Fórum Ubuntu CZ/SK
Ubuntu pro osobní počítače => Hardware => Téma založeno: matlala 02 Března 2015, 21:52:08
-
Potřebuju asi hodně pomoct, protože už nad tím sedím 2. den a ani google nepomohl, resp nenavedl.
Slíbil jsem strejdovi přeinstalovat komp při příležitosti toho, že si koupil net a s XP to prostě nešlo.
Zkrátka inslačka ubuntu 14.04.2 bez problémů, po aktualizaci a restartu nenajede lighdm, zkoušel jsem i gdm a nic, jedine xka příkazem startx najedou a chtěj překonfigurovat grafiku.
Je tam
01:00.0 VGA compatible controller: NVIDIA Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev a4)
Kernel driver in use: nouveau
zkoušel jsem i 331, 340 i 304-current ovladače a nic, je to ejště horší, takže jsem zas u čisté instalace.
ǔdajně takhle karta nepodporuje větší rozlišení a mám na tom svuj FHD monitor, s menším rozlišením a VGA doma fakt už nemám. Vypnout 3D v přímo parametrem v /etc/default/grub
GRUB_CMDLINE_LINUX_DEFAULT="nouveau.noaccel=1"jsem zkoušel, ale bez výsledku taktéž.
taktéž repozitáře ppa:ubuntu-x-swat/x-updates a ppa:xorg-edgers/ppa nepomohli :-(
Předpokládám že problém je v grafice a přikládám ještě pár věcí.
jenda@jenda-ubuntu ~ $ sudo service lightdm restart
[sudo] password for jenda:
lightdm stop/waiting
lightdm start/running, process 25111
jenda@jenda-ubuntu ~ $ dmesg | tail -25
[ 539.088009] prefetch64-sse: 1836.000 MB/sec
[ 539.088013] xor: using function: prefetch64-sse (1836.000 MB/sec)
[ 539.208972] Btrfs loaded
[ 728.934266] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 3)
[ 979.865034] nouveau [ DRM] Setting dpms mode 0 on TV encoder (output 3)
[ 979.865052] nouveau [ DRM] Output TV-1 is running on CRTC 1 using output B
[ 979.972404] init: plymouth-upstart-bridge main process ended, respawning
[ 980.036514] init: plymouth main process (159) killed by ABRT signal
[ 980.043070] init: plymouth-upstart-bridge main process (25071) terminated with status 1
[ 980.043112] init: plymouth-upstart-bridge main process ended, respawning
[ 981.636043] nouveau [ DRM] Load detected on output B
[ 982.568045] nouveau [ DRM] Load detected on output B
[ 982.820042] nouveau [ DRM] Load detected on output B
[ 983.017447] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 3)
[ 983.051966] nouveau [ DRM] Setting dpms mode 0 on TV encoder (output 3)
[ 983.051989] nouveau [ DRM] Output TV-1 is running on CRTC 1 using output B
[ 983.154892] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 3)
[ 983.318212] nouveau [ DRM] Setting dpms mode 0 on TV encoder (output 3)
[ 983.318238] nouveau [ DRM] Output TV-1 is running on CRTC 1 using output B
[ 983.404297] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 3)
[ 983.585002] nouveau [ DRM] Setting dpms mode 0 on TV encoder (output 3)
[ 983.585021] nouveau [ DRM] Output TV-1 is running on CRTC 1 using output B
[ 983.656872] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 3)
[ 983.818430] nouveau [ DRM] Setting dpms mode 0 on TV encoder (output 3)
[ 983.818448] nouveau [ DRM] Output TV-1 is running on CRTC 1 using output B
nejaký failsave konfigurák akorát
jenda@jenda-ubuntu ~ $ cat /etc/X11/xorg.conf.failsafe
Section "Device"
Identifier "Configured Video Device"
Driver "fbdev"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection
PS: kamarád prý jednu má a na debianu Jessie mu šlape bez problémů a dodatečné konfigurace
-
teď ještě koukám, nemůže se připojit na Xka
jenda@jenda-ubuntu ~ $ sudo cat /var/log/lightdm/lightdm.log
[+0.01s] DEBUG: Logging to /var/log/lightdm/lightdm.log
