symlink-components
Inhibit splitting symlink components
-no-split-symlink-fields Inhibit splitting symlink fields
-o FILE, -output FILE Set output file name
-path-list FILE File with list of pathnames to process
-p PREP, -preparer PREP Set Volume preparer
-print-size Print estimated filesystem size and exit
-publisher PUB Set Volume publisher
-P PUB, -publisher PUB Set Volume publisher
-quiet Run quietly
-r, -rational-rock Generate rationalized Rock Ridge directory information
-R, -rock Generate Rock Ridge directory information
-s TYPE, -sectype TYPE Set output sector type to e.g. data/xa1/raw
-alpha-boot FILE Set alpha boot image name (relative to image root)
-hppa-cmdline CMDLINE Set hppa boot command line (relative to image root)
-hppa-kernel-32 FILE Set hppa 32-bit image name (relative to image root)
-hppa-kernel-64 FILE Set hppa 64-bit image name (relative to image root)
-hppa-bootloader FILE Set hppa boot loader file name (relative to image root)
-hppa-ramdisk FILE Set hppa ramdisk file name (relative to image root)
-mips-boot FILE Set mips boot image name (relative to image root)
-mipsel-boot FILE Set mipsel boot image name (relative to image root)
-jigdo-jigdo FILE Produce a jigdo .jigdo file as well as the .iso
-jigdo-template FILE Produce a jigdo .template file as well as the .iso
-jigdo-min-file-size SIZE Minimum size for a file to be listed in the jigdo file
-jigdo-force-md5 PATTERN Pattern(s) where files MUST match an externally-supplied MD5sum
-jigdo-exclude PATTERN Pattern(s) to exclude from the jigdo file
-jigdo-map PATTERN1=PATTERN2
Pattern(s) to map paths (e.g. Debian=/mirror/debian)
-md5-list FILE File containing MD5 sums of the files that should be checked
-jigdo-template-compress ALGORITHM
Choose to use gzip or bzip2 compression for template data; default is gzip
-checksum_algorithm_iso alg1,alg2,...
Specify the checksum types desired for the output image
-checksum_algorithm_template alg1,alg2,...
Specify the checksum types desired for the output jigdo template
-sort FILE Sort file content locations according to rules in FILE
-split-output Split output into files of approx. 1GB size
-stream-file-name FILE_NAME Set the stream file ISO9660 name (incl. version)
-stream-media-size # Set the size of your CD media in sectors
-sysid ID Set System ID
-T, -translation-table Generate translation tables for systems that don't understand long filenames
-table-name TABLE_NAME Translation table file name
-ucs-level LEVEL Set Joliet UCS level (1..3)
-udf Generate UDF file system
-dvd-video Generate DVD-Video compliant UDF file system
-uid uid Make the owner of all files this uid.
-U, -untranslated-filenames Allow Untranslated filenames (for HPUX & AIX - violates ISO9660). Forces -l, -d, -N, -allow-leading-dots, -relaxed-filenames, -allow-lowercase, -allow-multidot
-relaxed-filenames Allow 7 bit ASCII except lower case characters (violates ISO9660)
-no-iso-translate Do not translate illegal ISO characters '~', '-' and '#' (violates ISO9660)
-allow-lowercase Allow lower case characters in addition to the current character set (violates ISO9660)
-allow-multidot Allow more than one dot in filenames (e.g. .tar.gz) (violates ISO9660)
-use-fileversion LEVEL Use file version # from filesystem
-v, -verbose Verbose
-version Print the current version
-V ID, -volid ID Set Volume ID
-volset ID Set Volume set ID
-volset-size # Set Volume set size
-volset-seqno # Set Volume set sequence number
-x FILE, -old-exclude FILE Exclude file name(depreciated)
-hard-disk-boot Boot image is a hard disk image
-no-emul-boot Boot image is 'no emulation' image
-no-boot Boot image is not bootable
-boot-load-seg # Set load segment for boot image
-boot-load-size # Set numbers of load sectors
-boot-info-table Patch boot image with info table
-XA Generate XA directory attruibutes
-xa Generate rationalized XA directory attruibutes
-z, -transparent-compression
Enable transparent compression of files
-hfs-type TYPE Set HFS default TYPE
-hfs-creator CREATOR Set HFS default CREATOR
-g, -apple Add Apple ISO9660 extensions
-h, -hfs Create ISO9660/HFS hybrid
-map MAPPING_FILE Map file extensions to HFS TYPE/CREATOR
-H MAPPING_FILE, -map MAPPING_FILE
Map file extensions to HFS TYPE/CREATOR
-magic FILE Magic file for HFS TYPE/CREATOR
-probe Probe all files for Apple/Unix file types
-mac-name Use Macintosh name for ISO9660/Joliet/RockRidge file name
-no-mac-files Do not look for Unix/Mac files (depreciated)
-boot-hfs-file FILE Set HFS boot image name
-part Generate HFS partition table
-cluster-size SIZE Cluster size for PC Exchange Macintosh files
-auto FILE Set HFS AutoStart file name
-no-desktop Do not create the HFS (empty) Desktop files
-hide-hfs GLOBFILE Hide HFS file
-hide-hfs-list FILE List of HFS files to hide
-hfs-volid HFS_VOLID Volume name for the HFS partition
-icon-position Keep HFS icon position
-root-info FILE finderinfo for root folder
-input-hfs-charset CHARSET Local input charset for HFS file name conversion
-output-hfs-charset CHARSET Output charset for HFS file name conversion
-hfs-unlock Leave HFS Volume unlocked
-hfs-bless FOLDER_NAME Name of Folder to be blessed
-hfs-parms PARAMETERS Comma separated list of HFS parameters
-prep-boot FILE PReP boot image file -- up to 4 are allowed
-chrp-boot Add CHRP boot header
--cap Look for AUFS CAP Macintosh files
--netatalk Look for NETATALK Macintosh files
--double Look for AppleDouble Macintosh files
--ethershare Look for Helios EtherShare Macintosh files
--exchange Look for PC Exchange Macintosh files
--sgi Look for SGI Macintosh files
--macbin Look for MacBinary Macintosh files
--single Look for AppleSingle Macintosh files
--ushare Look for IPT UShare Macintosh files
--xinet Look for XINET Macintosh files
--dave Look for DAVE Macintosh files
--sfm Look for SFM Macintosh files
--osx-double Look for MacOS X AppleDouble Macintosh files
--osx-hfs Look for MacOS X HFS Macintosh files
Report problems to debburn-devel@lists.alioth.debian.org.