[+0.01s] DEBUG: Starting Light Display Manager 1.10.4, UID=0 PID=2070
[+0.01s] DEBUG: Loading configuration dirs from /usr/share/lightdm/lightdm.conf.d
[+0.01s] DEBUG: Loading configuration from /usr/share/lightdm/lightdm.conf.d/50-greeter-wrapper.conf
[+0.01s] DEBUG: Loading configuration from /usr/share/lightdm/lightdm.conf.d/50-guest-wrapper.conf
[+0.01s] DEBUG: Loading configuration from /usr/share/lightdm/lightdm.conf.d/50-ubuntu.conf
[+0.01s] DEBUG: Loading configuration from /usr/share/lightdm/lightdm.conf.d/50-unity-greeter.conf
[+0.01s] DEBUG: Loading configuration from /usr/share/lightdm/lightdm.conf.d/50-xserver-command.conf
[+0.01s] DEBUG: Loading configuration from /usr/share/lightdm/lightdm.conf.d/60-lightdm-gtk-greeter.conf
[+0.01s] DEBUG: Loading configuration dirs from /usr/local/share/lightdm/lightdm.conf.d
[+0.01s] DEBUG: Loading configuration dirs from /etc/xdg/lightdm/lightdm.conf.d
[+0.01s] DEBUG: Loading configuration from /etc/lightdm/lightdm.conf.d/20-lubuntu.conf
[+0.01s] DEBUG: Loading configuration from /etc/lightdm/lightdm.conf
[+0.01s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager
[+0.01s] DEBUG: Registered seat module xlocal
[+0.01s] DEBUG: Registered seat module xremote
[+0.01s] DEBUG: Registered seat module unity
[+0.01s] DEBUG: Registered seat module surfaceflinger
[+0.08s] DEBUG: Adding default seat
[+0.08s] DEBUG: Seat: Starting
[+0.08s] DEBUG: Seat: Creating greeter session
[+0.12s] DEBUG: Seat: Creating display server of type x
[+0.14s] DEBUG: Deactivating Plymouth
[+0.17s] DEBUG: Using VT 7
[+0.17s] DEBUG: Seat: Starting local X display on VT 7
[+0.17s] DEBUG: DisplayServer x-0: Logging to /var/log/lightdm/x-0.log
[+0.17s] DEBUG: DisplayServer x-0: Writing X server authority to /var/run/lightdm/root/:0
[+0.17s] DEBUG: DisplayServer x-0: Launching X Server
[+0.17s] DEBUG: Launching process 2098: /usr/bin/X -core :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
[+0.17s] DEBUG: DisplayServer x-0: Waiting for ready signal from X server :0
[+0.17s] DEBUG: Acquired bus name org.freedesktop.DisplayManager
[+0.17s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0
[+0.70s] DEBUG: Loading users from org.freedesktop.Accounts
[+0.70s] DEBUG: User /org/freedesktop/Accounts/User1000 added
[+2.76s] DEBUG: Got signal 10 from process 2098
[+2.76s] DEBUG: DisplayServer x-0: Got signal from X server :0
[+2.76s] DEBUG: DisplayServer x-0: Connecting to XServer :0
[+2.76s] DEBUG: DisplayServer x-0: Error connecting to XServer :0
[+3.36s] DEBUG: Got signal 10 from process 2098
[+3.84s] DEBUG: Got signal 10 from process 2098
[+4.30s] DEBUG: Got signal 10 from process 2098
-
:o tak nakonec opět sám, vadil tomu teamviewer, nechápu, ale verze je 10.0.35002
akorát teda přes monitor trošku běhají nějaké trošku pruhy, resp duši. Ale to už bude HW.
A když tu teda mam ten dotaz, neznáte nějaké lepší drivery než ty obecné? V dodatečných ovladačích není nic nabízeno.
-
Osobně mám s GK MX400 a MX440 obecně velmi špatné zkušenosti, jak pod systémy založenými na Ubuntu, tak pod Windows. Neměl jsem v ruce kus, který by šlapal bez problému.
V Lubuntu i Xubuntu mi např. mi tyto GK zobrazují volné bílé pole tam kde má být text a ten se někdy objeví, až když se tam najede šipkou, jindy kus textu začerní obdelníkem a už plymouth obrázek zobrazují jako směs barev s různými fleky apod.
-
Uhh, to neni hezké. No ale stejně flash, TeamViewer, chrome, chromium a ani další nejedou, je mo moc stary procesor. To asi vidim na nějaký rok a šrot.